Marking object names to be identified in fxg code

We have engaged a designer to build screen layouts out that we want to replicate in Flash builder- Pls note we are not exporting the layout as Fxg as we need to build subcomponents within the layout
So we have tried to export the Illustrator output in fxg format and check the settings which we replicate in FlashBuilder. We would like to name the objects in Illustrator meaningfully so we can connect the front-end with names in the fxg code.Right now the fxg code runs into 1000+ lines and challenging to connect the individual controls with objects in the code. Currently we see an objID.
How do we name objects in Illustrator meaningfully from the front end?

Did you try naming them in the Layer Panel?
here I name an object rectangle and it shows up as rectangle the symbols are called bubble they show up as well so I think you may simply name the object and then look for userLabel="name" and you will be able to find the objects in the case of a symbol they will all be the same so you can change all.

Similar Messages

TABLE / Object name of the organisational unit

Hi,
What's the table to found the object name of the organisationel unit (T-Code : PPOM)
Thanks.

Hi,
Check T527X.
Regards,
Dilek

Question mark in object name...

Please help me!
After full database import there are a few triggers, packages are invalid.
When I try to recompile them I got ORA-00911, because unfortunately there is ? character in their name...
How can I compile them? Please, help me!
Thank you in advance!
OWNER OBJECT_NAME OBJECT_TYPE
SMS_1 LNP?Config TRIGGER
SMS_1 LNP?PortedDN TRIGGER
SMS_1 LNP?ServiceKeyTable TRIGGER
SMS_1 WhiteList?CallBarring TRIGGER
SQL> alter trigger sms_1.LNP?Config compile;
alter trigger sms_1.LNP?Config compile
ERROR at line 1:
ORA-00911: invalid character

If you surround your object name by double quotes (") you're fine.
SQL> CREATE TABLE "My?Table" ( col1 number );
Table created.
SQL>
SQL> SELECT table_name
2 FROM user_tables
3 /
TABLE_NAME
My?Table
SQL>
SQL> DROP TABLE "My?Table";
Table dropped.
SQL>
SQL> CREATE TABLE "Truncate table Employees" ( col1 number
Table created.
SQL>
SQL> SELECT table_name
2 FROM user_tables
3 /
TABLE_NAME
Truncate table Employees
SQL>
SQL> DROP TABLE "Truncate table Employees";
Table dropped.

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Spaces in SQLServer Object Names

Hello,
I am currently upgrading my skills. I am taking an ASP.NET class that uses the Microsoft SQLServer example database, NorthWind.
I migrated the database into Oracle so I could complete the homework assignments and project using the same database as the rest of the class.
The migration went smoothly except for 2 issues:
1. The Oracle created model created DATE columns for SQLServer DATE columns. However, the data stored in the database was more like the Oracle TIMESTAMP data type. The automatic migration would not load tables with DATE data in them, (Employees and Order Details).
As it was, I manually moved the 2 tables (using the generated scripts). I altered the NLS_DATE_FORMAT in the .BAT file to match the field data (YYYY-MM-DD HH24:MI:SS) and I changed the .DAT file to remove the .000 (milliseconds) from the data in record field. Perhaps I should have just changed the type in the Oracle model. I am still not convinced however the automatic migration would have handled the DATE data that was stored by SQLServer as for example: 1998-07-15 00:00:00.000
2. There is a table called Order Details <- note the blank between Order and Details. In Microsoft's SQL this table is referenced as [Order Details] in views, stored procedures and DML.
However the migration workbench treated this migration complexity by replacing the brackets with quotes. So, I ended up with dbo."Order Details".OrderID for which the <Oracle SQL?> parser would reject.
In fact, there was a name change done by another part of the workbench that changed the table name to Order_Details. Thus, it appeared as though there was an inconsistent handling of table names: if the migration workbench is context sensitive to "Order Details" being a table name when used.
If the workbench is NOT context sensitive, the I am not sure of the ramifications of attempting to treat [Order Details] as Order_Details, instead of "Order Details".
Also, there are stored procedures, like [Sales By Year] where by the ALTER procedure [Sales by Year] line was translated into CREATE OR REPLACE PROCEDURE "Sales By Year", yet there was a name change of the stored procedure object to Sales_By_Year. Again the parser would not CREATE OR REPLACE the procedure.
As far as the Northwind database is concerned, it seems as though if the migration workbench were to treat [X Y Z] as X_Y_Z instead of "X Y Z", then there would be consistent handling of objects with spaces in their names.
Bottom line - Issue #2: by design or a defect?

