Mapping issue in FIle to IDoc

Hello friends,
In file to IDoc scenario,
Source structure is
1: header
n: itemdetails
For Item details, IDoc structure has got 2 sub segments under E1EDP01 segment. as below.
E1EDP01
--E1EDP02
--E1EDP26
When I try to post message with multiple line items, I am getting as below
E1EDP01
--E1EDP02
--E1EDP02
--E1EDP26
--E1EDP26
E1EDP01(no sub sement).
But the expected result is as below.
E1EDP01
--E1EDP02
--E1EDP26
E1EDP01
--E1EDP02
--E1EDP26
Please help me in this regard.
Many thanks
Sam
Edited by: Guest on Mar 18, 2008 7:41 PM
Edited by: Guest on Mar 18, 2008 7:43 PM

Hi,
just put a split by value in the mappings for E1EDP02 and E1EDP26:
field1>Split By Value\[Each Value\]>E1EDP02
field2>Split By Value\[Each Value\]>E1EDP26
Reward points if helpful.
Sankar Choudhury

Similar Messages

Lookup issue for File to Idoc scenario-- Urgent Pls.

Hi All,
Iam doing File to IDoc scenario with one file --> any of 3 R/3 systems.
Routing has to be done dynamically using a lookup file, based on the incoming GLN code and last character of the Order Reference number.
The last character of the Order ref Num will have A,B or C.
Where, ' A' for R/3 152 Client
             ' B' for R/3 142 Client
             'C' for R/3 132 Client.
1. PlantGLN_Routing lookup file :
DestinationSystem,   Plant GLNCode,       Partner Number,
A,                            5000243000473,         GDKDVRC152,
B,                            5000243000473,         GDKDVRC142,
C,                            5000243000473,         GDKDVRC132,
A                                 500034000487           GDKDVRC152,
B                                 500034000487           GDKDVRC142,
C                                 500034000487           GDKDVRC132,
By Using DestinationSystem and Plant GLN Code as lookup key --> I need to get the value of partner system.
2. IdocCtrlLookup
Purpose: To read the IdocCtrlLookup file to populate the Idoc control segment
Now based on the partner system from previous table --> I need to get the details of Sender Port , Sender Partner Type , Sender Partner Function , Sender Partner Number , Rx Port , Rx Partner Type , Rx Partner Function , Rx Partner Number.
Please help me how can acheive this scenario with the help of lookups.
Its very urgent.
Regards
Krupakar.

HI,
Here you would have to use one mapping for dynamic routing , based on this create IM and use it in receiver determination.
the another mapping is general to file to idoc.
see the dynamic routing link here
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping -
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Also if you know the field name the context object can be defined for partner no that can be used in receiver determination in condition. to particular partner no in receiver determination.
Regards
Chilla

