Master data activation by process chain

hello all,
As I have seen that we have to right mouse click and activate master data after loading so that we can report on it. Thats a essentila step right?
How can we achieve that in process chain, when we run infopackage to load master data do we add some other variant to activate that data ?
Thanks in advance

Hi Raj,
yes we can acheive this using process chains, create a variant on this , in the process chains screen on the left side, u can see "ATTRIBUTE CHANGE RUN" in "OTHER BW PROCESS"
Regards
Vijay

Similar Messages

  • Best Practices for Loading Master Data via a Process Chain

    Currently, we load attributes, text, and hierarchies before loading the transactional data.  We have one meta chain.  To load the master data it is taking more than 2 hours.  Most of the master data is full loads.  We've noticed that a lot of the master data, especially text, has not changed or changed very little since we implemented 18 months ago.  Is there a precedence or best practice to follow such as do we remove these processes from the chain?  If so, how often should it be run?  We would really like to reduce the amount of the master data loading time.  Is there any documentation that I can refer to?  What are other organizations doing to reduce the amount of time to load master data?
    Thanks!
    Debby

    Hi Debby,
    I assume you're loading Master Data from a BI system? The forum here are related to SAP NetWeaver MDM, so maybe you should ask this question in a BI forum?
    Nevertheless, if your data isn't changed this much, maybe you could use a delta mechanism for extraction? This would send only the changed records and not all the unchanged all the time. But this depends on your master data and of course on your extractors.
    Cheers
    Michael

  • Master Data daily Load Process Chain Error..

    Hi All,
      I have a process chain which is used to extract master data for 6 infoobjects ,all the Attribute data is delta and all the Text Data is full , now my proess chain suddenly failed on 9/09/2010 and from that day even when i try 'Repeat'  the Start process is fine but the next process starts and then goes to 'RED' when i checked the error i saw the error message as 'Requesting the last delta for master data is not supported' . Can anyone help me with how to rectify this process chain when i check the IDocs i am seeing a error 'Code page not found' and also an error 'Update mode R is not supported by the extraction API'
    Can someone help please ...
    Thanks In Advance...

    Make sure your last delta was sussessfull or not?
    If not change the status of the failed load to red and try to reinti the load.
    This problem occurs when we tried to request repeat delta for master data extractors, For Master data datasources delta updated based on ALE Change pointers. So Repeat can't be done if any delta load ended with error.
    YOu need to reinitalize.
    For more detials plz check the below link
    http://wiki.sdn.sap.com/wiki/display/BI/UpdatemodeRisnot+supported
    Regards
    KP
    Edited by: prashanthk on Sep 13, 2010 3:53 PM

  • Master Data Loading in Process Chain

    Hello All
    I want to design process chain for Master data loading we have 8 modules in our project such as SD,MM,FI,CO,PP,QM,PM and LO how Design PC .Each Module one start varient and All Text,Attribaute and hierarchies  Loading parallel ofter one Attribute Change run this Approach is Right Please guide me
    and Module dependence are there ?
    Like First load SD then MM like please guide me
    Regards,
    Ravi

    Hi.......
    Welcome to SDN.........
    It is also possible to load like this:
    load attributes
    change run load texts in parallel
    because chnage run and texts don't disturb each other.
    If you want also to load hierarchies the following order is recommended:
    load attributes
    load hierarchies
    changerun
    texts at last or in parallel with changerun.
    And for loading diiffterent area...........first tell me which architecture you are using..........split or LSA........
    as per ur update u didnt mentioned the type of architecture wheather it split,or,LSA or some other thing which u are useing,
    if you use Split architecture the load ,GD,DP,FC from FC completion of master data COPA will start so Complusary load FC first ,,u can run simulateanously (GD,DP,FC)it will be no problemand have to cross check about configuration of ur server also ,later you can start pp,tp in case of HR it will be total independent so check when u want to load
    IN Case of LSA (layerd Scaleable architecture) first laod Masterdata .. which will same for all the Process areas (like 0costcenetr,0employee) later start the Trancation data which you feel which is important as per my knowledege go for FC in turn COPA because usually reports morely based on FC and COPA
    Hope this helps......
    Thanks==Points as per SDN........;)
    Regards,
    Debjani..........
    Edited by: Debjani  Mukherjee on Oct 22, 2008 4:03 PM

  • Deleting master data in a process chain via ABAP "RSDMD_DEL_BACKGROUND" ?

