Master data infopack assignment to Transactional Info source

Hi all,
I have been using Standard content cubes and ODS. What i observed was that, i see the master data infopacks under the transactional info source. Some infosources are feeding the Info objects, whereas some of them are feeding some Masterdata ODS. As i never came across such scenario, i was confused. Did any of you, came across such assignment for the infosources? Any insight on this issue would be helpful.
Note: All the infosources used are out-of-box.
Thanks in Advance,
Mav.

Hi Maverick,
Are you referring to flexible update of master data as it's possible from BW 3.x to load master data into an ODS object.
Check the link below ->
http://help.sap.com/saphelp_bw31/helpdata/en/98/3a14836fe5e1499a4e17d2d45f4612/content.htm
Hope it helps,
Sree

Similar Messages

  • Can V find Master data datasource by having Transaction data datasource?

    Hello All
    I have a datasource in r/3 side by this can v find Master data datasource?
    The Transaction datasource is 2lis_02_scl?
    how to find Master datasource for this?
    Many Thanks
    balaji

    AHP hello
    Thanks for info given
    Can v view same for customized datasources also?
    is it possible?
    so for datasource 2lis_11_vaitm,if v click on "Infosource Overview" v can view all the Infosource name,by this v can find our Master Datasource.?
    so for ex.,I can c infosource 0CUST_GRP1,so this is the datasource for Master data from r/3 side?
    Is it correct?
    Many Thanks
    balaji

  • Master Data is not appearing in Info Object

    Hi Experts,
    I have loaded text data from data source 0WS_QUEST_TEXT to info object 0WS_QUEST. While running DTP, Load monitor displays 12 records are added to info object.
    Also while activating master data it gives error: "Master data for characteristic 0WS_QUEST already active"
    When i select Display Data option by right clicking on Info Object 0WS_QUEST, no data is displayed.
    Please let me know whether I am missing any step while loading master data.
    Please note that info package has already run and data is there in PSA.
    Thanks in advance
    Regards,
    Niranjan

    Hi,
    Just go to Infoobject and right click and select option maintain master data.
    Don't put any value and just execute.since there are only 12 records,it should show all the records .
    You can also check text table data by getting inside that object directly or through SE11/SE16 option.
    When the records are activated ,it will not activate it again,so it is not error,its just a message.
    Let me know if u have any further doubts.
    Thanks and regards
    Kiran

  • How To... Update Master Data during upload of transaction data

    Can anybody let me know how this can be achieved.
    I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
    I dont want separate datasources.
    The datasource is actually transactional datasource.
    I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
    I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
    How To... Update Master Data during upload of transaction data
    Thanks.

    Dear Praveen
    I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
    In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
    I got the below link which may be helpful
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8

  • Error in master data load in time dependent info object

    hi,
    while loading master data(Texts) to time dependent info object i am getting error like      <b>"INFODEP1 : Data record 8 ('00000512 ') : Invalid "to" date '1-2-2004 '</b>     
    can anyone help where exactly is the error and how to remove it.
    Thanks
    Ashish

    hi,
      the date format should be yyyymmdd.
    regards
    pls assign points if helpful.

  • Why we load Master data first before loading Transaction data

    Hi Experts,
    why we load Master data first before loading Transaction data, specify any reasons for that ? Is it mandatory to load MD first ?
    I will allocate points to those who help me in detail. My advance thanks who respond to my query.
    Edited by: Nagireddy Pothireddy on Mar 10, 2008 8:17 AM

    Hi Nagireddy,
    I hope this helps....
    The bottom line for building cubes it to view facts against dimensions. When i say facts these are the key-figures i.e sales volume, Sales vat etc against some characteristics like sales Area,  Cost center , plant.
    Basically charateristics are those against which key-figures are measures like Costcenter, plant, material etc.
         Dimensions are a grouping of related characteristic. So basically a cube has a central fact table with dimesions associated to it in a relational schema. Imagine now you want to view a key figure Sales Volume against a dimension plant. when you consider plant , it has a distribution channel, purchasing organisation , company code, sales area, region etc associated with it. So which form the attributes of plant and also have some or the other description (texts) and aslo hierarchy. first we load the master data and then the transaction data follows.

