Mark for Translation - checkbox?

Can anyone clarify how to use - Mark for Translation - check box below the Display Name.
Should we select the check box to be available for translation.
Thanks!

Hello Kumar,
You need to check this check box in case you want to convert the display name into the language you would select for the instance.
Lets say in futture if you are changing the language for a particular use, at that time if this is checked then only display name will be converted.
I hope it helps!!
Mayank

Similar Messages

'Mark for Translation' cannot be used in languages other then the primary

Hi there,
I'm using webservices to update a picklist and when i try to insert a new value im getting the following error message:
'Mark for Translation' cannot be used in languages other then the primary.(SBL-ODS-50196).
Can anyone give me an help on this?
thanks.
This is my SOAP request:
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<PicklistWS_UpdatePicklist_Input xmlns="urn:crmondemand/ws/picklist/">
<FieldName>IndexedPick5</FieldName>
<ns1:ListOfPicklistValues xmlns:ns1="urn:/crmondemand/xml/picklist">
<ns1:PicklistValues>
<ns1:Code>TESTE</ns1:Code>
<ns1:DisplayValue>TESTE</ns1:DisplayValue>
<ns1:Order>2</ns1:Order>
<ns1:Disabled>N</ns1:Disabled>
</ns1:PicklistValues>
</ns1:ListOfPicklistValues>
<RecordType>Account</RecordType>
<LanguageCode>PTG</LanguageCode>
<CreateNew>Y</CreateNew>
</PicklistWS_UpdatePicklist_Input>
</soapenv:Body>
</soapenv:Envelope>

you are not in correct forum - pls raise this in Oracle On demand forum

Importance of mark for translation check box

Hi:
While translating the fields to another language with or without marking the check box "Mark for Translation" the fields are translated...Could anyone give the importance of this check box??
Thanks in Advance,
Ashan.

Hi, It only provides a facility to keep track of fields that you like to translate manually. When you choose Mark for translation and change the translation language in field management page, you can see all the marked for translation fields in blue color.The blue color goes off the moment you modify the display name in another language and save the record.
-- Venky CRMIT

[svn:fx-4.x] 14772: The check mark in the CheckBox components should never be mirrored, even if the label in the CheckBox is mirrored.

Revision: 14772
Revision: 14772
Author:   [email protected]
Date:     2010-03-16 07:14:46 -0700 (Tue, 16 Mar 2010)
Log Message:
The check mark in the CheckBox components should never be mirrored, even if the label in the CheckBox is mirrored.
QE notes:
Doc notes: None
Bugs: SDK-25817
Reviewed By: Kevin, Jason
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25817
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/spark/src/spark/skins/spark/CheckBoxSkin.mxml
    flex/sdk/branches/4.x/frameworks/projects/sparkskins/src/mx/skins/spark/CheckBoxSkin.mxml

What are you supposed to cast it to? I might have tried to cast it to something wrong.
I tried
TableCellRenderer tcr = table.getDefaultRenderer(Boolean.class);
((DefaultTableCellRenderer)tcr).setHorizontalAlignment(SwingConstants.LEFT);and that gave me a ClassCastException. But I might have been trying to cast it to the wrong thing.

Photoshop CC - supplied Jpeg at 6.5"Hx9.5"w. Need to add trim marks for printer at 6"x9". How?

I have a jpeg which is 6.5" high x 9.5" wide. I need to insert trim marks at 6" x 9" leaving a .125" bleed. I am new to Photoshop but not a complete idiot. I've watched countless videos but don't see how to do this with art already done by someone else.
Is there anyone who can guide me?

Both seem appropriate. The issue is, the person creating the original art knew less of the software than I. And I just started.
The original art she provided is 9.5"wide x 6.5"high. She increased the surface area to allow for .125 bleeds and excess but the image went all the way to the edge of the canvas. I was simply trying to add trims marks for the purpose of cutting in the proper position.
This was for internal printing on a digital press. Because I would be the only person handling the materials from start to finish (including cutting) I wasn't worried about having to translate the layout on the press sheet.
I ended up deleting all of the text and stripping the art down to the bare image which I saved and rebuilt the entire art file from scratch, properly with layers and the correct page size. Which worked out great, because the client made changes that I would otherwise been unable to do.
Thank you all for the information. I'm still a little confused on how to simply add crop marks to someone else' artwork, but I have enough information to figure it out now.

