Master data upload via LSMW using IDoc method
Dear all,
I know this has been a topic of many discussions but I would like to ask you is to share your thoughts and possibly experience with the following scenario:
Interface between non-SAP system and SAP system has to be built whereby master data gets created in the non-SAP system and has to be uploaded into SAP. This is a process that needs to be performed on a constant basis and hence my question: is there a way that the MD upload takes place in the background via LSMW with IDoc? Or any other way, for instance, with a flat file, etc.?
Thank you very much for your input!
Regards,
Miro
Miro - It depends upon many factors
1. Number of source systems
2. Volumn of recorsds ( Data to be loaded)
3. Transformation needed or not needed from S to D ( source to destination), We may consider it as
business rules/mapping
Based on above you may segrigate the objects related to data, eventually you can shoose approach of loading in SAP,
As if straigt forward load for some 20k-30K records ( Just a file load on regular basis), one to one mapping then go for LSMW, if some complex transformation logic needed then go SAP data services implementation. best part here is if you multiple sources that can be handeled here.
Accordingly you can proceed ...
Hope it helps.
Best !
Deep
Similar Messages
-
Requesting all to help me how to create lsmw using idoc method
hi
thanx for ur answer
requesting every body in the forum to help me how to create lsmw using idoc method.
regards,
balajiHi Balaji,
LSMW using IDOC is similar to using flat file method. Here you are getting data from IDOC container and mapping data with Idoc segments insted of flatfile column.
Hope this is what you are looking for. If helpful then dont forget to reward me for that
Darshan -
LSMW using IDoc Method *Error :No partner exists with the name '', type ''*
Hi All,
I am a newbie. I am trying LSMW using IDoc Method.
I got an error when i executed Start IDoc Generation step: No partner exists with the name '', type ''
Could anyone tell what wrong I might have done,
Thank you,
Shiv RamHi,
You have to setup your IDoc configuration in LSMW:
1) Enter the menu \Settings\IDoc Inbound Processing
2) Create a FILE port by clicking "Maintain Ports"
3) Create a logical system (LS) partner number by clicking "Maintain Partner Numbers"
4) Be sure your partner profile that you create is "Active" by clicking "Classification"
5) In the end click "Activate IDoc Inbound Processing" bottom.
Run your LSMW again. This time it shoud run wothout any problem.
Hope it helps.
Chang -
Working on LSMW using IDoc method for processing Open Sales Orders
We are currently in middle of creation of a new instance of production for a different Business SBU. We are looking to utilise the LSMW tool using IDocs for uploading / transferring the open orders to the new box. If some one has worked on LSMW using IDocs, please get in touch and if you could share any documents on the process of utilising the LSMW tool using Idocs for any kind of conversions, it would be great. The following is a sample case.
1. Each order will have multiple segments with different qualifiers under various segments.
2. Multiple line items would be available under each order.
Issues we are currently looking to solve :
1. How do you manage to loop through the qualifiers during processing for the same segment.
2. How do you prepare the tool to recognise the multiple line items of the same order.
3. What kind of strategy needs to be used to create the input data file(s). Like, splitting the header and detail level information ?
Note : The volume of data we are looking at is somewhere around 40-60 thousand orders worldwide.
Thanks in Advance.hI vikram check this link
and reward points if helpful
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.jt77.com/system-dynamics/model-01395.html -
Data Migration-LSMW using IDoc Method
Hi Friends,
I have contract relevant information in the form of a excel spreadsheet/tab delimited flat file.
This transactional data has information such as Header Data, Item Data and Sub Item data (BOM explosion).
I need to migrate this data from the flat file to the CRM application using the IDoc Method of LSMW.
/When I used the Batch Input Recording method, the item data was not captured during recording./
Kindly send me relevant information to [email protected]
Thanks in Anticipation
rgards,
PraveenHello Sven,
thanks for your comment. Unfortunatelly those both transactions do not exitst because I work on SAP CRM 7.0 instead of SAP ECC. I also looked for similar transactions in the table but didn't find anything. -
MATERIAL MASTER DATA UPLOADING THROUGH LSMW
Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.MHi Venkat,
Go through the following Steps
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:\material_data.xls"
description : -
separators as select tab radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
select the Program
select continue button
go with via physical file
give the lock mode as 'E'
and execute
Regards
Sreeni -
Class data upload through LSMW using BAPI
Hi All,
Plz tell me how to upload class data through LSMW using BAPI.I also need some study material on BAPI.
Bye,
Mithilesh Tiwariits not possible with single file
for this you need to pass two files of data
1 ) Header data ZSOURCE_LIST_HEADER Source List Header
MATNR C(018) Material Number
Selection Parameter for "Import/
WERKS C(004) Plant
2) item data ZSOURCE_LIST_ITEM Source List Item
MATNR C(018) Material Number
LIFNR C(010) Vendor Number
EKORG C(004) Purchasing Organiz
WERKS C(004) Plant
VDATU C(008) Valid From
BDATU C(008) Valid to
for this use below LSMW IDOC method
Message Type SRCLST Source List
Basic Type SRCLST01 Source List -
Hi
I am working on LSMW-IDOC . I am very new to this .
