Material Lock - Reg
Hello Mates.,
how to find a material is locked or not that is material used by another user or any other transcation.
This is because i am writing BDC for co11n where there is requirement of above mentioned case .
while making entrying the manual production order confirmation error is getting triggered - Material is locked.
Regards,
Murugesh R
Hi,
Check whether the material is locked by the lock object.
Call the function module ENQUEUE_EMMARAS with the material number.
Incase the material is locked by some user you will get the error message from the FM.
Regards,
Ankur Parab
Similar Messages
-
Any Material locked for transactions due to errors in Material Ledger?
We are implementing Material Ledger for actual costing purpose. After ML implemention, will there be any situation due to errors in costing run, or otherwise, that the material is locked for any further transaction? Is such kind of threat exists under any situation?
SanjayDear Sanjay,
I don't think you will face any problem after succesfully completion of actual cost run.
Situation can be totally opposite...I mean to say while costing run you might face problem of material locking.
There could be problem if transaction in material is happening and same time cost run is going on. or if cost run is going on and the same time somebody is trying any transaction.
It is always suggested to run cost cycle in the night or lock the user id's while cost run.
Regards
Rupesh Kumar Singh -
Regardig material locking by another user
Dear Friend,
when i have done production entry by mfbf at that time there is another user for same material then there is error shown that material locked by that user
is there is any customising to eliminate this type of situation
at time of entry also to reduce time entry time
i know SM12 but my user have not authorisation of that t/code
thanks in advance
regards,
nilDear,
Checck the settings in transaction OMT0.
This controls the lock used on materials. It can sometimes be set to be TOO safe and therefore lock everyone when it is not necessary.
There are different ways to do this.
1. First request user to logoff and try login again.
2. Check SM04 list and run session for that user.
3. Try to delete lock , SM12 transaction.
OR,
Go to SM50, Select the process.
Go to menu Program/Session>Program>Cancel.
Regards,
R.Brahmankar -
How to handel material locking in WM
Dear Experts
Our warehouse is managed by warehouse management and we face a problem when one of the stock keepers post goods issue with reference to sales order from the warehouse while another on is performing a goods receipt at the same time and the same batch the system issue the following message
Batch xxx of material y is already locked by user
Message no. M3682
Diagnosis
You want to process a batch that is already being processed by another user.
System Response
A batch cannot be processed by more than one user at the same time. To prevent data inconsistencies, the batch record is locked for processing.
And this locking cause a delay to our work
So is there any way to solve this problem in the warehouse management so that the 2 stock keepers can do their work in the same time without locking
Best Regardsyou check Note: 1949813 for Message M3682 "Batch & of material & is already locked by &" in transaction MIGO, VL32N and VL02N.
Solution:
Both BAdIs have to be implemented and must be active
BADI MATERIAL_READ method LOCK_BATCH_MASTER
BADI BATCH_MASTER method LOCK_BATCH_MASTER_IN_MIGO
Step 1:
go to OMJI to Activate late lock for goods movement
step 2 assign Methods
Activate BADI BATCH_MASTER for method LOCK_BATCH_MASTER_IN_MIGO
method IF_EX_BATCH_MASTER~LOCK_BATCH_MASTER_IN_MIGO.
C_LOCK_MODE = 'S'.
endmethod.
Step 3:
go to SE18 Activate BADI MATERIAL_READ for method LOCK_BATCH_MASTER
after that test 3 user make goods movement for the same batch, same plant and in the same time you can post goods movement Successfully.
Test Goods movement through MIGO, VL32N and VL02N, all user post Successfully.
http://solveissue.com/note?id=1949813
for More information Contact me
Mobile: 00201003222213
Mail: [email protected]
Skype: Eng.abdallah.elgibaly -
Hi,
When i tried to upload material master data through Idoc (ARTMAS). But i am getting the following error
*If the field is the material group or unit of weight, and the field is
not ready for input, check whether the material is locked. If it is
locked, you cannot extend the Purchasing view or the Sales view. If
either of these views needs to be extended, the material must first be
unlocked. This can be done only by a user with special authorization.
Contact your system administrator.*
i have the checked the configuration for "Define Lock-relevant charecteristics" all the fields are unlocked. still i am getting the same error.
can someone pls help me??
thanks
manirajcheck the material master for locks.
