Master/Detail report on same page.

Hi, I am trying to put together a report (10g HTML DB) and can't seem to put together a master/detail report.
I would like to have a header, something like
Project Title -- Project Status etc... for each project. Then below this section
Project Detail 1
Project Detail 2
Project Detail 3
Loop through the projects
It's just two tables. projects and details. Details has a fk project.id.
I tried to do a Form -> Master Detail but it puts them on seperate pages and also allows the data to be edited. I don't need that, this is simply for display.
This is something I can put together just creating an html table in an anonymous PLSQL block but if ability is there in HTML DB I should probably try it that way.

Hi,
This can be achieved by doing something like the following:
Have a single SQL statement that joins the two tables together. eg,
select p.project_title,
d.project_detail1,
d.project_detail2,
etc
from projects p
inner join details d on d.project_id = p.project_id
This will provide a flat table with the project title in the first column for all records.
Then, in the Report Attributes, you need to switch on Column Breaks:
In the Break Formatting section, set Breaks to "First Column"
In the When displaying a break column use this format, enter #project_title#
In the Identify how you would like your breaks to be displayed, select "Repeat headings on break"
Finally, clear the "Show" tick for the project_title column
There's probably something you could do to improve formatting etc, but this should give you a start.
Regards
Andy

Similar Messages

How to create a master detail form on same page in apex 4.2.1

Hi All,
i need to design a master detail form on same page i am not finding an option in wizard from where i can do that.
will appreciate your suggestions.
Thanks

Hi James,
I think that Mike is suggesting that you create a SQL View over the table and join together the individual primary key values into a single, unique, pseudo primary key. You can still include the individual columns in the SQL but you can then use this new column as the primary key on a form. However, you would also need to create INSTEAD OF triggers to handle inserts/updates/deletes as SQL will not allow you to update tables through a view. (See: [http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/create_trigger.htm#i2064426] for the Oracle details on this or Re: How to update view resp. table for an example within Apex).
Ideally, though, you should only really need one key column - is there any need for four?
Andy

Master Detail on the same page PHP - MySQL

Hi,
Is it possible to create a page using spry master region and call MySQL data into a Spry detail region, like you do with xml data?
Basically, is there a way to have master detail regions on the same page without using frames?
Thanks
Bert

Thanks for that, very useful indeed.
But isn't it going to be slow, first transferring the MySQL data to XML then reading XML to display the records.
What is the advantage other then displaying master detail on the same page?
Thanks
Bert

Three master detail on the same page

Hi
I generate master-detail pages (master and detail in the same page) and it works very well, but I can't generate three master detail (master-detail and the detail with other detail, three levels of tables) on the same page. How can I do it?
Thanks in advance
Liceth

Liceth,
You cannot generate this. You can add the third level post-generation using drag and drop.
Steven Davelaar,
JHeadstart Team.

Master-Detail Report

Hi Gurus,
I am trying to implement master-detail report in single window without navigating to other window in OBI 10g by following the below link
http://108obiee.blogspot.in/2010/02/obiee-master-detail-requests-navigation.html
but i am facing problem in creating iframe column and including that column in the report
Can we achieve this requirement in OBI 10g if yes please suggest me how can we do this.
Thanks,

Hi Muram,
For implementing Master-detail for the product report when we click on Prod-Cat from master report(Year, Prod-Cat, Tot-Sales) it as to show the detail report (Prod-SubCat,Tot-Sales) in the same window without navigation to the other window for this scenario I implemented the steps as per the below URL which was send in the previous post.
http://obiee10grevisited.blogspot.in/2012/05/master-detailed-report-on-same-page.html
but I am facing problem in 5th,6th,7th steps could you please suggest me on these.
1>First I created master report with columns (Year, Prod-Cat, Tot-Sales)
2>Second I created detail report with columns(Prod-SubCat,Tot-Sales)
3>I have created two prompts Year and Prod-Cat
4>Now in the dashboard page I kept prompts and two reports in separate sections
5>To build intermediate report for validation which columns I have to take in that report and what I have to give in the fx.
6>In the detail report sections in the edit dashboard how to give the reference to the intermediate report and how to make the report not visible at the initial view of the user.
7>In the main report how to give the navigation to the same page which consist of main and detail report together we can navigation either main report or detail report how we can navigation which consist of both.
Thanks,
Rafi
Edited by: Rafi.B on Aug 29, 2012 11:42 AM

Master-detail report, hide detail on new search

Hi, I'm newbie, so I need help. I have Master-detail report on same page. Master is interactive report, detail is SQL report which use hidden item as condition.
For display detail data I use edit link. But I have problem when I make new search on master, detail still shows the old data.
Can somebody tell me, how can I hide details , when I make new search on master? Or set hidden item to null, when I make new search?
Example you can see in http://htmldb.oracle.com/pls/otn/f?p=51834:4 . Login : demo/demo
Thanks
Igor
PS: Sorry on my broken English

