Mapping of various internal tables into one existing excel

Hi all,
i have a problem regarding conversion into existing excel sheet.
Actually i have multiple reports and i have to convert all them into an existing excel sheet.. How is it possible please guide.
Edited by: Ram Shanker on Oct 30, 2009 10:37 AM

Hi Ram,
You can merge different internal table data to a single worksheet in an excel ;
or you can keep each internal table data in separate worksheets in a single excel.
Both ways are possible using OLE technique.
Refer this link.
https://wiki.sdn.sap.com/wiki/display/Snippets/DownloadDataintoMultipleSheetExcelDocumentwithNonEditableColumns%28Passwordprotected%29UsingABAP+OLE
Thanks,
Nisha Vengal.

Similar Messages

How to consolidate 4 internal table into one

how can we consolidate data from
two or more internal tables into one
please help
its a bit uegent
thanks in advance

Hi,
If you want to combine two internal table,you can follow 2 approaches.
Case1: If both the internal table are of same structure,
append lines of itab1 to itab2.
The above statement will append all the records in itab1 to itab2.
Case2:If both the internal table are of differnt structure,
you need one or more common fields in the two tables to connect.
loop at itab1.
move-corresponding itab1 to itab.
loop at itab2 where f1 = itab1-f1.
move-corresponding itab2 to itab.
append itab.
clear : itab2, itab.
endloop.
clear itab1.
endloop.
Now itab will hold the entries from itab1 and itab2.

