MAPVIEWER-00011: Error creating a map data source
Getting the above error when trying to create a data source connection.
Any ideas?
I am able to create the JDBC data source on weblogic console but not on Mapviewer console..
thanks
The section of mapViewerConfig.xml is as follows :-
<MapperConfig>
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="orcl45"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="wWsfjzUi+dD2kWQP+PZJHMI7Y0pIey6q"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="false"/>
</MapperConfig>
Similar Messages
-
Data source cannot be created : MAPVIEWER-00011: Error creating a map data
Hi everyone,
i am getting an error meaasge while creating datasource
" Data source cannot be created : MAPVIEWER-00011: Error creating a map data source."
pls helpYou should assign only one value to jdbc_sid. Try with this
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="false"
/>
Make sure that oracle sid is 'ORCL'
Sujnan -
Error creating a new Data Source for Oracle connection
I'm trying to create a new data source connection to our
Oracle 10gR2 server using ColdFusion Administrator 6.1 Standard on
a Windows 2003 server.
I created a System DSN ODBC connection for Oracle. I can use
the ODBC connection when connecting an Access db to Oracle but when
I try to use it w/ ColdFusion Admin it generates the following
error message:
Connection verification failed for data source: sitest2
[]java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
Any help or recommendations would be greatly appreciated.
TinaThe schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM -
Error While Creating The Generic Data Source.
Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santoshn Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM -
Error when creating a new Data Source
All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
RThe schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM -
Getting Dump while Mapping data source.
Hi Expert,
Am getting below DUMP while trying to map data source in SEGW transaction.
Could you please suggest what could be possible cause for this?
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time 28.07.2014 18:30:59
Short Text
Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005 ", in line 14 of program
"CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ", the following syntax errors
have occurred:
Thanks & Regards,
GirdhariThanks Jasmin for the reply.
Yes.. Am following the E2E guide.
I tried by opening another external window by executing ok-code osegw but still getting same dump.
Below is the complete dump info.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_SADL_GW_UI_ALV_SADL_MAPPINGCP
Application Component BC-ESI-ESF-GW
Date and Time 29.07.2014 15:44:03
|Short Text |
| Syntax error in program "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ". |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "CL_SADL_GW_UI_PLUG============CP" had to be |
| terminated because it has |
| come across a statement that unfortunately cannot be executed. |
| In include "CL_SADL_GW_UI_ALV_SADL_MAPPINGCM005 ", in line 14 of program |
| "CL_SADL_GW_UI_ALV_SADL_MAPPINGCP ", the following syntax errors |
| have occurred: |
| "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB |
| LE_LAYOUT". |
| |
| |
| |
| Author and last person to change the include are: |
| Author SAP |
| Last changed by "SAP " |
|Error analysis |
| The following syntax error has occurred in program |
| CL_SADL_GW_UI_ALV_SADL_MAPPINGCP : |
| "CS_TABLE_LAYOUT" is not type-compatible with formal parameter "CS_TAB |
| LE_LAYOUT". |
| |
| " " |
|Trigger Location of Runtime Error |
| Program CL_SADL_GW_UI_PLUG============CP |
| Include CL_SADL_GW_UI_PLUG============CM002 |
| Row 11 |
| Module Type (METHOD) |