Mapping Requirement for File to IDOC

Hi All,
I have a requirement related to Mapping and need your help on this. There is a financial posting Interface and the data is being fetched from database using strored procedure.
The source file is having structure like as shown below
<FIExport>
    <resultset>
         <row>
           <headerid>12345</header id>
            <field2>5</field2>
           <field3>1</field3>
           <field4>29</field4>
           <field5>3</field5>
          </row>
         <row>
           <headerid>12345</header id>
            <field2>5</field2>
           <field3>1</field3>
           <field4>48</field4>
           <field5>3</field5>
          </row>
         <row>
           <headerid>12345</header id>
            <field2>5</field2>
           <field3>1</field3>
           </field4>
           <field5>3</field5>
          </row>
          <row>
           <headerid>12346</header id>
            <field2>5</field2>
           <field3>1</field3>
           <field4>2</field4>
           <field5>3</field5>
          </row>
         <row>
           <headerid>12347</header id>
            <field2>5</field2>
           <field3>1</field3>
           <field4>2</field4>
           <field5>3</field5>
          </row>
      </resultset>
    </FIExport>
Condition:
For creating target structure follwoing conditions are required
1) IDOC at receiver side will be created as per unique header id therefore in the current source structure 3 Idocs will be created for 3 unique header id like 12345 , 12346 , 12347
2) Target EIFISEG which is line item will be created based on per row per unique header id under each IDOC and there has to be 2 SEGMENTS (2A & 2B ) per row based on the VAT amount presence and also two additional E1FISEG has to be created statically per idoc for BSCHL = 34
so for the above source structure the target should have number of EIFISEG as follows:
As there are 3 rows for header id 12345, therefore under IDOC1 the number of EIFISEG will be
since VAT Amount(field 4) is present therefore for 2rows of 12345 header id IDOC it will generate 2X2=4 , E1FISEG segments (each for 2A & 2B) and 1 E1FISEG for 3 row of header id IDOC 12345.
In addition to this 2 additional segment will be created for BSCHL=34( it's duplicate segment of E1FISEG, so no issues in this)
Total number of E1FISEG segments in IDOC for header id(12345) will be = 4 + 1 + 2 = 7 segments
Similarly for IDOC with header id (12346) the total number of EIFISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
Similarly for IDOC with header id(12347) the total number of E1FISEG will be = 2( 2A & 2B as vat amount (field 4) is present + 2(bschl =34) = 4 segments
So the target strcuture should look like:
Target Structure
IDOC1 for header id= 12345
    E1FIKPF
        field 1
          E1FISEG1
            field 2
          E1FISEG2
            field 2
          E1FISEG3
            field 2
          E1FISEG4
             field 2
          E1FISEG5
             field 2
          E1FISEG6
              field 2
          E1FISEG7
              field 2
IDOC1 for header id= 12346
    E1FIKPF
        field 1
          E1FISEG1
            field 2
          E1FISEG2
            field 2
          E1FISEG3
            field 2
          E1FISEG4
             field 2
IDOC1 for header id= 12347
    E1FIKPF
        field 1
          E1FISEG1
            field 2
          E1FISEG2
            field 2
          E1FISEG3
            field 2
          E1FISEG4
             field 2
Please help me to complete this mapping requirement as it seems to be complex.
Thanks & Regards
Prabhat

Hi,
There was one typo mistake, the TARGET structure will be
Target Structure
IDOC1 for header id= 12345
   E1FIKPF
     field 1
         E1FISEG1
           field 2
         E1FISEG2
           field 2
         E1FISEG3
           field 2
         E1FISEG4
            field 2
         E1FISEG5
            field 2
         E1FISEG6
            field 2
         E1FISEG7
            field 2
IDOC2 for header id= 12346
      E1FIKPF
        field 1
           E1FISEG1
              field 2
           E1FISEG2
              field 2
           E1FISEG3
              field 2
           E1FISEG4
              field 2
IDOC3 for header id= 12347
           E1FIKPF
               field 1
                 E1FISEG1
                    field 2
                 E1FISEG2
                    field 2
                 E1FISEG3
                    field 2
                 E1FISEG4
                    field 2
Thanks & Regards
Prabhat

Mapping issue in jdbc to idoc scenario

Hi
we have a jdbc to idoc scenario , we need to repeat the segment given below which has only two fields FLDGRP and FLDVAL,
both filed_Group and fieldgroup1 is coming simultaneously . when field group =BATCH, batch=FLDVAL and fieldgroup1=CUST cust_code=FLDVAL
mapping is as follows :
E1WXX01 (segment name) occurance 0:9999999999
fieldgroup----
> FLDGRP
batch----
>FLDVAL
fieldgroup1----
>FLDGRP(same filed as above )
cust_code----
>FLDVAL(same filed as above)
pl sugggest how to map using graphical mapping
rgds
arun

I see the problem here... hmmm.. It is simple
You need to just duplicate the E1WXX01 segment by right clicking and pressing Duplicate Subtree.
Once you do duplication of segment then you will have two segments of E1WXX01.
In first segment map
> fieldgroup----
> FLDGRP
> batch----
>FLDVAL
and in second segment of E1WXX0, map
> fieldgroup1----
>FLDGRP
> cust_code----
>FLDVAL
Regards,
sarvesh

Catch Mapping Error in File to IDoc scenario

Configured BPM and now learning Error Handling. I know that through BPM we can handle system Errors, but I doubt whether Mapping error is a system error.
I am interested to know the classification of errors with examples, preferably listing out all types of errors.
Please provide some weblogs or explain briefly how to handle system and application errors through BPM.
Thanks,
Raja