1. The code does a SUBSTR(date,1,19) so that milli second data will be stripped off if the target type is DATE, but you should use Oracle TIMESTAMP to hold on to
milisecond data.
2. The Northwind space issues and bracket issues are defects. The recommended Oracle approach is not to have spaces in identifiers, so you get the underscores as replacements whether you like it or not. Otherwise you will end up having to quote all theses identifiers and the references to them will be case sensitive, and those last couple of things the OMWB is not good at so using the underscores saves the OMWB developers a lot of hassle. But as you see, this seems to have been
inconsistantly applied.
The only way forward is for you to decide whether you want references to object names to be case-insensitive (so replace spaces with underscores) or you want to have spaces in the names, so you must use quoted identifiers. Then you just have to be consistent on the approach you choose.

ERROR - JBO-25005: Object name for type View Object is invalid

Hi All,
I am getting this error "JBO-25005: Object name for type View Object is invalid" while executing my VO query in Controller code. Can any one please tell me the reason behind this error?
I am creating a VO dynamically and .xml file of a VO is placed in a proper directly. Please let me know some inputs to resolve this.
Thanks & Regards,
-Abm

I found the below explanation for the error mentioned. Check if your package name, Object names confirm to the standard specified
JBO-25005: InvalidObjNameException
Cause: An attempt has been made to associate a business component name with an object for which it is not valid.
Action: The name should be a valid Java identifier with no spaces or punctuation. Names are of the format myProjectPackage.BusinessPackage.BusinessComponent

Invalid object name 'SVERS'

Hello,
When trying to perform an Upgrade of a BW3.0B to BW3.5, Prepare Phase, an error occurs in script MSSCONCHECK.SQL.
- Msg 208, Level 16, State 1, Server SRVDW, Line 1
Invalid object name 'SVERS'.
Can anyone help?
Thank you.
Regards,
PT

I have similar eror message during upgrade from ECC 5.0 to ECC 6.0 on MS SQL 2005. The output from my sapup is as shown below:
>> 07:39:34 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system: [AWD]
SAP SYSTEM ID     =
The hostname of your central SAP server: [SERVER01]
SAP SYSTEM HOST   =
Enter the SAP instance number: [02]
INSTANCE NUMBER   =
The system identifier of your database: [AWD]
DATABASE ID       =
The hostname of your database server: [SERVER01]
DATABASE HOST     =
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
      SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
       after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
       Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3
gain
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
      SAPup message
SAPup> SQL-scripts must be executed by the NT user account SERVER01\awdadm.
       Check your installation of the integrated security procedure
       on host SERVER01 and make sure that a login for the NT user
       SERVER01\awdadm exists with the following rules:
       - user SERVER01\awdadm owns the role System Administrators
       - user SERVER01\awdadm has the default database AWD
SAPup> Integrated security installed correctly?
            - "no"
            - "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
I'm currently running both Solution Manager 4.0 and mySAP ERP 2004 SR1 on the same box in Development environment.
Has anyone gotten a breakthrough on this error messages? Mode set to both SQL and Windows Authentication, can do selct * from SVERS for solution manager database but not for ECC 5.0.
Urgent!!!!

Object name & name

Hi all,
When we try to create a bussiness object through transaction SWO1,it asks us for object name & name.
Can anyone please tell me the difference between them & what actually they are?
Regards,
Bhumika

For Object name :
Descriptive, English ID of a business object in the Business Object Repository (BOR).
Business objects are identified in the BOR both by their object ID (for example, SalesOrder) and by an internal, technical key (for example, BUS2032). Both means of identification must be unique among all object types.
Business objects are often addressed using the object ID from external applications, whereas within the BOR they are usually identified using the internal key. Initially only the internal key was used, but the extensive use of business objects gave rise to the need for addressing them using an ID. For compatibility reasons, both means of identification are now maintained.
The object ID is in English and can be a maximum of 32 characters, using both uppercase and lowercase.
Examples:
o Material
o BusinessPartner
o SalesOrder
The object ID is also used as a proposed name for container elements in the workflow container and task container, if an element is to be created there with a reference to an object of the type in question.
for NAME :
The name should be meaningful enough for it to be used to select an object type.