Setting check mark for SelectManyCheckbox item

I'm trying to set the check mark for a SelectManyCheckbox item from a backing bean and cannot find any explicit explanation or example to do this. This would be used to have a command button select all checkboxes and a command button to clear all checkboxes.
I've been trying to set the SelectItem value, but while log messages suggest what is desired has occurred, nothing visually changes. Here's the key parts of what I'm working with so far.
<h:selectManyCheckbox
id="patients" layout="pageDirection"
value="#{SelectBean.patientsSelected}" >
<f:selectItems value="#{SelectBean.patientSelects}" />
</h:selectManyCheckbox>
<h:commandButton type="submit" value="Select All Patients"
id="allPatients"
action="update"
actionListener="#{SelectBean.onSelectAll}" />
private Collection<SelectItem> patientSelects;
private List<String> patientsSelected;
for (int i = 0; i < 10; i++) {
value = false;
label = locationSelected + "-" + "patient" + Integer.toString(i);
patientSelects.add(new SelectItem(value, label));
public void onSelectAll(ActionEvent event) {
for (Iterator it = patientSelects.iterator(); it.hasNext();) {
    SelectItem si = (SelectItem) it.next();
      si.setValue(true);
}

the arrayList you suggest doesn't even contain these items.You have to prefill the patientsSelected yourself to mark preselected items.
Basic example:<h:selectManyCheckbox value="#{myBean.selectedItems}" />
    <f:selectItems value="#{myBean.selectItems}" />
</h:selectManyCheckbox>MyBeanprivate List<String> selectedItems; // + getter + setter
private List<SelectItem> selectItems; // + getter + setter
    // Prefill selectItems.
    selectItems = new ArrayList<SelectItem>();
    selectItems.add(new SelectItem("value1", "label1"));
    selectItems.add(new SelectItem("value2", "label2"));
    selectItems.add(new SelectItem("value3", "label3"));
    selectItems.add(new SelectItem("value4", "label4"));
    selectItems.add(new SelectItem("value5", "label5"));
    // Preselect item #2 and #4.
    selectedItems = new ArrayList<String>();
    selectedItems.add("value2");
    selectedItems.add("value4");
}

Open Production Order with Mark for deletion

Hi
Friends again stuck in open production order
i want to calculate production order quantity for open production order,
only those production order which dont have mark for deletion.
I find a field in afpo XLOEK ..but it wont get reflects when done changes in CO02
Then i used the table JEST and i want to delete those aufnr which has deletion flag i wrote the folowing code pls do correct me where iam wrong .
IN this code deletes aufnr which are marked as deletion ?
SELECT afko~aufnr
       afko~gamng
       afko~plnbez
       afpo~dwerk
       afpo~psmng
       afpo~matnr
       INTO CORRESPONDING FIELDS OF TABLE i_afko
       FROM afko INNER JOIN
       afpo ON afpoaufnr = afkoaufnr
       WHERE afpo~dwerk = s_werks
      AND   afpo~matnr IN s_matnr
      AND afpo~elikz = space.
LOOP AT i_afko.
CONCATENATE 'OR' i_afko-aufnr INTO i_afko-aufnr.
MODIFY i_afko.
ENDLOOP.
IF NOT i_afko[] IS INITIAL.
SELECT jest~objnr
         jest~stat
         jest~inact
          INTO CORRESPONDING FIELDS OF TABLE i_jest
          FROM jest
         FOR ALL ENTRIES IN i_afko
         WHERE objnr = i_afko-aufnr.
ENDIF.
LOOP AT i_jest INTO wa_ijest.
IF wa_ijest-stat = 'I0076' and ( wa_ijest-inact = SPACE ).
    DELETE i_afko WHERE aufnr = wa_ijest-objnr.
ENDIF.
ENDLOOP.
i_afko1[] = i_afko[].
SORT i_afko BY matnr dwerk.
DELETE ADJACENT DUPLICATES FROM i_afko COMPARING matnr dwerk.
loop ....
calculate :quantity
endloop.
Regards and answers will be rewarded points

thnks
solved the problem
regards

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

How do I tell if a user profile is marked for deletion?

