MASS - How to user Form Routines in ProdSystem

Hi experts,
before we have done the upgrade from ECC 600 to ECC 605,
it was possible to enter abap form routines in transaction MASS also in productive system.
But now, this is function is locked. Therefore I found the note 1495539, which says, that we can't create form routines in productive systems.
But how can I use form routines now in productive systems?
Do I have to transport them? If yes
Thx in advance

Problem should be solved.
You can use TA MSTRVAR for transport of variants.

Similar Messages

" HOW TO WRITE FORM ROUTINES"

Hi all ,
I have a Query .. I have Developed a Smart form ( Delivery Challan ) .. My Functional Consultant asked me , If he Execute the T-code ( VL02N ). He should get the Print Preview of the Layout ...
I know it can be done through Form routines ..
Can one Explain me how to write the form routines ...

Hi ,
Copy the print program to custom program . Remove the routine " entry " . Write a selction screen with document number . put the read number to nast-OBJKY , V2 to NAST-KAPPL , sy-langu to nast-SPRAS in start of selection .Copy paste the code under the Entry routine .
hope it helps ...

Form routines in smartforms

how to use form routines in smartforms??..there is a option for using it in the global definition..plz explain the proper sequence of using it

Hi Arun,
In Form routines tab you enter routines that you want to use in the form via the program lines node. Within these form routines you cannot access any global data unless you explicitly pass them to the form routine interface.
i hope this will be helpfull to u,
Regards,
swapnil

Form Routine in User Exit

Hi
I would like to include a form routine in user exit inlcude ZXTXWU01 but I guess that is not possible, so I created a new include ZXTXWZZZ in which I have developed the code for the form routines...
But I still get the error in the main user exit ZXTXWU01 stating that the Form... End Form can be only after the End Function which obviously refers to the function module containing the main user exit..
Please let me know how to over come this ....

Hi,
You cannot create another Form...EndForm if the first include ZXTXWU01 is already inside a Form..Endform.
Meaning following structure is invalid:
             Form first_form.
                   Include zzzz
             Endform.
In Include zzzz.
     Form second_form.
     Endform.
Instead of a Form..Endform subroutine...directly have the statements in the Include program and remove the Form..Endform.
Regards,
Subramanian

How to disable a Entire row in a Matrix in Find Mode (User Form)

Hi,
How to disable a Entire row in a Matrix in Find Mode (User Form)
Regards
Jambu

Hi,
Iam using Bubble event = false in click event but the matrix row
is allow to edit but we cant save the document in Find Mode That is fine.
What is my actual requirement is In find mode matrix Row not allow to enter the data .
For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
save the document. Whwn i open the document in find mode the three row is not allow
to editable like the same functionality of PO, sales Order, etc ..
Regards
Jambu

How to Populate Database values in OIM user form

Hi friends,
I have created some groups in OIM and I have created a new field in OIM user form. Now i want the group values visible as new field values.
How the database table values can be made visible in OIM field ..?
please help me in doing it
Regards
sri

Just follow this document and from fig 13 select LOV type as query.
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conf_mangmnt.htm
Regards
Shashank

How to delete a Form Routine in Table Maintenance?

Hello,
Very Good Morning!
How to delete a Form Routine in Table Maintenance?
I had created a Form Routine at Environment>Modifcation>Events.
I want to delete a Form Routine that I had created. Can any one please explain me the way I can delete it.
Any suggestions are appreciated!
Thanks & Regards
Kittu

Hello Rudra,
Very Good morning!
I am in Environment>Modification>Events.
Here is had created a form routine ie...
01 From_entry Editor Icon
In Editor Icon we will write the code.
This will create a Include in the Function group.
I had already comented that Include from the Function group. I can even delete it. But, I want to delete the Form Routine that I had created....
01 From_entry Editor Icon
Can any one hepl me please...
Thanks & Regards,
Kittu

How to run process tasks in Xellerate User form sequentially

I have 2 tasks in the process definition of Xellerate User. One triggers on change in department and the other triggers on manager change. I want the manager task to trigger first and then the department task to run after the values have been updated in the former task. It so happens that always department task is getting triggered first.
I cannot have task dependency in Xellerate User form. I tried setting the response code in the manager task and have it generate department task. In this case the department task is triggered twice. First time it runs before the manager task. The second time since it is a task to run in the response code of manager task.
How to make each task run once and have it done sequentially?

