Material download issue due to Lexicographical setting mismatch in CRM &ECC

Hi All,
We are facing material download problem due to Lexicographical settings.
In ECC, 'Save Lexicographically' is checked and maintained. While in CRM it is not maintained.
Now, we have aroung 10,00,000 materials in production system, and now we are facing problem with numeric material with leading zeros in replication from ecc to crm.
Please suggest what should we do.
If we maintain the setting now in CRM, what will be the impact on existing material and transaction data in crm.
Any sap note, with which we can maintain same setting as of ECC in CRM, and earlier data will also be valid.
Please help.
Regards,
Dhanraj Dange

Hi
1. In CRM, the transaction COMCPRFORMAT ( for Defining Product ID Settings ) has the settings for 'Save Lexicographically' as inactive then....
With nonlexicographical storage, the product IDs 123 and 0123 refer to the same product, that is, the leading zeros are meaningless. Both product numbers are stored in the database as 0000000000000000000000000000000000000123 and are thus identical.
2. But if In R3, the corresponding transaction OMSL has the settings for 'Lexicographical' as active then these 2 products will be considered as seperate products....
Reward if helpful
Regards
Manohar

Similar Messages

Material download issue

Hello Experts,
I am facing typical material download issue, please help me out to overcome this:
- material number in ERP has lot of speical characters say e.g. - : =
- DNL_CUST_PROD0 / PROD1 / PROD 3 / TAX all has bee done
- Materials are already downloaded
- When I tried to download new materials from ERP to CRM(missing) I am getting error: as "Mat. for Initial Download: Function table not supported" ; additionally I am also getting tax sequence for country CA, but in ERP no tax classification maintained for CA for particular material. Also no data available in TSTL, TSKD etc..tables.
Pleas let me throw your thoughts here.
Cheers,
Bobby

Hello Bobby,
Corrections present in note:1121999 was due to program error.
Did tax customizing error still present?Did you run txn:CRM_TAXCUST_VALIDATE.
Check the error tab of the Bdoc and see can you get any hint?Also,does the BDoc contains Data or its blank?
Its very difficult to know the cause unless having look into the system and debugging the issue,
Regards,
Shanthala Kudva.

Material Download

Hi,
We are downloading the Materails from R/3 to CRM.
We have created a set type and attached that to material category.
We are populating a data from R/3 into that set type.
PRODUCT_CUSTOMER2 is the BAdi which is implemented. This works fine when there is a delta.
i.e when we change some thing in R/3 and it gets replicated correctly.
But doesnt not when we are doing a initial download.
Any specific reason why this behaviour.
Thanks.
R

Hi,
OLD MATERIAL number is not included in the standard material download. There is no standard field on CRM product master to support R/3 OLD MATERIAL number. To download the OLD MATERIAL number, you need to create a new field on CRM product master and then extend the middleware to transfer this new field
<b>Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

[8i] ORA-12704: character set mismatch (and other issues)

