Material determination reports

Hi Gurus,
Do we have any reports for material determination?
Like how many times material determination has been used?
Thank you
ANil

Hi anil
I suppose there is no standard report for material determination .May be you may have to create user defined report through LIS.
But your requirement doesn't work with the smartforms. As we use smartforms mostly for the output determination purpose
Regards
Srinath

Similar Messages

Material Consumption Report

Hi Guys,
I have to develop a custom report intended for use by our factories and is design to give them detail information on raw materials actual usage relative to how much should have been used (standard usage) by an individual product or product group.
The column of the report that is probably the most challenging to determine by taking the BOM quantities for each product in the product group under consideration and multiplying them by the actual output achieved for the respective products in order obtain the standard usage.
I have been looking at doing the following. Substracting the fields of txn COR3(Display process order material list), from txn CORT(Process order confirmation display: goods movement). Is this the right approach.
Any screens, transactions, tables, structures for me to do this report would be greatly appreciated.
Thank you for the help.
Sumit.

Hi,
Have you tried looking at the standard material consumption report - Transaction MCRE?
Rgds.

Free goods with combination of material determination

Hi All,
I have Materil X for this free good is Y. But for material Y there is material determination with A. In this case what will happen while i am entering the material X in the sale order/
As of my knowledge freegoods don't support for any special function like BOM & vairant config. I don't know about the material det.
Please clarify this doubt.
Regards
Sunil

Hi Sunil,
You can see Material Determination and Free goods as two seperate issues.
For material X, Material Y will be a free good only when material Y is available in stock. The system will not substitute materiail Y with material A just because you have material determination configured for the same.
On the other hand, if you enter material Y on its own i.e. seperately at the line item level of the sales order..........then material determination will occur and the item will be substituted by material A.
See both of them as two seperate scenarios.
Hope its clear.............
Regards
Sai

Retail - article follow up / material determination

Hello,
I would to know the possiblity of material determination / article follow up in Retail scenario.
The material should be substituted with material already maintained for replacement/follow up for the 'sales orders'.
Help on this is really appreciated.
Thanks & regards,
Ravish

Dear Ravish,
Pls elaborate your business scenario and your SAP requirements.
Thanks,
Regards - Muralidhara

Material Ageing Report

Hi
I need the Material Ageing report as the given following requirement
1) Material With GR Date
2) The Ageing will be for 30, 60, 90, 180, 270, 360
3) Material with Normal & Special Stock
4) Material with the Split Valuation
If any one have worked on this developement then Reply

Hi,
Check the report in t.codes MC.9,MC.A,MC.B & MC.C
OR
Go for development with an ABAP report
Regards,
Biju K

Material Determination error during Transaction DP90

Dear Experts,
I am configuring the Depot Repair scenario for a Hitech Industry.
The Process is as follows;
1. Ceating the Notification
2. Creating a repair order using Notificaion. and getting the repaired items in to the plant
3. Creaing and confirming the service order and delivering the repaired product to the customer.
4. Creating a Billing Request using service order during transaction DP90.
I am facing the following error!!! -
Material Determination error in the service order line item xxxxx/xx!!!!!!
I have configured the DIP Profile YBR00099 as below.
The characteristics Activity Number, Activity Type and Cost Elemnt were given the Material Determination Check.
The source is---- " Actual Costs and Line Items " with 100 Percent, No sets are used for the source characteristics.
In the Material Determination a Blank Item is used with a Check for the field " Material Direct"
In the Material Determination Criteria for the Blank Material, it is configured as below;
Activity Type            No Set Used - No Value used
Activity NUmber        No Set Used - No Value used
Cost Element           YBR-Material-01(Set values are 608110 and   * )
Note : the above configuration was done using the Config guide AS IS.
The material that was used in the Service order is not maintained in the ODP1 transaction ---> Material Determination.. instead ,only a blank material is used and configured as above.
The subsequent Process should continue as follows;
5. After saving the billing request, two more line items are determined in the repair order.
6. Debit memo is created using the repair order. where the Actual confirmed hours of service and spare parts confirmed if any are billed for the customer.
Basically I am very much new to this RRB concept and I was facing the above error and could n't be able to proceed further.
Please help me in this regard.
BadariNath .G
Answerthink India Limited, Hyd
9989425075

Material Determination error in the service order line item
Check note 460415 and 545095
thanks
G. Lakshmipathi

Free goods determination from material determination.