    I need to delete master data attributes in a process chain.
    Since there seems to be no predefined process type for this, I looked for an existing ABAP in the dictionary and found the ABAP report "RSDMD_DEL_BACKGROUND". I plan to call this ABAP in an ABAP-process-step in my process chain.
    Unfortunately, I'm not shure how to set the input parameters:
    report rsdmd_del_background .
    type-pools: rsd, rrsi, rsenq.
    parameters: p_iobjnm like rsdiobj-iobjnm obligatory,
                p_chabnm type rsd_s_cha_bas-chabasnm obligatory,
                p_delsid type rs_bool default 'X',
                p_deltxt type rs_bool,
                p_obj    like balhdri-object,
                p_sub    like balhdri-subobject,
                p_ext    like balhdri-extnumber,
                p_noprot type rs_bool.
    Can anybody help me, with the settings needed or point out another way to achieve the deletion of master data attributes in a process chain?
    Thanks in advance, Frank.

    Hi Frank,
    as I already suggested in a previous thread, try to look at the FM 'RSDMD_DEL_MASTER_DATA'(in the pgm LRSDMDU12)...but pay attention to the other elements that the system certainly checks in order to complete this type of process !
    Hope it helps.
    Bye,
    Roberto

  • Needs to delete one Master Data from main process chain in development syst

    Hi All,
    Can any one pls suggest how we can delete the master data load from main process chain in development system.
    In the main process chain nearly i am having 52 master data loads in that i required to delete one master data.
    Thnanks in Advance.
    karuna.

    Hi...
    1) go to RSPC1
    2) Give the technical name of the process chain
    3) in the top where we write tcode....there write COPY..and press enter...
    4) then remove the start process and the desired master data loads..
    5) create a new start process with a new variant..if you want to put ant condition you can put it there...
    6) then link the start process with the first process..
    7) activate your process chain...and schedule it as per your require...you can make it immediate run or can scedule it for a particular time...
    Or if you don't want to create anew process chain...then go to the design view of the PC and remove the desired load and again activate it...
    Hope this helps you...
    Regards,
    Debjani...
    Edited by: Debjani  Mukherjee on Sep 4, 2008 4:35 PM

  • DSO activation in Process Chains - takes long time

    Dear All,
    We have included DSO activation in Process Chains. This process takes a long time to execute. We manually cancel the corresponding process in Process Overview and repeat it from chain. The chain runs daily and this issue also occurs on a daily basis.
    Does anyone one of you have an idea of how to deal with this performance issue?
    Regards.

    Figure out in which class does your process fall in:
    Class A- High Priority
    Class B- Medium Priority
    Class C- Least Priority
    Background processes
    Class A jobs
    The number of work processes reserved for job class A is a subset of the number of background processes.
    You should only reserve work processes for job class A if it makes sense within your system organization. Work processes reserved for class A jobs are no longer available for job classes B or C.
    Set parallel processing for a specific BW process in the (variant) maintenance of the process
    Call the function for setting the parallel processes.
    You can call the function in the process variant maintenance of a process chain or in the process maintenance. The function call varies for the different BW processes.
    For example, in the data transfer process you call the function with Goto-->  Background Manager Settings.
    The Settings for Parallel Processing dialog box appears
      Under Number of Processes, define the maximum number of work processes that should be used to process the BW process.
    If you enter 1, the BW process is processed serially.
    If you enter a number greater than 1, the BW process is processed in parallel
    In the Parallel Processing group frame, make the relevant settings for parallel processing in the background:
    Enter a job class for defining the job priority.
    The job priority defines how the jobs are distributed among the available background work processes
      In the group frame Parallel Processing, you can define whether parallel processing should take place in dialog work processes or in background work processes for the processes ODSACTIVAT, ODSSID and ODSREQUDEL for the DataStore object
    Transport:
    The entries in tables RSBATCHPARALLEL and RSBATCHSERVER are written on a transport request of the Change and Transport System.
    Edited by: ram.pch on Oct 7, 2011 9:55 PM