I've been trying to put together sample data on this problem since Friday, but I'm having issues. I'm thinking the problem is something specific to the old database I'm trying to work in:
BANNER
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
PL/SQL Release 8.1.7.2.0 - Production
CORE    8.1.7.0.0       Production
TNS for HPUX: Version 8.1.7.2.0 - Production
NLSRTL Version 3.4.1.0.0 - ProductionI tried copying over all the data into my test database:
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionAnd, I can't duplicate the problem there. In fact, I ran my original query in my test database, using the db llink, the query ran just fine.
But, I tried to create some sample data anyway to try to get some help here, so, I created 3 tables in my test database as SELECT from the old database (via a db link).
One table was really the results of a query (with many sub-queries) that was working just fine in the old database. It was the 2nd highest level query that wasn't giving me any problems. (Below, in my query, subquery 'a' runs just fine in the test database also; it's only the top level query that gives me an error.)
The other two tables I created were just simple sub-sets of the original tables in the old database.
I ran my query in my test database against those tables, and again, it ran just fine. No character set mismatch error.
So, based on the tables from the old database, I created the following test tables:
TEST TABLE DEFINITIONS
CREATE TABLE     test_inv_1
(     cust_id          CHAR(10)
,     item_id          VARCHAR2(32) -- becomes 96 if I create as select
,     match_item_id     CHAR(10)
,     docdate          DATE
,     tot_amt          NUMBER(5)
INSERT INTO     test_inv_1
VALUES('C1000','I0001','I0001',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
INSERT INTO     test_inv_1
VALUES('C1000','I0002','I0002',TO_DATE('01/05/2011','mm/dd/yyyy'),1050);
INSERT INTO     test_inv_1
VALUES('C1000','MANUAL ADJUSTMENT','MANUAL ADJ',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
INSERT INTO     test_inv_1
VALUES('C1001','I0003','I0003',TO_DATE('01/01/2011','mm/dd/yyyy'),500);
INSERT INTO     test_inv_1
VALUES('C1001','OTHER ADJUSTMENT','OTHER ADJU',TO_DATE('01/01/2011','mm/dd/yyyy'),50);
INSERT INTO     test_inv_1
VALUES('C1001','M123','M123',TO_DATE('01/10/2011','mm/dd/yyyy'),150);
CREATE TABLE     test_btab_1
(     billing_id          CHAR(10)     NOT NULL -- becomes 30
,     payment_terms_cd     CHAR(3)                -- becomes 9
INSERT INTO     test_btab_1
VALUES ('I0001', '01');
INSERT INTO     test_btab_1
VALUES ('I0002', '01');
INSERT INTO     test_btab_1
VALUES ('I0003', '02');
INSERT INTO     test_btab_1
VALUES ('M123', 'COD');
INSERT INTO     test_btab_1
VALUES ('I0004', '01');
CREATE TABLE     test_tabm_1
(     record_type     CHAR(4)          NOT NULL     -- becomes 12
,     record_key     CHAR(10)     NOT NULL     -- becomes 30
,     numeric_1     NUMBER(15,5)
,     numeric_5     NUMBER(7)
,     numeric_6     NUMBER(7)
INSERT INTO     test_tabm_1
VALUES ('LOCA','A1234',NULL,NULL,NULL);
INSERT INTO     test_tabm_1
VALUES ('TERM','01',2,10,30);
INSERT INTO     test_tabm_1
VALUES ('TERM','02',0,0,45);
INSERT INTO     test_tabm_1
VALUES ('TERM','COD',0,0,30);Again, the first table, test_inv_1, is an example of the results of a query that was working just fine in the old database. (There are comments in the table definitions above--I'll explain those in a bit.)
Here is the query I ran against this data:
QUERY
SELECT     a.*
,     1 - (t.numeric_1/100)          AS amt_pst_disc
,     a.docdate + t.numeric_5 - 1     AS disc_end_date
,     a.docdate + t.numeric_6 - 1     AS duedate
FROM     (
     SELECT     ic.*
     ,     CASE
               WHEN     b.payment_terms_cd     IS NULL
               THEN     CAST('03' AS CHAR(10))
               ELSE     CAST(b.payment_terms_cd AS CHAR(10))
          END                         AS pay_term
     ,     CASE
               WHEN     b.payment_terms_cd     IS NULL
               THEN     'Default Payment Terms'
          END                         AS pt_flag
     FROM     test_inv_1 ic
     ,     test_btab_1 b
     WHERE     ic.match_item_id     = b.billing_id (+)
     ) a
,     test_tabm_1 t
WHERE     a.pay_term     = t.record_key
AND     t.record_type     = 'TERM'
;In the old database, I get the error:
WHERE   a.pay_term      = t.record_key
ERROR at line 107:   --this is actually line 22 in the above query, since test_inv_1 represents the results of a sub-query
ORA-12704: character set mismatchIn my test database, in every form, including with the sample data above, I don't have any problems.
I unfortunately don't have a v8 test environment, and I suspect there aren't many people who actually do, anymore, so using my v10 test database is the best I can do to come up with test data...
The other odd thing I noticed is that when I DESC the tables I created in my test database via SELECT statements, and compare them with the tables I created from CREATE statements (based on the table descriptions I got from the old database), some of the data lengths don't match up. That's what's in the comments in my table definitions. I noted where the tables I created via SELECT statements had different data lengths. I'm not sure if it's important or not, but in case it is, I thought I'd include it.
Also, I'm creating this query to make a report for someone else, and the reporting system only has access to the v8 database, not my test database. So, I'm stuck making the query run against it.
Any help on this would be greatly appreciated!

