Master Plan Report

What is mean by Master Plan Report ?
This is something used to generate master plan forecasts.
Please share your view / other information / T-code related to this ?

Hi,
   As far as i'm concerned, i hope u mean to say "Master Plan Report" as "Master Production Scheduling - MPS ".
  Here is some points:
The aim of MPS is to reduce storage costs and to increase planning stability. This is useful in the following cases:
- To ensure that there is good material availability, various floats and a safety stock are entered, which inevitably lead to high stock levels. Thus, high storage costs are incurred, especially for valuable materials.
- The master plan of these materials greatly influences the entire production process: The planning of the dependent parts depends on the planning result of the finished products and main assemblies, even if the finished products represent a small share of all the materials to be planned. Frequent changes at finished product level can render the complete MRP run unstable.
  Check up the foll. link too :
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
- Thaila Shree

Similar Messages

  • Vendor master analysis report

    hi,
    what is vendor master analysis report? and how to create it?

    Hi
    This link may be useful
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/b97fd2414511d188fc0000e8322f96/frameset.htm

  • Master Detail Report for PDF Printing

    Dear All,
           While trying to create a master detail report using Oracle APEX 4.2 and BI Publisher. I tried creating report queries and report layout following the below mentioned steps.
    CREATE TYPE emp_row AS OBJECT (
      EMPNO NUMBER(4),
      ENAME VARCHAR2(10),
      JOB VARCHAR2(9),
      MGR NUMBER(4),
      HIREDATE DATE,
      SAL NUMBER(7,2),
      COMM NUMBER(7,2)
    CREATE TYPE emp_tab AS TABLE OF emp_row;
    CREATE TYPE dept_row AS OBJECT (
      DEPTNO NUMBER(2),
      DNAME VARCHAR2(14),
      LOC VARCHAR2(13),
      EMP_LIST emp_tab
    SELECT SYS_XMLAGG (
      SYS_XMLGEN(
      dept_row(
      d.deptno, d.dname, d.loc,
      CAST(MULTISET(SELECT e.empno, e.ename, e.job, e.mgr, e.hiredate, e.sal, e.comm
      FROM emp e
      WHERE e.deptno = d.deptno) AS emp_tab)
      SYS.XMLGENFORMATtYPE.createFormat('DEPT')
      ) AS "XML_QUERY"
    FROM dept d
    WHERE d.deptno = 10;
    Though the above steps generates xml output while trying to generate in APEX it says unsupported datatype. Tried using DBMS_LOB as well no luck. Any inputs will be quite helpful. Should there be any other way to incorporate master detail report printing in APEX kindly advise.
    Thanks
    Ahmed

    Hi Ahmed_Jed,
    Ahmed_Jed wrote:
    Thanks Kiran for your prompt response. I tried following the steps already using this link (How To Create a Master-Detail PDF Report) somehow the detail record was not getting processed perhaps was trying to generate xml data using the above query. Any other reference will be highly appreciated.
    Regards
    Ahmed
        Well the problem lies here:
    SELECT SYS_XMLAGG (
      SYS_XMLGEN(
      dept_row(
      d.deptno, d.dname, d.loc,
      CAST(MULTISET(SELECT e.empno, e.ename, e.job, e.mgr, e.hiredate, e.sal, e.comm
      FROM emp e
      WHERE e.deptno = d.deptno) AS emp_tab)
      SYS.XMLGENFORMATtYPE.createFormat('DEPT')
      ) AS "XML_QUERY"
    FROM dept d
    WHERE d.deptno = 10;
        The Report Query itself generates XML data (in the required BI Publisher format). So, no need to generate it like this.
        As you are using table functions your query should be of the type:
    SELECT EMPNO
                , ENAME
                , JOB
                , MGR
                , HIREDATE
                , SAL
                , COMM
        FROM TABLE ( EMP_PKG.GET_EMPLOYEES ( :PXX_DEPTNO ))
        where EMP_PKG.GET_EMPLOYEES is packaged table function which returns the Object Table of type EMP_TAB mentioned above.
        When you test the above Report Query with sample DEPTNO, it will generate the sample XML, which you can use to generate Report Layout in RTF format using BI Publisher Desktop.
        Hope this helps!
    Regards,
    Kiran