What is maximum length of oracle database objects name

Hi all,
Can anyone tell me what is maximum length of oracle database objects name .
I guess it is 30 ,correct me if i am wrong thank you.
regards,
P Prakash

Some objects (like synonyms or java classes) can have longer names than 30 chars:
SQL> create or replace synonym empempempempempempempempempempempempemp for emp
Synonym created.though internally oracle will generate short names for such objects:
SQL> select synonym_name from user_synonyms where synonym_name like '%EMPEMPEM%'
SYNONYM_NAME
/969ea190_EMPEMPEMPEMPEMPEMPEM
1 row selected.and not always will the long name be actually usable:
SQL> select * from empempempempempempempempempempempempemp
Error at line 1
ORA-00972: identifier is too long

Schema name and object name quoted together in MRU after v3 to v4 upgrade

After upgrading from v3 to v4 an app has a system generated Multi Row Update function that is broken;
PL/SQL : ORA-00972: identified is too long
declare
function x return varchar2
is
begin
    begin
      for c1 in ( select "MY_SCHEMA.MY_SEQUENCE".nextval pk from dual ) loop
       return c1.pk;
      end loop;
    end;
    return null;
end;
begin
dbms_output.put_line(x);
end;Note the Schema Name and the Object Name have been quoted together!
Is this a known issue and do you know of a fix?
Many thanks in advance
Craig

Hi Craig,
this problem is not known so far.
I had a look at the code and that change has been made because of multi byte support for sequence names and because of security reasons.
We try to avoid breaking changes in applications, but it looks like we haven't expected that developers are specifying sequence names prefixed by the schema name.
Maybe the following workaround is feasible for you:
1) Find all tabular form columns which are using a sequence with a schema prefix as primary key source
select *
from apex_application_page_rpt_cols
where primary_key_column_source_type = 'S'
   and instr(primary_key_column_source, '.') > 0;2) Go to that tabular form column and remove the schema prefix
3) If the sequence is really in a different schema than the parsing schema of your application, create a synonym for it.
Hope that solves your problem.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Schema Name is not identified in persistence.xml

Hi
i am calling the schema in persistence.xml, schema name is not identified, if i give in entity level it working.
<property name="toplink.jdbc.schema" value="mySchema"/>
my persistance.xml folows
<persistence-unit name="TestDB2" transaction-type="RESOURCE_LOCAL">
<provider>oracle.toplink.essentials.PersistenceProvider</provider>
<class>com.test.jpa.TblCustAddress</class>
<class>com.test.jpa.TblCustomer</class>
<class>com.test.jpa.TblCustContact</class>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="toplink.jdbc.url" value="url"/>
<property name="toplink.jdbc.user" value="userName"/>
<property name="toplink.jdbc.driver" value="com.ibm.db2.jcc.DB2Driver"/>
<property name="toplink.jdbc.password" value="Password"/>
<property name="toplink.jdbc.schema" value="mySchema"/>
</properties>
</persistence-unit>
please help me on this.......
srini

