Mapping Problem while creating the DP through utils (dpcreate.bat)

I am exploring on the command line and utils to create build and deploy the project in jcaps 5.1.3.
Used dpcreate.bat (from the repository utils) to create the deployment profile and automapping the components.
In a particular scenario when i have two web service invocation in a single project,I have two SOAP webservice external system clients in the environment.
when i use the dpcreate util, the two web services are getting mapped into a single SOAP webservice external system client.
However, I want them to be getting mapped into two different SOAP webservice external system clients.
------------------------------------------------THE OUTPUT OF THE COMMAND LINE--------------------------------------------
C:\JCAPS\repository\util>dpcreate.bat Administrator STC "test1" "envTest1" "dpTe
st1" "test1/cmTest1"
URL: http://127.0.0.1:12000/RepositoryName
User Name: Administrator
Project Path: test1
Environment Path: envTest1
Deployment Name: dpTest1
CME List: test1/cmTest1
CME Exclude List: none
Mapping File Name: C:/JCAPS/repository/util/dpmapping.properties
Recreate DP if found: false
Trying to connect to http://127.0.0.1:12000/RepositoryName ...
Total time to load resource is : 8845
Connected to http://127.0.0.1:12000/RepositoryName
Deployment Profile dpTest1 has been created
Deployment Profile dpTest1 has been added to project named test1
Processing mappings for 4 deployables ...
Deployable name CMap1_BusinessProcess11 mapped to system IntegrationSvr1
Deployable name CMap1_BusinessProcess11_outq mapped to system SBJMSIQMgr1
Deployable name CMap1_BusinessProcess11_Web Service Application1 mapped to system
CLIENT1
Deployable name CMap1_BusinessProcess11_Web Service Application2 mapped to system
CLIENT1
Saving changes to workspace
Result:
Successful. Deployed: 4, Undeployed: 0
Disconnecting from http://127.0.0.1:12000/RepositoryName
Can someone please guide me how to map these into different clients ? Is there any property file which I can modify ?
Thanks in Advance
Sushant

You will have dpmapping.properties file which can tell you this. Again in dpcreate you need to have one more option "recreate" which can help re-creating the Deployment profile.
Change your dpcreate.bat adding the recreate option and try.

Similar Messages

Problem while Creating the LEAD through WEB UI

Hi,
I am trying to create Lead from WEB UI. But, it is asking Sales Rep., but I am not able to find that field in the WEB UI.
And In the Status field, I am able to See only 2 statuses, "Open" and "In Process". I am not able to see any other status like "Rejected By Sales" and "Closed".
Can you please let me know the reason for this. Do we need to do any configuration or Coding Related , to achieve this.
Thanks,
Sandeep

Hi,
You can enter partners (Sales Rep) in Lead in assignment block Parties involved , for additional status check your status profile attached to transaction lead, also check lowest and highest value in status profile.
Regards,
Dipesh.

Problem while creating the Partner Address in CRM

Hi,
   We are facing one problem while creating the new address for the Business Partner.
   When ever customer wants to change the address : we are following one process : where we are
   using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the
corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
contains the old address number.
Because of this , we are getting lots of complaints regarding this.
Can you please help on this ASAP.
Thanks & Regards
Pradeep.

Try BAPI_BUPA_ADDRESS_CHANGE for address change followed by BAPI_TRANSACTION_COMMIT . It works.

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Problem While creating the related entity DocFlowSet

Hi,
i am trying to create a Business Transaction and attach it to the another transaction.
I am creating the Transaction T1 using the factory methods and I am facing issues while creating the related entity DocFlowSet to attach T1 as a follow on document to T0.
i am using the model DocFlowSingle and passing the parameters like.
ObjKeyA GUID of T0
OBJTYPEA
OBJKEYB GUID of newly created transaction T1
OBJTYPEB
RELKING
RELATEDGUID: GUID of T1
RELATIONID GUID: creating a new 22 character GUID and then assigning it
But still I am not able to create the related entity. Can any one please help me in resolving this.
Thanks,
Ravi G

Resolved by self

Problem while creating the ARE1

Hi All,
As per the client requirement, have to generate the ARE1 for the export sales process,
In this process while creating the ARE1 (J1IA101) the BED, ECESS, SHECESS values are not displaying inthe screen, if i save without values also the Bond in not updating
*Note: I can able to see only the ECESS% in the ARE1 Screen
Process followed now:
Sales Order
Delivery
Invoice(JEX)
Excise Invoice(J1IIN)
Bond creation
ARE1 Creation
guys, could you plz help me out in the above issues and plz let me know if any other process isthere to create the ARE1
Otherwise plz confirm that is there any NOTE(PATCH) is require to update in SAP
THANKS & REGARDS
Rajasekhar

*ISSUE has been resolved. Found the solution from the Forum,,,, Thanks to all who provided the below
Solution as per the forum below:
Plz do few changes and then your ARE-1 and ARE -3 both will work fine. Also the Report bond summary for ARE-1 will get updated
Applied this note J_1I7_USEREXIT_DUTY_IN_EXPORT
In case of ARE 3 Changes for ARE-3
In fn module 'J_1IEX_DEFAULT_EXCISE_DUTY'
before the call fn given below this update has initial in it convert it to 'Y'
IF l_update_cond EQ 'Y'.
*} REPLACE
CALL FUNCTION 'J_1I6_DETERMINE_EXCISE_RATE'
EXPORTING
Go to SE 37
and input
FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
""Local interface:
*" IMPORTING
*" REFERENCE(YVBRK) TYPE VBRK
*" EXPORTING
*" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
*If you do not want the excise duty to be calculated for a particular
*transaction then you need to mark the flag supress_calculation as 'X'
*This flag when left blank will trigger calculation of ED during j1ii
*When it is marked, the ED copied from billing will be left as it is
*{ INSERT VDQK903541 1
SUPPRESS_CALCULATION = 'X'.
*} INSERT
ENDFUNCTION.
Thanks & Regards

