Master data transfer between systems

hey guys,
we have a 3 system landscape with the following clients:
DEV 100: golden configuration client
DEV 200: unit test
CIQ 100: qa configuration client
ciq 200: quality/test client
cip 100: production client
I have all the clients locked down to "not modifiable for both customizing and repository objects" except the DEV 100 client. One of my analysts wants to make changes to the master data in the unit test client because the master data is not there in the configuration client. Should I open this unit test client for modifications? If I do so, will I need to import the changes to CIQ and CIP through transport method or would those changes be made manually ? any kind of best practices surround the changes to master data ? My main concern is that if I open the unit test client, everybody would start doing development and customizing in that client and the configuration client would go out of sync. Please advise.
thanks
VM

Hi,
Any master data changes to a "non modifiable" client can be sent using one of the two options :
1. Transport Request
2. ALE (IDoc)
Most probably the master data change he wants to transport requires an ALE setup between the two systems.
Regards,
Jovito

Similar Messages

  • Vendor Master Data Transfer Between the Clients

    Hello Everyone,
    I want to transfer Vendor master data between the clients, can any one help me in this Please?
    I don't want to use LSMW, Is there any other method by which i can copy the vendor between the clients or i have to do it manually?
    Please Help ASAP
    Thanks
    M

    Hi,
    You have to do necessary setting for ALE and IDOC will get generated and data will get transfer based on the Program Schedule in Bacground.
    You can schedule program in bacground as per your requirement of IDOC transfer and data generation from One Client to other. [i.e. end of the day, Hourly, monthly etc.]
    Regards,
    Manish

  • Billing master data - Comparison between systems.

    Hi Gurus:
    We need to compare billing master data between DEV, QAS and PRD to see the differences, since we must normalize the 3 ambients before starting a high impact project in our rates.
    ¿There is any standard functionality that allows me to make this comparison?.
    If not so, was thinking of a customer program (Z) to directly compare the table entries: ESCHS, EKDI, ETRF, TE221, ETTAF, ETTA, ERTFND, TE069, EPREI, etc.
    Comments and suggestions are welcome.
    Regards,
    David

    When I need to compare my Billing tables, I have my Basis guys run SCMP (table compare) and provide them the tables names to use. They have the option to give you only the differences which is nice since that is what I am usually looking for.
    Good Luck!

  • Secure the file/data transfer between XI and any third-party system

    Hi All,,
    I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
    with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
    If any one have idea pls let me know weather it will work or not.
    Thanks in adavance.
    Venkat

    Hi,
    Thanks for your reply.
    I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
    But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
    Thanks,
    Venkat

  • CIF - Master Data Transfer from ERP to SCM(SNC)

    Hi,
    I am very new to SAP SCM.
    Can anyone please provide me documentation links , helpful material for the CIF customization in SNC for Master Data Transfer.
    e.g If I need to send a predefined value for Business Logical System from ERP to SAP SNC
    i.e from ERP 1 to SNC ( Business Logical System ends with suffix 00 )
    and  from ERP 2 to SNC ( Business Logical System ends with suffix 01 )
    Where and how I can make these changes to reflect in my data sending.
    How I can achieve this.
    Please help.
    Best Regards
    Sid

    Siddharth,
    I assume when you say 'SNC' your are referring to Supply Network Collaboration. Here are some Best Practices Building blocks to get you started
    [B02 - connectivity|http://help.sap.com/bp_scmv250/BBLibrary/HTML/B02_EN_DE.htm]
    [B05 - replication|http://help.sap.com/bp_scmv250/BBLibrary/HTML/B05_EN_DE.htm]
    [S32 - SCM Collaboration|http://help.sap.com/bp_scmv250/BBLibrary/HTML/S32_EN_DE.htm]
    There are many more building blocks at
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/BBLibrary_EN_DE.htm
    Regards,
    DB49

  • HR master data transfer

    Hi, I am  sending HR master data from one system to another. I did it in DEV and Qa systems, but in production, I am sending personnels with tcode PFAL and from bd87, IDOC transfer seems succesful.
    however Finance guy, could not change Vendor master data(adding personnel number area to vendor master data ). When I look at pa0000 records seems in those tables, But I dont have pa30 screen authorization, So  in that case what should I do, in this situation.
    Error in vendor master data change request, " the personnel number is unknown, infotype 0000 ( actions ) does not exist for the employee.
    please help ?