  • Master Detail Report Export to Excel/CSV

    Hello,
    Does anybody know how one may export a master detail report page - master is a html region, detail is a report region export to a csv file.
    The only option I found i the layout and pagination - export csv option, but this generates just the report region...
    Is there any possiblility to export the report as shown on screen to csv?
    Thanx
    Johann

    Hi,
    Limit the range of data to be exported and check any row missing.
    Thanks & Regards,
    Nagarajan

  • Best Practice for Master Data Reporting

    Dear SAP-Experts,
    We face a challenge at the moment and we are still trying to find the right approach to it:
    Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
    Questions they want to answer here are for example:
    - How many active Materials/SKUs do we have?
    - Which country/Sales Org has adopted certain Materials?
    - How many Series do we have?
    - How many SKUs below to a specific season
    - How many SKUs are in a certain product lifecycle
    - etc.
    The challenge is, that the Master Data is stored in tables with different keys in the R/3.
    The keys in these tables are on various levels (a selection below):
    - Material
    - Material / Sales Org / Distribution Channel
    - Material / Grid Value
    - Material / Grid Value / Sales Org / Distribution Channel
    - Material / Grid Value / Sales Org / Distribution Channel / Season
    - Material / Plant
    - Material / Plant / Category
    - Material / Sales Org / Category
    etc.
    So even though the information is available on different detail  levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
    Best regards
    Lukas

    Pass a reference to the parent into the modal popup. Then you
    can reference anything in the parent scope.
    I haven't done this i 2.0 yet so I can't give you code. I'll
    post if I do.
    Oh, also, you can reference the parent using parentDocument.
    So in the popup you could do:
    parentDocument.myPublicVariable = "whatever";
    Tracy

  • Master/Master Matrix Report

    May I know is it possible to create a Master/Master matrix report? The example given in the Reports Documentation shows Master/Master Tabular reports only and I have been attempting to create a Matrix one but without success. Thank You.
    Cheers,
    Tan

    I have never come across a two query M:M matrix report. Just out of curiosity, what is your requirement that would make that necessary?
    Metalink provides a couple of different ways to do matrix reports (including the 1 query and 3 query methods) but I haven't seen anything to the effect of what you are describing.
    Regards,
    Steve

  • Master Data Report

    Hi,
    I want to create a master data report which contains just charactristics no key figures.
    For excample I want to show which client has which type of rate.
    How can I do this?
    Everytime I get an error message that I have to determine a key figure in the report.
    THanks
    Johannes

    Thanks I understand that I have to use a workaround like this.
    But can I display characterisitc values in the query like a key figure value?
    Customer | Rate
    Client 1    | AAA
    Client 2    | BBB
    Clinet 3    | AAA
    Thanks
    Johannes

  • Master details report/form

    Hi Friends,
    I want to create a Master-Detail report/form.
    I have one Master Table and it has 3 Detail tables.
    Example:
    Master Table: Members
    Detail Tables: Contributions
                   Loans
                   Benefit ClaimsI want to show when I click on a specific Member in the report edit , I can make entry/update to all
    the 3 detail tables. And not going each entry separately.
    Is this design requirement good?
    Thanks a lot

    You can look here on how to create multiple detail tables:
    http://htmldb.oracle.com/pls/otn/f?p=31517:163
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Group above master/detail report; page break causes repeat of master frame

    Hi
    I have a a group above master/detail report; when there is a page break part way through the master frame it causes the whole master frame to be repeated on the next page. I don't want this to happen, I just want the remainder of the master frame to be displayed on the next page. any ideas?
    TIA

