Mass Transport v/s one-by-one

Hi Gurus,
I am upgrading about 120 roles in Dev and then I will have to move them to QAS, do you think I should do the transport one-by-one or mass transport will work just as fine.
<removed_by_moderator>
Edited by: Julius Bussche on Mar 12, 2008 9:53 AM

Hi Rohan,
Thats the purpose of mass transport
if there are too many roles, just push it in a single transport request.
Both work just fine!
Cheers!
Abhishek

Similar Messages

  • Error: ORA-16778: redo transport error for one or more databases

    Hi all
    I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
    Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
    but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
    Please help me how can i resolve this issue .Thanks in advance.
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect sys
    Password:
    Connected.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database
    show database
    ^
    Syntax error before or at "end-of-line"
    DGMGRL> remove configuration
    Warning: ORA-16620: one or more databases could not be contacted for a delete operation
    Removed configuration
    DGMGRL> exit
    [oracle@PRIM ~]$ connect sys/sys@prim as sysdba
    bash: connect: command not found
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 08-OCT-2006 19:52:48
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PRIM_DGMGRLL" has 1 instance(s).
    Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect /
    Connected.
    DGMGRL> create configuration test as
    primary database is PRIM
    connect identifier is PRIM
    ;Configuration "test" created with primary database "prim"
    DGMGRL> add database STAN as
    connect identifier is STAN
    maintained as physical;Database "stan" added
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: NO
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    DISABLED
    DGMGRL> enable configuration
    Enabled.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database verbose prim
    Database
    Name: prim
    Role: PRIMARY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    PRIM
    Properties:
    InitialConnectIdentifier = 'prim'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'PRIM'
    SidName = 'PRIM'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "prim":
    Error: ORA-16778: redo transport error for one or more databases
    DGMGRL> show database verbose stan
    Database
    Name: stan
    Role: PHYSICAL STANDBY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    STAN
    Properties:
    InitialConnectIdentifier = 'stan'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'STAND'
    SidName = 'STAN'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    DGMGRL>

    This:
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    says that your network setup is not correct. You need to resolve that first.
    As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
    It's 3 DGMGRL commands so I am not sure what 'steps' you need?
    Larry

  • How can I transport data from one client to another client?

    How can I transport data from one client to another client? 
    Regards,
    Subho

    hmmm, CTS = cutomizing transport?
    If you have a customizing table, there are still two possibilities.
    1. customize in DEV system and transport
    2. customize right there where you need it.
    this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

  • Hi,how can i transport objects from one server to other like (Dev To Qty)

    Hi Sir/madam,
       Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
    Regards,
    Vishali.

    Hi Vishali,
    Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
    Step 2: Release the subrequests first and then the main request by pressing Truck button
    Step 3: STMS or Customized transactions
    Object Collection In Transports:
    The respective Transports should have the following objects:
    1. Base Objects -
    a. Info Area
    b. Info object catalogs
    c. Info Objects
    2. Info Providers u2013
    a. Info Cubes
    b. Multi Providers
    c. Info Sets
    d. Data Store Objects
    e. Info Cube Aggregates
    3. Transfer Rules u2013
    a. Application Components
    b. Communication Structure
    c. Data Source replica
    d. Info Packages
    e. Transfer Rules
    f. Transformations
    g. Info Source Transaction data
    h. Transfer Structure
    i. Data sources (Active version)
    j. Routines & BW Formulas used in the Transfer routines
    k. Extract Structures
    l. (Note) If the transfer structures and related objects are being transferred without preceding
    Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
    Objects as well.
    4. Update Rules u2013
    a. Update rules
    b. Routines and formulas used in Update rules
    c. DTPs
    5. Process Chains u2013
    a. Process Chains
    b. Process Chain Starter
    c. Process Variants
    d. Event u2013 Administration Chains
    6. Report Objects u2013
    a. Reports
    b. Report Objects
    c. Web Templates
    Regards,
    Suman

  • How to transport data from one tab to another(mapinfo)?

    Hello all,
    due to a change of design i have to transport datas from one
    spatial table to another in order to use them in mapinfo.
    How can i handle this with polygon datas?
    if i just do a simple "insert into tab select * from anothertab;
    all std datas are moved but the spatials generate errors while
    opening in mapinfo (illegal data type) any ideas or suggestions?
    Thanks i advance,
    Volker I. Lipper

    Hi,
    just a guess - maybe the necessary metadata is missing. I suggest
    you check the MAPINFO.MAPINFO_MAPCATALOG table for the
    appropriate entry (for "anothertab"). If there is no
    corresponding row, you need to make the table mappable in Mapinfo
    Pro first.
    Hope this helps,
    --- Hans.