Hi Raja,
You will need CCMS if you want to send the Alerts to external system or you want to access the ALerts from the transaction. You can capture your alerts without this also.
When you go to Alert Configuration in the Runtime Workbench you can see Create Alert Rules. These rules are pertaining to the error generated in your AF,AE or IE.
Once you have completed the whole config. The error happening in the AE, IE or AF would trigger the alert. you can see this in your Alert Inbox.
The best would be if you go through the URL I have mentioned below.
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
You have to use BPM only if you want to do an activity after the alerts are raised.
Regards
Vijaya
Message was edited by: vijaya kumari

File to idoc mapping error

Hi,
I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
imeException in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
Is it due to some mapping error or some basis config issue?
Thanks,
Jassi

Hi Jassi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
Check the following link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Amaresh

File To IDOC Scenario issue

Hello Friends,
I am facing an issue during File To IDOC Scenario.
Sender side: Text file
It contains data:
name,surname,7894561230 i.e. phone no.
My sendor data type is also desined in same way.
I am facing given below wrror in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_file_to_idoc_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idoc_:</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'.
I tested message mapping. It is working fine.
Kindly suggest me for above error. How I can resolve it?
Regards,
Narendra

It contains data:
name,surname,7894561230 i.e. phone no.
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idocc
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'
can you tell in what format is your source structure? I mean is it an XML or a CSV file?
If it is a CSV file then you need FCC....but then in this case the error should have been thrown by the channel itself and the message wont have come till mapping step....
If your source file is really in csv format then apply FCC....many blogs, references are readily available on SDN.
Regards,
Abhishek.

Mapping of Control records in file to idoc scenario

Hi,
In the mapping part of file to idoc scenario is it necessary to provide the exact control record details
or will it pick what ever is mentioned ? Can any one please explain regarding the same?
Many Thanks,
Sharath

hi,
in case of apply control records from payload
It is indeed very simple to do it and the feature is available from SP10. I have seen lot of posts on the forum for the same and that is the reason for this blog. We can manipulate the control record in the mapping editor and map the EDI_DC40 segment of Idoc as required. Most of the times we need to map only SNDPRN, RCVPRN, SNDPRT, RCVPRT for posting Idocs with appropriate partner profiles in SAP R/3 destination systems. We can disable the rest of the fields as shown below. We need to manually change the control record of idoc for populating partner profiles in the control records while dealing with non-sap sender system, which will be used by receiver SAP system for posting idocs with appropriate ALE configurations.
check this blog
/people/sravya.talanki2/blog/2005/12/02/manipulating-idoc-control-records-from-payload
regards
chandra

File to Idoc Mapping Problem

Hi all,
i'm getting an error from SXMB_MONI in a scenario File to Idoc.
I have done the mapping from source file and Idoc CREMAS03, when i try to test from Integration Repository it's all ok, but when the scenario is executed i find this error in Idoc Adapter :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
The field BEGIN in idoc structure is filled with constant value 1, than i dont understand the error.
This is the xml source file :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Vendor xmlns:ns0="urn:tbit40:workshop:group01:legacy">
- <Address>
<Country>IT</Country>
<Zip>001</Zip>
<City>ROMA</City>
<Street>SATTA</Street>
</Address>
<Currency>USD</Currency>
<SearchTerm>TEST</SearchTerm>
<LastName>GUIDA</LastName>
<VendorNumber>44332</VendorNumber>
</ns0:Vendor>
Any help is really appreciated.
Thanks.

Hi all and thanks for your answer.
My problem is that for what i can see all Idoc attribute (like the attribute BEGIN) are mapped with constant value.
In taget source i can see : BEGIN = Constant([value=1])
What i dont understand is why when i execute the scenario it ends with this message :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
It seem to me that the tag BEGIN is not filled with value, i also tried to copy the source xml file directly from SXMB_MONI (from payload) and test it in Integration Repository mapping section, but here is all ok and the test end succesfully.

Mapping not sufficiently defined FILE TO IDOC(HRMD_A.HRMD_A06) scenerio

Hello friends,
In message mapping part from File to IDOC. I am doing mapping of infotype 14 message type with the corresponding idoc. But when I activate it I am getting the following error:
Activation of the change list canceled Check result for Message Mapping MM_INF14_LS | urn:tcs:test: Mapping not sufficiently defined
As far as I know I have properly mapped the fields which I am picking from the file. But I am not very sure what to do woth few fields in the IDOC which appear to be red in message mapping
Kindly give me the solution.
Regards,
Lokesh