Hi,
This can be achieved by doing something like the following:
Have a single SQL statement that joins the two tables together. eg,
select p.project_title,
d.project_detail1,
d.project_detail2,
etc
from projects p
inner join details d on d.project_id = p.project_id
This will provide a flat table with the project title in the first column for all records.
Then, in the Report Attributes, you need to switch on Column Breaks:
In the Break Formatting section, set Breaks to "First Column"
In the When displaying a break column use this format, enter #project_title#
In the Identify how you would like your breaks to be displayed, select "Repeat headings on break"
Finally, clear the "Show" tick for the project_title column
There's probably something you could do to improve formatting etc, but this should give you a start.
Regards
Andy

Master Detail Reports on the same page

hi experts. i need your assistance in one issue...
i have a master detail reports in one page. Master report displays all the products and details report shows their orders...
what i want is, when user clicks on products graph its detail graph show the orders of that particular record on the same page. Both reports would remain visible on the same page side by side.
if anyone can help?

Hi Asif48,
Just as Visakh suggest, we can add the master data and subreport in the same tablix, then set the visbility of subreport to toggle based on click action of master level row. And add some parameters to filter the related data based on the master report field.
For more details, please refer to the following steps:
Create another report as the subreport and insert some fields.
Create a parameter named Order in the subreport.
In the main report, right-click to insert a subreport in the column right of the master tablix.
Right-click the subpeort to open the Subreport Properties, and select the subreport name in the drop-down list.
In the left panel of the Subreport Properties dialog box, click Visibility.
Select Hide option, and select Product (master level row) to display the subreport to be toggled by the Product report item.
In the left panel of the Subreport Properties dialog box, click Parameters.
Select Order in the drop-down list of Name, and select [Product] (use the related filed name) in the drop-down list of Value.
If there are any other questions, please feel free to let me know.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Group above master/detail report; page break causes repeat of master frame

Hi
I have a a group above master/detail report; when there is a page break part way through the master frame it causes the whole master frame to be repeated on the next page. I don't want this to happen, I just want the remainder of the master frame to be displayed on the next page. any ideas?
TIA

Hi
I've tried switching the "Page Protect" to No at the page level and the "Print Object On" is set to "First Page" but it doesn't solve the problem. The whole master frame is repeated on the next page when a page break occurs part way through. The master/detail Repeating Frame "Print Object On" is set to "Last Page".
Any other ideas?
TIA

To create an application with a master and two details in the same page

How I make to create an application contend a form master with two forms details in the same page?
Tomaz
Message was edited by:
user517841

Hi,
You do not need to mount a screen. Just add a new region with several text fields inside. You should fetch a row by a process and populate the set when you load the page or click on a button. Insert, update, and delete should be done by processes. You have to have Next and Previous buttons to brows trough all rows of the detail table.
The most important thing here is what the connections between tables in your database are.
If they are the "One to many, One to one" you can use the approach described above.
If they are "One to many, One to many" will be better to use buttons or links to lunch details' tables in separate forms.
If the second and third tables are connected only to the master table you can use two buttons at the right of every master row. Clicking on the buttons will bring separate form for each detail table.
If the third table is just a luckup table to the second one you can use "Select List" field into tabular form of the second table in one Master-Detail form.
Konstantin
[email protected]

Master-detail reports with variable number of pages in a big report

I am designing with Reports 6.0.5.32.0 a master-detail report such as a
combination between a customer with his name, address etc, at the top of
the page (always 60% of the first page) and then as details lines with his orders.
For one customer seems relatively OK with the variable number of pages in accordance with the number of his orders.
When the main query finds more customers I present always the customer at the top of
a new page (that's easy), but how can I control the number of the next pages for the orders, variable for every customer.
I can not predict how many pages are necessary for a customer and white pages are
not desirable. When the number of Max. Vertical Body Pages is too low I can get the next pages for every customer, but appears an
uncontrollable shift to the left.
For instance, a customer with 40 orders needs 3 pages, one with 4 orders only 1 page, one with 15 orders 2 pages, etc.
What's the magic property for a secure and precise layout?

Hi Andreas,
did you try setting vertical spacing to expand or variable on master repeating frame (and posible other frames surrounding master repeating frame)?
Hope this helps

Multiple (updatable) details in the same page.