I think it has something to do with my CASE statement. I found a kind of work-around solution. Instead of getting payment_term_cd associated with the item_id, the person I'm creating the report for wants the payment terms associated with the cust_id. Now, btab has the one associated with item_id, and not every item_id is in the btab table, so in my query, I was assuming a default value of '03' when it didn't find a payment_term_cd (i.e. it was NULL) for an item_id, which is what my first CASE statement is doing.
However, every cust_id definitely has a payment_term_cd associated with it (in another table I did not provide sample data for, since I didn't know I'd need to use it). Here's the general idea of that table:
CREATE TABLE     test_cust_1
(     cust_id               CHAR(10)     NOT NULL
,     payment_terms_cd     CHAR(3)     --while it's not specified as NOT NULL, there are no NULLs for this column. I think anything that would be NULL, the system initializes as '***'
INSERT INTO     test_cust_1
VALUES ('C1000','01');
INSERT INTO     test_cust_1
VALUES ('C1001','03');
INSERT INTO     test_cust_1
VALUES ('C1002','COD');So, there's no need for me to do a case statement. I can get away with something like:
SELECT     ip.item_id
,     ip.docdate
,     ip.cust_id
,     ip.tot_amt
,     ip.pay_terms
,     t.record_key
FROM     (
     SELECT     i.item_id
     ,     i.docdate
     ,     i.cust_id
     ,     i.tot_amt
     ,     CAST(c.payment_terms_cd AS CHAR(10))     AS pay_terms
     FROM     test_inv_1 i
     ,     test_cust_1 c
     WHERE     c.cust_id     = i.cust_id
     AND     i.tot_amt     <> 0
     ) ip
,     test_tabm_1 t
WHERE     t.record_key     = ip.pay_terms
AND     t.record_type     = 'TERM'-- edited out the incorrect results
Anyway, when I used this new table with my original query in the 8i database, I didn't get a character set error, so that's why I think it has to do with the case statement.
Edited by: user11033437 on Aug 22, 2011 1:43 PM -- fixed an error in my results

IE8 excel download issue

Experts,
I have a exportCollectionActionListener to download table data in excel format. The issue is when i try to download in IE 8, i get the security message by internet explorer and the download doesn't happen. Any ideas on this ?
Partial submit is set to true on the commandButton
thnks
Jdev 11.1.1.5

i get the security message by internet explorerI don't know what "the security message" is - perhaps it is saying "file download blocked due to security restrictions?"
You cannot in your code bypass the security restrictions set by the browser - if you could, then you can probably make a nice illicit living as a virus writer.
John

How to check how many Material Download from R3 to CRM for 1 sales area

Hi Guys
Thanks in advance.
We are having CRM 5.0 Implementation. In our organization landscape we are having R3 system as well.
All the master data for CRM comes from R3. We are performing the initial download of materials on the basis of Material Type , Sales area.
For Example In R3ac1 T-Code
We have set up filters for "Material" object in such a way that middle ware should allow flow of materials of
material type = xyz
Sales org = 1100
Devision = I0
D.Channel = XX
My filters condition's are working fine.
Now after running the initial download I am want to cross check in CRM ,
How many materials got downloded for material type "XYZ" & for particular sales area "1100"?
Please let me know if there is any table for the same ?
or
If there is any standard report program ?
Thanks & Regards
Abhay Newaskar