Hi Vinay,
I am using the three entityclasses, SimpleSessionCustomizer and one mainclass see the below.
persistence.xml
<persistence-unit name="TestDB2" transaction-type="RESOURCE_LOCAL">
<provider>oracle.toplink.essentials.PersistenceProvider</provider>
<provider>org.apache.openjpa.persistence.PersistenceProviderImpl</provider>
<class>com.test.jpa.TblCustAddress</class>
<class>com.test.jpa.TblCustomer</class>
<class>com.test.jpa.TblCustContact</class>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="toplink.jdbc.url" value="jdbc:db2://host:port/TESTDATA"/>
<property name="toplink.jdbc.user" value="user"/>
<property name="toplink.jdbc.driver" value="com.ibm.db2.jcc.DB2DataSource"/>
<property name="toplink.jdbc.password" value="password"/>
<property name="toplink.session.customizer" value="com.test.jpa.impl.SampleSessionCustomizer" />
</properties>
</persistence-unit>
EntityClass One:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.test.jpa;
import java.io.Serializable;
import java.util.Collection;
import java.util.Date;
import javax.persistence.Basic;
import javax.persistence.CascadeType;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.Id;
import javax.persistence.Lob;
import javax.persistence.OneToMany;
import javax.persistence.Table;
import javax.persistence.Temporal;
import javax.persistence.TemporalType;
import javax.persistence.UniqueConstraint;
* @author Srinivasulu.Kristnam
@Entity
@Table(name = "tblCustomer", schema="POLINFO", uniqueConstraints = {@UniqueConstraint(columnNames = {"txtGivenName1", "PK_customer"}), @UniqueConstraint(columnNames = {"FK_contact", "PK_customer"}), @UniqueConstraint(columnNames = {"txtLatestAgt", "txtType", "PK_customer"}), @UniqueConstraint(columnNames = {"txtType", "PK_customer"}), @UniqueConstraint(columnNames = {"txtLegacyID", "PK_customer"}), @UniqueConstraint(columnNames = {"FK_address", "FK_contact", "PK_customer"})})
//@NamedQueries({@NamedQuery(name = "TblCustomer.findAll", query = "SELECT t FROM TblCustomer t"), @NamedQuery(name = "TblCustomer.findByPKcustomer", query = "SELECT t FROM TblCustomer t WHERE t.pKcustomer = :pKcustomer"), @NamedQuery(name = "TblCustomer.findByFKcustomer", query = "SELECT t FROM TblCustomer t WHERE t.fKcustomer = :fKcustomer"), @NamedQuery(name = "TblCustomer.findByFKcontact", query = "SELECT t FROM TblCustomer t WHERE t.fKcontact = :fKcontact"), @NamedQuery(name = "TblCustomer.findByFKaddress", query = "SELECT t FROM TblCustomer t WHERE t.fKaddress = :fKaddress"), @NamedQuery(name = "TblCustomer.findByTxtCustomerID", query = "SELECT t FROM TblCustomer t WHERE t.txtCustomerID = :txtCustomerID"), @NamedQuery(name = "TblCustomer.findByTxtLegacyID", query = "SELECT t FROM TblCustomer t WHERE t.txtLegacyID = :txtLegacyID"), @NamedQuery(name = "TblCustomer.findByTxtNationalID", query = "SELECT t FROM TblCustomer t WHERE t.txtNationalID = :txtNationalID"), @NamedQuery(name = "TblCustomer.findByTxtSSNID", query = "SELECT t FROM TblCustomer t WHERE t.txtSSNID = :txtSSNID"), @NamedQuery(name = "TblCustomer.findByTxtSex", query = "SELECT t FROM TblCustomer t WHERE t.txtSex = :txtSex"), @NamedQuery(name = "TblCustomer.findByDteDOB", query = "SELECT t FROM TblCustomer t WHERE t.dteDOB = :dteDOB"), @NamedQuery(name = "TblCustomer.findByTxtAgtCd", query = "SELECT t FROM TblCustomer t WHERE t.txtAgtCd = :txtAgtCd"), @NamedQuery(name = "TblCustomer.findByTxtLatestAgt", query = "SELECT t FROM TblCustomer t WHERE t.txtLatestAgt = :txtLatestAgt"), @NamedQuery(name = "TblCustomer.findByTxtFamilyName", query = "SELECT t FROM TblCustomer t WHERE t.txtFamilyName = :txtFamilyName"), @NamedQuery(name = "TblCustomer.findByTxtGivenName1", query = "SELECT t FROM TblCustomer t WHERE t.txtGivenName1 = :txtGivenName1"), @NamedQuery(name = "TblCustomer.findByTxtGivenName2", query = "SELECT t FROM TblCustomer t WHERE t.txtGivenName2 = :txtGivenName2"), @NamedQuery(name = "TblCustomer.findByTxtNickname", query = "SELECT t FROM TblCustomer t WHERE t.txtNickname = :txtNickname"), @NamedQuery(name = "TblCustomer.findByTxtCreatedby", query = "SELECT t FROM TblCustomer t WHERE t.txtCreatedby = :txtCreatedby"), @NamedQuery(name = "TblCustomer.findByTxtChangedby", query = "SELECT t FROM TblCustomer t WHERE t.txtChangedby = :txtChangedby"), @NamedQuery(name = "TblCustomer.findByTxtOffice", query = "SELECT t FROM TblCustomer t WHERE t.txtOffice = :txtOffice"), @NamedQuery(name = "TblCustomer.findByDteCreated", query = "SELECT t FROM TblCustomer t WHERE t.dteCreated = :dteCreated"), @NamedQuery(name = "TblCustomer.findByDteLastupd", query = "SELECT t FROM TblCustomer t WHERE t.dteLastupd = :dteLastupd"), @NamedQuery(name = "TblCustomer.findByTxtStatus", query = "SELECT t FROM TblCustomer t WHERE t.txtStatus = :txtStatus"), @NamedQuery(name = "TblCustomer.findByTxtType", query = "SELECT t FROM TblCustomer t WHERE t.txtType = :txtType"), @NamedQuery(name = "TblCustomer.findByTxtFindphone", query = "SELECT t FROM TblCustomer t WHERE t.txtFindphone = :txtFindphone"), @NamedQuery(name = "TblCustomer.findByTxtFindpostCd", query = "SELECT t FROM TblCustomer t WHERE t.txtFindpostCd = :txtFindpostCd"), @NamedQuery(name = "TblCustomer.findByDteExternupd", query = "SELECT t FROM TblCustomer t WHERE t.dteExternupd = :dteExternupd"), @NamedQuery(name = "TblCustomer.findByTxtSource", query = "SELECT t FROM TblCustomer t WHERE t.txtSource = :txtSource"), @NamedQuery(name = "TblCustomer.findByTxtID", query = "SELECT t FROM TblCustomer t WHERE t.txtID = :txtID"), @NamedQuery(name = "TblCustomer.findByTxtEmail", query = "SELECT t FROM TblCustomer t WHERE t.txtEmail = :txtEmail"), @NamedQuery(name = "TblCustomer.findByTxtURL", query = "SELECT t FROM TblCustomer t WHERE t.txtURL = :txtURL"), @NamedQuery(name = "TblCustomer.findByTxtSicCd", query = "SELECT t FROM TblCustomer t WHERE t.txtSicCd = :txtSicCd"), @NamedQuery(name = "TblCustomer.findByIntStamp", query = "SELECT t FROM TblCustomer t WHERE t.intStamp = :intStamp"), @NamedQuery(name = "TblCustomer.findByTxtClientkey", query = "SELECT t FROM TblCustomer t WHERE t.txtClientkey = :txtClientkey"), @NamedQuery(name = "TblCustomer.findByTxtExceptionCd", query = "SELECT t FROM TblCustomer t WHERE t.txtExceptionCd = :txtExceptionCd"), @NamedQuery(name = "TblCustomer.findByTxtScoregroup", query = "SELECT t FROM TblCustomer t WHERE t.txtScoregroup = :txtScoregroup"), @NamedQuery(name = "TblCustomer.findByTxtImportanceRating", query = "SELECT t FROM TblCustomer t WHERE t.txtImportanceRating = :txtImportanceRating"), @NamedQuery(name = "TblCustomer.findByTxtTerritory", query = "SELECT t FROM TblCustomer t WHERE t.txtTerritory = :txtTerritory"), @NamedQuery(name = "TblCustomer.findByTxtRegno", query = "SELECT t FROM TblCustomer t WHERE t.txtRegno = :txtRegno"), @NamedQuery(name = "TblCustomer.findByDteIncorp", query = "SELECT t FROM TblCustomer t WHERE t.dteIncorp = :dteIncorp"), @NamedQuery(name = "TblCustomer.findByTxtIncorpCountry", query = "SELECT t FROM TblCustomer t WHERE t.txtIncorpCountry = :txtIncorpCountry"), @NamedQuery(name = "TblCustomer.findByTxtSourceOrigin", query = "SELECT t FROM TblCustomer t WHERE t.txtSourceOrigin = :txtSourceOrigin"), @NamedQuery(name = "TblCustomer.findByTxtFullName", query = "SELECT t FROM TblCustomer t WHERE t.txtFullName = :txtFullName")})
public class TblCustomer implements Serializable {
private static final long serialVersionUID = 1L;
@Id
@Basic(optional = false)
@Column(name = "PK_customer", nullable = false, length = 12)
private String pKcustomer;
@Column(name = "FK_customer", length = 12)
private String fKcustomer;
@Column(name = "FK_contact", length = 12)
private String fKcontact;
@Column(name = "FK_address", length = 12)
private String fKaddress;
@Basic(optional = false)
@Column(name = "txtCustomerID", nullable = false, length = 12)
private String txtCustomerID;
@Basic(optional = false)
@Column(name = "txtLegacyID", nullable = false, length = 10)
private String txtLegacyID;
@Column(name = "txtNationalID", length = 20)
private String txtNationalID;
@Column(name = "txtSSNID", length = 20)
private String txtSSNID;
@Column(name = "txtSex")
private Character txtSex;
@Column(name = "dteDOB")
@Temporal(TemporalType.TIMESTAMP)
private Date dteDOB;
@Column(name = "txtAgtCd", length = 10)
private String txtAgtCd;
@Column(name = "txtLatestAgt", length = 10)
private String txtLatestAgt;
@Column(name = "txtFamilyName", length = 30)
private String txtFamilyName;
@Column(name = "txtGivenName1", length = 35)
private String txtGivenName1;
@Column(name = "txtGivenName2", length = 35)
private String txtGivenName2;
@Column(name = "txtNickname", length = 100)
private String txtNickname;
@Column(name = "txtCreatedby", length = 12)
private String txtCreatedby;
@Column(name = "txtChangedby", length = 12)
private String txtChangedby;
@Column(name = "txtOffice", length = 12)
private String txtOffice;
@Column(name = "dteCreated")
@Temporal(TemporalType.TIMESTAMP)
private Date dteCreated;
@Column(name = "dteLastupd")
@Temporal(TemporalType.TIMESTAMP)
private Date dteLastupd;
@Column(name = "txtStatus", length = 10)
private String txtStatus;
@Lob
@Column(name = "binMark")
private byte[] binMark;
@Column(name = "txtType", length = 10)
private String txtType;
@Column(name = "txtFindphone", length = 20)
private String txtFindphone;
@Column(name = "txtFindpostCd", length = 10)
private String txtFindpostCd;
@Column(name = "dteExternupd")
@Temporal(TemporalType.TIMESTAMP)
private Date dteExternupd;
@Column(name = "txtSource", length = 10)
private String txtSource;
@Column(name = "txtID", length = 10)
private String txtID;
@Column(name = "txtEmail", length = 60)
private String txtEmail;
@Column(name = "txtURL", length = 60)
private String txtURL;
@Column(name = "txtSicCd", length = 10)
private String txtSicCd;
@Basic(optional = false)
@Column(name = "intStamp", nullable = false)
private int intStamp;
@Column(name = "txtClientkey", length = 12)
private String txtClientkey;
@Column(name = "txtExceptionCd", length = 10)
private String txtExceptionCd;
@Column(name = "txtScoregroup", length = 10)
private String txtScoregroup;
@Column(name = "txtImportanceRating", length = 10)
private String txtImportanceRating;
@Column(name = "txtTerritory", length = 10)
private String txtTerritory;
@Column(name = "txtRegno", length = 20)
private String txtRegno;
@Column(name = "dteIncorp")
@Temporal(TemporalType.TIMESTAMP)
private Date dteIncorp;
@Column(name = "txtIncorpCountry", length = 10)
private String txtIncorpCountry;
@Column(name = "txtSourceOrigin", length = 15)
private String txtSourceOrigin;
// @Basic(optional = false)
// @Lob
//@Column(name = "CustTimestamp", nullable = false)
// @Transient
// private byte[] custTimestamp;
@Column(name = "txtFullName", length = 100)
private String txtFullName;
@OneToMany(cascade = {CascadeType.PERSIST,CascadeType.REMOVE}, mappedBy = "fKcustomer")
private Collection<TblCustAddress> tblCustAddressCollection;
@OneToMany(cascade = CascadeType.PERSIST, mappedBy = "fKcustomer")
private Collection<TblCustContact> custContacts;
public Collection<TblCustContact> getCustContacts() {
return custContacts;
public void setCustContacts(Collection<TblCustContact> custContacts) {
this.custContacts = custContacts;
public TblCustomer() {
public TblCustomer(String pKcustomer) {
this.pKcustomer = pKcustomer;
public TblCustomer(String pKcustomer, String txtCustomerID, String txtLegacyID, int intStamp/*, byte[] custTimestamp*/) {
this.pKcustomer = pKcustomer;
this.txtCustomerID = txtCustomerID;
this.txtLegacyID = txtLegacyID;
this.intStamp = intStamp;
//this.custTimestamp = custTimestamp;
public String getPKcustomer() {
return pKcustomer;
public void setPKcustomer(String pKcustomer) {
this.pKcustomer = pKcustomer;
public String getFKcustomer() {
return fKcustomer;
public void setFKcustomer(String fKcustomer) {
this.fKcustomer = fKcustomer;
public String getFKcontact() {
return fKcontact;
public void setFKcontact(String fKcontact) {
this.fKcontact = fKcontact;
public String getFKaddress() {
return fKaddress;
public void setFKaddress(String fKaddress) {
this.fKaddress = fKaddress;
public String getTxtCustomerID() {
return txtCustomerID;