Merge 2 internal tables into one and show first record from common fields

Hello PPl,
 I have 3 tables kna1 knb1 and knvp i have to join kna1 and knb1 on kunnr and move the data into an internal table it_data then on the basis of that data in it_data i have to retrieve records FOR ALL ENTRIES from KNVP and move it into it_knvp.
Then both it_data and it_knvp should be merged in it_alv and from that internal table report has to be displayed.
[NOTE: i had tried using loop twice but the report got messed up]
Apart from that for these set of values
0000000004
0000000418
0000000954
0000001190
0000001222
0000001451
0000001453
0000001455
0000001470
0000001508
finally knvp is showing records in such a way that for 2 records kunnr is same and so does all the other fields except PARZA and KUNN2 so the req. is to display only the first record among 2.
Plz help me by providing code for that its urgent......
Below i m providing my code so far, i hope it will be of some help.
TREMENDOUS REWARD POINTS GURANTEED!!!!!
REPORT zfanz_alv_report_whv.
TYPE-GROUPS *
TYPE-POOLS: slis.
TYPES *
TYPES: BEGIN OF ty_data,
 kunnr TYPE kunnr,
 ort01 TYPE ort01,
 pstlz TYPE pstlz,
 regio TYPE regio,
 bukrs TYPE bukrs,
 zterm TYPE zterm,
 END OF ty_data,
 BEGIN OF ty_knvp,
 vkorg TYPE vkorg,
 vtweg TYPE vtweg,
 spart TYPE spart,
 parvw TYPE parvw,
 parza TYPE parza,
 kunn2 TYPE kunn2,
 lifnr TYPE lifnr,
 END OF ty_knvp,
 BEGIN OF ty_alv,
 kunnr TYPE kunnr,
 ort01 TYPE ort01,
 pstlz TYPE pstlz,
 regio TYPE regio,
 bukrs TYPE bukrs,
 zterm TYPE zterm,
 vkorg TYPE vkorg,
 vtweg TYPE vtweg,
 spart TYPE spart,
 parvw TYPE parvw,
 parza TYPE parza,
 kunn2 TYPE kunn2,
 lifnr TYPE lifnr,
 END OF ty_alv,
 BEGIN OF ty_kna1,
 kunnr TYPE kunnr,
 END OF ty_kna1,
 BEGIN OF ty_knb1,
 bukrs TYPE bukrs,
 END OF ty_knb1.
*DATA: IT_KNVP TYPE KNVP,
DATA: it_knvp TYPE STANDARD TABLE OF ty_knvp WITH HEADER LINE.
DATA: it_data TYPE STANDARD TABLE OF ty_data WITH HEADER LINE.
Report data to be shown.
DATA: it_alv TYPE STANDARD TABLE OF ty_alv WITH HEADER LINE.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*DATA: fieldcatalog type standard table of slis_fieldcat_alv with header
*line.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
*TABLES
tables:knvp,kna1,knb1.
 CONSTANTS *
CONSTANTS: c_kunnr TYPE char5 VALUE 'KUNNR',
c_ort01 TYPE char5 VALUE 'ORT01',
c_pstlz TYPE char5 VALUE 'PSTLZ',
c_regio TYPE char5 VALUE 'REGIO',
c_bukrs TYPE char5 VALUE 'BUKRS',
c_zterm TYPE char5 VALUE 'ZTERM',
c_vkorg TYPE char5 VALUE 'VKORG',
c_vtweg TYPE char5 VALUE 'VTWEG',
c_spart TYPE char5 VALUE 'SPART',
c_parvw TYPE char5 VALUE 'PARVW',
c_parza TYPE char5 VALUE 'PARZA',
c_kunn2 TYPE char5 VALUE 'KUNN2',
c_lifnr TYPE char5 VALUE 'LIFNR'.
WORKAREA *
DATA: wa_data TYPE ty_data,
 wa_knvp TYPE ty_knvp,
 wa_alv TYPE ty_alv,
 wa_fcat TYPE slis_fieldcat_alv,
 wa_layout TYPE slis_layout_alv.
======================= Selection Screen ==========================
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*DATA: wa_kunnr LIKE kna1-kunnr,
 wa_bukrs LIKE knb1-bukrs,
 wa_vkorg LIKE knvp-vkorg,
 wa_vtweg LIKE knvp-vtweg,
 wa_spart LIKE knvp-spart,
 wa_parvw LIKE knvp-parvw.
SELECT-OPTIONS *
SELECT-OPTIONS s_kunnr FOR kna1-kunnr NO INTERVALS OBLIGATORY
SELECT-OPTIONS: s_bukrs FOR knb1-bukrs NO-EXTENSION NO INTERVALS,
s_vkorg FOR knvp-vkorg NO-EXTENSION NO INTERVALS,
s_vtweg FOR knvp-vtweg NO-EXTENSION NO INTERVALS,
s_spart FOR knvp-spart NO-EXTENSION NO INTERVALS,
s_parvw FOR knvp-parvw NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN: END OF BLOCK b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN ON s_kunnr.
PERFORM validate_data.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM get_data. "fetch data from table and perform join on them
PERFORM final_table.
PERFORM build_fieldcatalog. "populate field catalog
PERFORM build_layout.
PERFORM grid_display. "display the result in ALV grid
END-OF-SELECTION *
END-OF-SELECTION.
describe
SUBROUTINES (FORMS)
*& Form get_data
 Gets the information to be shown in the report.
 Join on tables KNA1, KNB1 and for all enteries in KNVP
--> p1 text
<-- p2 text
FORM get_data.
SELECT kna1~kunnr
kna1~ort01
kna1~pstlz
kna1~regio
knb1~bukrs
knb1~zterm
INTO TABLE it_data
FROM kna1 INNER JOIN knb1
ON kna1kunnr = knb1kunnr
 WHERE kna1~kunnr IN s_kunnr
 AND knb1~bukrs IN s_bukrs.
SELECT vkorg
 vtweg
 spart
 parvw
 parza
 kunn2
 lifnr
 INTO TABLE it_knvp FROM knvp
 FOR ALL ENTRIES IN it_data
 WHERE knvp~kunnr = it_data-kunnr
 AND vkorg IN s_vkorg
 AND vtweg IN s_vtweg
 AND spart IN s_spart
 AND parvw IN s_parvw.
ENDFORM. " get_data
*ENDFORM. " get_data
*& Form FINAL_TABLE
 text
--> p1 text
<-- p2 text
FORM final_table .
LOOP AT it_data.
 it_alv-kunnr = it_data-kunnr.
 it_alv-ort01 = it_data-ort01.
 it_alv-pstlz = it_data-pstlz.
 it_alv-regio = it_data-regio.
 it_alv-bukrs = it_data-bukrs.
 it_alv-zterm = it_data-zterm.
 APPEND it_alv.
 CLEAR it_alv.
ENDLOOP.
LOOP AT it_knvp.
 it_alv-vkorg = it_knvp-vkorg.
 it_alv-vtweg = it_knvp-vtweg.
 it_alv-spart = it_knvp-spart.
 it_alv-parvw = it_knvp-parvw.
 it_alv-parza = it_knvp-parza.
 it_alv-kunn2 = it_knvp-kunn2.
 it_alv-lifnr = it_knvp-lifnr.
 APPEND it_alv.
 CLEAR it_alv.
ENDLOOP.
ENDFORM. " FINAL_TABLE
*& Form BUILD_FIELDCATALOG
 Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