  • Transporting Screen from one Server to another

    Hi Everyone,
    I have developed one program ( containing several Screens )as local object and I want to transport it from one server to another server without creating Transport Request. Please Help regarding the same.

    hi,
    You need to assign the program with screens to a development class and create a transport request for the same. Without a transport request, its not possible to transport from one server to another.

  • Transportation ( how to transport objects from one server to another)

    Hi BW guru's
    Please tell me the steps to transport objects from one server to another server.

    Follow the steps.
    1. RSA1 > Transport connection
    2. In the right window there is a catagory "all object according to type"
    3. Select required object you want to transport.
    4. Expand that object , there is select object, double click on this you will get the number of objects, select yours one.
    5. Continue.
    6. Go with the selection, select all your required objects you want to transport.
    7. There is icon Transport Object (Truck Symbol).
    8. Click that, it will creat one request, note it down this request.
    9. Go to Transport Organiser (T.code SE01).
    10. in the display tab, enter the Request, then go with display.
    11. Check your transport request whether contains the required objects or not, if not go with edit, if yes "Release" that request.
    Thats it, your cordinator will move this request to Quality or Production.
    Hope its helps.
    Regards

  • How to transport objects from one server to another server?

    How to transport objects from one server to another server.ie..from development to testing sewrver....

    Hi Manoj,
    Check these links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    Transporting Objects IR ID using CMS
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
    You can choose either File transfer methor or CMS. File transfer method is the simplest.
    Sachin

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • Transporting Transport Request from One System to other

    Hi All,
    I want to create tranport request from ECC 5.0 System to ECC 6.0 system.
    Please let me know steps for creating transport request and transporting transport request from one system to other system.
    Thanks in advance.
    Best Regds,
    zubera

    Hi,
    You cannot transport request from ECC5.0 to ECC6.0.
    Instead follow this:
    <b>In ECC5.0</b>
    Include all the objects into a transport request & provide the transport request no. to BASIS.
    BASIS team will create 2 files for you based on the transport request no.
    <b>in ECC6.0</b>
    Provide the 2 files to BASIS Team & ask them to import them.
    The objects would be available in ECC6.0
    Best regards,
    Prashant

  • Error: ORA-16778: redo transport error for one or more databases.   please help.

    Hello everyone :
    I can't switchover to primary. following is error and information.
    RHEL 6.3 x86-64
    Oracle database 11.2.0.3.0 Enterprise edition
    Primary database = orclprmy
    Standby database = orclstby1
    ##### /etc/hosts on orclstby1
    [root@orclstby1 admin]# cat /etc/hosts
    127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    192.168.50.211    ttprmy
    192.168.50.212    orclstby1
    ### DG broker error
    DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
    Copyright (c) 2000, 2009, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    Connected.
    DGMGRL> show configuration;
    Configuration - TTDGConfig1
      Protection Mode: MaxPerformance
      Databases:
        orclstby1 - Primary database
          Error: ORA-16778: redo transport error for one or more databases
        orclprmy  - Physical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    ERROR
    DGMGRL>
    ########### listener.ora on orclstby1
    [root@orclstby1 admin]# cat listener.ora
    # listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME=orcl)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1_DGMGRL)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    ADR_BASE_LISTENER = /u2/oracle
    ############## tnsnames.ora on orclstby1
    ORCL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
    orclprmy =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
    orclprmy_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
    orclstby1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
    orclstby1_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
    ##### alert log on orclstby1.
    Fatal NI connect error 12504, connecting to:
    (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
      VERSION INFORMATION:
            TNS for Linux: Version 11.2.0.3.0 - Production
            TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
      Time: 06-SEP-2013 13:19:55
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
    TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    There is problem  in alert log.
    In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
    Is any idea?
    Thanks for help.
    消息编辑者为：user4914135