Hi Rupesh
The information & Z report is really helpful. But unfortunately its not solved my issue .
In table CNCCRMPRSAP004 there is no entries in my CRM system.
but when I open an Product In COMMPR01 table & go to Sales & Distribution channel tab. Then I can see that this product is available in two salea area.
For example
Product ID : REPAIR-NOWARRANTY
In Tab SAP BASIC data following info available
Category ID : MAT_ZERV
Item Category group :ZERV
In Tab Sales & Distribution
we can see that this product is extended to two sales area.
1206
1290
Now I want to run a report on the basis of following selection
Sales area = 1206
Item category Group = ZERV
Then the report should show me the above product used for example.
Thanks & Regards
Abhay

Character set mismatch in copying from oracle to oracle

I have a set of ODI scripts that are copying from a source JD Edwards ERP database (Oracle 10g) to a BI datamart (Oracle 10g) and all the original scripts work OK.
However I have mapped on to some additional tables in the ERP source database and some new BI tables in the target datamart database (oracle - to - oracle) but get an error when I try ro execute these.
The operator log shows that the error is in the 'INSERT FLOW INTO I$ TABLE' and the error is ORA-12704 character set mismatch.
The character set for both Oracle databases are the same (and have not changed) the main NLS_CHARACTERSET is AL332UTF8 and the national NLS_NCHAR_CHARACTERSET is AL16UTF16.
But this works for tables containing NCHAR and NUMBER in previous scripts but not for anything I write now.
The only other difference is that there was a recent upgrade of ODI to 10.1.3.5 - the repositories are also upgraded.
Any ideas ?

Hi Ravi,
yes, a gateway would help. In 11.2 Oracle offers 2 kind of gateways to a SQL Server - a gateway for free which is based on 3rd party ODBC drivers (you need to get them from a 3rd party vendor, they are not included in the package) and called Database Gateway for ODBC (=DG4ODBC) and a very powerful Database Gateway for MS SQL Server (=DG4MSQL) which allows you also to execute distributed transactions and call remote SQL Server stored procdures. Please keep in mind that DG4MSQL requires a separate license.
As you didn't post which platform you're going to use, please check out On "My Oracle Support" (=MOS) where you'll find notes how to configure each gateway for all supported platforms - just look for DG4MSQL or DG4ODBC
On OTN you'll find the also the manuals.
DG4ODBC: http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12070.pdf
DG4MSQL: http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12069.pdf
The generic gateway installation for Unix: http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12013.pdf
and for Windows: http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12061.pdf

How do I return to iCLoud a playlist of 80 songs that I downloaded from iCloud to my MacBook? I only need the songs downloaded temporarily due to no WiFi. I want to keep the playlist in iCloud; just don't want them downloaded

How do I return (to iCloud from MacBook Pro) a playlist of 80 songs that I downloaded? I only needed the songs downloaded temporarily due to no WiFi. I want to keep the playlist in iCloud; just don't want them downloaded. I know how to delete songs, but is there a way to just "undo" and return songs to iCloud and maintain existing playlist on MacBook?

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

Mountain Lion Upgrade causing issues due to hard drive fault

I have a question about Mountain Lion crashing your hard drive. I upgraded my Macbook Pro 13' several weeks ago afer the release of Mountain Lion. The download took sometime before it completed it's download and completed without incident. Since that time I've had no issues with the softward update, my hard drive or computer.
However yesterday evening I went to use my computer and the screen after the Apple logo disappeared showed a circle w/a line thru it and turning gears just below it. After reading several forums and posts it seems that the computer cannot find a bootable disk to load up from. I do not understand this as I not changed the HD and the computer was working fine just the day before.
I tried to do a reinstall of the original OSX system (snow leopard) - it did download but after the computer re-started the system went back to the same screen w/the circle and line thru it. I then restarted computed hitting options to take me into the recovery / disk utility. From their I tried to verify and repair the HD - still same problem (circle w/line), I then just tried to reinstall Mountain Lion (same results).
WTH is going on - this was a perfectly good computer working fine & now I cannot get it to boot up or run at all? Could this be a software issue due to Mountain Lion or simply a bad HD? Any advice on how best to correct this issue would be appreciated. I use my laptop for dj'ing and have an upcoming gig in 2 weeks. HELP...