I am trying to upload open purchase order throgh LSMW IDOC.
Can anyone send me the steps for the LSMW-IDOC method.
I wanted to pass header , item position & delivery schedule & item category data.
How to pass header , item, delivery data. is it pass in different file or it can pass in one file.
As whatever sample file I got It is only one excel file consist of all data.
Plz. help me & guide me .
This is urgent.hI vikram check this link
and reward points if helpful
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.jt77.com/system-dynamics/model-01395.html -
LSMW using IDOC method for scheduling agreement - MM
I am using LSMW IDOC method to create Scheduling agreement. i am using message type : PURSAG_CREATE. I have completed the field mapping and when i tried to process the idoc i am getting the following error.
No instance of object type PurchSchedAgreement has been created. External reference: # 1
There are no clue why this error is popping up.
please let me know if anyone faced similar issues.try entering the values in WE19 and do the posting for teting purpose, make sure you are passing all the values.
-
LSMW using IDOC method for scheduling agreement
I am using LSMW IDOC method to create Scheduling agreement. i am using message type : PURSAG_CREATE. I have completed the field mapping and when i tried to process the idoc i am getting the following error.
No instance of object type PurchSchedAgreement has been created. External reference: # 1
There are no clue why this error is popping up.
please let me know if anyone faced similar issues.Are you using external number range for scheduling agreement, then you have to pass the SA number too if not then check with your MM functional consultant to change the number range from external to internal provided it is agreed by your customer
-
MATERIAL MASTER DATA UPLOADING BY LSMW
Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.Mhttp://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary -
Problem in LSMW using IDOC in convert data step
Hi,
I am getting a Run-time error in CONVERT DATA step of LSMW using IDOC. The error diplayed is a syntax error. I am not able to figure out the error. Anybody having idea about this, please help me...
The data is read successfully.
Edited by: majualex on Nov 4, 2009 9:23 AMError in the ABAP Application Program
The current ABAP program "/SAPDMC/SAPLLSMW_OBJ_070" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1CADMC/SAP_LSMW_CONV_00000051
" in include "/1CADMC/SAP_LSMW_CONV_00000051 " in
line 25:
""." expected after "DATA"."
I think the pgm is standard ABAP program..... -
Profit center and cost center master data upload errors
Hi Sapiens,
Could you please guide me to resolve the below errors in profit center and cost cost center master data upload through LSMW. i am usinng recording method for upload and getting below error while uploading the data from txt file.
1. Valid from and to dates are not converting in DDMMYYYY format, which field type we have to use in field mapping?
2. some of the fields data are overlapping when uploading the data.
3. How to create validation for empty cells data.
thank in advance.
regards,
jagadeesh.Hi
when you are using LSMW for uploading PC & CC, simple way to correct the Error's WHILE RECORDING The First record, while Creating LSMW, B very care full while entering the details ,bez wht ever Fields your updating ..the same Fields get updated While LSMW Processed.
As mentioned above update the vaild from and to date in wht ever format you want While recording, in the same format all the remaining records gets updated..
Hope the suggections will Help you in solving your Issues.
Thanks
Goutam
Edited by: Goutam78 on Apr 29, 2011 8:59 PM -
Hi All,
I am doing the HR master data upload, I found one idoc HRMD_A but i am unable to find the infotypes PA2001,PA2002,PA2010,PA2012 in this idoc type.
Could you please let me know in which type i can get all inoftypes including these .
Thanks,
SatheeshCheck these threads.
Need ur helps on - HR master data upload Thru LSMW
about HR data upload -
How to resolve error while importing data using IDoc method in LSMW ?
Hi
I am trying to import my data using IDoc method in LSMW.
But after completing the whole LSMW process, when I look into the IDOC generated, the error description is as this.
It talks about the process code and other stuff.
Function module not allowed : APPL_IDOC_INPUTI
Message No. B1252
Diagnosis :
The function module APPL_IDOC_INPUTI and the application object type which were determined are not valid for this IDoc.
I am not able to resolve the problem.
Please help.
Regards,
Rachesh Nambiarcheck the below link.
/people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter
Maybe you are looking for
-
If I have two or more iTunes Libraries on one computer, how do I know which one is opening when I click on the iTunes icon on my desktop?
-
Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp
Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well
-
How to add an image in a hub section header
Hi. I want to add an Image in a hub section header. Is it possible to add an image with the section header so that like the section header when I click on the image it would also navigate me to that section page ? samEE
-
How to write XML with attributes to a table in Oracle?
I tried to find solutions over the internet. Some of the stuff I looked at:https://forums.oracle.com/thread/2182669 http://www.club-oracle.com/forums/how-to-insert-data-from-xml-to-table-t2845/ In all these cases, the solution considers XML structure
-
Not completely iBook G4 Related, but I put this here since this is my primary computer. Before the HD failed and I had Panther, I had a nice little piece of software that let me look up info on every Mac and Apple ever made, and to hear their startup