Marketplace no longer works error code

Since yesterday, whenever I try to go to the Marketplace and download an app or search for an app or read comments about an app I keep getting the message
Attention:
A network error has occurred. Retry , or cancel and return to the previous screen.
It is getting very frustrating to do anything with the phone.
I can still make calls, but that is not really why I hage the droid 2. I have a wireless network in my home that is working fine (I am on a laptop now typing this message)
anyone else have this happen?

leighkcook wrote:
Since yesterday, whenever I try to go to the Marketplace and download an app or search for an app or read comments about an app I keep getting the message
Attention:
A network error has occurred. Retry , or cancel and return to the previous screen.
It is getting very frustrating to do anything with the phone.
I can still make calls, but that is not really why I hage the droid 2. I have a wireless network in my home that is working fine (I am on a laptop now typing this message)
anyone else have this happen?
Does it ever connect when you press Retry?  It might have just timed out.
Otherwise you might want to try the following.
Go to Settings > Applications > Market >Clear data or Uninstall Updates. (depends on your phone)
Power cycle the phone then Open the market app. If you had to uninstall updates it should ask you to install the update again.
Hope this helps.

Similar Messages

  • Printer will not work: error code 0xc19a0022

    Printer will not work: error code 0xc19a0022

    Hello citizenED,
    Welcome to the HP Forums.
    I see that you are getting the error code " 0xc19a0022 " .
    I do have a few steps that we can try. 
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why  will photoshop not open after loading it to new iMac computer from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

    Why will Photoshop CS4 not open after loading to new iMac from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

    A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
    The answer is easy: Reinstall CS4 from your disc. and apply all updates.
    Gene

  • Abc wont work error code 400-1

    Abc wont work error code 400-1

    Hey xoxokt,
    Thanks for the question. The following resource outlines troubleshooting information for third-party content providers on Apple TV:
    Apple TV: Troubleshooting third-party content providers
    http://support.apple.com/kb/HT200072
    If you have playback issues with a content provider's services
    In most cases, you can isolate playback issues to your home network, your broadband connection, or a possible outage with a content provider. To see if your issue is affecting multiple services or a specific content provider, try another service. For example, play a movie trailer from the main menu.
    - If the issue is affecting multiple services on your Apple TV, see how to troubleshoot playback performance.
    - If the issue is affecting a single content provider on your Apple TV, restart your Apple TV by going to Settings > General > Restart. If the issue continues, you might need to contact the content provider.
    Thanks,
    Matt M.

  • PhotoshopCS6 file is not longer working, error message reads unreadable

    PhotoshopCS6 file is not longer working, error message reads unreadable. PLEASE  HELP!!!!!! I've spent so many hours, the copied that I do have are in JPEG. and  PNG and they arnt as clear.

    And what exactly? You have neitehr provided proper system info nor the exact error message nor told us anything about your documents. If you are referring to PSD files suddenly registering as damaged, you might wanna check the forum. This has been discussed quite a bit. and of course you might want to read some primer on the big Internet why people use versioning/ incremental saves and backups to avoid critical files being lost...
    Mylenium

  • I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

    I have received the "licensing has stopped working" Error code 150:30. I have done all 8 suggested fixes and have had no luck fixing this mess. Anyone able to help.

    Great!
    Now in Terminal at the $ prompt type   sudo python <leave a space after that>  Do not press enter or return yet.
    Drag and drop "license recover.py" into the Terminal window, then press enter or return.
    You should see this result:    Confirm that you do.

  • PR release procedure no longer working-error MEPO 822

    I've raised a message previously regarding PR release problem. Now i've found something that need expert helps to clarify on this.
    Situation :
    One of my client(ABC) implemented release procedure for PR which is not assign to value limit. It is by document type. They had 2 document types; NB and RNB.
      NB = NOT subject to release
      RNB = SUBJECT to release.
    So when they :
    create a PR with document type RNB - it will goes for approval.
    create a PR with document type NB - it will not go to approval.
    It was working fine until after they created a new document type which copied from NB, called ZTP.
      ZTP = NOT subject to release.
    They did not touch anything on PR release configuration. However, the release has no longer working. Means, when they create PR with document type RNB, it will NOT go for approval as it suppose to. I've check in configuration, all are fine.
    Findings:
    I've created a PR, and go to ME45N to release it but system prompt me an error message
    "Purchase requisition 10000066 cannot be released". I check on the message data,  the error coming from MEPO, message number 822.
    So i check in OSS and found a note which is similar to this case.
    Note 939371 - Overall release PR using ME54N gives error MEPO 822
    Link : https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=939371#Text
    But my question is,is it also applied to ME51N and without external application as per my client's case?
    Please anyone help.
    Thanks.