Hi experts,
I have one issue for you,
My scenario is:
we issue freee goods 1:1. i configured free goods setting and maintained VBN1 (condition records for free goods). i even maintained material determination configuration settings and maintained VB11 (condition records for material determination). The problem is system proposing free goods automatically when i process sales order without material determination list, if i go through material determination list system not determining free goods nor giving any message. what is the system behaviour if we go through material sustitution list to free goods. the main item (for free goods)will be existed in the substitutiion list. plez help. any suggestion will be highly appreciated.
thanks,
sada

Hi
Please consider the two issues separately. Don't club both the issues. If you have records for both material determination and free goods.,
1. Whether the material substitution is happening perfectly (as per the records created in VB11) or not.
Next.,
2. check whether the free goods are determined for the material in the sales order line item (as per the records created in VBN1) or not.
Please check and post the result.
Sometimes the freegoods will be determined in the sales order but will not create any second line item(as sub item) because while creating the records in VBN1 if you select the option 'Free goods Inclusive without line item generation. In this case NRAB condition type will be determined instead of R100.
So, also check the conditions tab and see whether the entire quantity is priced or not.
Thanks,
Ravi

Free goods with material determination

Hi All,
I have i query that for line item A material i need to give free good as X material. But there is the material determination to that particular material X with the material Y.
In this case how the system will redetermine? As of my knowledge as per the SAP standard free goods doesn't entertain any other like BOM, and variant config.
Please let me know the answer please!
Regards
RPS

You can use transaction VBN1 for assigning free goods.
Select discount type as ZFRG.
Select appropriate key combination.
You can restrict the free goods validity using Valid on - Valid To option.
Reward points if answer is useful.
Regards,
Pallavi.

Shipping point was not determine in the order with material determination.

Hi,
I´m using material determination for my sales order, and i need to determine the Shipping point with storage location configuration. So when I add the material number, the quantity and the storage location the material determination runs and in the second line determined the shipping point it is not filled. Any body knows how can I fix this problem?
Best Regards

Hi
The shipping point will be determined on the basis of shipping condition, loading group and the delivering plant.
The storage location dependent shipping point determination is used only in delivery documents and not in sales orders (Assign Shipping Points According to Storage Location).
To activate this you must first Define Rule for Determination of Shipping Point, wherein you can assign the rule to the delivery document only and not to the sales order.
If you say that you are getting the shipping point determined based on the number of the material, the quantity and the storage location entered(though it is not) then here note that you are entering the storage location only to the material entered and not to the material determined. When the system determine the alternate material then the shipping point will be determined on the basis of shipping condition, loading group and the delivering plant as per SAP standard process.
Try by entering the storage location to the material determined and check whether you can get the shipping point or not and let the forum know the result.
Hope this helps you.
Regards
Rajkumar K

How to Differentiate between Parent & child item of material determination

Hi Experts
I have a list of material & the Business requirement is to found that whether a material is a Parent material , Child material or Both ( a parent to other children and a child to another parent).
I tried using table KONDD & KONDDP but I was not able to differeniate between Parent & Child item.
I even cant use item category to diferentaite the two as by item categairy i can only find that it is a Prent material but cant find whether this material is a Child material or not.
Is there any table in which i can enter the Parent material & the output would be child material or any other table which contain both parent & child material.
Note : In Material determination ( VB11) , the material which is entered is Parent material & the material with which it would be replaced is Child material.
Kindly Guide.
Thanks in Advance

