Material Document no. not showing FBL3N Report
Dear Friends ,
Please note i have an issue, which the Material No. not showing in Referecne Key3 in FBL3n ( GR/IR )report.
Thanks & regards
Joseph
i have get corrected as i have add special field in menu settings BKPF-AWKEY.
Similar Messages
-
While create inbound delviery Material number is not showing
Hi All,
I am trying to create inbound delivery with reference to Purchase Order.
While using BBP_INB_DELIVERY_CREATE to create inbound deliveries, the material number is not showing up in the VL33N screen but Material Description is coming.
As you have also faced same problem,can you please suggest how to resolve this issue?Your help will be highly appreciated.
Thanks
Santhu
Edited by: santosh jajur on Sep 24, 2010 12:48 PMHi,
This function module doesn't pass Material number while creating the inbound delivery. Instead you can use the function module GN_DELIVERY_CREATE along with NUMBER_GET_NEXT function module.
See line number 631 to 656 of include LBBP_SIC_40F02 (Called from Line no 18 of BBP_INB_DELIVERY_CREATE) for more details.
While using the function module BBP_INB_DELIVERY_CREATE, material number is not passed to the function module (GN_DELIVERY_CREATE) structure field XKOMDLGN-MATNR.
Regards
Vinod -
BBP_INB_DELIVERY_CREATE-material number is not showing up in the VL33N
Hi All,
I am trying to create inbound delivery with reference to Purchase Order.
While using BBP_INB_DELIVERY_CREATE to create inbound deliveries, the material number is not showing up in the VL33N screen but Material Description is coming.
As you have also faced same problem,can you please suggest how to resolve this issue?Your help will be highly appreciated.
Thanks
PriyankaHi,
This function module doesn't pass Material number while creating the inbound delivery. Instead you can use the function module GN_DELIVERY_CREATE along with NUMBER_GET_NEXT function module.
See line number 631 to 656 of include LBBP_SIC_40F02 (Called from Line no 18 of BBP_INB_DELIVERY_CREATE) for more details.
While using the function module BBP_INB_DELIVERY_CREATE, material number is not passed to the function module (GN_DELIVERY_CREATE) structure field XKOMDLGN-MATNR.
Regards
Vinod -
Documents do not show up on iCloud.
My documents will not show up on iCloud. I am just trying to upload documents from my Macbook to iCloud, nothing that resembles science fiction or that requires a PhD in computer science.. I have done everything that the help section/faq's tell me to do, still nothing shows up on iCloud. I am new to Mac but this doesn't seem to be any different than Windows... Any suggestions? Thank you.
Welcome to the Apple Community.
If you could tell us what you have done and where it's not working how it should, we might be able to help you. -
my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?
Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen -
Document is not showing up group currency in the GL line item display
Greetings,
Could you please advice me as to why document is not showing up the group currency in the line item disply, when all other document posted to that GL are showing it.
Your prompt reply will be appreciated.Hi
select screen layout and copy gorup currency field.
Hope it will work
Regards
Murali -
Appraisal document header not showing up in the Portal
when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
how can I show the appraisal document header in the Portal?
regards,
Tiberiu>
Chris Thomas wrote:
> Do you know how to set the template such that the Header is expanded (displayed) by default ?
>
> Chris
hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document. -
Date not showed when report is viewed in PDF .
Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now. -
GR slip for PO created in Material document but not printed or in spool
Hello Inventory Management Gurus,
I have a problem printing GR slip onto the printer.
I am able to create the output and can see in the material document but not in the spool or printer.
I configured GR slip printing in OMJ4, created condition record in MN21 configured in NACE etc., for the output type.
What is preventing from printing or appearing in the spool if it created the output in material document?
I have the setting "print immediately" enabled and "release after output" unchecked in OMJ4.
What is missing?
Please help.
GeorgeHi
Output for GR is Printed through T-code 'MB90".
Note - in GRN Individual /Collective Slip and Print indicator should be selected.
Enter the GRN No,Select the Output type and Execute.
Regards
Viru -
Material documents can not be printed
hi!!
I see that material documents can not be printed material in a storage, we need to
print at least the original and copies I mean to be printed two copies when you post the transaction MIGO_TR.