Yes that was my first instinct but I need the old and new values of department and manager. That is possible when I make it a process task.
Heres what I want to do-
If there is a change in department of a user, send mail to manager with old and new department values.
If there is a change in manager when department changes, send mail to old and new manager with old and new department values.

How to create Lookup field in user form in OIM 11g - Urgent

Hi Experts,
How to create Lookup field in User Form - OIM 11g.
Pls. provide your support on priority.
Regards
Karan

Thanks all for your suggestion.
Our requirement, is we need to have a user defined field similar to how its there in "Organisation".
For example we need to create an user defined field like "Service Holding" which holds different services say like Service 1, Service 2, Service 3 etc.
Under each service there are multiple roles....
Eg:
Service 1 - Role 1, Role 2, Role 3
Service 2 - Role 4, Role 5
Service 3 - Role 6, Role 7, Role 8
Is there a way to store multi-valued attribute in OIM UDF? If so, pls. guide us
If its not possible we would need to create a Lookup field (something similar to Organization or Manager). User clicks on the button (lens button), which should invoke an API wherein he can select specific Roles and save in User. Eg. like Service 1 - Role 1#Service 2 # Role 5 and store in the backend database.
Is this possible. Pls. guide.
Regards,
Karan

How to add a new tab on modify user form

Hi,
In OIM11g, we can assign roles to a user using a tab named Roles in the modify user form. I want to add a new custom tab alongside all the already present tabs.
The new custom attribute functions the same as 'Roles' in OIM.
Does OIM11g provide any functionlity to do so?
Thanks..

Have you seen the 11g tutorial thing about adding a Custom ADF tabs in OIM Self Service Console at
http://apex.oracle.com/pls/apex/f?p=9830:37:3242381082783477::NO:RIR:IR_PRODUCT,IR_PRODUCT_SUITE,IR_PRODUCT_COMPONENT,IR_RELEASE,IR_TYPE,IRC_ROWFILTER,IR_FUNCTIONAL_CATEGORY:,,,OIM_11g,,,
Is that any help?
Also, more general advice on customising OIM 11g is available at:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm
Try metalink too because there may be examples of how to do stuff with OIM 11g there.
Good luck

How to retain users' Form Setting?

Hi Experts,
As subjected, I have setup UDF in categories and displayed in preferred sequence. I have also setup the Form Settings hiding and showing preferred fields and rearranging the sequence. I realize when I log in with the SAME User Id on a Different Workstation, the Form Settings I had setup doesnt seem to reflect according.
Please help me or guide me how I can retain users' Form Settings??
Thanks!
Chinho

Hi Dianne,
An SAP support briefed me that we should always use the FILE > EXIT function, because an inproper shutdown by click on the "x" by the window pane will mean that SAP may not have done a proper save and shutdown. And maybe this could affect the UDFs visibility and sequence that was already set on that PC.
Also, I have confirmed that the GENERAL > USERS > COPY FORM SETTINGS function, copies only the relabeling, UDFs category..etc onto another user, but it does not copy the visibility and sequence that was pre-set on another PC. When you try to login on another PC, you will simply need to reset the visibility and sequence of your UDF again on all modules.
Sad case.
Hope it helps!
Chinho

Help Pls: how to assign a user form to a non active sync resource adapter

I need to implement a non active sync resource adapter, such as oracle database or RACF. When a user is assigned a resource by IdM, an account is created on that resource. I want to transform some attributes during the creation, such as pre-padding the accountId with a letter and zeros. My questions are:
1) I think attribute transformation should be accomplished by user form. is it correct? How do I assign the user form to the non active sync resource?
2) What workflow/userform should I change to accomplish that?
Thanks a lot.

