Mappings between table operator and joiner operator

HI all,
I am new to owb. I am trying to create a mapping in the OWB Mapping Editor where the scenario looks like :
table1 operator ---------> joiner file operator
i am looking at earlier mappings' sql code and found that there is a where clause condition that governing the above such scenario such as:
where table1.column value = "something" then load into joiner file operator.
But in the mapping editor, i cannot find any way to add this condition by clicking on the column name of table1. Please help.
thank you.

Hi
A joiner will make one output from 2 or more inputs. A joiner has a join condition which if you select the operator (not a group or an attribute with operator) the property inspector will have a join condition for detailing the 'where' clause.
If you want to filter a single input then use a filter operator. Again like condition the filter operator has a filter condition which if you select the operator (not a group or an attribute with operator) the property inspector will have a filter condition for detailing the 'where' clause.
Cheers
David

Similar Messages

  • Is there any Similar between Class.forName() and new operator ???

    Plz tel me is there any Similar between Class.forName() and new operator ??? i have been asked this ques in interview

    You probably should have used the other thread:
    http://forum.java.sun.com/thread.jspa?threadID=792678
    To add a little confusion to the matter...Class objects are in fact objects. They're objects representing classes. So, in a sense, I guess, you could say they're similar -- in each you get an object. But in practice Class objects and all other objects should be considered semantically different unless you're doing some pretty unusual stuff. Also Class.forName is more of a factory method than a constructor.

  • Diffrence between Class.forName() and new Operator

    What is diffrence between class.forName() and new operator.Please tell in much detail.
    Also about classloader.loadclass.
    Suppose the class that we are tring to load with the help of class.forname is not compiled. Again if I make changes at runtime to that class will that get reflected.

    What is diffrence between class.forName() and new
    operator.Please tell in much detail.Class.forName loads a class. The new operator creates a new instance. Apple trees and apples.
    Also about classloader.loadclass.Read the API.
    Suppose the class that we are tring to load with the
    help of class.forname is not compiled.Then you can't load it and get an exception. Read the API.
    Again if I
    make changes at runtime to that class will that get
    reflected.Depends on the changes and when exactly you do them.

  • Find the key for join between table "crhd" and "equi" for use field "answt"

    I make program for read data from table "crhd" for print  about machine report
    but I can not find the key for link join to table "equi" for print field "answt" (acquistion value)
    please help me  find the key field for join between table "crhd" and "equi" for use field "answt"
    thank you very much...

    This is how the Work Center is linked to a particular Equipment -
    Functional - In IE03 ( view Equipments) You see the Work Center of a particular Equipment.
    Technical - Go to view V_EQUI ( view of EQUI and EQUZ). Pass the Equipment number alongwith V_EQUI-PM_OBJTY = 'A' ( i,.e searching for the Object Type Work Center).  In this way u ll get the V_EQUI-GEWRK - this is the Work Center ID.
    You can pass this Work Center ID to CRHD. And you will get the Work Center text.
    CRHD-OBJTY = 'A'
    CRHD-OBJID = V_EQUI-GEWRK.
    and u ll get the CRHD-ARBPL - this is the Work Center.
    So u need to come backwards, alongwith ur CRHD-OBJTY and CRHD-OBJID , you pass the same to V_EQUI and u get the list of equipment numbers alongwith ur ANSWT(Acquisition value).
    I guess it solves ur problem.

  • 1.     Defining dependencies between Work order operations and Isolation Operation Steps

    Hi All
    Will you please let me know how i can define dependencies between Work order operations and
    Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
    Regards
    Makarand      

    Hi All
    Will you please let me know how i can define dependencies between Work order operations and
    Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
    Regards
    Makarand      

  • Difference between parallel sequence and parallel operation in a routing.

    Hi Experts,
    Can any one explain me with example the difference between parallel sequence and parallel operation in a routing? wHEN CAN WE USE PARALLEL OPEARTION AND PARALLEL SEQUNCE WITH COMPONENT ALLOCATION.
    Regards
    Deepak sharma

    I think u need to modify ur quest... i think u r asking about Parallel sequence and alternate seq. Below are the details from SAP site.
    A parallel sequence enables you to process several operations at the same time.
    You use an alternative sequence for example, if
    --The production flow is different for certain lot-size ranges
    For instance you can machine a work piece on conventional machine or on NC machines. A NC machine has a longer set-up time than a conventional machine. However the machining costs are considerably less. Therefore whether you use NC machines will depend on the lot size.
    ---The production flow changes under certain business conditions.
    For instance, if you have a capacity problem, you have some production steps performed externally by a vendor.

  • Routing number of operations and reference operation  in the order

    Hi experts,
    If anyone knows about Routing number of operations and reference operation  in Maintenance order , please explain.
    is it used for maintenance order? if yes, please mention the path from which I can see or note the number generated by the system as Routing number of operations or operation task list no. or reference operation
    Regards,

    Hello,
    Routing number of operations in the order"(field-->AUFPL) of the order at table AFKO, using order number. Find the Operation counter number of the operation at table AFVC using "Routing number of operations in the order".
    From above we can fetch the Operation Level data of Order by using the Routing number of operations in the order"(field>AUFPL)  .Routing number of operations in the order>which solely identity of the Operation for your order after creation of order it is created this number.
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Sep 23, 2010 2:47 PM

  • Operation and Sub operation link in routing -reg

    Hi,
    In one of our report development we have to seggregate the operation number wise suboperations
    which table and fields we have to use ?
    we have to down load all the operations and sub operations for a given routing from the system and should be able to display for this operation these  are all the sub operations and display their operation timings
    please guide
    regards,
    Madhu Kiran

    Hi,
    If i go to some operation and add one sub operation for it , i am not getting in the tables both operation and sub operation
    i think both are getting stored in the same field
    can some one give some logic of fields connection to fetch the sub operatiosn of an operation ?
    PLPH table has no entries at all in our system
    i try to use PLPO and PLAS
    i require basic logic of flow
    how to get the suboperations of an operation
    pl help
    regards,
    madhu kiran

  • Branch operation and return operation for routing in alternative sequence

    Hi all experts.
    I would like to ask which table and field store the value of branch operation and return operation for routing in the alternative sequence. I can only find them in structure (PLFLD-VORNR1 and PLFLD-VORNR2) but I want the table field of them. Would anyone please suggest a solution? Thank you.