When performing the movement I leave the check box activated from the
printer and automatically deactivates when you post and the tx MB90 that is to reprint the documents tell me that there is no printing message
I look forward to your supportPlease check these answered links:
Print out -- MB90
Re: MB90 GRN Print
Re-print material document - MB90
GR Note Print out not comming through MB90 -
Material Documents did not capture cost centre
Hi,
There are some PGI / Material documents did not capture cost center.These vehicles are missing cost center in the PGI/Material document and i am unable to figure out why is it happening.
Can u please help me understand why the cost centre is missing ?
Would you clarify that issue.
Thanks and best regards,
pragyaif your material GL account (P&L) account are created as cost elements, you cannot post any document with out cost object. If you GR is through production order, need not assign any cost center, as production order itself is cost object. For other cost elements you can assign cost center in OKB9.
regs,
ramesh b -
Subreport dropdownlist does not show any report !!
Just finished preparing two reports, rpt1 (Master), rpt2(SubReport), each a separate report works well. after that i added subreport control to rpt1 and went to SubReport properties to add rpt2 ... but ( Use this report as subreport ) did not show
any report in list.Hi,
What happend if you write in the textbox for subreport path, the path, works? what version of Report Builder do you have?
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/ -
Document flow not showing material posted details in maint order
Dear Frnds,
In the refurbishment order document flow is not showing material posting documents. Plz guide me to correct the issue. Thanks for all your cooperation.
Guruprasad KSDear Thygarajan,
Thx for ur reply. Goods issue button is been ticked in "Define Documentation for Goods Movements for the Order". Still same issue. It is working in different client so i hope not an IMG issues.Plz give ur valuable feedback.
Guru -
Document Flags not showing on Web Excel
We are using BW3.5 SEM4.0.
Documents are added to cells in planning layouts.
Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
Is there a solution to this? Thanks for reading.
WilliamHi guys,
I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
My 4 characteristics are WBS element, version, fisc per, and material.
Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
(I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
any help is appreciated
thanks,
martin -
Hi All,
I'am facing peculair issue, We have an issue where inventory is showing in -ve.
From 2LIS_03_BF we are loading the data to DSO, from DSO again to Cube.
I can see Reocrds in Cube for a certian Plant , Storage Location and Material combinations....when I gave same selection criteria in Report the records are not shown in Report. I have checked Query designer too if there are any condition applies but there are no conditions as such expet Special Process Indicator K is excluded.
so i checked Special process indicator for that material but its not K.......its Blank.
Inorder to recover the issue, I have selectivdely deleted the material, Plant and Storage location combination and reloaded the data to cube and compreessed the request without checking No marker Update.
Please need inputs here.
SujanRHi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See some importent SAP Notes in Invventory Lods.
Note 747037 - Update of before images in ODS objects
Note 752492 - Non cumulative keyfigures are incorrectly allowed in ODS
Note 581778 - ODS capability of extractors from inventory management
Note 684465 - BWVORG for purchasing data sources
Note 417703 - Missing duplicate record during extraction with 2LIS_03_BF
Note 929378 - 2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM and BI 2004s
Note 745788 - Non-cumulative mgmnt in BW Verifying and correcting data
Note 352762 - Collective note purchasing extractors and setup
Note 353042 - Howto Activate transaction key (PROCESSKEY)
Note 352344 - Process key + reversals in Inventory Management
Note 586163 - Composite Note on SAP R3 Inventory Management in SAP BW
Thanks
Surendra Kumar Reddy Koduru
Maybe you are looking for
-
I have written about this problem before, but there have not been any successful solutions as of this date. I will explain my situation a little further and maybe someone can help. Most of the time, when I connect my iPod to my pc while iTunes is run
-
so i installed lion on my friends macbook pro and it didn't let me log into his personal username like after you turn it on it just hilghts his name and the bar to type in his password doesn't show you. so what i was thing is to back up his personal
-
IPod all screwed up/Apple Support seem to think there isn't.
My iPod randomly resets, switches songs, pauses, scrollwheel freezes/don't respond etc. Windows always reports a problem with it when I plug it in. It shows errors/freezes every time I try to format or reset it. It's been messing up like this since I
-
Syncing catalog in Lightroom 5
I have all my photos stored on an external drive connected to my office computer, which is very fast so I prefer to use it for editing. In addition to backing up all my photos offsite, I have a second external hard drive containing all my photos at h
-
I use the HDMI out to contect my Mac Mini to my HDTv, since the Mavericks update I now get a grey bar at the top of the screen (where the menu bar is) durin full screen playback. Is there a way to get rid of this? Also why does the screen switch ever