public void setTxtCustomerID(String txtCustomerID) {
this.txtCustomerID = txtCustomerID;
public String getTxtLegacyID() {
return txtLegacyID;
public void setTxtLegacyID(String txtLegacyID) {
this.txtLegacyID = txtLegacyID;
public String getTxtNationalID() {
return txtNationalID;
public void setTxtNationalID(String txtNationalID) {
this.txtNationalID = txtNationalID;
public String getTxtSSNID() {
return txtSSNID;
public void setTxtSSNID(String txtSSNID) {
this.txtSSNID = txtSSNID;
public Character getTxtSex() {
return txtSex;
public void setTxtSex(Character txtSex) {
this.txtSex = txtSex;
public Date getDteDOB() {
return dteDOB;
public void setDteDOB(Date dteDOB) {
this.dteDOB = dteDOB;
public String getTxtAgtCd() {
return txtAgtCd;
public void setTxtAgtCd(String txtAgtCd) {
this.txtAgtCd = txtAgtCd;
public String getTxtLatestAgt() {
return txtLatestAgt;
public void setTxtLatestAgt(String txtLatestAgt) {
this.txtLatestAgt = txtLatestAgt;
public String getTxtFamilyName() {
return txtFamilyName;
public void setTxtFamilyName(String txtFamilyName) {
this.txtFamilyName = txtFamilyName;
public String getTxtGivenName1() {
return txtGivenName1;
public void setTxtGivenName1(String txtGivenName1) {
this.txtGivenName1 = txtGivenName1;
public String getTxtGivenName2() {
return txtGivenName2;
public void setTxtGivenName2(String txtGivenName2) {
this.txtGivenName2 = txtGivenName2;
public String getTxtNickname() {
return txtNickname;
public void setTxtNickname(String txtNickname) {
this.txtNickname = txtNickname;
public String getTxtCreatedby() {
return txtCreatedby;
public void setTxtCreatedby(String txtCreatedby) {
this.txtCreatedby = txtCreatedby;
public String getTxtChangedby() {
return txtChangedby;
public void setTxtChangedby(String txtChangedby) {
this.txtChangedby = txtChangedby;
public String getTxtOffice() {
return txtOffice;
public void setTxtOffice(String txtOffice) {
this.txtOffice = txtOffice;
public Date getDteCreated() {
return dteCreated;
public void setDteCreated(Date dteCreated) {
this.dteCreated = dteCreated;
public Date getDteLastupd() {
return dteLastupd;
public void setDteLastupd(Date dteLastupd) {
this.dteLastupd = dteLastupd;
public String getTxtStatus() {
return txtStatus;
public void setTxtStatus(String txtStatus) {
this.txtStatus = txtStatus;
public byte[] getBinMark() {
return binMark;
public void setBinMark(byte[] binMark) {
this.binMark = binMark;
public String getTxtType() {
return txtType;
public void setTxtType(String txtType) {
this.txtType = txtType;
public String getTxtFindphone() {
return txtFindphone;
public void setTxtFindphone(String txtFindphone) {
this.txtFindphone = txtFindphone;
public String getTxtFindpostCd() {
return txtFindpostCd;
public void setTxtFindpostCd(String txtFindpostCd) {
this.txtFindpostCd = txtFindpostCd;
public Date getDteExternupd() {
return dteExternupd;
public void setDteExternupd(Date dteExternupd) {
this.dteExternupd = dteExternupd;
public String getTxtSource() {
return txtSource;
public void setTxtSource(String txtSource) {
this.txtSource = txtSource;
public String getTxtID() {
return txtID;
public void setTxtID(String txtID) {
this.txtID = txtID;
public String getTxtEmail() {
return txtEmail;
public void setTxtEmail(String txtEmail) {
this.txtEmail = txtEmail;
public String getTxtURL() {
return txtURL;
public void setTxtURL(String txtURL) {
this.txtURL = txtURL;
public String getTxtSicCd() {
return txtSicCd;
public void setTxtSicCd(String txtSicCd) {
this.txtSicCd = txtSicCd;
public int getIntStamp() {
return intStamp;
public void setIntStamp(int intStamp) {
this.intStamp = intStamp;
public String getTxtClientkey() {
return txtClientkey;
public void setTxtClientkey(String txtClientkey) {
this.txtClientkey = txtClientkey;
public String getTxtExceptionCd() {
return txtExceptionCd;
public void setTxtExceptionCd(String txtExceptionCd) {
this.txtExceptionCd = txtExceptionCd;
public String getTxtScoregroup() {
return txtScoregroup;
public void setTxtScoregroup(String txtScoregroup) {
this.txtScoregroup = txtScoregroup;
public String getTxtImportanceRating() {
return txtImportanceRating;
public void setTxtImportanceRating(String txtImportanceRating) {
this.txtImportanceRating = txtImportanceRating;
public String getTxtTerritory() {
return txtTerritory;
public void setTxtTerritory(String txtTerritory) {
this.txtTerritory = txtTerritory;
public String getTxtRegno() {
return txtRegno;
public void setTxtRegno(String txtRegno) {
this.txtRegno = txtRegno;
public Date getDteIncorp() {
return dteIncorp;
public void setDteIncorp(Date dteIncorp) {
this.dteIncorp = dteIncorp;
public String getTxtIncorpCountry() {
return txtIncorpCountry;
public void setTxtIncorpCountry(String txtIncorpCountry) {
this.txtIncorpCountry = txtIncorpCountry;
public String getTxtSourceOrigin() {
return txtSourceOrigin;
public void setTxtSourceOrigin(String txtSourceOrigin) {
this.txtSourceOrigin = txtSourceOrigin;
// public byte[] getCustTimestamp() {
// return custTimestamp;
// public void setCustTimestamp(byte[] custTimestamp) {
// this.custTimestamp = custTimestamp;
public String getTxtFullName() {
return txtFullName;
public void setTxtFullName(String txtFullName) {
this.txtFullName = txtFullName;
public Collection<TblCustAddress> getTblCustAddressCollection() {
return tblCustAddressCollection;
public void setTblCustAddressCollection(Collection<TblCustAddress> tblCustAddressCollection) {
this.tblCustAddressCollection = tblCustAddressCollection;
@Override
public int hashCode() {
int hash = 0;
hash += (pKcustomer != null ? pKcustomer.hashCode() : 0);
return hash;
@Override
public boolean equals(Object object) {
// TODO: Warning - this method won't work in the case the id fields are not set
if (!(object instanceof TblCustomer)) {
return false;
TblCustomer other = (TblCustomer) object;
if ((this.pKcustomer == null && other.pKcustomer != null) || (this.pKcustomer != null && !this.pKcustomer.equals(other.pKcustomer))) {
return false;
return true;
@Override
public String toString() {
return "com.test.jpa.TblCustomer[pKcustomer=" + pKcustomer + "]";
}