| Module Name /IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW |
|Source Code Extract |
|Line |SourceCde |
| 1| METHOD /iwbep/if_sbui_plugin~create_view. |
| 2| CASE iv_name. |
| 3| WHEN if_sadl_gw_ui_c=>gc_dialog-mapping_container. " custom container for the ALV Grid|
| 4| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_map_ds_sadl_c |
| 5| EXPORTING |
| 6| io_controller = io_controller |
| 7| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 8| iv_name = iv_name. |
| 9| |
| 10| WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_prop_map_alv_grid. " ALV GRID mapping table|
|>>>>>| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_sadl_mapping |
| 12| EXPORTING |
| 13| io_controller = io_controller |
| 14| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 15| iv_name = iv_name. |
| 16| |
| 17| WHEN if_sadl_gw_ui_c=>gc_dialog-entity_set_assoc_map_alv_grid. " ALV GRID mapping tabl|
| 18| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_alv_map_assoc |
| 19| EXPORTING |
| 20| io_controller = io_controller |
| 21| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 22| iv_name = iv_name. |
| 23| |
| 24| WHEN if_sadl_gw_ui_c=>gc_dialog-data_source_tree. " SADL entity ALV tree |
| 25| CREATE OBJECT ro_view TYPE cl_sadl_gw_ui_tree_ds_sadl_c |
| 26| EXPORTING |
| 27| io_controller = io_controller |
| 28| iv_plugin = if_sadl_gw_ui_c=>gc_ui_plugin |
| 29| iv_name = iv_name. |
| 30| ENDCASE. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 23 METHOD CL_SADL_GW_UI_PLUG============CP CL_SADL_GW_UI_PLUG============CM002 11 |
| CL_SADL_GW_UI_PLUG=>/IWBEP/IF_SBUI_PLUGIN~CREATE_VIEW |
| 22 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00E 7 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW |
| 21 METHOD /IWBEP/CL_SBUI_VIEW_COMPOSITE=CP /IWBEP/CL_SBUI_VIEW_COMPOSITE=CM004 6 |
| /IWBEP/CL_SBUI_VIEW_COMPOSITE=>CREATE_COMPONENT_VIEW |
| 20 METHOD CL_SADL_GW_UI_MAP_DS_SADL_C===CP CL_SADL_GW_UI_MAP_DS_SADL_C===CM00B 2 |
| CL_SADL_GW_UI_MAP_DS_SADL_C=>_ADD_COMPONENT_VIEW |
| 19 METHOD CL_SADL_GW_UI_MAP_DS_SADL_C===CP CL_SADL_GW_UI_MAP_DS_SADL_C===CM008 11 |
| CL_SADL_GW_UI_MAP_DS_SADL_C=>DO_SETUP_INSTANCE |
| 18 METHOD /IWBEP/CL_SBUI_VIEW===========CP /IWBEP/CL_SBUI_VIEW===========CM003 58 |
| /IWBEP/CL_SBUI_VIEW=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND |
| 17 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00E 12 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_COMPONENT_VIEW |
| 16 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00I 17 |
| /IWBEP/CL_SBUI_SETUP=>CREATE_FRAMESET_EDITOR |
| 15 METHOD /IWBEP/CL_SBUI_SETUP==========CP /IWBEP/CL_SBUI_SETUP==========CM00G 59 |
| /IWBEP/CL_SBUI_SETUP=>/IWBEP/IF_SBUI_SETUP_FACTORY~CREATE_ELEMENT_EDITOR |
| 14 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM015 22 |
| /IWBEP/CL_SBUI_CONTROLLER=>GET_ASSIGNED_EDIT_TOOL |
| 13 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00A 33 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_NAVIGATION_REQUESTED |
| 12 METHOD /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CP /IWBEP/CL_SBUI_DP_CMD_CREA_MA=CM001 53 |
| /IWBEP/CL_SBUI_DP_CMD_CREA_MA=>DO_EXECUTE_COMMAND |
| 11 METHOD /IWBEP/CL_SBUI_COMMAND========CP /IWBEP/CL_SBUI_COMMAND========CM002 4 |
| /IWBEP/CL_SBUI_COMMAND=>/IWBEP/IF_SBUI_COMMAND_HANDLER~EXECUTE_COMMAND |
| 10 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00E 9 |
| /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND_OF_PLUGIN |
| 9 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00Y 97 |
| /IWBEP/CL_SBUI_CONTROLLER=>HANDLE_COMMAND |
| 8 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00C 138 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_CONTROLLER~ON_COMMAND_REQUESTED |
| 7 METHOD /IWBEP/CL_SBUI_SCREEN=========CP /IWBEP/CL_SBUI_SCREEN=========CM001 18 |