If you have the necessary authorization, the option Lock material (or exceptionally Unlock material) appears in the status bar in material master maintenance. A material that has been locked is indicated to all users by the icon Material is locked. It is also possible for all users to display which fields have been locked.
maybe you had customizing in place, then locked the fields in a material master, and later removed customizing.
you have to have authorization for authorization object M_MATE_MAF to unlock the locked fields in MM02. -
Vendor material locked (ME42)
Hello Gurus,
i am facing a problem with vendor material number (ME42->Purchasing->additional EANs) for a given material & vendor, i cannot add a vedor material (the field is locked). Can anyone tell me why ??
Thanks in advance,
StratosAnyone who knows ?
-
COGI error, material locked on user name.
Hello,
I have a problem regarding COGI error.
User was working on the COGI and system gets hanged. He restarted the system and again start working on COGI transaction.
But there was error for one line item is "The plant data of the material XXXX is locked by the user ABC".
I have deleted locked entries (with user name) by the transaction code SM12. But still COGI report shwos ths message.
Thanks to give me solution for this.Do not delete the COGI entry, this is the very last option you should use.
The error messages is COGI indicate the error that occurred when the automatic goods movement failed. The error message is historical, it does not change when you reopen COGI. Select the COGI line and then select "save", this will try to reprocess the goods movement, if the material is not locked anymore the goods movement will process, else another error will occur. -
Material lock if using by multiple users
While doing the various movements for the same material by various users, system is showing material is locked by user. Is it not possible to work on same material by different users with different movement types at a time.
HI WHAT U EXACTLY WANT
DO U WANT TO WORK ON SAME MATERIAL BY MULTIPLE USERS
IF YES THEN GOT TO SM12 AND ADD THE USER WHO IS LOCKING THEN ENTER AND DELETE ENTRIES REGARDING MARA TABLE OR ALL ENTRIS
(THIS METHOD IS NOT RECOMENDED BY SAP TO USE , ONLY FOR EMERGENCY U CAN USE IT)
REWARD IF USEFUL
REGARDS
KUNAL -
Material locked after using IDOC_INPUT_MATMAS
Hi All
I have a program which uses function IDOC_INPUT_MATMAS for creating/changing material. After that it also tries to update "Legal Control" using a BDC on MM02 but then I get message M3 022 (Group data for material xxx locked by xxx). It looks like the function is not unlocking tables MARA and MBEW (I can see this on SM12).
I have already searched over the internet, SDN and services.sap but no luck so far.
Anyone has an idea about what could be wrong?
Best Regards,
DouglasHi
I can see that are locks for 4 tables:
MARA
MBEW
MARC
MVKE
Messages can be M3 022 (for MBEW) and M3 897 (for MARC).
Best Regards,
Douglas -
Hi Experts,
When i try to execute the Delivery, i got an error
"Material AAAAAA is locked at the moment."
Please suggest.Hello,
some other user may be there in the change mode of the material master. If the problem is prolonging, then go to transaction SM12 and check whther there is any entry locked, Delete the locked entry if it is your training system.
Prase -
Hi all,
I am reading about materialized view from 9i documentation. In this it is mentioned that for updatable materialized views one needs to have updatable materialized view log, but it is not given the log has to be created by us like the materialized view log used for fast refresh or is it automatically created. Also in types of materialized view I can see primary key materialized view and row id materialized view and in materialized view log creation I can see that two type of log creation is possible, one is primary kep MV log and rowid MV log. If mmy understanding is correct then Primary key MV can have only primary key log created. Am I right? One more fact is that one cant import MV from one schema to other by mentioning fromuser to user parameter in 9i, but when I tried doing it in 11g it got imported fine. So is it a new feature too?
Thanks
Kris.When you create a materialized view you should be able to set the refresh interval. Using that, you can refresh the M view based on your needs. Below example has the sytanx:
CREATE MATERIALIZED VIEW mv_emp_pk
REFRESH FAST START WITH SYSDATE
NEXT SYSDATE + 1/48
WITH PRIMARY KEY
AS SELECT * FROM emp@remote_db; -
Non-Stock material - report -reg
Hi PM Experts,
I want to have a report for Non-Stock material of type - UNBW.But in RESB table ,all the matcodes are appearing,irespective of component line items deleted or not.But when we view in iw33,iw3l,the exact matcode is appearing.
How to identity the which component line items are deleted or not?
Thanks in advance.
prabuJoin table AUFK on order field (AUFNR).
And specify your order type (AUFK-AUART).
You can get the reservation item which is only assigned to order.