  • Changing master data record while loading Transaction data

    Hello All,
    We have a requirementt to change one of the master data field(FLAG) while loading on the transaction data.
    we get the material info in the Master data. and in the sales order item data also we get the material.
    While loading the Transaction data, I have to set a FLAG field has "s" in the Master data material based on the Key selection:
    Master data -  MAterial = Tramsaction - Data Material.
    I have written the code.. and implemented.. i get the correct records but i face huge performance issue. can any one guide me please
        DATA: itab1 TYPE STANDARD TABLE OF /bi0/pmaterial,
               wa_itab1 TYPE /bi0/pmaterial,
               w_tabix TYPE sy-tabix.
         IF itab1 IS INITIAL.
           SELECT * FROM /bi0/pmaterialINTO TABLE itab1.
         ENDIF.
         LOOP AT result_package ASSIGNING <result_fields>.
           READ TABLE itab1 INTO wa_itab1 WITH KEY
                              material =  <result_fields>-material.
           IF sy-subrc = 0.
             w_tabix = sy-tabix.
             IF <result_fields>-/bic/paa1c2033 IS NOT INITIAL.
               wa_itab1-FLAG = 'S'.
               MODIFY itab1 FROM wa_itab1 INDEX w_tabix TRANSPORTING FLAG .
             ENDIF.
           ENDIF.
         ENDLOOP.
         IF itab1 IS NOT INITIAL.
           MODIFY /bi0/pmaterial FROM TABLE itab1.
         ENDIF.

    Here are some performance tips:
    Add FOR ALL ENTRIES IN result_package WHERE material = result_package-material to your select statement
    After your select statement, add IF SY-SUBRC = 0.  SORT itab1 BY material. ENDIF.
    In your read statement, add BINARY SEARCH to the end of it
    At the end of your end routine, make sure to CLEAR itab1.
    You can also increase the number of parallel processes for your DTP, and DSO activation (assuming your target is DSO).

  • Ensure that master data is unique across R/3 source systems within BW

    Hello all,
    I have an issue and don't have any clues for it.
    I wait for your suggestions , please.
    Problem:   we must ensure that master data (represented by Info objects) is unique across R/3 source systems within BW
    Thank you.

    Hi,
    Refer the below links,
    http://www.sap-img.com/business/load-master-data-hierarchies-from-r3-system.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/d2a165ac873b42aba04475719679c4/frameset.htm
    Hope it helps you,
    Regards,
    Ravindra.

  • Master data from multiple system compunding to source id

    Hi all,
    We have a requirement to host multiple Country SAP systems in one BW system. This requires compounding with an infoobject key on all the master data and I am using 0soursystem.
    and found that this configuration is very cumbersome( time taking) we need it to be cost effective also.
    Is there any other way of doing this and at the same time make the Data unique to the Country.
    note: one of the system is in production for 2 years now and loose that data.
    Regards,
    NPR

    Hi,
    a) what about harmonizing master data over all systems and defining one system as the leading master data system?
    b) While uploading the master data, do a concatenation of the key (material no. with the source system id or something similar)
    c) assign a complete different key to the master data and post the original key to a nav. attr. and use the nav. attr. for reporting e.g. material 4711 --> change the key to 0001, post the original no. 4711 to a attr. called zmat_orig which is added as nav.-attr. to the attributes.
    regards
    Siggi

  • Master data from combination of multiple system source

    Hi All,
    We have a situation wherein we have to load master data from 2 different source systems. For the same Business areas ( Ex. SD, FI, etc). with most probably with same values. Since the master data is overwrite, the last load value will only be available.
    Please help me out in the precautions / design change need to be done in the existing system.
    Regards,
    N P Reddy

    Hi NPR,
    For this the recommended scenario is using Source System Compounding for the InfoObjects. See here for full info:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
    Hope this helps...

