Mat Ledger, Per.Unit Price for materials showing wronglu in Group Valuation

Hi,
Periodic Unit Price of the materials for plant 1300 belongs to company code 1300 showing wrong value in Group Valuation.
Usually Periodic price for all valuations viz., Legal, Group and Profit center valuations should be same, why because we are using same cost component structure in order to arrive the actual cost for all the above three valuations.
Even though Group Valuation of Per. Unit Price is not matching with the Legal and profit center valuations Per. Unit Price. But both legal and profit center valuations are matching.
Please note that, actual cost component split for actual costing is not activated for plant 1300.
When analyzing this issue, it is observed that only the settlement value in between the Group, Profit center and legal valuation is differing for material ledger document.
But accounting document, PCA document, controlling documents are updating correctly.
Please help us how can i proceed to get the details of cost components, even actual cost component structure is not activiated for actual costing.
what are the possible reasons for differing values in Group valuations.
Regards,
S Vasu
Because of this reason system is calculating different values in group valuation (comparatively with legal and PCA valuations) at lower levels and flowing the same values to multilevel.
Edited by: VASU SIKHAKOLLI SIKHAKOLLI on Mar 8, 2009 5:53 AM

Dear
No all are different currencies
Regards
Sivakumar S.

Similar Messages

Difference in per unit price in ML (Material Ledger)

Dear Gurus
The price in the e material master per unit price of material under Group currency, Group valuation view differs.
Company code currency (Legal Valuation)
10   SAR
Group Currency (Group Valuation)
20   SAR
Group Currency (Profit Center Valuation)
10   SAR
Please help me on this.
Thanks in Advance
Regards
Sivakumar S

Ans

Per. unit price in MM

Dear Friends,
I am new to Material ledger. I would like to clarify Per. unit price in Material master when meterial ledger is active wtih option 2 transaction based.
Material is with Stnd price 10 $. recceived(MIGO) 3 parts @20 each.Costing view of mat master shows...
Total stock : 3
Standard price : $10
Inv value : $ 30. Its fine till here, But Per. unit price also shows $10 and Value/per.unit pr is showing $30, It is price variances. Shouldt Per. unit price be $20 Value/per.unit pr $60. How does it used when ML is active?
Thanks,
Balaji

Hi,
If material ledger is active than the given below thread will be useful for you:
http://help.sap.com/saphelp_46c/helpdata/en/a5/320e28d56c11d295c200a0c930328a/content.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/COPCACT/COPCACT.pdf
Thanks & Regards
R.K

Wrong unit price for sourced item in iProcurement.

Hi all,
We have a BPA for a category, which has been revised and approved. Now when the user is going for shopping and searching the Item Description it is showing the correct/revised unit price for the item. But when the item is added to the cart and cart is viewed the Unit Price showing is different from the first search.
Please guys help me out on this. Also if any one can guide me to the procedure/OAF VO query which fetches the details at the shopping cart level then also it will be helpful.
Awaiting is your response.
Regards
Prakash Kumar

Hi Guys,
One of the reason I found out from metalink(136674.1) is the 3 listed profile options for iProc should have 3 distinct line types. I am testing it now. Once done will update the results here.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=136674.1
Thanks & Regards
Prakash Kumar
Edited by: prakashjnvb on Jul 25, 2011 2:30 PM

PER UNIT PRICE AT GOODS RECEIPT

Dear Experts,
Is it possible to get Report on Per Unit Price of Goods Receipt as well Invoice Receipt.
Is there is any record or data base table, which stores Goods Receipt and Invoice Receipt Per unit price.
Please suggest if any standard report is there or Give me the data base table name and field name where these values are stored.
Thanks In advance

hi
goto ME80FN
here give some parameters and execute
now go to change view (button at right )
select po histry mode
u will get GR price PO price and IV price and quantity of all
now do F1 and get tables of each and try developing the report
regards
kunal

Unit price for invoice

Hi Experts,
I want to get unit price for invoice line items from BSEG table.
How to get it.
What is the unit price field for invoice line items.
Regards,
Sangeeta.

Hi Sasi,
Should I take the line item amount(WRBTR) for unit price from bseg table?
Regards,
Sangeeta.
Edited by: Sangeeta on Dec 29, 2008 8:00 AM

Table with latest sales price for materials

Hello,
in which table in SAP can I find the latest sales prices for materials (spare parts)
Thanks,
Anne

Check with tables,
VBAP (Sales Document: Item Data)
MBEW (Material Valuation)
KONV (Conditions (Item))
Regrads,
Maha

Peri Unit Price 4 a Material in Grp Valuation is diff from other valuat ?

Dears,
For one of the Materials under a Plant is showing different Periodic Unit Price under Group Valuation than that of other valuations. Materail Periodic Unit Price is same in case of Legal and Profit Center Valuation but not the same in case of Group valuation.
Pls. suggest me how to correct it as to match with other valuations.
Regards,
Om

Dear,
If u understand,then only answer.
Regards,
Om

Single unit price for import purchase

hi gurus
my client is procuring material from china so over head like purchase price,custom,clearing charges transportation and insurance come into picture.then while calculating costing he distribute the overheads proportionately base on product quantity.
by adding all the costs for single unit client calculates per unit cost.
how to do it in SAP???