IBaseMessage.Context getting disposed for large message processing (There was a failure executing the receive pipeline: Reason: Cannot access a disposed object. Object name: 'MessageContext'.

Hi,
I am trying to parse a large message (2.7 MB file) in a custom Flat file Disassembler (inherited from the Microsoft.BizTalk.Component.FFDasmComp) this does exactly the same work for FFDasmComp but also promotes the count of disassembled messsages. This
works fine for small messages but for large messages I get this error
There was a failure executing the receive pipeline: "<pipeline name>, <Pipeline assembly>" Source: "Custom FlatFile Disassembler" Receive Port: "ReceivePort7" URI: "<the input file location>" Reason: Cannot access a disposed object.
Object name: 'MessageContext'.
In the event log
what I am doing inside the custom flat file assembly is, I am saving all the disassembled messages in a List<IBaseMessage> and then finally when GetNext() method returns null I am promoting the nRecordCount in the messageContext of all the disassembled
messages. This is where I get the error when trying to promote to the message context.(Cannot access a disposed object, Object name: 'MessageContext'). I think the messagecontext is getting disposed, but it should not as I still hold its reference in
the List<IBaseMEssage);
private long nRecordCount = 0;
private List<IBaseMessage> oDisassembledMessages = new List<IBaseMessage>();
Any idea why this happens ?
Thanks in advance, PLEASE HELP
Surya