  • Enhance the Master Data field in Datasource from standard source table

    Hi Friends Please help me to resolve this, would really be very kind of all of you.
    Requirement. I want to Enhance the field ZFACTREG from VIBDBE table in my datasource 0busentity_attr extract structure l_s_REIS_BUSENTITY_ATTR, I want to create the logic in CMOD exit_saplrsap_002 to call my function module for enhancement of master data. Please help me Step by Step
    Thanks
    Poonam Roy
    Step #1
    I put this code which gives me error in CMOD like this
    ERROR : Das formale Argument 'OTHERS' muss am Schluss der Ausnahmeliste stehen.
    ABAP Code#1 IN exit_saplrsap_002
    DATA: l_d_fmname(30) TYPE c.
    CONCATENATE 'Z_DS_' i_datasource(25) INTO l_d_fmname.
    TRY.
    CALL FUNCTION l_d_fmname
    EXPORTING
    I_DATASOURCE = I_DATASOURCE
    I_UPDMODE = I_UPDMODE
    TABLES
    I_T_SELECT = I_T_SELECT
    I_T_FIELDS = I_T_FIELDS
    I_T_DATA = I_T_DATA
    C_T_MESSAGES = C_T_MESSAGES
    EXCEPTIONS
    RSAP_CUSTOMER_EXIT_ERROR = 1
    OTHERS = 2
    IF FOUND.
    IF SY-SUBRC <> 0.
    RASIE RSAP_CUSTOMER_EXIT_ERROR.
    END IF
    CATCH CX_SY_DYN_CALL_ILLEGAL_FUNC.
    ENDTRY.
    Step#2
    I simple created the Function module Z_DS_BUSINESS
    and put the code in source code which gives me error . what should i put in other tabs like"Import", Export", Tables" i kept blank
    ABAP CODE give me error : The Dictionary structure or table "FIELD-SYMBOLS" is either not active. i have to remove include in the FM. WHY SO??
    FUNCTION Z_DS_BUSINENSS
    ""Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(I_DATASOURCE) TYPE RSAOT_OLTPSOURCE
    *" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM
    *" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
    *" TABLES
    *" I_T_SELECT TYPE SBIWA_T_SELECT
    *" I_T_FIELDS TYPE SBIWA_T_FIELDS
    *" I_T_DATA
    *" C_T_MESSAGES STRUCTURE BALMI OPTIONAL
    *" EXCEPTIONS
    *" RSAP_CUSTOMER_EXIT_ERROR
    INCLUDE ZXRSAU02.
    WRITE: / 'INSIDE THE Z_DS_MEASUREMENTS PROGRAM'.
    TABLES: REIS_BUSENTITY_ATTR,
    VIBDBE,
    field-symbols:.<fs_REIS_BUSENTITY_ATTR> like REIS_BUSENTITY_ATTR.
    DATA: BEGIN OF i_c_t_data OCCURS 0.
    include structure REIS_BUSENTITY_ATTR.
    DATA END OF i_c_t_data.
    DATA: i_c_t_data_copy like i_c_t_data OCCURS 0 WITH HEADER LINE,
    begin of i_vibdbe occurs 0,
    INTRENO like vibdbe-INTRENO,
    ZFACTREG like vibdbe-ZFACTREG,
    end of i_vibdbe.
    i_c_t_data_copy[] = i_c_t_data[] = c_t_data[].
    sort i_c_t_data_copy by vibdbe.
    Select INTRENO
    into table i_VIBDBE from VIBDBE
    for all entries in i_c_t_data_copy
    where INTRENO = i_c_t_data_copy- INTRENO.
    if sy-subrc = 0.
    sort i_VIBDBE by INTRENO.
    loop at i_c_t_data assigning <fs_REIS_BUSENTITY_ATTR>.
    clear: i_VIBDBE.
    read table i_VIBDBE with key INTRENO = <fs_REIS_BUSENTITY_ATTR>-INTRENO
    BINARY SEARCH
    transporting ZFACTREG .
    if sy-subrc = 0.
    <fs_REIS_BUSENTITY_ATTR>-ZZFACTORY = i_vibebe-ZFACTREG
    endif.
    null