Hello,
I tried to put two updatable details in the same page and got the error
"Updatable SQL Query already exists on page 11. You can only add one updatable SQL query per page. Select a different page"
So having more than one updatable detail is not allowed in apex ?
I have a master table with three details. Should I create one page for each one of them ?
Thanks in advance
Bye
Nicola

What you want to use are called collections. Here is a simple collection example:
The process goes in 4 steps: gather the data, display the data, update based on user input, then write the changes. Each step requires it's own piece of code, but you can extend this out as far as you want. I have a complex form that has no less than a master table and 4 children I write to based on user input, so this can get as complex as you need. Let me know if anything doesn't make sense.
First, create the basic dataset you are going to work with. This usually includes existing data + empty rows for input. Create a Procedure that fires BEFORE HEADER or AFTER HEADER but definitely BEFORE the first region.
DECLARE
v_id     NUMBER;
var1     NUMBER;
var2     NUMBER;
var3     VARCHAR2(10);
var4     VARCHAR2(8);
cursor c_prepop is
select KEY, col1, col2, col3, to_char(col4,'MMDDYYYY')
    from table1
    where ...;
i         NUMBER;
cntr      NUMBER := 5; --sets the number of blank rows
BEGIN
OPEN c_prepop;
    LOOP
      FETCH c_prepop into v_id, var1, var2, var3, var4;
      EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
        p_collection_name => 'MY_COLLECTION',
        p_c001 => v_id, --Primary Key
        p_c002 => var1, --Number placeholder
        p_c003 => var2, --Number placeholder
        p_c004 => var3, --text placeholder
        p_c005 => var4 --Date placeholder
    END LOOP;
CLOSE c_prepop;
for i in 1..cntr loop
    APEX_COLLECTION.ADD_MEMBER(
        p_collection_name => 'MY_COLLECTION',
        p_c001 => 0, --designates this as a new record
        p_c002 => 0, --Number placeholder
        p_c003 => 0, --Number placeholder
        p_c004 => NULL, --text placeholder
        p_c005 => to_char(SYSDATE,'MMDDYYYY') --Date placeholder
end loop;
END;Now I have a collection populated with rows I can use. In this example I have 2 NUMBERS, a TEXT value, and a DATE value stored as text. Collections can't store DATE datatypes, so you have to cast it to text and play with it that way. The reason is because the user is going to see and manipulate text - not a DATE datatype. If you are using this as part of a master/detail form, make sure that your SQL to grab the detail is limited to just the related data.
Now build the form/report region so your users can see/manipulate the data. Here is a sample query:
SELECT rownum, apex_item.hidden(1, c001), --Key ID
     apex_item.text(2, c002, 8, 8) VALUE1,
     apex_item.text(3, c003, 3, 3) VALUE2,
     apex_item.text(4, c004, 8, 8) VALUE3,
     apex_item.date_popup(5, null,c005,'MMDDYYYY',10,10) MY_DATE
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'MY_COLLECTION'This will be a report just like an SQL report - you're just pulling the data from the collection. You can still apply the nice formatting, naming, sorting, etc. of a standard report. In the report the user will have 3 "text" values and one Date with Date Picker. You can change the format, just make sure to change it in all four procedures.
What is critical to note here are the numbers that come right before the column names. These numbers become identifiers in the array used to capture the data. What APEX does is creates an array of up to 50 items it designates as F01-F50. The F is static, but the number following it corresponds to the number in your report declaration above, ie, F01 will contain the primary key value, F02 will contain the first numeric value, etc. While not strictly necessary, it is good practice to assign these values so you don't have to guess.
One more note: I try to align the c00x values from the columns in the collection with the F0X values in the array to keep myself straight, but they are separate values that do NOT have to match. If you have an application you think might get expanded on, you can leave gaps wherever you want. Keep in mind, however, that you only have 50 array columns to use for data input. That's the limit of the F0X array even though a collection may have up to 1000 values.
Now you need a way to capture user input. I like to create this as a BEFORE COMPUTATIONS/VALIDATIONS procedure that way the user can see what they changed (even if it is wrong). Use the Validations to catch mistakes.
declare
j pls_integer := 0;
begin
for j1 in (
select seq_id from apex_collections
where collection_name = 'MY_COLLECTION'
order by seq_id) loop
j := j+1;
--VAL1 (number)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>2,p_attr_value=>wwv_flow.g_f02(j));
--VAL2 (number)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f03(j));
--VAL3 (text)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>4,p_attr_value=>wwv_flow.g_f04(j));
--VAL4 (Date)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>5,p_attr_value=>wwv_flow.g_f05(j));
end loop;
end;Clear as mud? Walk through it slowly. The syntax tells APEX which Collection (p_collection_name), then which row (p_seq), then which column/attribute (p_attr_number) to update with which value (wwv_flow.g_f0X(j)). The attribute number is the column number from the collection without the "c" in front (ie c004 in the collection = attribute 4).
The last one is your procedure to write the changes to the Database. This one should be a procedure that fires AFTER COMPUTATIONS AND VALIDATIONS. It uses that hidden KEY value to determine whether the row exists and needs to be updated, or new and needs to be inserted.
declare
begin
--Get records from Collection
for y in (select TO_NUMBER(c001) x_key, TO_NUMBER(c002) x_1,
             TO_NUMBER(c003) x_2,
             c004 x_3,
             TO_DATE(c005,'MMDDYYYY') x_dt
           FROM APEX_COLLECTIONS
           WHERE COLLECTION_NAME = 'MY_COLLECTION') loop
    if y.x_key = 0 then --New record
        insert into MY_TABLE (KEY_ID, COL1,
            COL2, COL3, COL4, COL5)
          values (SEQ_MY_TABLE.nextval, y.x_1,
              y.x_2, y.x_3, y.x_4, y.x_dt);
    elsif y.x_key > 0 then --Existing record
        update MY_TABLE set COL1=y.x_1, COL2=y.x_2,
             COL3=y.x_3, COL4=y.x_4, COL5=y.x_dt
         where KEY_ID = y.x_key;
    else
      --THROW ERROR CONDITION
    end if;
end loop;
end;Now I usually include something to distinguish the empty new rows from the full new rows, but for simplicity I'm not including it here.
Anyway, this works very well and allows me complete control over what I display on the screen and where all the data goes. I suggest using the APEX forms where you can, but for complex situations, this works nicely. Let me know if you need further clarifications.