    #### on primary database
    SQL>  select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
    LOG_ARCHIVE_DEST_2   VALID     REMOTE  LGWR       PENDING  ALL_LOGFILES    PRIMARY_ROLE orclstby1
    LOG_ARCHIVE_DEST_3   INACTIVE  LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
    #### on standby database
    SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
    LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING  ONLINE_LOGFILE  PRIMARY_ROLE orclprmy
    ORA-12504: TNS:listener was not given the SERVICE_NAME in
    CONNECT_DATA
    LOG_ARCHIVE_DEST_3   INACTIVE  PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE 
    ####  log_archive_dest on primary database  
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclprmy
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                     NOAFFIRM delay=0 optional comp
                                                     ression=disable max_failure=0
                                                     max_connections=1 reopen=300 d
                                                     b_unique_name="orclstby1" net_ti
                                                     meout=30, valid_for=(all_logfi
                                                     les,primary_role)
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    ####  log_archive_dest on standby database
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclstby1
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                     =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                      db_unique_name=orclprmy
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    log_archive_dest_23                  string
    log_archive_dest_24                  string
    log_archive_dest_25                  string
    #### spfile on standby database
    </u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
    orcl.__db_cache_size=1040187392
    orclstby1.__db_cache_size=1090519040
    orcl.__java_pool_size=16777216
    orclstby1.__java_pool_size=16777216
    orcl.__large_pool_size=16777216
    orclstby1.__large_pool_size=16777216
    orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=536870912
    orclstby1.__pga_aggregate_target=536870912
    orcl.__sga_target=1610612736
    orclstby1.__sga_target=161061273
    orcl.__shared_io_pool_size=0
    orclstby1.__shared_io_pool_size=0
    orcl.__shared_pool_size=503316480
    orclstby1.__shared_pool_size=469762048
    orcl.__streams_pool_size=16777216
    orclstby1.__streams_pool_size=0
    *.archive_lag_target=0
    *.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_nam
    e_convert='orcl','orclstby1'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
    *.db_recovery_file_dest_size=5218762752
    *.db_unique_name='orclstby1'
    *.deferred_segment_creation=FALSE
    *.dg_broker_start=TRUE
    *.diagnostic_dest='/u2/oracle'
    *.fal_client='orclstby1'
    *.fal_server='orclprmy'
    *.log_archive_config='dg_config=(orclprmy,orclstby1)'
    *.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
    *.log_archive_dest_2='ser
    vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
    *.log_archive_dest_state_2='ENABLE'
    orcl.log_archive_format='orcl_%t_%s_%r.arc'
    *.log_archive_format='orclstby1_%t_%s_%r.arc'
    orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
    *.log_archive_max_processes=4
    *.log_archive_min_succeed_dest=1
    orcl.log_archive_trace=0
    orclstby1.log_archive_trace=0
    *.log_file_name_convert='orcl','orclstby1'
    *.open_cursors=300
    *.pga_aggregate_target=536870912
    *.processes=
    1500
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=1655
    *.sga_target=1610612736
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    </u2/oracle/product/11.2.0/dbhome_1/dbs>
    Thank you for your help.

  • How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

    How to install and configure ms exchange server 2007 both role hub and edge transport role in one network 

    Hi,
    Edge role is design for perimeter networks, to keep security risks minimum.  So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
    If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
    Thanks.
    MachPanel - Premium Cloud Automation Solution

  • Move transport requests from one landscape to another

    HI Gurus,
       I am facing a situation where i need to import the Transport Request from one landscape to another.
        Consider i have two  landscapes DE1 TE1 PE1  and  DE2 TE2 PR2. and both the landscapes are on
        different release.
         I have created a Transport Request DE1Kxxxxxx.
         And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
       How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
    Please guide me.
    Thanks in Advance,
    Sachin Kumar.

    Hi,
    Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
    warm regards
    Harish K Reddy

  • Is there a way to do a mass contacts drop from one mac to another mac?

    Is there a way to do a mass contacts drop from one mac to another? I've been trying to find our how to do one without any sucess other than airdropping them one at a time and that's not productive.

    Welcome to the Apple community Confousticated.
    Show all contacts, select the first in the list, shift-click the last in the list (this selects them all) drag to your desktop, transfer the file to the other Mac and double click it.

  • Error when mass transporting roles

    Hello,
    I'm trying to mass transport all of our Z roles from one CRM system to another that's not in the same transport path and am receiving a "Unexpected EOF after ' ' bytes" error on import. The transport had about 60 pfcg roles in it. I then created a new transport with about 15 roles and receieved the same error. I then made another transport with a couple roles and it was fine. My question is how can I move all of my roles without having to do a few at a time. Is it possible? I'm not moving the generate profile or user assignment.
    Thank you,
    Alex

    Hi Alex,
    "Unexpected EOF after ' ' bytes"
    Please get in touch with Basis team and get the tp size checked. It seems the size limit of tp has exhausted. By increasing its size this issue might get resolved. Let us know if you need any more information from our side.

Maybe you are looking for