Material Document Number Range query

Hi all,
How can I create Materila Doc Number Range Groups and elements . Pls note I want to create it new one and DO NOT WANT TO USE STANDARD .
Also how can I assign or relate or link this groups to Company code or Plant
Regards
Bhushan

1. go to MMNR Transaction
2. click GROUP - change mode
3. go to menu: GROUP -> INSERT (F6)
4. maintain new group data and material number intervals
5. save
6. assign proper material types to new group.
If you want to control material number you can use enhacement:
Source: IMG help:
"enhacement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
For more information, see the documentation for the following components assigned to these enhancements:
Industry
EXIT_SAPLMG02_001
EXIT_SAPLMG02_002
Retail
EXIT_SAPLMG72_001
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMG72_002
With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
EXIT_SAPLMGNK_003"
Hope it helps.
Regards,
wojciech

Similar Messages

Material Document Number Ranges

Hello Friends,
We have a business requirement to differentiate the material document number ranges. In our process, we have intercompany and third party scenarios and the requirement is that system has to determine different number series for third party goods issue and intercompany goods issue. Currently as per standard, system deriving the unique number series for intercompany and third party goods issue since th event type is WL.
Kindly provide your inputs on how we can differentiate the number ranges.
Thanks in advance
Best Regards,
Goutham

Hi,
You could try to make it through the transaction code following the process as below:
First u need to create seperate document type in OMR4 or OBF4, then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
I hope this helps!
Best Regards,
Arminda Jack

Material document number range to matchthe accounting doucment number range

Hi all,
SRM 5.0 ECS.
We have a reqt to match the material document number range and the accounting doucment number range for goods receipts in ECC ...Is this possible???If so,how??
Thanks.

It may not workout .
Material document number range configuration should be unique other wise lot of confusion.
since material docuemnt and account documents uniquely identified by Year and Number.
some times one material number and two accounting documents can be created while doing good receipt.

Different material document number range for Services

Hi,
I want to make different material document number range for services.
I have created ZE document type from WE .
But if I see group in OMBT , i am not able to assign ZE there. How to do this?
Regards
Kedar

Hello,
No ! I am not able to see ZE there.
Kedar

Material Document Number range for 2011

Hi,
As per standard practice we need to reset the number range for material document for calendar year 2011. New Number range will be effective from 01.01.2011. Please let me know the below -
1.     Step by step process for Number range assignment for Material document (GR / GR / Transfer posting) for 2011
2.     Can we define Material document number rage financial year wise (Apr to Mar) like other FI documents number range? This issue is raised by finance dept. IF yes what will be the process?
At present Number range assignment for our company is showing Year as 9999, from number 5000000000 and to number 5000000000
Whether it is mendatory to re-ser number range.
Thanks,
Ranjan Kumar
Edited by: Ranjan.pearl on Dec 29, 2010 2:51 PM

Number ranges for Material document are maintained in OMBT.
But there is no need to maintain different number ranges for material document as same as financail document. Financial documents are year based whereas material documents are not.
Also if you are maintaining the material document number ranges as per year specific, then also same document number cant be used. But in case of financial document, the document number can be same i.e year specific.
Different number ranges for Material Document :-
Then assign the specific interval for a specific year like
Year      From Number           To Number
2001      0100000000     0199999999
2002      4900000000     4999999999
2003      5000000000     5999999999
2004      0200000000     0299999999
Still any queries, revert back.

Material Documents number range

Can set number range for Material documnets as a year dependent ?
How to set it?
In our system I am not able to set new number range for the new Fiscal Year . There are predefined number ranges . with validity year 9999. and year field displays gray . Also there is no optin for new entries
I need new number range for new current fiscal year .
Pls help . If possible in some detailed way

Hi,
Go to OMBT, click on Group in change mode, select the material doucment which you want. Then click Shift + F5, then select the line which shows year as 9999, then click F6. Now specify the year & give the number range interval as per your need.
Save & then transport the number range to your production system.
Regards,
Vivek

Material Document Number Range

Hi,
What is the meaning of setting number range as
Year    From Number    To Number     Current number
9999    4916000000       4916999999   4916568199
My understanding is we do not need to set sepeate number for every year once we set 9999. Is that right ?
Thanks in advance.
Gopinath

Dear Gopinath,
Yes , your understanding is 100% correct .
we can configure number ranges as year depenedent and year
independent
if we are using year-dependent number ranges
that you specify same year by year.
01 2008 0100000000 0199999999 100000201
01 2009 0200000000 0200000203 200000000
But when we specify it as year independent , it looks
as below.
01 9999 0100000000 0200000203 100000203
Regards
Vijayesh V V

Material document number's range issue

Dear Friends,
We are facing Material document number's range issue i.e. For year 2010, 5000202085 number does not exist but higher number 5000202691, 5000203284 exists in system.
why the number 5000202085 is missing?
I checked in the system for relevant setting at tcode OMBT with year 9999 are okay.
Can you pls help me in getting it resolved?
Rgrds,
Pradeep Jain

I had the same question so I searched, that should always be the first step before posting a question.
No points to me please as this answer is not from me!
Search results show:
Answer from: Mauro Bianchi (SAP moderator)
This issue with the internal number assignment occurs due to bufferingin the application server. Buffering increases the performance of theserver and documents don't loose their properties. Nevertheless, it may cause gaps in the internal number assignment and sometimes the numbers may not be chronologically assigned. As I stated before, this won't cause inconsistencies in the system and is usually not an inconvenient, unless you require sequential number assignment in your documents due
to legal reasons. In this case, you'll have to disable buffering in the application server.
in order to disable buffering Just access transaction SNRO and enter the Object type MATBELEGhttp:// Number Range for Material and Phys. Inventory Document In change mode, in the menu bar, please, follow the path:
Edit -> Set-up buffering -> No buffering
Check note 62077 which describes this issue in detail