Regards
Luke -
Hi,
I am getting a message of MC601, when multiple users are working with the same material. How to make this warning message?
Please suggest...
Regards,
SridharHi
Indicates whether, during the availability check, the material is blocked for other users. The block remains until the transaction responsible has been saved. It is set at material-plant level.
If you select this field, the material is blocked during the availability check and other users cannot:
Make changes in the material master record
Create purchase orders for the material
Create orders for the material
If you do not select this field, the material is not blocked during the availability check. In this case, if many users are simultaneously checking availability, the results of the checks may not be reliable.
Thanks.
Vasu -
How to check for locks on a material - without using Enqueue function
Hi
We have a requirement in which - we need to check the lock ( exclusive ) on a material before we call the BAPI to update the material.
I don't want to actually lock the material before calling the BAPI - the BAPI itself acquires the lock as a part of its processing. All I want to do is to check whether lock on a material exists before calling the BAPI - thus avoiding any lock related issues on the material in the BAPI call.
How do we just merely check whether material is locked - any standard function module /SAP tables where in material lock is stored that we use/interrogate ?
Correct answers will be promptly rewarded.Hi ,
There is standard function enqueue_read ,based on material number .
Pass the material number to FM ENQUEUE_READ if sy-subrc = 0 then material is locked otherwise not .
Please reward if useful. -
HI, we need the field description for the following tables in SAP...
MAKT
MARA
MARD
MAST
MVER
MVKE
MARC
Edited by: Tutika Kumar on Nov 24, 2009 9:39 AMHI
Tables used to store the field values for Material Master
General Material Data MARA
Material Descriptions MAKT
Plant Data for Material MARC
Material Valuation MBEW
Storage Location Data for Material MARD
Units of Measure for Material MARM
Sales Data for Material MVKE
Forecast Parameters MPOP
Planning Data MPGD_MASS
Tax Classification for Material MLAN
Material Data for Each Warehouse Number MLGN
Material Data for Each Storage Type MLGT
Fields with field description
DF client level MARA-LVORM
Material Group MARA-MATKL
Old matl number MARA-BISMT
Base Unit MARA-MEINS
Order Unit MARA-BSTME
Document MARA-ZEINR
Document type MARA-ZEIAR
Doc. Version MARA-ZEIVR
Page format (MARA-ZE MARA-ZEIFO
Doc. change no. MARA-AESZN
Page number MARA-BLATT
No. of sheets MARA-BLANZ
Prod./insp.memo MARA-FERTH
Page format (MARA-FO MARA-FORMT
Size/dimensions MARA-GROES
Basic material MARA-WRKST
Ind. Std Desc. MARA-NORMT
Lab/Office MARA-LABOR
Purch.value key MARA-EKWSL
Gross Weight (MARA-B MARA-BRGEW
Net Weight MARA-NTGEW
Weight unit (MARA-GE MARA-GEWEI
Volume (MARA-VOLUM) MARA-VOLUM
Volume unit (MARA-VO MARA-VOLEH
Container MARA-BEHVO
Stor.conditions MARA-RAUBE
Temperature MARA-TEMPB
Trans. Group MARA-TRAGR
Haz. matl no. MARA-STOFF
Division MARA-SPART
Competitor MARA-KUNNR
GR slips quantity MARA-WESCH
Procure. rule MARA-BWVOR
Supply source (MARA- MARA-BWSCL
Season MARA-SAISO
Label type MARA-ETIAR
Label form MARA-ETIFO
