Marketing Document Header Level UDF - Table Holding the Categories

Hi All,
I need the name of the table where categories of udf at header level of marketing document is stored.
I cheked the table CPRF but it does not show the category code in which the udf will be displayed in the form,
please help,
Thanx in advance,,,,

Hi
If you need category codes and descriptions, they are stored in the CUDC.
Thanks,
Gordon

Similar Messages

  • FMS On Header Level UDF

    Hi Experts.
    I want to set up approval procedure based on the sales warehouse.
    Sales Employee1 is only allowed to sell from WHS1. If the sales employee has to sell from a different warehouse, an approval has to be triggered.  I want a header level UDF the gets the Warehouse selected on the Invoice. If WHS2 is selected the UDF is updated and the approval procedure triggered.
    Please help
    Regards.

    In a header level  FMS you can not access the row level data. (Only the first line.)  So you can not move the warehouse code automatically to the header UDF. But you can force the user set a header level UDF to sign that this is a critical transaction. This can be done writing some code into the SBO_SP_TransactionNotification stored procedure.
    1. Create a header level UDF e.g. named ForApproval with possible values Y and N, with default value N.
    2. Write code in the SBO_SP_TransactionNotification stored procedure, that signals an error message u2018You should set ForApproval to Y!u2019  if U_ForApproval=u2019Nu2019, the originating user is not allowed to make transaction from this warehouse and there is any line from this warehouse.
    3. Set an approval procedure according to the header level ForApproval field. The user approving the document can add then the transaction.
    (To force setting the ForApprova flag insert the code in your  SBO_SP_TransactionNotification stored procedure after the line
    --     ADD     YOUR     CODE     HERE )

  • Control of document header level

    Hi all
    how we can control document header level like optional, required, display, suppressed
    how ?
    Get points
    Geeta

    You Can use OBA7.
    Yuo only control Refernce number and Document header text which are forming part of header. By checking the check boxes in required during document entry. Other feilds like doc date, post date, currency, period etc are system controls.

  • Which table holds the link between Purchase requisition and Reservations ?

    Hi Guys,
    We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
    I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
    I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
    Any idea where i can find the Preq and Reservations created through MRP run?
    Thanks
    VJ

    Try RKPF..
    thanks
    jz

  • Which SD Table holds the Technical Object Information?

    I am writing a report in SQ01 and can't find an SD table holding the technical objects information from the Sales contracts or orders. Can anyone suggest a table or which tables to joins I need. .
    Thanks
    Jen

    .... also:
    inner join with sales ordem item:
    VBPM-VBELN = VBAP-VBELN
    VBPM-POSNR = VBAP-POSNR
    Available fields:
    Technical reference object type
    Technical reference object
    Serial number

  • DB table holding the component materials in task list

    Hi all,
    I'd like to find out the relationship of the component materials inside a task list (IA07).
    I've found DB table PLKO and PLPO holding the data for task and operations respectively. Inside an operation, there are components.  I just can't find the DB table holding the components by F1 and where-used list ...
    Any advice?
    Thanks a lot.
    Message was edited by:
            Macy Lo

    PLMZ-PLNTY = PLKO-PLNTY
    PLMZ-PLNNR = PLKO-PLNNR
    PLMZ-PLNAL = PLKO-PLNAL
    PLMZ-ZAEHL = PLKO-ZAEHL
    PLMZ-PLNTY = PLPO-PLNTY
    PLMZ-PLNNR = PLPO-PLNNR
    PLMZ-ZUONR = PLPO-PLNKN
    PLMZ-ZAEHL = PLPO-ZAEHL
    if helpful, reward
    Sathish. R

  • Which table holds the Shopping Cart Approval Manager Name

    Can any one  please let me know which table holds the Approving Manger Name. Please find the scenario below.
    Employee creates the Shopping  Cart and forward the SC for Approval to Approval Manger. But approval manager will take some time to approve the shopping cart. I need to extract the approving manager's name who has still not approved the shopping cart into SAP BW.
    Thanks in Advance.
    Regards
    Venkata Agraharam.

    Hi,
    This is not answer. Just feedback from my project experience.
    I know some customer developed this kind of report which shows approver but they used the report only the first 1 month after go live. Approval monitoring was fun but you need someone who monitor it. Finally they realized high monitoring admin cost. Final solution was Alert Notification with BBP_ALERTING BADI which sends email to approver and admin when deadline is reached.
    Regards,
    Masa

  • Formatted search on header level UDF

    Hi All
    How do you call a UDF at Warehouse header level into purchase order row level?
    Thanks
    SV Reddy