    Hi guys!
    Wants to share something. I had a problem to release my PR. When i want to release PR via ME54N, system give me error message "Purchase requisition 10000066 cannot be released". When i checked message data, it is coming from MEPO Messafe 822. So i asked SAP, they said this one is caused by different issue. Here's the reply from SAP.
    Here's the reply from SAP :
    Purchase requisition 10000066 cannot be released
    Message no. MEPO822
    Now click the other requisition button and let say
    choose Purchase requisition 10000068,
    Execute ME54N again:
    Purchase requisition 10000068 cannot be released
    Message no. MEPO822
    Comment/explanation:
    The log incidence seems not having problem with release
    strategy as it was ok but it was the last PR was called
    everytime ME54N was called. This same as it works in enjoy
    transaction ME21N/ME22N or ME51N/ME52N.
    For example, When using ME21n or ME22n to create or change PO,
    after saving the PO. There are 2 ways to exit the transaction,
    1, enter another T-code or use /n to exit directly.
    2, use 'F3' or the 'green tick' to exit ME21n (or ME22n)
    Then you can access ME23n to see the difference.
    For the 1st way, ME23n won't display the last PO created in ME21n
    For the 2nd way, ME23n will display the last PO just created!!!
    Please see attached consulting note 595627 that explains a new
    functionality as of release 470:
    Due to performance problem, a decision had to be taken about the way to
    use transactions. If you leave transaction ME21N/ME22N via the
    exit button (F3), the expected PO will be displayed next time you use
    these transactions. But if you quit abruptly (/nXXX) the PO number
    won't be saved for the next transaction ME2?N.
    As SAP note is the official document to explain system behavior,
    this document is provided by SAP developement to explain this system
    behavior to customers.
    In your case, you had used ME54N and this was same as you use ME53N.
    The last PO always display. You may try to view Purchase requisition
    with release strategy, for example Release group R1, Rel. strategy
    R1, then after this execute transaction ME54N again, the message
    MEPO822 will not be there anymore.
    Hope this will help you guys if you're having the same problem in future.
    Thanks,
    Crystal.

  • License is no longer working Error - 150:30 - CS4

    I have seen this question here but have not seen a solution.  I recently (grudgingly) upgraded to Lion 10.7
    Now all my CS4 applications won't opne and give me this error that the license is no longer working!  I have gone through all the fixes that Adobe recommends and nothing works.  The only thing I have not done is uninstall everything and reinstall - I am really afraid to do that.
    Has anyone found a solution to this?  I am really upset and depend on Dreamweaver and Photoshop for my work!

    Hey Marty,
    had the same problem here with PSE 8 after system recovery from time machine backup. I also updated to Lion couple of month ago. I also tried all of the listed solutions on the adobe support pages but none of them worked. The folder FLEXNet_Publisher in the systems hard drives folder Preferences, which it says to be deleted does not exist and was only found in the application support folder. I also tried all of the other solutions listed on this page: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html  and had more or less the same problems, it did not work.
    I found the following solution myself by doing this:
    go to the folder [hard drive]/Library/Application Support/FlexNet Publisher and make a copy of this folder
    then go to the folder [hard drive]/Library/Preferences and paste this copied folder there.
    Then try again to start your application and now it should show you the licenceregistry window. Type in your serial number and confirm. Then the application starts and runs properly. So it was on my system.

  • Deskjet Ink Advantage 3525 - WiFi settings not working, error code 0XB808DE

    Welcome all
    When I enable and try to setup up a wireless connection with my printer a error message appears.
    Error code is 0XB808DEDE (or capital o instead of zero in the beginnig)
    When I turn off the wireless module printer function normally, priting only from USB connection.
    I've try reset to the factory defaults settings and unplugging power cable for 60 seconds to hard reset the printer.
    No ideas left.
    My region is Europe - Poland.
    Best wishes
    Kamila

    Welcome to the HP Community @Namilka ,
    I understand you are noticing a "0x" error code on your Deskjet Ink Advantage 3520, and I wanted to reach out. Normally the error message means that the printer is experiencing an Ink System Failure, Printer Failure, or a failure with the printhead. As you have already tried resetting the printer and the error comes back, I would next recommend contacting HP directly at the information below to see about a replacement unit.
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.​html
    Best wishes to you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Satellite Pro A210 DVD Drive not working - error code 39

    Hi All
    My Satellite Pro A210 dvd drive is not loading.
    When I looked into it it showed an error code 39.
    I tried uninstalling it and reinstalling it but it's still not working.
    Any ideas?

    Hi
    From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
    You can try this workaround:
    Go to device manager and delete the CD/DVD drive from the device list.
    Then go to registry (regedit) and remove the upper and lower filters from the key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    Then reboot the unit and test it again
    I think this should help!