A cleaner option would be to
1. Create a custom form, which could be derived from the Tabbed User Form.
2. Create a delegated admin, with account administrator capabilities at the minimum, and required controlled organization, and assign the above form to this delegated admin -- this is on the same page.
3. Use this form to create IDs on the specific resource.
Now in this custom form you could have the logic on how to create the ID in the specific resource. In fact you could have different logic for different resource. Check the tech deployment guide for the exact syntax, but the field might be:
account[Res_Name].identity
Note that this setting would override the 'Identity Template' setting as defined in the RA configuration.
And BTW, it would really help if you readup the 'Forms' section in the guide.
Regards,
Suveer Chainani

How to handle form close event or escape key press event for user defined f

Experts,
Please let me know how to handle form close event or escape key press event for user defined form...
Thanks & Regards,
Pravin.

Hi
You can catch the form close event like this
If ((pVal.FormType = 139 And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE)) And (pVal.Before_Action = True)) Then
      Try
               SBO_Application.SetStatusBarMessage(pVal.EventType.ToString())
      Catch ex As Exception
                SBO_Application.SetStatusBarMessage(ex.Message)
        End Try
      End If
Hope this helps
Regards
Arun

From Forms Product Management - How many users can my Forms App run??

A question we often receive on the OTN list is how may users can
your Forms application cope with? - To help you plan and
understand how a Forms application scales, we have completed a
new white paper called "Oracle Forms Services Release 6i Capacity
Planning Guide". Please go to
http://otn.oracle.com/products/forms/pdf/6iscalability.pdf.
In this paper we discuss how you can load test your application,
how to design realistic scenarios and documents Oracle's own
scalability testing of Oracle Forms.
This paper is a valuable source of information for those decision
makers who need to deploy performant and scalable Forms
applications.
Regards
Grant Ronald
Forms Product Management

This is a very useful piece of information however the link
terminated with a period and a space which allow browsers to
display error page, to view this document remove the trailing
space and period or click the corrected link below.
Thanks you Oracle Forms Group!!!
http://otn.oracle.com/products/forms/pdf/6iscalability.pdf

How to avoid special charecters in create user form

Hi all,
I am new to Sun IDM.Please u people have to help me in giving the solution.
Actually,in create user form ,we have first name and last name text fields.These two fields accept any special charecters.I want these fields to accept only alphabets.Do i need to create new rule for it?Please tell me the steps to be done to allow only alphabetic charecters in this fields.Thanks in advance,
regards,
suresh

Hi,
I should thank for the quick response u have done.But,still my problem was not solved.I did wat u hav said in the last reply...Now iam getting "1" in that create user form.I have send the XML code of the "isAlpha" and "Firstname"..Please check whether i have done any mistake..waiting for ur reply.
<Rule name='isAlpha'>
<Description>Tests to see if testStr is comprised of only alpha characters.</Description>
<RuleArgument name='testStr' value='testStr'/>
<block>
<defvar name='testList'>
<appendAll>
<rule name='Alpha Numeric Rules:AlphaCapital'/>
<rule name='Alpha Numeric Rules:AlphaLower'/>
</appendAll>
</defvar>
<containsAll>
<ref>testList</ref>
<rule name='Alpha Numeric Rules:stringToChars'>
<argument name='testStr' value='$(testStr)'/>
</rule>
</containsAll>
</block>
</Rule>
<Field name='global.firstname'>
<Display class='Text'>
<Property name='title' value='_FM_FIRSTNAME'/>
<Property name='size' value='32'/>
<Property name='maxLength' value='128'/>
</Display>
<Validation>
<rule name='Alpha Numeric Rules:isAlpha'>
<argument name='global.firstname'/>
</rule>
</Validation>
</Field>

MASS - How to user Form Routines in ProdSystem

Similar Messages

Maybe you are looking for