    HI,
    and what if the Warehouse code is located in a UDF at header level of the marketing document ??  I mean, how can we access a UDF value in a FMS ?
    We tried the following, but it didn't work :
    SELECT T0.OnHand
        FROM OITW T0
        WHERE T0.ItemCode=$[$38.1.0]
        AND T0.WhsCode=$[$U_Nwr_WH.0.1]
    And it seems that the UDF do not have number assigned to it so we can't use the following syntax
    $[$99.0.1]
    thanks,
    Luce
    Edited by: Luce Veilleux on Nov 26, 2009 4:32 PM

  • Which table holds the reserved stock

    Hi All,
    In report - MMBE there are two columns unrestricted stock and reserved stock. Can you kindly share how this reserved stock is calculated which table/field holds the reserved stock. If I run the MMBE report now if it is determining the reserved stock assuming it comes from RESB which holds reservations what field in RESB gives me the reserved stock and how many days or what logic does MMBE use to calculate the reserved stock.
    Thanks
    Karen

    hi KarenFarr  .. check out this tables
    Table MCHB ,  MSLB
    regards
    chinnaiya

  • Appraisal document header not showing up in the Portal

    when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
    how can I show the appraisal document header in the Portal?
    regards,
    Tiberiu

    >
    Chris Thomas wrote:
    > Do you know how to set the template such that the Header is expanded (displayed) by default ?
    >
    > Chris
    hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document.

  • KLH1 - Which table holds the data?

    Hi, I'm looking for the table that holds the "Activity Type Groups" that are created under transaction KLH1.
    Any ideas where I can find this info?
    Thanks,

    Hello Graeme,
    Check the tables:
    COEJL                          CO Object: Line Items for Activity Types (
    COEPL                          CO Object: Line Items for Activity Types (
    COKL                           CO Object: Control Data for Activity Types
    COSL                           CO Object: Activity Type Totals
    COSLD                          CO Object: Activity Type Totals - of Which
    If useful please reward.
    Vasanth

  • Which table holds the position ID

    Hello
    Just a quick question. I have restricted access to PA30/PA40. I want to searc for an employee and find out the position ID
    Which table holds it? I want it to map the roles to positions
    Thanks

    Hello Jack,
    If you have restricted access to use PA20, then you would also have some restrictions for using transaction PPOME.
    If you search for PPOM / PPOME then you will find some more information on them to assign roles to positions.
    Cheers,
    Julius
    PS: Do you have a SAP Service Marketplace ID now?

  • Auto fill Row level UDF from Header Level UDF

    Hi,
    I have a header UDF (U_BU) and Row UDF (U_BU).
    Each time I add a row (item or service type) I want the row UDF to be loaded with  the header UDF data, using a formatted search on the row UDF.
    I also want the user to be able to change the ROW UDF if it is not meant to be the same as the header.
    Could someone help on this?
    Kind Regards,
    Eric

    Hi Eric,
    Try this,
    ->> Assign this FMS in UDF(row level) on A/R Invoice.
    ->> Auto Refresh of Item Description.
    SELECT $[OINV.U_BU]
    or
    for example, use variable
    (because this method of FMS will work all marketing doc.)
    SELECT $[$33.0.U_BU]
    ->> Assign the FMS in UDF on item rows.
    1. Goto the UDF and Click ShiftAltF2.
    2. Select the SEARCH BY SAVED QUERY.
    3. Assign the FMS Query.
    4. Select the AUTO REFRESH WHEN FIELD CHENGES.
    5. Select Item Description.
    6. Check the Display Saved Values.
    Regards,
    Madhan.

  • How to add UDF table on the Againg AR report.

    Hello,
    I need your help.
    I'm using SAP B1 2007A SP:01 PL:10.
    On the Customer Receivable Aging report (detailed receivables againg report), I'd like to add Database "OINV" of UDF on Sales Order but when I try to select source type-database and I don't see the table "OINV" from the selection....
    Could someone help me this ?
    Thank you.

    Hello,
    This report is one of the hard coded PLD that do not allow you to add UDF.
    Thanks,
    Gordon

  • Rounding PR00 in header level (+1 item with the same material)

    I have currently a problem, my customer prints the invoice by sumarizing the materials (line items with the same material and pr00), but by doing this the unit price by the quantity is not correct because the rouding at line item is not the same when we put all together.
    e.g.
    line 1 - qty = 7,5 and pr00 = 0,15 ->total of 1,125 -> stays in line item with 1,13
    line 2 - qty = 7,5 and pr00 = 0,15 ->total of 1,125 -> stays in line item with 1,13
    in the layout we have a total of 2,26, but in real we must have 2,25 if we see this like a header group.
    Can we have a rounding solution for the PR00? like we have for discounts using a rouding routine?
    thanks in advance,
    joao

    in the layout we have a total of 2,26, but in real we must have 2,25
    Since the issue is only in output of billing document, you have to take the help of ABAPer and modify the smart form.
    thanks
    G. Lakshmipathi

Maybe you are looking for