Heres the problem im having maybe it is similer
System MAC Book Pro Mid 2012 Dule hard drives 150 GB SSHD 500 GB in alternate slot
Updated Firm ware
Computer booted successfully
entered password computer reacted normaly color adjusted for my user settings
computer beeps repeatedly untill forsed shut down
reinstalled Lion worked fine again
updated to mountan lion
computer atempts to boot from the SSHD and fails
Boots to system diagnostics primary hard drive is invisable to the system
waited about a week
booted my system (at a new location)
Primary hard drive reapeared
Boots to system diagnostics
reinstalled Lion worked fine againupgraded to mountan lion again to test a theory
computer atempts to boot from the SSHD after instalation and fails
Boots to system diagnostics primary hard drive is invisable to the system
So its Back to Square one any thoughts coments or general advice?
- Thanks

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
    ORA_NLS33
    NLS_LANG
Parameters in the initsid.ora file:
    HS_LANGUAGE
    HS_NLS_DATE_FORMAT
    HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
   ... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
                  select status_code                  -- Oracle VARCHAR2(30)
                  from   ora_app_interfaces
                 UNION
                  select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
                  from   SqlAppInterfaces
   Example workaround that I'm avoiding:
                  select status_code
                  from   ora_app_interfaces
                 UNION
                  select CAST("StatusCode" as VARCHAR(30)) as status_code
                  from   SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
   A line of code in the procedure that compiles correctly but fails to execute:
           -- Insert into SQL Server from Oracle
           insert into PatientMedRecNum (
              "PatID",         -- SQL Server INT
              "MedRecNum",     -- SQL Server NVARCHAR(11)
              "Hospital")      -- SQL Server NVARCHAR(30)
           values (
              pi_pat_id,       -- Oracle NUMBER
              pi_med_rec_num, -- Oracle VARCHAR2
              pi_hospital);    -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!

Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info:        0
capno:3042, context:0x00000000, add-info:        0, translation:"42"
capno:3047, context:0x00000000, add-info:        0, translation:"57"
capno:3049, context:0x00000000, add-info:        0, translation:"59"
capno:3050, context:0x00000000, add-info:        0, translation:"60"
capno:3066, context:0x00000000, add-info:        0
capno:3067, context:0x00000000, add-info:        0
capno:3068, context:0x00000000, add-info:        0
capno:3069, context:0x00000000, add-info:        0
capno:3500, context:0x00000001, add-info:       91, translation:"42"
capno:3501, context:0x00000001, add-info:       93, translation:"57"
capno:3502, context:0x00000001, add-info:      107, translation:"59"
capno:3503, context:0x00000001, add-info:      110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
3 DECIMAL N         22         22 20/ 0    0   0   0 InterfaceID
12 VARCHAR N         60         60 128/ 30 1000   0 440 TableName
4 INTEGER N          4 4   0/ 0    0   0   0 TableID
12 VARCHAR N         60         60 128/ 30 1000   0 440 StatusCode
91 DATE N         16         16 0/ 0    0   0   0 StatusTimestamp
12 VARCHAR Y        800        800 129/144 1000   0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08

Is following message due to 'Java' setting left unchecked? Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

Is following message due to 'Java' setting left unchecked?
Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

Man that is an ancient message.
The last time I saw that was using Mac clients connected to a Microsoft (Windows) Server running 'Services for Macintosh' which included the ability to act as an AppleShare compatible file server. Because Microsoft have a different security system for defining accounts which includes the 'domain' as well as username, the standard Mac AFP client did not know how to send that information.
Therefore Apple made it possible to installed a plugin in the form of a UAM or User Authentication Mechanism which added the ability to send this information to login to the fileserver.
See http://support.microsoft.com/kb/101747
However Microsoft have long discontinued 'Services for Macintosh' and now the only way for a Mac to connect to a standard Windows Server is via SMB not AFP. I don't believe this plugin is available to download anymore.