    I don' t see the dot between the two lines
    OTHERS = 2
    IF FOUND.
    Regards

  • Master Data not being uploaded to Info Object

    Hi all,
    I'm trying to upload some master data  in to an Info Object with attributes. When I trigger the DTP, the status gets stuck to Yellow and the data is not being uploaded. There are no errors being shown.
    The data has reached PSA perfectly. My data source is a flat file.
    Anyone have any ideas?
    Please help
    Thanks

    Hi,
    There could be various reasons for this. I would have gone through checking it this way.
    Activity set 1:
    1) Check in SM50 if there is any activity happening.
    2) Check in SM37 for any cancelled jobs.
    3) Check in SM21 for error logs.
    Activity set 2:
    1) Cancel the current request.
    2) Ensure my transformation (b/w datasource and InfoObject) is active.
    3) Try to reduce the data package size and try (say to 100)
    4) Run the DTP
    Activity set 3:
    1)  If Activity set 1 and 2 do not help me, I would check by deleting the request in my PSA as well. Take only one record of the flat file which I am sure has no illegal characters and try loading.
    2) If successful, this would mean it could be because of the erroneous record in the complete set (It may be taking some time to show up the error and hence the status is still yellow).
    3) If unsuccessful, this could be because of some objects which are inactive. And I would start from deleting and recreating the DTP.
    Also, do you have any routines in the transformation? If so please recheck the logic.
    Hope it helps!!

  • Will master data propose values for transaction data where not maintained

    Hi Friends,
    If we haven't maintain certain chracteristic values in the Transaction record, the same maintaind in the master data......in the report does the system propose the value from Master data. If propose is there any settings do we have to maintaion in the BW System to act such like that.
    For Example in the below Transaction record...........
    Customer*  Documenent No Sales Office Amount
    ABC               1234                     Mumbai           10000
    XYZ                5 678                                             5000
    Sales office haven't mainatined by the user for the record 5678.. Sales office is attribute for the Customer, In the Customer master evry customer mainatined with their sales offcie.Will it automaticcy propose from Master data.
    Thanks & Regards
    Anand

    Hi
    This can be done in a Individual routine.
    First check if the "result" is empty. Else do a look up on Master data table of Customer.
    Sample code :
    Select customer and sales_off from Master data table of customer into itab in start routine.
    In individual routine,
    if result is initial.
    read itab into xtab with key customer.
    result = xtab-sales office.
    endif.

  • Error while creating money market transaction - payment details not retrieving from BP master data.

    Hello friends
                      I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
    No payment details entered for transaction
    Message no. FTR0030
    Please advise to set off this.
    Thanks & Regards
    Swami

    Dear Swami,
    Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
    It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
    System will pick payment details in deal automatically based on business partner.
    Hope this solve your issue.
    Regards,
    Jain
    Message was edited by: Jain Varghese

  • Deleting master data after loading transactional data using flat file

    Dear All,
    I have loaded transaction data  into an infocube using a flat file . While loading DTP i have checked the  option "load  transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
    While loading the flat file, I made a mistake for DIVISION Characteristic  where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
    But when I see the master data for DIVISION , i can see a new entry  with value '4000'.
    My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
    I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
    Please suggest me on this.
    Regards,
    Veera

    Hi,
    Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
    If this master data is not used any where else just delete the master data completely with SID option.
    If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
    Hope this helps
    Akhan.

Maybe you are looking for