Need material document number

Dear all,
I have an issue. Inorder resolve it i need run a run aset up in OL1BW using the material document number.
I have the process order, period, plant and material, but i need to find the corresponding material document number. Can anyone help me how to proceed further?
The datasource is 2lis_03_BF.
Pls also diferntiate between material and materail document number.
Thanks..
Regards
Santhosh Kumar N

The source for 2LIS_03_BF, as Arun pointed out, are R3/ECC tables MSEG and MKPF.
Material - Refers to the material number, or part number, that is being managed. Typically, the material on an R3/ECC system is an 18-byte generated number to identify it to the system and has an industry accepted part number (Manufacturer Part Number) as a conversion exit so that you can enter either on R3/ECC and get the correct material number.
Material Document - Refers to the internal document used for tracking the movement of a material. Examples of material movements would be goods receipts and goods issues. MKPF is the Material Document header table and MSEG has the Material Document line items.
To find the Material Documents, you're going to have to query the MKPF table in your R3/ECC environment to get the document ranges needed for the setup jobs that you plan on executing.

Material doument number range

Hi All
in our SAP system we have 2 company codes but material doument number range is same for both the company codes . how to set it at company code specific and / or Plant specific?
I have checked with T code OBH1 but it is related to FI doc types only. I need number range for material doument not for FI documents.
As per requirement from client - it is needed for easy traceability and audit purpose.
Is there user exit available for this ?
I dont understand why SAP has not provided this as a standard . Because practically every company or even plant needs different number range , for easy traceability and if any audit will go on auditor will like to see documents in sequence .
Hope u understand the issue .
Bhushan
Note : I have posted the similar query earlier but there was not much satisfactory replies. and some one has posted reply to check with T code OBH1 . But its not useful

Hi,,
GR document Number ranges are Clent specific and Yearly we need to maitain.
As per the standard SAP is concern we can't go for Company code specific.
But in many big client like ABB they have gone with a big development for this activities.
so convince the Client for the feasibility and extra cost invoilvement in the Making this big development using ABAP, and some Userexits.
We can't make any alternative solution using SAP standard settings for this requirements
with regards
Shrinivas gangoor

How to fetch accounting document number from known material document number

Hi,
Using MIGO transaction, by giving mblnr(material document number) as input, I get accounting document number by clicking FI document.I have to add this accounting document number in my report for corresponding known mblnr(material document number) values.
My question is how to fetch the accounting document number present in MIGO to add in my report program.
I used the xblnr(Reference Document Number) which is present both in mkpf and bkpf tables to fetch values.
I extracted xblnr values with known mblnr values from mkpf (Header: Material Document table).
and then extracted belnr(accounting document number) from bkpf (Accounting Document Header table) by using xblnr values.
But the query is running for a long time.
Is there any other method to extract the values in a simpler way.
Kindly advise.
Thanks and Regards,
Sanjeev

I had the values of xblnr and some other fields such as mblnr, budat etc in wi_item table.
I created a new internal table i_xblnr and got down those values.
And then created a new internal table i_belnr and tried to get values of belnr in it.
The code I wrote is given below:
IF not wi_item[] is initial.
loop at wi_item.
   at new xblnr.
    ws_xblnr-xblnr = wi_item-xblnr.
     append ws_xblnr to i_xblnr.
   endat.
endloop.
select belnr xblnr from bkpf into table i_belnr for all entries in i_xblnr where xblnr = i_xblnr-xblnr.
ENDIF.
Kindly look after it.Thank you.
Regards,
Sanjeev

Material document number to match the FI document number

Hello MM Gurus,
May I know if anyone here has encountered a requirement where the material document NUMBER generated from goods movement (GR, GI) should have the same NUMBER with the FI accounting document generated with it? I tried to match the number ranges initially but this would only apply to 1 company code.
Are there user exits here that I can use?
Regards,
Marvin

Hi
You can create Number ranges for each year in OMBT transaction.
regards
Srinivas

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

Document number range - per fiscal year and continuous

Hi Experts,
In document number ranges, generally the FI dox have number ranges which start afresh every year whereas MM and SD dox have continuous number ranges over the years. It is possible to have continuous number range for FI dox also, but not many people use this.
Why this differenciation between FI and SD/MM? Why SD/MM also do not have fiscal year based number ranges?
Also, where do we define that doc range will be year specific or not? or is it SAP standard that FI will be year specific and SD/MM will be continuous?
Thanks and Regards,
Sadhana

HI Sadhana
You have the option to have document rumber ranges either on fiscal year based or upto 9999 year.
This can be done in FBN1.
for posting material documents also above situation applies.
normally everybody prefer to have fiscal year based number range as FI documents are more in number.
You can go through other forum members solution also
Regards
A Chandrasekaran

Material document no. range

Hi experts,
For outbound delivery, there's a material document no. range after PGI or reverse PGI. Where are this no. range defined?
Pls advise. Thx.

Cathy,
Material Doc number ranges are defined in OMBT. The path is IMG>MM>Inventory Management and Physical Inventory>Number Assignment>Define number assignment for material and phys inv docs.
Regards,
DB49

Material Document Number Range query

Similar Messages

Maybe you are looking for