    PFAL transaction is used when we want to transfer an object without a change pointer. For sending deltas you should be using RBDMIDOC (TRAN - BD21) and provide the message type . This program will send the delta.
    But neither of the programs  PFAL or BD21 will help in filtering the future dated record. This filtering should happen in an user exit for outbound IDoc. The user exit need to be coded to exclude a change pointer from processing if the key in CP contains a future dated record and that may get processed. This may get complex as you would like to send part of the changed record and not the other part of changed record. For example if you create a new IT0002 with future date, you would still want the current record which was delimited one day prior to future dated record.
    It would be nice to have the target system handle this instead of handling it within SAP.
    Regards
    Ravikumar

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

  • Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

    Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
    FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
    From the vi used in the attachment,i encountered some problems at:
    (1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
    (2) How to synchronies the read & write btw contorller?
    All controller are communicating with each other directly without the need of a host computer to link them together
    Is there any other method to do fast data transfer betwe
    en controller?

    Hi YongNei,
    You were succesful in omiting enough information to make it very difficult to answer!
    Please post your example.
    Please tell us what version of LV-RT you are using.
    Please define what you concider "fast data transfer".
    Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
    WHat exactly has to be syncronized?
    If you have something that is close to working, share that.
    Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
    It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
    PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
    Trying to help you get an answer,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Upload vendor master data from legacy system to internal table tcode xk01

    through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

    By learning the basics of BDC recording and the use of GUI_UPLOAD

  • Data transfer between SAP & Java and Vice versa using IDOC Process

    Dear Experts,
            We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
    In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
    For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
    At this stage, I need your expert opinion  / feedback how to go  about at this stage.
    Meaning,  
                     1. What are the customizing steps needs to be done in SAP..?
                     2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                     3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                     4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
    Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
    Thanks for your cooperation.
    Regards,
    Ramesh

    Maybe too many open questions in the same document.
    Maybe you should repost a more specific question in a technical forum.
    This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

  • Master data from multiple system compunding to source id

    Hi all,
    We have a requirement to host multiple Country SAP systems in one BW system. This requires compounding with an infoobject key on all the master data and I am using 0soursystem.
    and found that this configuration is very cumbersome( time taking) we need it to be cost effective also.
    Is there any other way of doing this and at the same time make the Data unique to the Country.
    note: one of the system is in production for 2 years now and loose that data.
    Regards,
    NPR

    Hi,
    a) what about harmonizing master data over all systems and defining one system as the leading master data system?
    b) While uploading the master data, do a concatenation of the key (material no. with the source system id or something similar)
    c) assign a complete different key to the master data and post the original key to a nav. attr. and use the nav. attr. for reporting e.g. material 4711 --> change the key to 0001, post the original no. 4711 to a attr. called zmat_orig which is added as nav.-attr. to the attributes.
    regards
    Siggi

  • I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    Hi,
    Regarding the issue here, please take a look at the below links to see if they could help:
    Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
    And a blog here:
    Windows Server 2012 slow network/SMB/CIFS problem
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Asking for help about modification to article master data of retail system

    Deal All,
    Is there any one can tell me how to modify the article master data in retail system ?
    I have tried to deal with the requirement by BDC and calling the function BAPI_MATERIAL_MAINTAINDATA_RT,
    but both of the two approaches can not update the customized fields in the table MAW1.
    For BDC, the changed data can only be update in debug mode.
    For the function, no customized fields of table MAW1 are taken into account as to its parameters.
    Can anyone tell how I should do ?
    Thanks in advance,
    Kevin

    Hi Kevin,
    Try FM: MATERIAL_UPDATE_ALL_RETAIL
    Thanks,
    Dharmishta

  • Master data synchronization between SAP systems

    Dear all,
    I have 2 SAP systems and I'm required to synchronize some kinds of HR master data between these 2 systems, how can i achieve that without any ABAP developments?
    Does anyone give me any suggestions or others?
    Best regards,
    Bean

    Hi Bean,
    You can achieve this using IDoc and PI using following scenario.
    1) Populate IDoc in 1st SAP system and pass it to the second system as direct IDoc to IDoc transfer.
    Ex: Basic Idoc Type: HRMD_A07
    2) If direct communication between two XI system is not allowed then you can use PI as middle ware to transfer data.
    But for IDoc you need to create partner profile and ports etc.
    Hi,
    Thanks so much for your kind help.
    How to make the transferring automatically whenever the specified kind of master data is changed.
    Best regards,
    Bean

  • Master Data synchronisation between two Solution Manager systems

    Hi all,
    does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
    Thanks!
    Regards

    I asked a likewise question on the OSS earlier and I was told
    "Use MDM" (which is a separate product and must be licensed separately).
    Markus

Maybe you are looking for