This is likely a question with a simple answer, but searching through Google and here hasn't helped.
How do I tell if a user profile has been marked for deletion?
Will it appear in the "Manager User Profiles" area of the User Profile Service Application management?
Do I need to look somewhere else?
This is probably obvious, and I just have looking disease, but your assistance is most appreciated!

As Paul said you can see that on UP admin page. also you can use powershell to get the list of all use in powershell.
Follow this blog:
http://iedaddy.com/2012/02/sharepoint-2010user-information-lists-and-user-profile-cleanup/
$upa = Get-spserviceapplication <identity>
Set-SPProfileServiceApplication $upa -GetNonImportedObjects $false
Set-SPProfileServiceApplication
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

To find out the list of user profiles marked for deletion using powershell or C# for SharePoint 2010

I have Disabled the MysiteCleanup timer Job and disabled few user profile accounts in AD. Then in SharePoint user profile service, ran the User profile full synchronise job.
I am able to find the marked for deletion records from the table (UserProfile_Full) in SQL server and also in the Manage User profile menu of the central admin under "Profile missing from import"
view. But am not getting these records, If I execute the below powershell command.
$upa = Get-spserviceapplication -name 'User Profile Service Application'
Set-SPProfileServiceApplication $upa -GetNonImportedObjects $true
This command shows only the system account and not the accounts, which are marked for deletion .
Please suggest how to get this result.
Thanks & Regards,
Yoga

What result do you get hen use use type below in powershell
$upa

Mark for delete for BP in CRM

Dear Sir,
We still use CRM 5.0, If I would like to mark for delete the business partner, how to mark for delete for BP in CRM??
And which table and field name to store for the mark for delete for business partner in CRM/
Please kindly advise.
Thnak you and best regards,
Vimol

Hello!
It's not supported to delete Business Partners in CRM (Web- or PC-UI). You can just flag obsolete or redundant Business Partners for archiving.
However there is the transaction BUPA_DEL you can use in order to delete BPs.
Here a link for further Information [http://help.sap.com/SAPHELP_CRM70/helpdata/EN/e0/f2683cf5e8fe67e10000000a114084/frameset.htm|http://help.sap.com/SAPHELP_CRM70/helpdata/EN/e0/f2683cf5e8fe67e10000000a114084/frameset.htm]
Best regards
Arno

HOW TO BLOCK THE PURCHASE ORDER AND MARK FOR DELETION ?

Hi ,
During the Creation of the Purchase order in the SAP System... After creation of the Purchase order should be blocked and a work item is created for the approver. If the Approver approves the Order then the Order is Unblocked and a mail send to the initiators inbox and the Order is Released. Similarly if the Approver Rejects the Purchase Order then its set for Mark for Deletion.
I did Po creation and release part. But i am facing problem during the Blocking & Unblocking the Purchase order. If he rejects i need to set for "Mark For Deletion". plz help me to solve this...

Hi,
You can use bapi 'BAPI_PO_CHANGE' to change the status of PO and for release use bapi BAPI_PO_RELEASE.
Hope this will help you.
Smit

Is there a way to search Numbers for UNCHECKED checkboxes?

Hi,
I'm attempt to build a spreadsheet to track incoming payments from various sources. I'm using checkboxes to confirm when a payment has been received. The question is: is there a way to search for unchecked checkboxes so that I can find instances where a payment has not been received?
Any tips or ideas would be greatly appreciated.

Hi Wyatt,
I agree with Jerry's suggestion that entering the date of payment rather than checking a checkbox is a better means of tracking the payments.
For either entry method, you can use conditional formatting to highlight unpaid rows.
For checkboxes, use Text is FALSE for the rule.
For dates, use Text does not contain 2013.
Examples are shown for both types of payment record:
Regards,
Barry

Mark For Deletion of STO's which purchase order history

Is there a way, where I can set mark for deletion for a STO which has partial goods issue/receipt { i.e. it has purchase order
history }
Thanks In Advance!!

Dear,
Check solved question: Re: To close old STO with inbalance GI and GR
Regards.
Syed Hussain.

"ORA-21700: object does not exist or is marked for delete" select from ADT

Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]

Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris

Mark for Translation - checkbox?

Similar Messages

Maybe you are looking for