IF it_alv[] IS NOT INITIAL.
 wa_fcat-fieldname = c_kunnr.
 wa_fcat-seltext_l = 'Customer Master'(001).
 wa_fcat-col_pos = 1.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_ort01.
 wa_fcat-seltext_l = 'City'(002).
 wa_fcat-col_pos = 2.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_pstlz.
 wa_fcat-seltext_l = 'Postal Code'(003).
 wa_fcat-col_pos = 3.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_regio.
 wa_fcat-seltext_l = 'Region'(004).
 wa_fcat-col_pos = 4.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_bukrs.
 wa_fcat-seltext_l = 'Company Code'(005).
 wa_fcat-col_pos = 5.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_zterm.
 wa_fcat-seltext_l = 'Terms of payment'(006).
 wa_fcat-col_pos = 6.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_vkorg.
 wa_fcat-seltext_l = 'Sales Organization'(007).
 wa_fcat-col_pos = 7.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_vtweg.
 wa_fcat-seltext_l = 'Distribution Channel'(008).
 wa_fcat-col_pos = 8.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_spart.
 wa_fcat-seltext_l = 'Division'(009).
 wa_fcat-col_pos = 9.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_parvw.
 wa_fcat-seltext_l = 'Partner function'(010).
 wa_fcat-col_pos = 10.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_kunn2.
 wa_fcat-seltext_l = 'Customer number of partner'(011).
 wa_fcat-col_pos = 11.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_lifnr.
 wa_fcat-seltext_l = 'Account Number of Vendor'(012).
 wa_fcat-col_pos = 12.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
 wa_fcat-fieldname = c_parza.
 wa_fcat-seltext_l = 'Partner counter'(013).
 wa_fcat-col_pos = 13.
 APPEND wa_fcat TO fieldcatalog.
 CLEAR wa_fcat.
*fieldcatalog-fieldname = c_kunnr.
 fieldcatalog-seltext_l = 'Customer Master'(001).
 fieldcatalog-col_pos = 1.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_ort01.
 fieldcatalog-seltext_l = 'City'(002).
 fieldcatalog-col_pos = 2.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_pstlz.
 fieldcatalog-seltext_l = 'Postal Code'(003).
 fieldcatalog-col_pos = 3.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_regio.
 fieldcatalog-seltext_l = 'Region'(004).
 fieldcatalog-col_pos = 4.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_bukrs.
 fieldcatalog-seltext_l = 'Company Code'(005).
 fieldcatalog-col_pos = 5.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_zterm.
 fieldcatalog-seltext_l = 'Terms of payment'(006).
 fieldcatalog-col_pos = 6.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_vkorg.
 fieldcatalog-seltext_l = 'Sales Organization'(007).
 fieldcatalog-col_pos = 7.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_vtweg.
 fieldcatalog-seltext_l = 'Distribution Channel'(008).
 fieldcatalog-col_pos = 8.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_spart.
 fieldcatalog-seltext_l = 'Division'(009).
 fieldcatalog-col_pos = 9.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_parvw.
 fieldcatalog-seltext_l = 'Partner function'(010).
 fieldcatalog-col_pos = 10.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_kunn2.
 fieldcatalog-seltext_l = 'Customer number of partner'(011).
 fieldcatalog-col_pos = 11.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_lifnr.
 fieldcatalog-seltext_l = 'Account Number of Vendor'(012).
 fieldcatalog-col_pos = 12.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
 fieldcatalog-fieldname = c_parza.
 fieldcatalog-seltext_l = 'Partner counter'(013).
 fieldcatalog-col_pos = 13.
 APPEND fieldcatalog TO fieldcatalog.
 CLEAR fieldcatalog.
ENDIF.
ENDFORM. " BUILD_FIELDCATALOG
*& Form build_layout
 text
--> p1 text
<-- p2 text
form build_layout .
Set layout field for field attributes(i.e. input/output)
wa_layout-stylefname = 'FIELD_STYLE'.
wa_layout-zebra = 'X'.
endform. " build_layout
*& Form GRID_DISPLAY
 text
FORM grid_display. "using t_data type ty_tbl_data.
IF it_alv[] IS NOT INITIAL.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 IS_LAYOUT = wa_layout
 it_fieldcat = fieldcatalog[]
 TABLES
 t_outtab = it_alv[]
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
ENDIF.
ENDFORM. "GRID_DISPLAY
*& Form VALIDATE_DATA
 text
--> p1 text
<-- p2 text
FORM validate_data .
DATA : li_kna1 TYPE STANDARD TABLE OF ty_kna1,
 li_knb1 TYPE STANDARD TABLE OF ty_knb1,
 li_knvp TYPE STANDARD TABLE OF ty_knvp.
SELECT kunnr
FROM kna1
INTO TABLE li_kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc <> 0.
 MESSAGE 'Invalid Customer Number'(013) TYPE 'E'.
ENDIF.
SELECT bukrs
FROM t001
INTO TABLE li_knb1
WHERE bukrs IN s_bukrs.
 IF sy-subrc <> 0.
 MESSAGE 'Invalid Company Code'(014) TYPE 'E'.
 ENDIF.
 SELECT vkorg
 FROM tvko
 INTO TABLE li_knvp
 WHERE vkorg IN s_vkorg.
 IF sy-subrc <> 0.
 MESSAGE 'Invalid Sales Organization'(015) TYPE 'E'.
 ENDIF.
 SELECT vtweg
 FROM tvtw
 INTO TABLE li_knvp
 WHERE vtweg IN s_vtweg.
 IF sy-subrc <> 0.
 MESSAGE 'Invalid Distribution Channel'(016) TYPE 'E'.
 ENDIF.
 SELECT spart
 FROM tspa
 INTO TABLE li_knvp
 WHERE spart IN s_spart.
 IF sy-subrc <> 0.
 MESSAGE 'Invalid Division'(017) TYPE 'E'.
 ENDIF.
 SELECT parvw
 FROM tpar
 INTO TABLE li_knvp
 WHERE parvw IN s_parvw.
 IF sy-subrc <> 0.
 MESSAGE 'Invalid Partner function'(018) TYPE 'E'.
 ENDIF.
 ENDFORM. " VALIDATE_DATA