Thanx guys...I tried changing the description of other mappings whch were already activated. And thn I tried activating I got the same error:
Activation of the change list canceled Check result for Message Mapping MM_02IT | urn:tcs:payroll: Starting compilation Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
what possibly can go wrong? Is there any way to activate it.
Looking forward for ur reply.
Regards,
Lokesh

Mapping file to IDOC "DELVRY03" segment E1ADRM1

Hi all,
i have a problem to map a text file to idoc "DELVRY03" using segment E1ADRM1.
My text file has 2 fields : CUSTOMER_CODE & VENDOR_CODE
Source mapping : Text File
Target mapping : IDOC "DELVRY03"
IDOC should be filled in the following way :
First entry:
PARTNER_ID = CUSTOMER_CODE
PARTNER_Q = AG
Second entry:
PARTNER_ID = VENDOR_CODE
PARTNER_Q = WE
How can i fill the idoc structure?
Thanks in advance.
Regards.
Dario.

Hi Harish,thanks for your reply.
I tried to duplicate segment E1ADRM1 but PI system gets me this error :
"Target structure has no such path: /DELVRY03/IDOC/E1EDL20/E1ADRM1[1]/PARTNER_ID. Skipping mapping"
Pls, how can i solve this problem?
Thanks in advance.
Dario.

ABAP mapping - File to Idoc

Hi All,
I want help on ABAP mapping to perform File to Idoc posting.
Kindly provide any sample code / document for this.?
Thanks.
Ramiz.

Hi
Please do a search before posting.
This link will provide you all about abap mapping.
https://www.sdn.sap.com/irj/scn/advancedsearch?query=abap+mapping&cat=sdn_all
Thanks
Saiyog

Mapping issue: FCC: Idoc for each record in file

Hi,
I have file to Idoc scenario.
I receive csv file with multiple records.
The requirement is to create an Idoc for each record.
For eg.
source file
A1,B1,C1
A2,B2,C2
A3,B3,C3
After FCC
<MT>
<TRANS>
<ROW>
<A>A1</A>
<B>B1</B>
<C>C1</C>
</ROW>
<ROW>
<A>A2</A>
<B>B2</B>
<C>C2</C>
</ROW>
<ROW>
<A>A3</A>
<B>B3</B>
<C>C3</C>
</ROW>
</TRANS>
<MT>
I have first tested it with only 1 record to test end to end connectivity. It works as expected and Idoc is posted to target system.
Now when I am trying to send multiple records, I am getting some issues.
Below are the steps that I have taken to process multiple records:
1. Changed the cardinality of ROW (child of RecordSet) from 1 to Unbounded.
2. Changed the occurance of Idoc to Unbounded.
3. Mapped ROW to Idoc root.
I have tested the mapping in IR and it generates multiple IDOCs.
When I send the test file, it fails with error Tag found instead of tag IDOC BEGIN=
I can see the xml message created with multiple ROWs in XI by File adapter in sxmb_moni.
When I do Test Configuration in ID, with the XML message extracted from sxmbmoni, the result that I got was:_
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
This means that idoc was not created while mapping.
But the same sample message works OK in IR!
Pls help where I have missed.
Regards,
Anirudh.

Sudhir,
Thanks for your response.
FCC is working fine. I have taken the XML message in XI created after FCC from csv sample message.
I have tested this message in IR by placing it between
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
</ns0:Message1>
</ns0:Message>
It is working fine and Idocs are created in mapping in IR.
But the same sample message is creating below output ID!
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1></ns0:Message1></ns0:Messages>
Regards,
Anirudh.

File - XI - Idoc : mapping issue

Hello gurus,
I have a mapping issue:
I have a mapping between FICABillingNotification to FKK_EBS_DOC_TREE
Some fields are mapped one to one, others a mapped to constants.
But for some reason i don't know, not all fields get the right value.
For example:
Working:
Constant 1 --> BEGIN
Constant LS --> RCVPRT (Receiver Partner Type)
Not working:
Constant FILE-->RCVPOR (Receiver Port)
I had an other value the first time i tried it, but now i changed it to FILE but this value is not used by the mapping.
Any help would be welcome
Thanks
Thomas
Edited by: Thomas Pary on May 28, 2008 3:36 PM