  • Attribute Change Run VS Master data activation

    hello guys
    I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
    Thanks and Regards
    S

    Hi S,
        Although they seem to be the same there are differences.
    Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
    Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
    When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
    ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
    The 2nd function, is that it realligns the aggregates for the changed attributes
    let me give you an example.
    You have an aggregate based on material group which is an aggregate of material.
    Consider that you have a material X which initial belonged to group A.
    The aggregate would look like this
    Material Material Group Keyfigure
    X                  A                      100
    Now you change the material group of the same material as B
    The aggregate would not change automatically....ie it would still be X A 100
    To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
    X B 100
    Hope this helps.
    Regards.

  • Abt master data activation and attribute change run

    There is any difference between master data activation and attribute change run

    Hi,
    Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
    Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
    For attribute change run we have direct tcode: RSATTR or  In the main menu, choose the path Tools Hierarchy/Attribute Change.
    regards
    KP

  • Process Chain Master Data Failed.Showing Entire chain has status R

    Hi,
    Everyday SDMasterChain is running successfully.
    Today one of the localChain or subchain  has failed.
    I have noticed that it has failed because last delta for one infoPackage has not yet completed and chain showing status "Entire chain now has status 'R'"
    Can anybody resolve the issue?
    Below is te log for the error.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000113991, user ID ALEREMOTE)
    Last delta upload not yet completed. Cancel
    Data saved successfully
    Start InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2
    Last delta upload not yet completed. Cancel
    Last delta upload not yet completed. Cancel
    InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 created request
    Request REQU_449HFL0OFD22BSU2GX1X2MJJJ could not be generated with InfoPackage REQU_449HFL0OFD22BSU2GX1X2MJJJ without errors
    Last delta upload not yet completed. Cancel
    Error After Starting InfoPackage ZPAK_3VB5JI5I0N6QJ7RFSFU7Z3PF2 in Process Chain
    Entire chain now has status 'R'
    Process Attribute Change Run, variant Compounding Object has status Undefined (instance )
    Process Save Hierarchy, variant Generated from LOADING ZPAK_3VBSFASA7NWCNP1JX9WXI5 has status Undefined (instance )
    Process Execute InfoPackage, variant 0CUST_SALES_ATTR - Full has status Undefined (instance )
    Process Execute InfoPackage, variant 0CUST_SALES_TEXT has status Undefined (instance )
    Process Execute InfoPackage, variant 0CUST_SALES_TID_LKDH_HIER has status Undefined (instance )
    Process Execute InfoPackage, variant ZMAT_SALET - TEXT has status Undefined (instance )
    Process Start Process, variant Bekaert Master Data Loads - Start Variant has status Undefined (instance 449HEDPDI8N6AP5XKDUODJS6N)
    Process Execute InfoPackage, variant Load from 0MAT_SALES_ATTR into ZMAT_SALE has status Undefined (instance REQU_449HB4K9K3W7GPJEF52YM83N3)
    Process Execute InfoPackage, variant Load from 0MAT_SALES_TEXT into ZMAT_SALE has status Undefined (instance REQU_449HJOO6322QV09OL73P18ODR)
    Process Execute InfoPackage, variant ZMAT_SALEM -  ATTR - FULL has status Undefined (instance REQU_449HEJW4S44QAUTY9LQKH4QY7)
    Process Execute InfoPackage, variant Delta load from 0MAT_PLANT_ATTR into 0MAT_PLANT has status Undefined (instance REQU_449HFL0OFD22BSU2GX1X2MJJJ)
    Termination of chain has been reported to meta chain 449CKM1O64AHRLQJLNZ2GBWQ7
    Message sent successfully
    Job finished
    Rgds,
    CV.