*1----
FORM get_data.
SELECT kna1~kunnr
kna1~ort01
kna1~pstlz
kna1~regio
knb1~bukrs
knb1~zterm
INTO TABLE it_data
FROM kna1 INNER JOIN knb1
ON kna1kunnr = knb1kunnr
 WHERE kna1~kunnr IN s_kunnr
 AND knb1~bukrs IN s_bukrs.
CHECK it_data[] IS NOT INITIAL.
SELECT kunnr
 vkorg
 vtweg
 spart
 parvw
 parza
 kunn2
 lifnr
 INTO TABLE it_knvp FROM knvp
 FOR ALL ENTRIES IN it_data
 WHERE kunnr = it_data-kunnr
 AND vkorg IN s_vkorg
 AND vtweg IN s_vtweg
 AND spart IN s_spart
 AND parvw IN s_parvw.
IF sy-subrc EQ 0.
 SORT it_knvp BY kunnr.
ENDIF.
ENDFORM. " get_data
*2----
FORM final_table .
LOOP AT it_data INTO wa_data.
 READ TABLE it_knvp
 INTO wa_knvp
 WITH KEY kunnr = wa_data-kunnr
 BINARY SEARCH .
 IF sy-subrc = 0.
 MOVE-CORRESPONDING wa_data TO wa_alv.
 MOVE-CORRESPONDING wa_knvp TO wa_alv.
 APPEND wa_alv TO it_alv.
 ENDIF.
ENDLOOP.
ENDFORM. " FINAL_TABLE
Edited by: Faisal Khan on Mar 27, 2008 1:59 PM