Many Many ways.
You do not say whether it is for costing purposes, or for purchase order purposes?
On PO you would add all costs using condition types. It also depends on whether you are shipping cost documents, or not, handling unit management or not.
On costing side it depends on the business requirements: Plan price is usually used as input to the costing, if more etailed is required a raw material cost estimate can be created.

Material Ledger-Periodic Unit price-Overhead cost calculation

Dear Friends,
My client using ML periodic unit pricing for reporting purpose.
Costing analysis with Standard price,I can be able to trace out how O/H would be calculated and derived into cost analysis.But with periodic unit price, the O/H figures are differnt from cost analysis with standard price.Iam unable to trace out how O/H is getting calculating in case of Periodic unit pricing.My client would like to know why the O/H rates are differnt and from where we are derving in case of periodic unit price.
Could some one tell where I can find out the configuration setting for O/H rates maintenence for periodic unit pricing.
Thanks & Regards.
Ram

HI Ajay,
Thanks for your reply.
I can find the O/H rates as you said but none of the O/H rates are matching with periodic Unit price cost analysis.
The main question was how O/H rates with periodic unit price are differnt from O/H rates with standard price ?.I greatly apprceciate for your answer.
Thanks,
Ram

Cannot change unit price for selected items in iProcurement

Hi,
I have defined an item with "List Price". Then, I create a PR in iProcurement for this item.
But I cannot update the "Unit Price" of this item as the field is protected. How can I enable the field for updating? Thanks.
(Note: If creating PR in the requisition form in Oracle Purchsing, then I can update the unit price. Why can't in iProcurement?)
Regards
Leo

What's the value of POR: Allow Unit Price Update for Catalog Items?

Unit price is not showing in SO

Dear Experts,
We have the problem with Sale Order
Some items, they are shown the unit price but are not
I check doc setting
I check price in item master
I just don't know what's going
Anyone please help !!

hI,
Check your price list assignment. If it is on BP level.
Check the price list. If the price is entered in the price list.
Check if any special price exist for that item. If it is so SAP always gives priority to special Prices.
Check form settings. If price column is visible and active.
Check form settings if any price list is assigned there. Because it takes precedence.
Thanks
Malhaar

Unit price needs to show Euro not GBP Question

Hi,
We have a Goods Receipt PO and the Unit price is showing GBP but the Total (Doc) field is in Euro. We know this is becasue the Unit Price is based on the Price List but how can we change the Unit price to show Euros ie so all the fields show Euros ?
Thank you,

Mathew
The GBP or EURO notation comes from the Price List, so if you change the GBP to EURO, it will show as EURO on all documents that use the Price list.
Robert

How do i determine a selling price for materials within a plant?

does SAP provide any std report to get the list price and the selling price for a material?

i think we are maintaining condition type for list price. I am not a functional consultant so dont have much idea. We have a new request where the customer would like to have a report to see the list price and the selling price for a material. So just wanted to find out if there is any std report available in SAP?

Unit costing for materials assigned to activity - for material cost plannin

The requirement is that material cost to the company will vary depending upon the project/customer. Eg.: Material cost = basic material cost + a % for P&F + 2 % for Clearance + a % for excise + 2 % for insurance + a % for Customs
It can be a % or a lump-sum value. It can be all the components listed or part of them. This will be project specific.
Hence the following preference for material cost planning is required:
1. Material cost based on quotation or Purchase order - If quote/PO is not available, then
2.Material cost based on unit costing done for the material in the project - If this is not available, then
3. material cost from material master depending on price indicator i.e. Std cost or Moving average price
We are working with valuated project stock.
SAP Help says"
"Prices are calculated in one of the following ways:
u2022     Using the strategy in the valuation variant
u2022     Manually, using the invoicing plan
u2022     Using unit costing"
But how to get the cost as per the priority required when these three options are there is not clear.
I have tried to work with valuation variant in the costing variant assigned to Network. No valuation strategy explicitly refers to unit costing of material.
During various testings, at times, unit costing of material gets updated as planned cost; at times not. What triggers in also not clear.
Pl. clarify
Thanks and regards
A.Saravanan

Hi All
I have psoted to service market place and got the reply; we have implemented also.
there were 2 suggestiosn:
1. Valuation price with user exit - (EXIT_SAPLCK21_002) - This user exit has to be implemented; we have implemented - it is working. But this is taking effect when overhead calculation is done - this we rae managing that way now
2. Alternatively you can try to use BAdI VALUATION_CK.: This BADI is not editable by us now; SAP has not released for our editing!
The problem is solved although
There is one more clarification required:
As SAP Help documentation: -> Unit costing is used instead of strategy sequence, but not in between steps of strategy.
How to get this done ? right now we are using the strategy - inbetween steps of strategy with user exit
Thanks and regards
A.Saravanan

Mat Ledger, Per.Unit Price for materials showing wronglu in Group Valuation

Similar Messages

Maybe you are looking for