    Hi
    I've tried switching the "Page Protect" to No at the page level and the "Print Object On" is set to "First Page" but it doesn't solve the problem. The whole master frame is repeated on the next page when a page break occurs part way through. The master/detail Repeating Frame "Print Object On" is set to "Last Page".
    Any other ideas?
    TIA

  • Help needed on balance sheet plan report for the current year

    Hi BW gurus,
    I have a problem with reporting.
    I need to get  Balance-Sheet Plan Reports for the Planned year and for the current year.
    To get the report for the planned year its  straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
    But I have a problem with the current year report.
    I have fiscal year and the company code as the variables.
    The report should be like this.
    If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
    And the 0balance for the twelve fiscal periods should be as follows
    From jan 2006 to june 2006(fiscal periods) it should have only the actuals
    From july 2006 to dec 2006(fiscal periods) it should have  only  the plan
    I have already built a query by having two restricted keyfigures on 0balance.
    One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
    But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
    But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
    Hope you people can visualize my report.
    Please help me ASAP.
    Any kind of help is appreciated.
    My mail id is [email protected]
    Thanks in advance
    Regards
    Sam Mathew

    Hi Sam,
        Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
    Thanks
    Prasad

  • Standard SAP Planning reports

    Hi all
    I have a requirement for some planning reports and I am hoping to find them in standard ECC.
    Can anyone let me know if they are aware of what is available to meet the following;
    Coverage reports or shorage reports at the component level
    Waterfall reporting
    thanks

    Hi
    Did you try CO09 or MD46?
    Kindly revert back

  • Withholding tax master data report changes in SAP FI

    Hi All,
    In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax master data report.
    Changes only functionality has to be added to the selection screen of the report, the report has to display changes made to the tax master data with in a range of period, this was achieved easily by making program changes. Only issue now is when we do it in development client its showing us properly but when we do it in production it is not working because when ever we do any configuration changes we do it in the development client and transport it to production client so the changes done to any configuration with respect to WHT are not recorded in the production environment as they are transported from development client.
    So, we are unable to achieve this in production client, please help me out with this issue.
    Tthanks in advance

    hi
    i need field
    withholding tax exemption no, exemption from date, todate, Exemption reason, 
    as a master data it is saved in vendor master data > withholding tax accounting
    but i need where it is saved in transaction data.
    thanks

  • Different types of Planning Bills in Master Planning and its use in Industr

    Hi friends,
    can u pls help me in giving some details about this in ERP
    Different types of Planning Bills in Master Planning and its use in Industry.
    Thank you
    Chandra

    Dear Chandra,
    I will suggest you to visit http://sap-img.com/sap-sd.htm. There is a separate section of Billing on this link. It will give you the overview of billing in SAP.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Binds in Master/Detail Reports: Problems and Solutions

    I've been trying to use bind variables in the master report of master/detail reports with multiple detail reports; but, I've been getting a problem with the detail reports not displaying data.
    Here's a sample sequence of events:
    1) Select the master/detail report under User Defined Reports.
    2) Connect to a DB (if necessary).
    3) Enter any value(s) for the bind(s) for the master report.
    4) Select a row in the master report.
    5) The currently selected detail report displays column names and data.
    6) Select a different detail report.
    7) Nothing displays except column names.
    8) Select a different detail report.
    9) Nothing displays except column names.
    10) Click the currently selected row in the master report.
    11) Now the current selected detail report displays (column names and) data.
    I have found that if, I am more selective with my bind variable names, I can get things to work as expected.
    First, let me show an example of some SQL that was giving me problems.
    Master Report:
    select distinct OWNER
    from SYS.ALL_OBJECTS
    where (OWNER like :OWNER or :OWNER is NULL)
    Detail Reports:select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'INDEX'replacing 'INDEX' with other values for the other detail reports.
    (I did have this problem with other SQL too but hopefully this SQL will run on everyone's DB.)
    The first solution I found was to change the name of the bind in the master to something like OWNER_BIND.
    The second solution I found was to change the master to
    select distinct OWNER as POWNERand change the detail reports to
    where OWNER = :POWNERAnother solution might be to adjust the bind variable names' case, but I didn't look at that.
    While I was trying different things to get this to work, one of the goofy things that SQL Developer did was add <binds>s to the <query>s of the detail reports in my UserReports.xml. IIRC, it even did this to a master/detail report that I was not editing. So, if you run into this problem, you might want to open your UserReports.xml and clean it up by hand. (Actually, that might be good advice for other problems too.)
    Tip: I've had other problems with my User Reports such as disappearing reports; so, not only do I regularly make copies my UserReports.xml, I also save report(s) into separate XML files and use Tools > Preferences... > Database > User Defined Extensions to add REPORT-type extensions to SQL Developer. (Kris Rice talked a bit about REPORT-type extensions in this blog entry: http://krisrice.blogspot.com/2006/11/xml-extension-points-reports.html)
    FYI: I'm using sqldeveloper-1.1.2.2579 on Windows XP w/ SP2. The DB is Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.