Convert multiple rows of internal table into one row of internal table

Hi everyone,
I have an internal table of structure
Objid - Sobid
1 - A
1 - B
1 - C
1 - D
2 - a
2 - b
Now I have to show this in ALV format
Objid - Sobid1- Sobid2 -Sobid3 -Sobid4 -Sobid5
1 - A - B - C - D
2 - a - b
Kindly help me it's urgent.
bye

Hi sandip,
sorry i make a mistake. I have not seen that you will have it in ALV.
Try this an use itab1-txt in your alv:
DATA: BEGIN OF ITAB OCCURS 0,
OBJID(1),
DUMMY(1) VALUE '-',
SOBID(1),
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
txt(20),
END OF ITAB1.
ITAB-OBJID = '1'. ITAB-SOBID = 'A'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'B'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'C'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'D'. APPEND ITAB.
ITAB-OBJID = '2'. ITAB-SOBID = 'a'. APPEND ITAB.
ITAB-OBJID = '2'. ITAB-SOBID = 'b'. APPEND ITAB.
LOOP AT ITAB.
AT NEW OBJID.
 if sy-tabix <> 1. append itab1. clear itab1. endif.
 itab1-txt = ITAB-OBJID.
ENDAT.
AT NEW SOBID.
 concatenate itab1-txt ITAB-DUMMY ITAB-SOBID into itab1-txt.
ENDAT.
ENDLOOP.
append itab1.
loop at itab1. write: / itab1-txt. endloop.
Regards, Dieter

Tow internal table to one commone internal table

hi
i have two internal table
itab1 having fields
f1
f2
f3
f4
and second internal table having fields
HERE F1 IS COMMON FIELD BETTWEEN TWO
f1
f5
f6
f7
f8
f9
f10
i want the data of both the internal table into one final table having data
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
IE COMBINED DATA OR BOTHE IE I AM ADDING THE COLUIMNS OF INTERNAL TABLE 1 AND INTERNAL TABLE 2 TO FINAL OUTPUT TABLE
PLEASE SUGGEST ?
REGARDS
ARORA

hi RAAM
the situation is like this
her is the internal table with data and rows
IT_APC                         Table[58x64]
it_dep                         Table[14x48]
it_Dep_Apc                     Table[1x108]
now iand combining data of itapc and itdep to it_dep_apc
both have only one common firled bukrs
and as rows and columns as displayed above
now if i do below as suggeted by u
LOOP AT IT_APC INTO WA_APC.
READ TABLE IT_DEP INTO WA_DEP WITH KEY BUKRS = WA_APC-BUKRS
BINARY SEARCH.
then the all the data is not combined i suppose as i need to have the final table all the data from both the internal tables....
ie common rows plus extra rows for bukrs
regards
Arora

How to join THREE different tables into internal table using one select statement .

How to join THREE different tables into internal table using one select statement .
Hi experts,
I would like to request your guidance in solving the problem of joining the data from three different database tables into one internal table
Scenario:
Database tables:
SPFLI
SFLIGHT
SBOOK.
Table Fields:
SPFLI - CARRID CONNID COUNTRYFR CITYFRM COUNTRYTO CITYTO
SFLIGHT - CARRID CONNID FLDATE SEATSMAX SEATSOCC SEATSMAX_C
SEATSOCC_C SEATSMAX_F SEATSOCC_F
SBOOK - CARRID CONNID CLASS
MY INTERNAL TABLE IS IT_XX.
Your help much appreciated.
Thanks in advance.
Pawan.