| /IWBEP/CL_SBUI_SCREEN=>ON_PAI_COMMAND |
| 6 MODULE (PAI) /IWBEP/SAPLFG_SBUI_SB_MAIN /IWBEP/LFG_SBUI_SB_MAINI01 14 |
| PAI_0100_COMMAND |
| 5 METHOD /IWBEP/SAPLFG_SBUI_SB_MAIN /IWBEP/LFG_SBUI_SB_MAINCI1 34 |
| LCL_SCREEN_0100=>DO_CALL_SCREEN |
| 4 METHOD /IWBEP/CL_SBUI_SCREEN=========CP /IWBEP/CL_SBUI_SCREEN=========CM003 17 |
| /IWBEP/CL_SBUI_SCREEN=>START_SCREEN |
| 3 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM00U 50 |
| /IWBEP/CL_SBUI_CONTROLLER=>START_SCREEN |
| 2 METHOD /IWBEP/CL_SBUI_CONTROLLER=====CP /IWBEP/CL_SBUI_CONTROLLER=====CM004 33 |
| /IWBEP/CL_SBUI_CONTROLLER=>/IWBEP/IF_SBUI_SERVICE_BUILDER~START |
| 1 EVENT /IWBEP/R_SBUI_SERVICE_BUILDER /IWBEP/R_SBUI_SERVICE_BUILDER 19 |
| START-OF-SELECTION |
Thanks,
Girdhari -
Problem connecting Mapview to Oracle Database(Add a data source)
Im a neophyte to the mapviewer and Ive run into a very primitive problem. I cant view the sample maps in the mapviewer. I cant connect to the database where I've loaded the sample oracle data (mvdemo.zip) to the database. I have the mapviewer running. Ive checked my tnsnames to confirm the connection used by other oracle application (sql) and confirmed that the spatial files exists on the database.
Below is my platform inform
Platform
For MapView
We have Java- j2se_1.4.2_09
My local system is Microsoft Windows 2000.
Connect to Oracle 9.2.0.4.0 and 10.1.0.3.1 on separate machines
Here is my connection infor:
<?xml version="1.0" standalone="yes"?>
<non_map_request>
<add_data_source
name="mvdemo"
jdbc_host="medea"
jdbc_port="1521"
jdbc_sid="orcl"
jdbc_user="gda_stock"
jdbc_password="!********"
jdbc_mode="thin"
number_of_mappers="3" />
</non_map_request>
Here is the error I received:
<?xml version="1.0" encoding="UTF-8" ?>
<oms_error>Message:[MapperConfig] cannot add map data source. Fri Aug 26 17:28:04 CDT 2005 Severity: 0 Description: at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:583) at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:315) at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241) at oracle.lbs.mapserver.oms.doPost(oms.java:409) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Unknown Source)</oms_error>Hi, is there anyone here who can help me.....thanks in advance!
-
An error occurred accessing a data source.
Hi,
I have seen many posts talking about this error but still i am facing the same issue. The process i have followed is:
1) created infopath form with receive data connection to SQL DB with plain username/pwd
2) placed the repaeating table of receive dataconnection, form has full trust
3) converted the dataconnection to udcx and stored it in data connection library of site collection
4) published the form for admin approval, and as i am the admin i have uploaded it and activated it
5) approved the dataconnection
6) i have modified the infoath settings to use SQL authen, data connection files , cross domain
But still i am getting this error:
An error occurred accessing a data source.
An entry has been added to the Windows event log of the server.
Log ID:6932
Regards,
Amarnath.
Regards, Amar.hi,
I have found below log:
DataAdapterException, Exception Message: The database returns an error. Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.)
but i am receiving data only here is my query:
SELECT [Service Request],[Task Order],COUNT(*) as TotalTestCases,SUM(CASE WHEN [Status] = 'Completed' THEN 1 ELSE 0 END) AS Completed,
SUM(CASE WHEN [Status] = 'Blocked' THEN 1 ELSE 0 END) AS Blocked,SUM(CASE WHEN [Status] not in('Completed','Blocked') THEN 1 ELSE 0 END) AS InProgress FROM
DashBoardView where SRStatus = 'Active' group by [Service Request],[Task Order]
is my calculated columns is giving error? but when i run my wuery its giving correct output
Regards, Amar. -
Error occurred querying a data source in office 365.