Hi
The wording of Parent and Child sounds like using a BOM material. In material determination...these two items can be called as Material entered and material determined or Main Item and Sub Item.
In the sales order overview screen...at line item level check the field 'HLvItem' (Higher Level Item). It will show the POSNR of the main item to which this item is linked. Since this can also happen in the case of free goods and BOM...you have make another check for these items with the item category.
If the substitue material is not determined as a sub item... you can check the material number in the field 'Material Entered' in the sales tab of the item and compare the material number with that exists in the VBAP-MATNR. If both are different, then this material can be considered as a determined material.
Thanks,
Ravi

How to check the analysis of material determination in sales order

hi,
We are trying to create a sale order with material determination. Material determination analysis is on. After switching this on while adding a new line item, in an existing sales order, we are able to do analysis as the system itself takes us to analysis screen. But once the document is saved, we need analysis to be done at material determination for the determined materials , something similar to pricing or account determination analysis.Please help
Regards,
Aparna.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

Material determination-out of stock matls to be excluded from matl.subst.

dear experts,
my scenario: i´m using material substitution (reason 005 - Manual matl selectn) with Strategy "A" (substitute products are displayed for selection) - to offer several materials when user enters the material name in va01. i need to exclude materials which are currently out of stock from this selection. any ideas?
thanks a lot.

hello, Zuzana.
i believe the availability check in material determination only works with automatic selection, or selection in the background. perhaps you may need enhancements to allow manual selection only for materials that are in stock.
regards.

Regarding Material Determination and free goods determination

Hi Gurus,
I understand the Material Determination to be substitution of a new material for the old one for any possible reasons such as sales Campaign,non availability etc.
Could anyone one explain the concept whether material determination and Free good determination can co-exist in a sales order ?
How to substitute by material determination procedure for a free good in a sales order?
Regards,
S.Ravi kumar

Hi.,
We can use material determination and free goods,as per my knowledge material determination takes first and to the swapped material free goods determiination takes place
Award points if helpful
Narayana

Material Determination - quantity check in sales order

Hi everyone.
Hope all is good.
I have a doubt in Material Determination.
If I need to substitute a product in Material Determination, how can I come to know whether the quantity of the replacement material that is replacing the substitute material is available or not.
I know while creating a delivery the system will show quantity not available.
However, how we can see the result while placing a order?
Because there can be a scenario the material which is replacing the different material, we might dont have their quantity also available. So, it will be a waste to create a order and then wait for the results in delivery.
Another situation.
In MD process, what my client is looking for is
Substitute Reason- Availability
If material X does not have quantity it should be replaced with Material Y.
However if Material X has quantity, then MD should not take place. No replacement should happen.
The reason is there is a huge in and out of stock every now and then.
Do both the scenarios can be worked out in standard SAP?
Please suggest.

Hi Joan,
Thank you for the reply. I understood the subsitute reason.
But my question is We have substituted Y for X.
Now what I am asking is what if Y is also not available. Can in the order itself we can come to know whether quantity of Y is available or not instead of delivery.
Second if the subsitute reason is "quantity not available"- not in front of the system so not sure about the code. Same Y for X and now if quanity for X is available the material should not be susbtituted.
Please correct if I am wrong.
Regards

Material Determination in Sales Order BOM

Dear Gurus,
We would appreciate any solutions and/or suggestions you can provide for our problem below:
Background:
Part XYZ is a sales BOM which contains 3 components: A, B, and C. Component B has a material determination (product substitution/interchange) with material B1, B2 or B3.
Requirement:
When a customer orders part XYZ, and if component/material B is not available in stock/shortage, then any or all of the product interchanges may be used to fulfill the order until the full order quantity is confirmed.
Problem:
We are able to explode the BOM to its components but unable to generate the product interchanges for component B in the sales order.
Could you please help? Thank you very much.
Best regards,
Michael SA

SAP Note 486680
SAP Note 549341
Please check the above notes.
Regards
Sai

Material determination reports

Similar Messages

Maybe you are looking for