  • DVD burner not working Error code 0x80020022 & 0x8002006E

    When I try to burn a DVD I get the following errors . (Error code 0x80020022) & (0x8002006E)
    When I put a dvd movie in it will show on the desktop and play in dvd Player.
    It will show a CD in the finder and will play it in the finder and in iTunes. iTunes is can also burn CD.
    I have brunt some dvds in the past month but it was hit and miss. Now I can not burn any dvds.
    I booted up my iMac from my MacBook when I go to burn the dvd I get the same error. So now I'm not to sure if it is a software issue. I have also done a restart while holding P & R "option & Apple" to reset the Pram.
    I'm going to erase the HD tonight and reinstall OS 10.5 to see if that fixes the problem.
    If there is anything more I can do please let me know. I dont mind replacing the Supper Drive but I dont want to spend the money if that is not going to fix the problem.

    I keep getting this code come up when i try to burn 0x80020022. My imac is 8 months old, and after looking on mac forums the only thing that seems to work is to go in and play around with the international system prefs. It will then burn a CD, although very slowly. A week later I go to burn a cd and this happens again! This surely can't be right with an 8 month old machine, and does this mean my DVD drive is going to die soon? I can't keep having to adjust the prefs every week.
    Does anybody have any answers?
    Cheers

  • My ITunes will not work error code 2503

    window XP cannot uninstall ITunes. ITunes will not operate. error code 2503

    Hello, bearbassman. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through when receiving this error.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • SD-R6112 drive no longer recognized - Error Code 19 in device manager

    Hello!
    I have two opticals (one internal, one external) that suddenly are unrecognized. Both are showing up in device manager with the same error message as follows:
    Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
    After uninstalling and re- installing both several times, including rebooting the devices still will not change status.
    The devises are: TOSHIBA DVD-ROM SD-R6112 (internal)
    TSST corp CD/DVDW SH-S182M USB Device (external)
    Both devices were working just fine the last time I was on my laptop, 2 days ago.
    I assume I need to delete some registry entries, but without specifics, I'm not going there!
    Can anyone help me?
    Thanks so much
    Photographer with customers waiting for images...
    Susan DeFurianni

    In my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure opening the service registry entry, or if the driver name cannot be obtained from the service registry entry.
    As far as I know Microsoft provides these solution options:
    Click Uninstall, and then click Scan for hardware changes to load a usable driver.
    Restart the computer in Safe Mode, and then select Last Known Good Configuration. This rolls back to the most recent successful registry configuration.
    Furthermore you could try to remove the Upperfilters and LowersFilters from this registry entry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4 D36E965-E325-11CE-BFC1-08002BE10318}
    If it doesnt help then access the device manager reinstalls the primary and secondary channel from the IDE ATA/ATAPI Controller section and reboot.
    Good luck and Bye

  • Idvd no longer works error#34506

    I can no longer burn an IDVD on my G5 I have all the latest updates and I have tried everything to get it to work. I now always get an ERROR 34506. Could one of the online updates have created this problem because it always worked up till now?

    I've just created my third coaster this weekend. Here's what I've got, and what I get.
    Project size
    DVD Capacity: 112.51 minutes
    Motion Menus: 3:45 of 15
    Tracks: 5 of 99
    Menus: 4 of 99
    I'm using the Fish Two theme. Three objects (Play Movie, Scene Selection, Extras). I've got one large video (Approximately 1 hour 10 minutes, with eight chapters), one small video approximately 10 minutes (no chapters), one long slide show (320+ slides with music but no transitions) and one short slide show (45 slides with music and transitions).
    I moved all of my chapter positions 2 seconds from any transitions. The DVD project previews OK. I'm using a G5 with lots of memory and RAM.
    When I tried to save the DVD with Best Performance on, it said I needed a dual sided disc. I tried with Best Quality and waited while it went through the whole burning process, and still got "Burning finished. Errors were found during the burning process." "The error #34506 was reported."
    I've spent the whole weekend working on this. Is this too much for IDVD to handle? Is this an advertisement for Final Cut Pro?

  • ITunes Match no longer working: error -9810

    Hi,
    I've been using iTunes Match for several months on my 2.4Ghz Intel Core 2 Duo Macbook Pro running OS X Lion 10.7.4. It's taken ages to upload my music (in stages) to the iCloud, but now my library of just over 25,000 tracks is nearly all in the cloud with <900 tracks left to upload. But in the last fortnight I haven't been able to continue with the upload. Initially I was getting an 4010 error message when processing step 1. Now the message is error -9810.
    My iCloud files are still accessible on my iPad and iPhone, but I cannot get passed Step 1 on the MBP.
    I've read suggestions for fixes and tried logging out and back in. It still gives the same error.
    Also, Genius no longer is functioning. I turned it off and back on, and when I try to update it gives me a -9810 error as well.
    The iCloud system status page indicates the servers are running ok, so I'm not sure what the problem is.
    Can anyone help?
    Chris

    I seem to have discovered the issue was related to my routers firewall. Sometimes my router plays up and becomes restrictive. I've noticed this before when I get 'strict NAT' errors on my xbox.
    I reset the router and it seems to have opened up the connection and allowed the itunes match process to continue.

Maybe you are looking for