Hi Pawan,
please check below codes. hope it can help you.
TYPES: BEGIN OF ty_xx,
        carrid     TYPE spfli-carrid   ,
        connid     TYPE spfli-connid   ,
        countryfr TYPE spfli-countryfr,
        cityfrom   TYPE spfli-cityfrom ,
        countryto TYPE spfli-countryto,
        cityto     TYPE spfli-cityto   ,
        fldate     TYPE sflight-fldate ,
        seatsmax   TYPE sflight-seatsmax ,
        seatsocc   TYPE sflight-seatsocc ,
        seatsmax_b TYPE sflight-seatsmax_b,
        seatsocc_b TYPE sflight-seatsocc_b,
        seatsmax_f TYPE sflight-seatsmax_f,
        seatsocc_f TYPE sflight-seatsocc_f,
        class      TYPE sbook-class,
      END OF ty_xx,
      t_xx TYPE STANDARD TABLE OF ty_xx.
DATA: it_xx TYPE t_xx.
SELECT spfli~carrid
       spfli~connid
       spfli~countryfr
       spfli~cityfrom
       spfli~countryto
       spfli~cityto
       sflight~fldate
       sflight~seatsmax
       sflight~seatsocc
       sflight~seatsmax_b
       sflight~seatsocc_b
       sflight~seatsmax_f
       sflight~seatsocc_f
       sbook~class
INTO TABLE it_xx
FROM spfli INNER JOIN sflight
ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid
INNER JOIN sbook
ON spfli~carrid = sbook~carrid
AND spfli~connid = sbook~connid.
Thanks,
Yawa

How can i add two table into one internal table

I WANT TO ADD THIS TWO DIFFERENT TABLE INTO ONE INTERNAL TABLE PLEASE HELP.
TABLES: J_1IEXCHDR, J_1IEXCDTL.
SELECT * FROM J_1IEXCHDR WHERE STATUS = 'P'.
WRITE: / J_1IEXCHDR-LIFNR,
 J_1IEXCHDR-DOCNO,
 J_1IEXCHDR-EXYEAR,
 J_1IEXCHDR-BUDAT.
SELECT * FROM J_1IEXCDTL WHERE TRNTYP = J_1IEXCHDR-TRNTYP
 AND DOCYR = J_1IEXCHDR-DOCYR
 AND DOCNO = J_1IEXCHDR-DOCNO.
 WRITE: / J_1IEXCDTL-EXBAS,
 J_1IEXCDTL-EXBED,
 J_1IEXCDTL-RDOC1,
 J_1IEXCDTL-ECS.
ENDSELECT.
ENDSELECT.
THANKS IN ADVANCED.

U have to link these 2 tables like this
SELECT
J_1IEXCHDR~DOCNO
FROM J_1IEXCHDR inner join J_1IEXCDTL
on J_1IEXCHDRDOCYR = J_1IEXCDTLDOCYR
WHERE STATUS = 'P'.
this is sample code only, and u have to check the F.key relationship.
Regards
Prabhu

How to fill the data of two different tables into one?

Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PM

Hye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
 first type first_structure,
 second type second_structure,
 end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM

How to copy complete internal table into main dababase table

please tell me how to copy complete internal table into main dababase table by overwriting all the entries of the main DBtable.

HI,
you can use Insert Or Modify statement ..
Modify updates the existing record, insert creates a new one. ...
insert ZDBTAB from table itab.
Modify ZDBTAB from table Itab.
The structure of itab should be exactly the same as the z table.
You should not update standard tables directly though.
rewards if usefuyl
regards,
nazeer

Export multiple tables into one flat file

I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.

Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie

Download Internal Table into a Text File in BSP?

I have an internal table which i need to download into my local pc. I know i can not use FM gui_download. Could some one please post code on how to download the internal table into a text file in BSP. Also i am not sure if i can use save dialog FM. Also need suggestion on which FM to use for save dialog which tells where to save the file.
Any help will be appreciated.
Thanks
Nahman

This might be a good starting point.
<a href="/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table">/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table</a>

Collapsing two tables into one table or one queue

When you have data that exists in 2 tables A and B and B is essentially a child of A if you want to process these records such that you see all A's before their assoociated B how can you use either Streams or AQ to collapse these two tables into one? The data exists at it's source in database tables it will be replicated to another location and at that location I want to keep the data as it exists at the source but also process it in the ordered fashion I described above. My thinking is to publish the data to one queue but the challenge is to ensure that all A's are put on the queue before their B is. I don't just want a priority queue whereby all A's are processed before B's because if that happens B's will never be processed. but I simply want to avoid reading a B off the queue before I've read it's A.

