Mass Maintainance of Planning Version "000"

Folks,
Is there any standard functionality available in SCM 5.0 for mass Maintainance of Planning version "000" to material-locations combinations ? These Material-location combinations are created directly in SCM and are not CIFed from ECC.
Thanks in Advance !!
Regards
Pawan.

Hi Nitin,
Planning-Version-Dependent Location Product Data Plng Version--- appears as a selection criteria but not as an attribute to be maintained. Below is my exact requirements.
Lets say i have manually created products A, B, C...upto Z at location 123 directly in APO.
Now i want to assign these product-locations combinations to 000 Planning version.
In MASSD T-CODE i am not able to location Planning version as an attribute to be maintained ( i.e at bottom most of the screen).
I hope you got my requirements and the problem i am facing.
regards
Pawan.

Similar Messages

  • Diff: Version on workflow builder and Maintain Active Plan version on SWU3

    Group,
    Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
    Thanks in advance !
    Richard A

    Dear Richard Antony,
    The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
    Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
    Like wise there is lots of importance of versioning Workflow.
    The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
    Hope this will give you a clear picture.
    Regards,
    Chandrashekhar.

  • Copy actual data to plan version

    Dears,
    I have a requirement wherein business has maintained plan data for balance sheet GLs in GP12N for version 1 for 6 months. Now the requirement is to copy actual data of first 6 months to next 6 months in version 2 (forecast) and start comparing actual/plan/forecast. I tried copying in FAGLGP52N, but it allows only from plan version to another plan version.
    Please suggest if there is a way to copy actual data to plan version.
    I have another requirement to display plan version data of cost element (PL) which we maintain in KP06/7KE1 in F.01.
    Thanks,
    Lokesh

    Try to use Plan version (000) where the Actual values are posted in this version.
    Cheers,
    Sarhan.

  • /SAPAPO/OM17 Planning version 01PLV0000001~user only in LiveCache

    Hi,
    I am running SCM5.0 and while checking consitency of LiveCache and DB in /SAPAPO/OM17 I get error /SAPAPO/OM_SYNC002
    planning version in LiveCache only.
    How could I fix this problem? What does it mean?
    In SAP there is only planning version 000 known.
    Thank you.
    Best regards
    Christian

    Hi,
    my sap message I opened additionally was answered!
    Planning versions like 01PLV0000001~user are generated test data (from transaction /SAPAPO/OM17) which does not exist in database. These versions can be corrected, no productive data will bedeleted.
    Best regads
    Christian

  • We need to copy planning..etc from simulation version 002 to version 000,

    Hi experts,
    Our simulation Version is 002 and Active Version is 000
    We need to copy planning..etc  from version 002 to version 000, how to do. Explain me  elaborate
    Regards,
    moon

    Hi Moon,
                   There are two things in Copy Version Management.
    1) Copy the master and transaction data from active to simulation version.
    Transaction - /SAPAPO/VERCOP in this you can not copy from Simulation to Active.
    2) Merge the Planning Versions.
    Transaction - /SAPAPO/VERMER in which you can copy the planning area keyfigures from simulation version to Active Version.
    Regards,
    Saurabh

  • Options to maintain persons in active plan version from a current plan vers

    Hi,
    We have two plan  version currently in use. Plan version 01 in the current status and plan version ZZ in the active status. Few employees are still with the current plan version and are active in the system.
    Can anyone guide me how  to maintain the Persons that are still with Plan Version 01 and active in the system ?
    Because we need to somehow maintain them also with ZZ otherwise our Ugraded  system wil not show all reports correctly...This would be considered as Masterdata correction....
    I mean how to move the persons from the plan version 01 to active plan version ZZ and how there relationships will be maintained.
    Edited by: deepti saxena on Sep 19, 2008 8:49 AM

    Hi sikindar,
        Thanks for the quick reply. I executed transacn PP01 . I entered the emp id . but when i select the infotype relationship and try to maintain or dispaly it; it takes me to either PA20 or PA30 screen.
    Please guide me how to change the plan version of the employees.
    Thanks
    deepti