I have created a simple infopath form and in one of my dropdown box i am receiving the REST services.
when i run the infopath form 2013 in preview it was running good but when i upload it on to office 365 cloud it's showing me error. i had converted the services into UDL and save it on Data connection Library and it's approved.
Warning
Click OK to resume filling out the form. You may want to check your form data for errors.
The entry has been added to the Windows event log of the server.
log ID:5566
Correlation ID:feb08a9c-9d47-30f5-5d89-60340242d6d1.Hi,
According to your post, my understanding is that you got error when querying a data source in office 365.
Per my knowleadge, we cannot connect to SharePoint Web Services from InfoPath Forms within SharePoint Online.
Loopback protection is enabled on the SharePoint Online environment and will block calls to SOAP and REST from InfoPath Form Services.
For more information, you can refer to:
Error message when you connect an InfoPath form to a SharePoint Online web service: "An error occurred while connecting to a Web Service"
As a workaround, to look up data for some dropdowns from several external REST Web Services, we need to have a Data Connection library in your Site Collection in which to store the UDCX files.
The steps seem to be:
Create a Data Connection Library in your Site Collection
In the InfoPath ribbon, go to Data, then Data Connections. Your existing data connections should be listed.
Choose the data connection which is hosted on a different domain.
Clink the
Convert to Connection File… button
In the location selector, specify the path to the Data Connection Library you created above.
Leave the
Relative to site collection (recommended) radio button selected.
Click OK
Here is a great blog for your reference:
InfoPath 2013 Forms on Office365 with External REST DataSources
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error while Replicating the Data Source in Quality System....
Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
SanjanaHi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana -
I have an infopath form that is getting the error when opening an existing form or creating a new form:-
Warning
An error occurred querying a data source.
Click OK to resume filling out the form. You may want to check your form data for errors.
Hide error details
An error occurred while trying to connect to a Web service.
Correlation ID:7ab6be2c-60e1-4025-be1e-1a2fbe00acd3
So I know its a permission issue because full control users have no problem. I have found a suggestion here suggesting making sure the group has "Who can View Membership to the Group" but that didn't work for me - and
my test user is only a member of one group -
http://sharepoint.stackexchange.com/questions/109488/usergroup-asmx-returns-unauthorized-for-some-groups
How can I get around this without provding users Full Control?So I fixed this with exactly what I mentioned above by adding "everyone" "Who can View Membership to the Group" permission. My error initially was that I was looking at the incorrect security group.
-
Error in codepage mapping for source system
Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep SharmaHi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa. -
Error in codepage mapping for source system. Error
Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards. -
Error in codepage mapping for source system. Error text:
guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AMHi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit -
ERROR WHEN GENERATING EXPORT DATA SOURCE
Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish
Maybe you are looking for
-
Use of "Open FPGA VI Reference" function --- Build Specification vs VI vs Bitfile
When using the "Open FPGA VI Reference" function in a LV2012 cRIO application, there are 3 options: Build Specification, VI, or Bitfile. What would be the reasons for selecting one over the others? Does it affect the resulting startup.rtexe when the
-
Open document from network drive in an iView
Hello, is there a possibility to open a document which is on a network drive in an iView? Which steps must I do to get such an iView? Please help me! Regards Philipp
-
HT4314 How do you open game center games?
I know I must be overlooking something. I cannot open my games in the game center. I click on the game and it asks if I want to share or challenge someone. I just want to play my games. Also, I copied my apps/games from my ipad and iphone onto my n
-
JFrame with java version '1.4.1_01'
I use java version 1.4.1_01-b01. When my class extends a JFrame, it give me a warning : Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct although it works fine, but I don't feel good with a
-
Licensing error in Windows 2000
Post Author: DaveMoran CA Forum: Upgrading and Licensing I'm using the RDC component in Crystal XI with SP3 to build a custom application. This application is written in C++ and built using VS2005. I've recently upgraded VS2005 with SP1. I've been in