    Here is the complete XML exported from a problem report. If you want to use this, save it as an XML file then import that file from within SQL Developer (ie, right-click on User Defined Reports and choose Import).
    Notice that there are <binds>s on the detail reports. They don't belong there; only the one on the master report belongs. (The <binds> is specified by the Binds tab when creating a report. They are for prompting the user for value(s) and you cannot do that in child reports.) Even if I removed the <binds>s from the detail reports before importing the XML file, I still see the problem. SQL Developer also ends up putting them back. I think that it might happen to each detail report individually as it is visited when using (ie, not editing) the master/detail report.
    <?xml version="1.0" encoding="UTF-8" ?><displays><display id="" type="" style="Table" enable="true">
         <name><![CDATA[Sad]]></name>
         <description><![CDATA[]]></description>
         <tooltip><![CDATA[]]></tooltip>
         <drillclass><![CDATA[null]]></drillclass>
         <CustomValues>
              <TYPE>horizontal</TYPE>
         </CustomValues>
         <query>
              <sql><![CDATA[select distinct OWNER as OWNER
    from SYS.ALL_OBJECTS
    where (OWNER like :OWNER or :OWNER is NULL)]]></sql>
              <binds>
                   <bind id="OWNER">
                        <prompt><![CDATA[OWNER (like)]]></prompt>
                        <value><![CDATA[NULL_VALUE]]></value>
                   </bind>
              </binds>
         </query>
         <display id="null" type="Detail" style="Table" enable="true">
              <name><![CDATA[INDEX]]></name>
              <description><![CDATA[]]></description>
              <tooltip><![CDATA[]]></tooltip>
              <drillclass><![CDATA[null]]></drillclass>
              <CustomValues>
              </CustomValues>
              <query>
                   <sql><![CDATA[select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'INDEX']]></sql>
                   <binds>
                        <bind id="OWNER">
                             <prompt><![CDATA[OWNER]]></prompt>
                             <tooltip><![CDATA[OWNER]]></tooltip>
                             <value><![CDATA[NULL_VALUE]]></value>
                        </bind>
                   </binds>
              </query>
         </display>
         <display id="null" type="Detail" style="Table" enable="true">
              <name><![CDATA[PACKAGE]]></name>
              <description><![CDATA[]]></description>
              <tooltip><![CDATA[]]></tooltip>
              <drillclass><![CDATA[null]]></drillclass>
              <CustomValues>
              </CustomValues>
              <query>
                   <sql><![CDATA[select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'PACKAGE']]></sql>
                   <binds>
                        <bind id="OWNER">
                             <prompt><![CDATA[OWNER]]></prompt>
                             <tooltip><![CDATA[OWNER]]></tooltip>
                             <value><![CDATA[NULL_VALUE]]></value>
                        </bind>
                   </binds>
              </query>
         </display>
         <display id="null" type="Detail" style="Table" enable="true">
              <name><![CDATA[PACKAGE BODY]]></name>
              <description><![CDATA[]]></description>
              <tooltip><![CDATA[]]></tooltip>
              <drillclass><![CDATA[null]]></drillclass>
              <CustomValues>
              </CustomValues>
              <query>
                   <sql><![CDATA[select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'PACKAGE BODY']]></sql>
                   <binds>
                        <bind id="OWNER">
                             <prompt><![CDATA[OWNER]]></prompt>
                             <tooltip><![CDATA[OWNER]]></tooltip>
                             <value><![CDATA[NULL_VALUE]]></value>
                        </bind>
                   </binds>
              </query>
         </display>
         <display id="null" type="Detail" style="Table" enable="true">
              <name><![CDATA[SEQUENCE]]></name>
              <description><![CDATA[]]></description>
              <tooltip><![CDATA[]]></tooltip>
              <drillclass><![CDATA[null]]></drillclass>
              <CustomValues>
              </CustomValues>
              <query>
                   <sql><![CDATA[select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'SEQUENCE']]></sql>
                   <binds>
                        <bind id="OWNER">
                             <prompt><![CDATA[OWNER]]></prompt>
                             <tooltip><![CDATA[OWNER]]></tooltip>
                             <value><![CDATA[NULL_VALUE]]></value>
                        </bind>
                   </binds>
              </query>
         </display>
         <display id="null" type="Detail" style="Table" enable="true">
              <name><![CDATA[TABLE]]></name>
              <description><![CDATA[]]></description>
              <tooltip><![CDATA[]]></tooltip>
              <drillclass><![CDATA[null]]></drillclass>
              <CustomValues>
              </CustomValues>
              <query>
                   <sql><![CDATA[select *
    from SYS.ALL_OBJECTS
    where OWNER = :OWNER
    and OBJECT_TYPE = 'TABLE']]></sql>
                   <binds>
                        <bind id="OWNER">
                             <prompt><![CDATA[OWNER]]></prompt>
                             <tooltip><![CDATA[OWNER]]></tooltip>
                             <value><![CDATA[NULL_VALUE]]></value>
                        </bind>
                   </binds>
              </query>
         </display>
    </display>
    </displays>