Ssrs and script from was blocked due to mime type mismatch

Hi
I'm trying to add a script to my header on my SSRS report. I've been following this link:
http://blogs.infosupport.com/reporting-services-javascript-injection/
I get error stating:
SEC7112: Script from http//####/HCCReportsServer?/ReportsLibrary/script.js was blocked due to mime type mismatch
My code:
="<a href=""javascript:eval(unescape('function addScript(scriptFile){var head = document.getElementsByTagName(\'HEAD\')[0]; var script = document.createElement(\'script\'); script.setAttribute(\'language\', \'JScript\'); script.setAttribute(\'type\', \'text/Javascript\'); script.setAttribute(\'src\', scriptFile); head.appendChild(script);} addScript(\'http://dc1-sqlrs-d02/HCCReportsServer?/ReportsLibrary/script.js\');'))"">inject</a>"
Please help. This is urgent to get it working for a demo.
Thanks

Hi Sunette,
Based on my understanding, you come across an SEC7112 error when you inject JavaScript into the Reporting Services.
In your scenario, you should remove the below setting in the web.config file(Location: C:\inetpub\wwwroot\wss\VirtualDirectories\<your port>).
<add name="X-Content-Type-Options" value="nosniff" />
As we tested in our environment(SQL Server 2012,SharePoint 2013,IE 11), we can inject JavaScript successfully. Please refer our test steps and results:
1. Delete “X-Content-Type-Options" with value "nosniff" within the web.config file (Location: C:\inetpub\wwwroot\wss\VirtualDirectories\80).
2. Design the report as below, then deploy the report to the SharePoint site.
3. Create the script.js file with code below, and upload to the SharePoint site.
function test()
alert("The CHANGEME textbox will actually change…");
//var doc = window.frames[1][1].document;
var el = document.getElementsByTagName('span');
for (var nr=0; nr<el.length; nr++)
if (el[nr].innerHTML == "CHANGEME")
el[nr].innerHTML = "I FEEL LIKE A CHANGED TEXTBOX";
4. Run the report. Click the “inject”->”test”, the final results should look like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Acrobat Installation Issues due to Computer Switch

My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
How do I get acrobat re-installed without the "you don't have a license" error message.
I am on a subscription plan
P

licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
Damariscotta, ME518.859.1944 (cell)
From: RahulTyagi4you <[email protected]>
To: Peter Collopy <[email protected]>
Sent: Sunday, March 1, 2015 5:30 AM
Subject: Acrobat Installation Issues due to Computer Switch
Acrobat Installation Issues due to Computer Switch
created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

'Download Error' due to 'Unable to reach Adobe servers'.

I am getting a 'Download Error' due to 'Unable to reach Adobe servers'. I have already reconnected and disconnected my internet, and nothing has changed. How can I fix this problem? If anyone can help, I would truly be grateful. Thanks!
- Bobby Bobface

Not really a Premiere Pro problem, so moving this to the Downloading, Installing, Setting Up forum.
Re: Receiving error stating not able to access the Internet in Adobe Download Assistant

Lexicographical Setting

Hi,
I'm working on a global implementation with several R/3 systems and a single APO system. The new R/3 system will have the lexicographical setting flagged on and the other systems have lexicographical turned off. The business want to move to having the lexicographical setting on. All systems have shared products and are on the same Business System Group.
Where the lexicographical is off in an R/3 system and on in the APO system numerical products are failing in the CIF. Is there a user exit or other solution to work around this?
Kind regards
Michael

Hi Michael,
In R/3, the lexicographic setting will be done in spro>logistics-general>material master>basic settings>define output format of material numbers. In APO, it is done at spro>APO>Master data>Product>specify output format of product numbers.
Check for enhancement APOCF005 under function module EXIT_/SAPAPO/SAPLCIF_PROD_001
Regards
R. Senthil Mareeswaran.

Material download issue due to Lexicographical setting mismatch in CRM &ECC

Similar Messages

Maybe you are looking for