    Hi,
    look in table AFFL, here the BKNT1 and BKNT2 refer to those vornr1 and vornr2 of the operation. For example in user-exit ZXCO1U01 you will find the values (BKNT1/2) in the sequence table, and when, for example, filling the LOIPRO01-Idoc, you can use the found VORNR for the E1AFFLL-segment.
    See coding for example on determining VORNR1/2 (sequence_table/operation_table as in user exit EXIT_SAPLCOBT_001):
    SORT operation_table BY vornr.
      LOOP AT sequence_table INTO l_sequence.
        MOVE-CORRESPONDING l_sequence TO l_affl.
    * Read the operation table to determine the vornr1 and vornr2
    *via the value of field BKNT1/2
        IF NOT l_sequence-bknt1 IS INITIAL.
          READ TABLE operation_table INTO l_operation
          WITH KEY aufpl = l_sequence-aufpl
                   aplzl = l_sequence-bknt1.
          IF sy-subrc = 0.
            l_affl-vornr1 = l_operation-vornr.
          ENDIF.
        ENDIF.
        IF NOT l_sequence-bknt2 IS INITIAL.
          READ TABLE operation_table INTO l_operation
          WITH KEY aufpl = l_sequence-aufpl
                   aplzl = l_sequence-bknt2.
          IF sy-subrc = 0.
            l_affl-vornr2 = l_operation-vornr.
          ENDIF.
        ENDIF.
    Cheers,
    S.

  • What is difference between table space and shchema

    what is difference between table space and shchema ?

    784633 wrote:
    so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
    The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
    Those objects will be physically stored in a tablespace.
    A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
    A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
    and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

  • Link between table BSEG and BSET

    Helo All.
    Can you please tell me what is the link between tables BSEG and BSET in FICO?
    Regards

    Hi
    Please check below thread Ramesh answerd for same query
    Relation between RSEG Table and BSET Table
    Thanks,
    Syf

  • The relation between table mbew and mbewh

    MORNING!
      I wanna know the relation between table mbew and mbewh.
      I finded some materials in table mbewh have total valuated stock , but these materials don't have value .
      Thanks a lot !

    Hi Roy, please check this link.
    http://www.sapfans.com/forums/viewtopic.php?p=4330&sid=a1b0e2c950bb90aa410b796d9ce0a13c
    REgards,
    Rich Heilman

  • Difference between table CKMLKEPH and transaction figure of CKM3

    Hi Gurus,
    Having an issue in material ledger transaction and table data.
    There is a difference between table CKMLKEPH and transaction figure of CKM3 for couple of periods.
    Single level price difference for raw material domestic figure coming in transaction CKM3 is not matching with CKMLKEPH table.
    Can you advice the tentative reason of it.
    Thanks in advance,
    MC.

    Hi MC,
    MLHELP_CCS_CONS_CHECK which check the actual CCS and the program
    MLHELP_SPRICE_CCS_INIT for the standard CCS.
    These programs are provided by the ML Helpdesk tool via note 364368.
    Although these reports are used by SAP Support you can execute them in
    test mode to verify your CCS data.
    Regards,Declan

  • Link between tables BBP_PDACC and BBP_DET_ACCOUNT

    Hi All,
    I am creating a shopping cart using function module BBP_PD_SC_CREATE. I can determine a GL account based on product category using table BBP_DET_ACCOUNT. But there are some other account assignment details which this function module requires and based on existing shopping carts that are created, I found that they are stored in table BBP_PDACC. Is there any linkage between tables BBP_PDACC and BBP_DET_ACCOUNT.
    Any help or guidance will be really appreciated.
    Thanks,
    Ameet

    Hi Ameet,
    Yeah you need to provide other account assignment if your business process do require? For example if you choose account assignment category as "Cost center" then standard account assignment category set up require Cost Center and GL account to pass in this function module. Account assignment configuration you can verify in SPRO in Cross application basic settings --> Account Assignment --> Define Account assignment category.
    BBP_PDACC as i mentioned earlier gets populated when you will create Shopping cart as it will store shopping cart account information.
    Hope this helps.
    thank you
    Ritesh

  • How to implement Union and Join operations in OBIEE

    Hi all,
    Am new to OBIEE. Can some one tell me the right place to create Union and Joins in OBIEE....
    Do i need to create Union or Join in Oracle(DB level) or do i have the option of creating Union/Join in Physical layer or BMM layer. I tried creating a union in Physical layer,but when i check the the data in presentation layer,i see only data from 1st table.
    Thanks you
    Praveen

    Union - in the physical layer when creating new physical table/table type select:
    Example:
    select 1 as id from dual union all
    select 2 as id from dual
    Joins - You create them in the physical layer (FK, complex) and in the BMM (complex).
    You don't need to create joins in the database.
    Regards
    Goran
    http://108obiee.blogspot.com

Maybe you are looking for