  • Master-Detail Report

    Hi Gurus,
    I am trying to implement master-detail report in single window without navigating to other window in OBI 10g by following the below link
    http://108obiee.blogspot.in/2010/02/obiee-master-detail-requests-navigation.html
    but i am facing problem in creating iframe column and including that column in the report
    Can we achieve this requirement in OBI 10g if yes please suggest me how can we do this.
    Thanks,

    Hi Muram,
    For implementing Master-detail for the product report when we click on Prod-Cat from master report(Year, Prod-Cat, Tot-Sales) it as to show the detail report (Prod-SubCat,Tot-Sales) in the same window without navigation to the other window for this scenario I implemented the steps as per the below URL which was send in the previous post.
    http://obiee10grevisited.blogspot.in/2012/05/master-detailed-report-on-same-page.html
    but I am facing problem in 5th,6th,7th steps could you please suggest me on these.
    1>First I created master report with columns (Year, Prod-Cat, Tot-Sales)
    2>Second I created detail report with columns(Prod-SubCat,Tot-Sales)
    3>I have created two prompts Year and Prod-Cat
    4>Now in the dashboard page I kept prompts and two reports in separate sections
    5>To build intermediate report for validation which columns I have to take in that report and what I have to give in the fx.
    6>In the detail report sections in the edit dashboard how to give the reference to the intermediate report and how to make the report not visible at the initial view of the user.
    7>In the main report how to give the navigation to the same page which consist of main and detail report together we can navigation either main report or detail report how we can navigation which consist of both.
    Thanks,
    Rafi
    Edited by: Rafi.B on Aug 29, 2012 11:42 AM

Maybe you are looking for