  • Stock on hand in SIM planning version

    Hi All,
    Is there a way the stock copied from the active version 000 to the SIM planning versnon to be updated without running report /SAPAPO/VERSION_COPY_TRANS, but manually? The problem is that if I update the stock with the report the planning version is de-initialized.
    Regards
    Alper

    I am afraid there is no easy way to do mass creation of stock. We have a similar situation where we need to create stock en masse for location products not defined in R3. The way we do it is using an excel file as input load that we make it read through standard function modules and create stock in Live Cache using /SAPAPO/OM_STOCK_CHANGE.
    Some other function modules that we use
    FILE_GET_NAME
    /SAPAPO/DM_VRSIOEX_GET_VRSIOID
    /SAPAPO/DATE_CONVERT_TIMESTAMP
    /SAPAPO/OM_STOCK_CHANGE
    /SAPAPO/DM_PEGID_GET_MATERIAL
    Make sure that when you load, use appropriate UoM conversions.

  • Initialize Planning Version Query

    Hi,
    We have an active version 000 for a planning area. Now, we have extra one simulation version which has been created for this. For business reasons, we need to copy the data from 000 to simulation version. Version copy is done successfully, and during this phase, I see this version having been there for the planning area.
    Now, immediately after the version copy is done, I have initialized the simulation version-ed planning area. And here, the system has thrown the ABAP run-time error with MESSAGE_TYPE_X, and I no more see the simulation version in the created time series objects.
    These two steps are happening as part of a chain.
    When I re-initialize the PA with my simulation version manually, the step goes fine........ I believe. I cannot do this for some reasons. But why is that so that the initialize PA step as part of the chain is not working. Is there any wrong in the sequence of steps maintained by me?
    Because, in Version copy step, first, the entire data is deleted, and I also see the message saying version <name> is deleted, and then the copying is happening. May be I require some expert light here.
    Thanks and Regards,
    Gurucharan.

    Actually, I am initializing two versions on the same planning area at the same time which is not possible.

  • Tcode KEFC and message:"Plan version is not supported"

    Hello all,
    Please is someone aware of solution for this situation:
    - I upload with tcode KEFC forecast datas from excel file in CO-PA
    - receiver records are created with errors
    - when I check for the errors system tells me that "Plan version is not supported, diagnosis : Plan version "0" has not been created in operating concern "1000", Procedure: Transfer version "0" to operating concern "1000" and maintain the attrributes for that version"
    - my concern is that when I check in customizing Planning, Initial Step: display view settings in operating concern details the version "0" is existingin the operati,ng concern "1000"
    So do you have a solution for this issue?
    Thanks and best regards
    JCO

    Hi Sudhakar,
    Thanks for answer but version "0" is tickled for Plan Actual, WIP and variance and I don't understand what to do about KEPM.
    Best regards
    JCO

  • Mass creation of planned order

    Hello,
    is there a way to mass creat a planned order for a finished product? having same FG mat, plant and prod version.
    Thanks

    Dear
    1.Goto MD61 with User parameters like Plant , Requirement type , Version and Planning Date .Then Select the Material Radio Buttion with FG item code .
    2.Enter the FG qty as required in each month as demand
    3.GotO MD02-Single Item ,Multi Level with indicator : NETCH , 2,1,3,3,2   and Execute the MRP to create the Planned order  for FG
    4.Check the result in MD04
    There is no SAP Standard Traction to Mass creation of  Planned Order .That is possible in Demand Creation and MRP run .
    Regards
    JH

  • "no active plan version exists" while adding system in partner profile

    Hi,
    i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
    Can anyone answer me how to do the set active plan version. I asked my functional team and  they didnt know how to set it.
    Thanks,
    Gowthaman.