Problem while creating the record in IT0080 from background

Dear All,
I have a requirement to Create the record for Maternity Leave in IT0080 from background, whenever applied from ESS.
Once the leave gets aaproved, while posting the documents from tcode PTARQ ( Program - RPTARQPOST), in the BADI PT_ABS_REQ, in method IF_EX_PT_ABS_REQ~POST_VIA_BLOP for the implementation, I am trying to submit the program in which the actual record is created in IT0080.
In this program through BDC i have created the BDC data and have used CALL transaction, as internally IT 2001 also needs to be updated, which gets calculated indirectly...
But when executed, it gives error of Employee cannot be locked... as the Document which is posted through PTARQ, have several locks... I tried to dequeue the same...
but cannot resolve the problem...
Secondly i tried to create the Job also... which would be executed after some time... but still its not getting updated...
Any help... will be highly appreciated...
Regards,
Heena

Hello s.s
I'm not understand exacly what is your problem?
Field can have both values at the same time(Time Stamp and User stamp) only if that field calculated
Maybe you told about two different fields?
User stamp field return username only it's standart functionality
Create stamp - return date/time combination
Remote key is avialable when you repository configured to work with some remote systems
All records from repository (LUT, taxonomy attributes ets.) you can map to corresponding Destination items
Regards
Kanstantsin

Problem While creating the proxies

Hello,
When I am trying to create the Proxy for my Inbound Message from TCode:SPROXY, after assigning the package in the next screen it is asking to enter the "Access Key". Even if I give the correct access key it is displaying a message Invalid Entry.
I could create reports,function module etc. without specifing the access key at all.
Is the access key which I am suppose to give while creating proxies are different from the normal developer access key.
Please help me in solving this problem.
Thanks and Regards,
G.S.Chary

Hi Udo,
My Package name starts with "Z" and once I selected it is asking fo Access Key. But while creating this pacakge it has never asked me and access key at all.
Regards,
Chary

Problems while creating the leave request via PTARQ

Hi All......
While trying to create leave request via PTARQ I am getting the following warning message
Document created with warning: HRTIM00BLPRETRO 009 Earliest recalculation for time evaluation exceeded
Please suggest what should be done.
Abhi........

It sounds like you are trying to post a leave request on a date that is too far in the past.
Check:
1. PA03, earliest retro acctg period. The leave requst cannot be older than that data.
2.. In IT0003 for the employee involved: Check Earl.pers RA date. Leave request cannot be older than that date.
If you want the leave request to be posted anyway, you either have to change the dates mentioned above (be careful, they are there for a reason).
Hope this helps
Kirsten

Problem while creating the Transport Request in BI Development.

Dear Friends,
We are trying to transport the objects from BW Development System to BW Production system. We are using the Path RSA1-> Modeling -> Transport Connection.
In Transport Connection i selected grouping "Only necessary objects" and later i selected the ODS object into right side panel (Transport Area), by default it showed as $TMP package, to change the Package into our own package we clicked on Package pushutton. It popup a screen "Select Objects for Changing Package" here we selected all and clicked on OK button and it asked for the new Package name where we specified our own package name (ZBIW) and clicked on save button and it got save after changing the package name we selected all the objects and clicked on the Transport pushbutton but it did not asked for a request id and we got the following message.
Error/Info Message:
Edit objects separately since they belong to different original systems.
Choose 'Display object' or 'Cancel'.
Please give us your valuable input for our issues.
Thanks in Advance.
Regards,
Akash.

Hi,
find the Objects for which the system is creating this error from the error messages.
And then search for those objecs in the collected objects ,in right hand side screeb of Transport connector. you can find them two times ticked.And then remove tick mark for one .So that. you are making tick mark for only one time for those objects.
with rgds,
Anil Kumar Sharma .P

Quantity problem while creating the sales order

Dear Experts,
Need your inputs for the following case,
the sales order has to accept only quantity 1, if more than 1 qty it has to show error message.
how to control this,as i know not through incompletion log.
Please let us know your valuable suggestions urgently.
Thanks
Raju

Hi
J Raju
Go to SPRO
Sales and Distribution- --- Sales Documents -- Sales Document Item - -- - Sales Document Item--Select yr sales doc item category view the same there u will find -- general control -- put tick on order qty=1
Hope this will help you.
Thx

Subject field while creating the change request

Hi All
I want to populate the subject field in the change request by default.

Hi
The automatic population of the subject field while creating the CR through folloup transaction from Support message.
Regards
Kumar

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT3275 How do I correct this problem - Time Machine could not complete back up. An error occurred while creating the backup folder? The problem started on 5th March but I had backed up to an iomega HD since I got my iMac in October.

I have had a problem since 5th March with Time Machine on my iMac. I have had no problem since I got the computer in October backing up to an iomega HD but now I keep getting a message that "Time Machine could not complete the backup. An error occurred while creating the backup folder". Anyone know how to correct this?

I had the same "Error creating the backup folder" error - many times over.
I went into the Disk Utility, selected the Backup Disk and ran Verify. It checked out OK. But if not, could have run Repair.
Then did a complete shutdown and restart of the iMac and then tried "Backup Now" from the Time Machine icon's menu - it worked fine.

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Mapping Problem while creating the DP through utils (dpcreate.bat)

Similar Messages

Maybe you are looking for