HTTP 400 Bad Request error in master/detail report

Using APEX 3.2
I have master/detail report and thought all was working fine because the detail lines were less than 100. I increased the number of lines to 300 and then when the Save or Delete buttons are pressed, we get the HTTP 400 Bad Request error. I decreased the lines to 100 (about 32K) and everything works again.
Is there a size limitation on the detail? FYI - the header regeion is on the same page as the detail. If there is a size limitation, is there a way to increase this?
If you experts don't think the error is a result of the size, could there be another cause?
THANKS FOR YOUR HELP!
Sandie

Hi All,
Issue resolved:) ...that due to When calling a URL in the REST Receiver Channel, all GET variables are ignored
so we had to upgrade SP10 patch level 5 and all services are working as we expected.
Also pls check Note :2114322
Thanks,
Maheswarareddy

Master-Detail reports in Reports 6i

I am trying to write a master-detail report where the master record prints on the top of page one and the detail records print on the top of page two. They would repeat this for additional records.
Currently I have a repeating frame with two frames inside it (the repeating frame is on one page of the layout model). The top frame is for the master record (this is a regular frame) and the bottom frame is for the detail records (this is a repeating frame). I can get the detail records to print on the second page, but they print at the same position as in the layout model (towards the bottom of the page).
The question I have is how to get the detail records to print at the top of page two?
Thanks in advance

Hi Todd!
I had the similar task but implemented it a little bit differently. Try the following on the master record frame: set Vertical Elasticity to variable and create format trigger
function M_1FormatTrigger return boolean is
PAGE_NUM NUMBER;
begin
srw.get_page_num (page_num);
if mod(page_num,2)=0 then
return false;
end if;
return (TRUE);
end;
Both of this things should release space occupied by the master frame from the second/even pages and move detail frame up.
Regards,
Andrew Velichko
Brainbench MVP for Oracle Developer 2000
http://www.brainbench.com

Master Detail Report Export to Excel/CSV

Hello,
Does anybody know how one may export a master detail report page - master is a html region, detail is a report region export to a csv file.
The only option I found i the layout and pagination - export csv option, but this generates just the report region...
Is there any possiblility to export the report as shown on screen to csv?
Thanx
Johann

Hi,
Limit the range of data to be exported and check any row missing.
Thanks & Regards,
Nagarajan

Master Detail Report + Tab navigation error

Hello All,
I built a master detail report and included a standard tab set. I built it with the wizard. When tabbing from the report page there is no problem. When tabbing from the associated master detail page you always get "web page not found" with this in the address bar-"http:///apex/wwv_flow.accept". I understand why you would not want to tab out from this type of page. Can anyone point me in the right direction to remove the tabs from view on this page. All my attempts want to remove the tabs at the application level. I am using the one level tab page template. Thanks ...

Wayne,
If you can put your application on apex.oracle.com and tell me how I can see this problem, that might be easiest. Just need your workspace name and application ID (plus instructions).
Scott

Master/Detail report on same page.

Similar Messages

Maybe you are looking for