Hi Surya,
Are you still facing this issue? and are you using Flat File Disassembler in your Receive pipeline?
If yes then set 'RecoverableInterchangeProcessing' to True.
Please have a look in below articles-
BizTalk
Pipeline - Flat File Disassembler Cannot Access a Disposed Object 'DataReader'
biztalk-esb-toolkitflat-file-debatching
BizTalk
Server: List of Errors and Warnings, Causes, and Solutions
This issue can also occur if you are using Large Size message, in this case you will have to optimize your code.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Cannot access a disposed object. Object Name : DataReader.

"Cannot access a disposed object. Object Name : DataReader."
This issue occurs when i use two custom pipeline component in the validate
stage of recv pipeline.
1)frst custom component is to validate the FF file (if i use this component alone everything works fine)
2)2nd custom component is to execute map in the pipeline after the frst component
Is there a soultion for this ?
Other than setting RecoverableInterchangingProcessing to "True" and adding pContext.ResourceTracker.AddResource(Stream) ??
Thanks
Ismail

It would be easy if you had your code copied here..
One thing I suspect and we normally forgot to do is to reset the position of the stream to the beginning when we go from one component to another, something like below:
yourStream.Position=0
or
yourStream.Seek(0, SeekOrigin.Begin);
(may be DataReader is yourStream in your case?)
This statement can be added at the last of your Execute method just before your return statement. "yourStream" is the stream variable associated with your message.
We need to re-position the stream before we read it again (when you get control to execute method, default position is 0). When you have more than one components, the message (IBaseMessage) then needs to be passed from one component to another and the current
position needs to be 0.
FYI: RecoverableInterchangingProcessing is to allows an interchange to be processed completely even if one or more messages in the interchange fail at the following stages/phases and ResourceTracker is used to manage the lifetime of the objects (e.g. you will
track those objects which you want to be disposed after execution of your component).
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Create directory / object name must NOT be case sensitive

SQL Dev. 2.1 - the wizard, chosen from the left side navigator, submits a wrong create statement in which the object name becomes case-sensitive. This should not be so! Even if you write the new object name in small letters , the object name must end up in the data dictionary with capitals. kind regards Inger ([email protected])

Which wizard? If I use a create table wizard, for example, and enter the table in lower case, this is indeed stored in the DB as upper case, as you require.
Please provide more detail for your problem.
Sue

Marking object names to be identified in fxg code

Similar Messages

Maybe you are looking for