    Thanks Sonia,
    in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
    Now i am getting different error while creating partner profile in we20..
    *Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
        *Message no. E0624*
    *Diagnosis*
        *Object CENTRALADMIN of type US is not known in the system.*
    *Procedure*
        *Enter a valid object and check the type.*
        *Make sure upper case and lower case are used correctly.*

  • How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

    Hi,
    I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
    How to retrieve Planned Cost that based on the Cost Plan Version ?
    Appreciate helps. Thanks.
    Regards,
    See Mun

    Plan versions:   A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
    Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
    Plan version 1 is used for the planning...
    How to see the  same in CJE5 is suggested by Virendra..
    However there is no filed name planned cost  in report but the name of the filed is Proj.cost sched.000
    with which you can achieve your result.
    path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the  right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
    similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
    Regards
    Nitin
    Edited by: Nitin  Patoliya on Jan 17, 2009 11:18 AM

  • How to activate planning version

    hi,
    sap gurus,
    in which t.code we will create planing version for product allocation.
    please explain how to activate planning version in product allocation.  when we go T.CODE MC93
    there the planning version 'A00' showing active instead of '000' which works as a updation when ever requried.
    regards

    Dear,
    A00 is active version
    What we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
    Creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
    Logistics u2192 Production u2192 SOP u2192 Planning u2192 Version Managementu2192 MC78 Copy
    So here in the Source Version Provide the SOP version that you have created,
    In the Target Version give Version A00
    Hope clear to you.
    Regards,
    R.Brahmankar

  • SAP - Cost Center Planning - Version 1

    Dear All
    Recently we have started to use the cost center planning through KP16 under plan version -1
    However we are unable to down the plan data in excel with a cost center break up through KSBP report.
    We are not using any special ledger
    System is showing the following error
    No plan cost line items recorded.
    Message no. KB419
    Diagnosis
    No planned costs line items are written to controlling area DXES in version 1 of fiscal year 2009.
    System Response
    The report cannot be executed.
    Procedure
    Check your selection criteria or activate the line item update function.
    Note
    The line item update function is controlled depending on the application:
    Cost center planning
    Here you can define the update for each version and fiscal year. You can maintain the corresponding indicator (integrated planning) in the version maintenance (settings for the fiscal year).
    This indicator you can either
    set manually when creating a version or
    set later via the menu sequence "Planning -> Planning aids -> Integration active".
    Regards
    Anilkumar

    Hi,
    The impact is that the planning is stored also as line items and the planning is integrated between the CO-PCA components. In SAP words:
    - All available plan records for controlling area/version/fiscal year are posted as line items. The R/3 System posts these line items to the AC interface.
    - Any existing line items in the plan allocation transactions (plan assesment, distribution, or accrual calculation) are posted to the AC interface as well and made available to other components.
    Regards,
    Eli

  • KP98 - Actual Prices do Not copy to plan version

    Hi everyone,
    I'm attempting to do a KP98, so that I can have a copy of  my actuals in my plan version. The transaction works fine in copying everything I selected, however when I check my activity prices using for example Tcode KSBT, it does not show me me any prices for my activities.
    In other words my activity quantities are successfully copied into my plan version, but NOT the prices.
    In version '000' prices exist, but not in my plan versio '100'. Any ideas?
    Am I missing something?
    Thanks.
    Edited by: Ehab Mansour on Jun 23, 2009 10:22 AM

    Hi Ramesh,
    So if I understand you correctly:
    Even after setting the "Price" and "Activity Qty" flag in KP98, it doesn't actually copy the price from version 000 to my plan version 100. I still have to run KSPI to get my price posted in my version 100?
    If that's what I understand correctly............... then what's the benefit of setting the "Price" flag in KP98? That's what I'm trying to understand.
    Of course if I change my planned values then I have to run KSPI again to calculate the new price.
    But if I just do a KP98, WITHOUT making any changes to my planning in version 100, should KP98 just copy the prices from my actuals, and I would only need to run KSPI again only if I make changes to my planning dollars?

Maybe you are looking for