This was allready done (sorry i didn't answered that question).
But Ok now i see, that for this RCVPOR the value of the constant "FILE" is mapped, and i can see it in the payload in SXMB_MONI after the mapping. But it isn't populated to the IDoc field :-s
Another problem is, that like the one said above, some of my values are not mapped :
<FICAExternalBilling>
--<DocumentHeader> mapped to EF1KK_EBS_DOC_HEADER
<BillFromId>25001254</BillFromId> mapped to REF_DOC_NUMBER
<PostingDate>20080520</PostingDate> mapped to POST_DATE
<DocumentDate>20080520</DocumentDate> mapped to DOC_DATE
<OriginTypeId>IV</OriginTypeId> mapped to EXT_DOC_TYPE
<ObjectType/>
<ObjectKey/>
<PendingCommitmentGroupID/>
<InvoiceReferenceID/>
<DisputeDocumentReferenceID/>
--</DocumentHeader>
The value of OriginTypeId is not mapped, but the value of DocumentDate and PostingDate are mapped.

Mapping and Interfacing files into R/3 as IDOCs using XI

We are trying to send an IDOC into R/3 thru XI. We generated one from R/3 into XI - it worked fine, however the reverse direction is not working well.
We are using XI 2.0 with R/3 4.6C.
We ran into two problems:
when we tried DEBMAS/DEBMAS06, we were getting a message in SXMB_MONI / IDX5 that the entry DEBMAS06 is not found (in table IDOCSYN) on XI. On our XI server we found that there were only 65 IDOC message types defined (I dont know why .. but none of the popular IDOC messages like DEBMAS, CREMAS, MATMAS, ORDERS, etc are in XI). We thought may be that is the reason. But we do not know thru config, how to add IDOC messages into XI - this is not the same as importing IDOC type .. we have already done that. Just importing an IDOC structure does not put an entry in tables like IDOCSYN, and others...
Then we tried using an IDOC message that was in XI IDOC tables - FLIGHT_SAVEREPLICA. This ones gets past the error we got with DEBMAS. However, we still do not see the IDOC in R/3. When we check IDX5 or SXMB_MONI, it says that the message is processed successfully and does not show any errors. We are not understanding why it does not reach R/3.
Has anyone mapped files into IDOCs and sent to R/3 thru XI. If you did, CAN YOU PLEASE HELP US OUT....
It looks like we are missing small config step .. somewhere ..
We created partner profiles, set up ports and RFC destinations. IN SLD we did define the logical systems. On the surface, from the config everything seems fine.
OSS note 669669 is already in.
Any help will be greatly appreciated ...

> We are trying to send an IDOC into R/3 thru XI. We
> generated one from R/3 into XI - it worked fine,
> however the reverse direction is not working well.
> We are using XI 2.0 with R/3 4.6C.
>
> We ran into two problems:
> when we tried DEBMAS/DEBMAS06, we were getting a
> message in SXMB_MONI / IDX5 that the entry DEBMAS06
> is not found (in table IDOCSYN) on XI. On our XI
> server we found that there were only 65 IDOC message
> types defined (I dont know why .. but none of the
> popular IDOC messages like DEBMAS, CREMAS, MATMAS,
> ORDERS, etc are in XI). We thought may be that is the
> reason. But we do not know thru config, how to add
> IDOC messages into XI - this is not the same as
> importing IDOC type .. we have already done that.
> Just importing an IDOC structure does not put an
> entry in tables like IDOCSYN, and others...
You need to change the outbound version to a lower version. ie send debmas03 not 06.
This is an ALE to ALE issue. Not XI related.
> Then we tried using an IDOC message that was in XI
> IDOC tables - FLIGHT_SAVEREPLICA. This ones gets past
> the error we got with DEBMAS. However, we still do
> not see the IDOC in R/3. When we check IDX5 or
> SXMB_MONI, it says that the message is processed
> successfully and does not show any errors. We are not
> understanding why it does not reach R/3.
>
Trace time....
> Has anyone mapped files into IDOCs and sent to R/3
> thru XI. If you did, CAN YOU PLEASE HELP US OUT....
>
> It looks like we are missing small config step ..
> somewhere ..
>
> We created partner profiles, set up ports and RFC
> destinations. IN SLD we did define the logical
> systems. On the surface, from the config everything
> seems fine.
> OSS note 669669 is already in.
>
> Any help will be greatly appreciated ...
Use SXI_SUPPORT and follow it in debug...
Cant tell what else is wrong.

Mapping issue in FIle to IDoc

Similar Messages

Maybe you are looking for