No version number and no clarity of what you are trying to accomplish.
Without knowing that the problem is a nail ... I'd hardly be recommending using a hammer.

Xstring or internal table into archive

Hello,
is there a function module or something else, which can put a file from an xstring/internal table into the archive, to only ones i´ve found require the file to be on the application server or frontend pc
regards franz

Hello Franz,
did you find a solution regarding your problem?
I found a similar thread with a similar answer...: Storing XSTRING in ArchiveLink
Did you find a better solution?
Thanks in advance and BR, Christian

Error while downloading data from internal table into XML file

hi all,
i developed a program to download data from into internal table to xml file like this.
tables: mara.
parameters: p_matnr like mara-matnr.
data: begin of itab_mara occurs 0,
 matnr like mara-matnr,
 ernam like mara-ernam,
 aenam like mara-aenam,
 vpsta like mara-vpsta,
 end of itab_mara.
data: lv_field_seperator type c, " value 'X',
 lv_xml_doc_name(30) type c, " string value my xml file,
 lv_result type i.
 lv_field_seperator = 'x'.
 lv_xml_doc_name = 'my xml file'.
types: begin of truxs_xml_line,
 data(256) type x,
 end of truxs_xml_line.
types:truxs_xml_table type table of truxs_xml_line.
data:lv_tab_converted_data type truxs_xml_line,
 lt_tab_converted_data type truxs_xml_table.
data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
 rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
 I_FIELD_SEPERATOR = lv_field_seperator
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
 I_XML_DOC_NAME = lv_xml_doc_name
IMPORTING
 PE_BIN_FILESIZE = lv_result
TABLES
 I_TAB_SAP_DATA = itab_mara
CHANGING
 I_TAB_CONVERTED_DATA = lt_tab_converted_data
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
open dataset lv_xml_file for output in binary mode.
loop at lt_tab_converted_data into lv_tab_converted_data.
transfer lv_tab_converted_data to lv_xml_file.
endloop.
close dataset lv_xml_file.
this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
will anyone show me the possible solution to rectify this error
thanks and regards,
anil.

Hi,
Here is a small sample program to convert data in an internal table into XML format and display it.
DATA: itab TYPE TABLE OF spfli,
 l_xml TYPE REF TO cl_xml_document.
* Read data into a ITAB
SELECT * FROM spfli INTO TABLE itab.
* Create the XML Object
CREATE OBJECT l_xml.
* Convert data in ITAB to XML
CALL METHOD l_xml->create_with_data( name = 'Test1'
 dataobject = t_goal[] ).
* Display XML Document
CALL METHOD l_xml->display.
Here are some other sample SAP programs to handle XML in ABAP:
BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
Hope this helps,
Sumant.

How to download values in an internal table into an excel file

is there any fn module to download the values in an internal table into an excel file..

hi
the function module "GUI_DOWNLOAD" downloads the data from
an internal table into a file (can be xl, dat ,doc etc) .
Plz follow the usage below ;
Parameters : pa_pfile LIKE rlgrap-filename OBLIGATORY.
Data : lv_filename TYPE STRING.
lv_filename = pa_pfile.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE =
 FILENAME = lv_filename
 FILETYPE = 'ASC'
 APPEND = ' '
 WRITE_FIELD_SEPARATOR = 'X'
 HEADER = '00'
 TRUNC_TRAILING_BLANKS = ' '
 WRITE_LF = 'X'
 COL_SELECT = ' '
 COL_SELECT_MASK = ' '
 DAT_MODE = ' '
 CONFIRM_OVERWRITE = ' '
 NO_AUTH_CHECK = ' '
IMPORTING
 FILELENGTH =
 TABLES
 DATA_TAB = tb_download " table data to b downlaoded
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Pankaj

Mapping of various internal tables into one existing excel

Similar Messages

Maybe you are looking for