    Hi,
    There are times when Master Data load compel us to do Re-Init. I guess you need a Re-Init.
    Check theses links:
    1: Re: Update mode R is not supported by the extraction API
    2: pl help me with repeat delta for text info object
    Regards
    Happy Tony

  • Master Data Activation

    Hi All,
    I have to activate a Master Data. When i use the path > select MD & right click & Activate MD, it displays a message that:
    " The master data cannot be activated directly since attributes of the characteristic MD are used in aggregates
    Start the change run via Admin. Workbench->Tools->Apply Hierarchy/Attribute Change, to activate the master data "
    When i use the path Admin. Workbench->Tools->Apply Hierarchy/Attribute Change to activate the MD, it again gives me the following message:
    " Hierarchy/Attribute change canceled (protocol/short dump) ".
    I am not able to analyze the problem. Kindly treat it as urgent.
    Best Regards,

    Hi Salil Bhaskar,
              Just De Activate the Aggregates for Some time, create a Process chain for following tasks,
    1) Deactivating the Aggregates.
    2) Schedulling the Master Data Attributes and Master Data.
    3) Activate the master Data.
    4) Schdulling the Transactional Data through Info package.
    5) Activating the Aggregates
    Assign the Points if Helpful.
    Regards,
    Rajdeep.

  • How to load data targets through process chain

    hello gurus,
    i am new to bi7.0 environment,
    can anyone provide me step by step loading of data targets with the help of process chains.
    its very urgent
    thanks in advance
    bharath kumar

    Hi,
    After creating Start variant, select Data Targets in left side, find out which one you want to create PC. Drag and drop that Data Target ODS into right side, and select info package and ods activation.
    For Master data also the same you have select Attr Change run.
    Connect the links from Start variant to data targets.
    Check the below links:
    http://help.sap.com/saphelp_bw33/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/dc/c7e542de327276e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
    Business Intelligence Old Forum (Read Only Archive)
    Reg
    Pra

  • How to manage the "no data" loading in process chain

    Hi,
    I want to load some master data in delta mode with a process chain. The treatment works good except in one case.
    If I have no data selected during the extraction ( cause the system doesn't find any data matching with the delta field ), the process chain appears in red as if some problems was encountered instead of giving a traffic light green.
    How is it possible to manage this case of treatment as a normal treatment ?
    Thanks for your help.

    Marc,
    in RSMO ,
    Using Settings -> Evaluation of Requests ->
    if no data is available in the system, the request
    select Green (is Judged to be successful). this will cause the load to be successful if Zero records are fetched and the Process chain will not fail.
    Cheers
    Tushar

  • DSO cannot be activated when process chain is launched from BPC

    Hello,
    we are facing the following issue in our project: we have created a process chain that loads transactional data into a DSO and then a BW cube. From there we will be launching the data into BPC.
    The process chain that we have built is working and loading OK when this chain is launched from the RSPC trx. However, when launched via the datapakage "Execute Process Chain in BW" data are loading OK from the source system up to the DSO, but the activation does not take place.
    The error that we are getting on the BPC data package is:"An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occurred, but was neither handled locally, nor declared in a RAISING clause
    Call of the method IF_RSPC_GET_PARALLELIZATION is SINCHRONOUS of the class CL_RSPC_CHAIN failed; the obligatory parameter I_VARIANT has not been filled."
    Has anyone faced this issue before? could you please help on this topic? I have tried several options and all of them are pointing to the parameter I_VARIANT.
    Thanks in advance.
    Kind regards,
    Begonia

    Hi Reddy,
    I've deleted deltas load from DOS, then I launched and activated a repair full load from ECC, it worked well.
    After that I went for delta load so the load was OK but the activation failed.
    The message 'Type of data update' was: Repeat of the last delta and the Nº of Transferred and Added was zero.
    ¿Do you think I could solve the problem if I do a repair full load from ECC then I delete the Delta init and create a new Delta init?
    Any another idea?
    In conclusion I'm not yet solved the problem so advices are welcome.
    Regards,
    Jorge

  • Error in ODS activation in process chain

    I am getting errors when activating request using process chains.
    Error message is Message No. RSM1102.
    Please suggest if any notes apply for this.
    Regards,
    Nitin

    Hi,
    This happens when data is not acceptable to ODS  definition. Data need to be corrected in PSA.
    Check  for Infoobject which has caused this problem in the monitor details tabstrip. Delete request from datatarget after changing QM status to red. Correct data in PSA and update data back to datatarget from PSA.
    Cheers
    Raj

Maybe you are looking for