EAN/UPC (MARA-EAN11) MARA-EAN11
EAN Category (MARA-N MARA-NUMTP
Length (MARA-LAENG) MARA-LAENG
Width (MARA-BREIT) MARA-BREIT
Height (MARA-HOEHE) MARA-HOEHE
Unit (MARA-MEABM) MARA-MEABM
Prod.hierarchy (MARA MARA-PRDHA
CAD Indicator MARA-CADKZ
QM procurement MARA-QMPUR
Allowed pkg wt MARA-ERGEW
Unit of weight MARA-ERGEI
Allowed volume MARA-ERVOL
Volume unit (MARA-ER MARA-ERVOE
Excess wt tolerance MARA-GEWTO
Excess volume tol. MARA-VOLTO
Var. Order Unit MARA-VABME
Configurable MARA-KZKFG
BatchManagement (MAR MARA-XCHPF
Packag.mat.type MARA-VHART
Maximum level MARA-FUELG
Stacking factor MARA-STFAK
Matl Grp Pckmat MARA-MAGRV
AuthorizGroup MARA-BEGRU
Ext. Matl Group MARA-EXTWG
X-plant status MARA-MSTAE
X-DChain status MARA-MSTAV
Valid from (MARA-MST MARA-MSTDE
Valid from (MARA-MST MARA-MSTDV
Catalog profile MARA-RBNRM
Rem. Shelf Life MARA-MHDRZ
Tot. shelf life MARA-MHDHB
Storage % MARA-MHDLP
Envt. relevant MARA-KZUMW
Prod.allocation MARA-KOSCH
Disc. in kind MARA-NRFHG
Mfr Part Number MARA-MFRPN
Manufacturer MARA-MFRNR
Int. material no. MARA-BMATN
Mfr Part Profile MARA-MPROF
DGIndProfile MARA-PROFL
Highly viscous MARA-IHIVI
In bulk/liquid MARA-ILOOS
Closed MARA-KZGVH
Batch rec. req. MARA-XGCHP
Assign.eff.vals MARA-KZEFF
Comp. Level MARA-COMPL
Period Ind. (MARA-IP MARA-IPRKZ
Rounding rule MARA-RDMHD
ProdComposition MARA-PRZUS
GenItemCatGroup MARA-MTPOS_MARA
Material locked MARA-MATFI
Ref. mat. for pckg MARA-RMATP
GDS-Relevant MARA-GDS_RELEVANT
Origin Accept. MARA-WEORA
Description (MAKT-MA MAKT-MAKTX
DF plant level MARC-LVORM
P-S matl status MARC-MMSTA
Valid from (MARC-MMS MARC-MMSTD
ABC Indicator MARC-MAABC
Critical Part MARC-KZKRI
Purch. Group MARC-EKGRP
Unit of issue MARC-AUSME
MRP profile MARC-DISPR
MRP Type MARC-DISMM
MRP Controller MARC-DISPO
Pl. Deliv. Time MARC-PLIFZ
GR Proc. Time MARC-WEBAZ
Period Ind. (MARC-PE MARC-PERKZ
Assembly scrap MARC-AUSSS
Lot size MARC-DISLS
Procurement MARC-BESKZ
SpecProcurement MARC-SOBSL
Reorder Point MARC-MINBE
Safety Stock MARC-EISBE
Min. Lot Size MARC-BSTMI
Max. Lot Size MARC-BSTMA
Fixed lot size MARC-BSTFE
Rounding value MARC-BSTRF
Max.stock level MARC-MABST
Indiv./coll. MARC-SBDKZ
Storage costs MARC-LAGPR
SelectionMethod MARC-ALTSL
Discontin. ind. MARC-KZAUS
Eff.-out date MARC-AUSDT
Follow-Up Matl MARC-NFMAT
Reqmts grouping MARC-KZBED
Mixed MRP MARC-MISKZ
SchedMargin key MARC-FHORI
Backflush MARC-RGEKZ
ProdScheduler MARC-FEVOR
Processing time (MAR MARC-BEARZ
Setup time (MARC-RUE MARC-RUEZT
Interoperation MARC-TRANZ
Base quantity (MARC- MARC-BASMG
InhseProdTime MARC-DZEIT
Max. stor. per. MARC-MAXLZ
Time unit MARC-LZEIH
Withd.fm.pr.bin MARC-KZPRO
Overdely tol. MARC-UEETO
Unlimited MARC-UEETK
Underdely tol. MARC-UNETO
Total RL time MARC-WZEIT
Replacemt part MARC-ATPKZ
Post to insp. stk MARC-INSMK
QM Control Key MARC-SSQSS
Doc. required MARC-KZDKZ
Insp. interval MARC-PRFRQ
Loading Group MARC-LADGR
BatchManagement (MAR MARC-XCHPF
Quota arr.usage MARC-USEQU
Service level (MARC- MARC-LGRAD
Splitting ind. MARC-AUFTL
Avail. check MARC-MTVFP
Fi.Year Variant (MAR MARC-PERIV
Corr. factors MARC-KZKFK
Setup time (MARC-VRV MARC-VRVEZ
Base quantity (MARC- MARC-VBAMG
Processing time (MAR MARC-VBEAZ
Supply source (MARC- MARC-BWSCL
Autom. PO MARC-KAUTB
Source list MARC-KORDB
Comm./imp. code MARC-STAWN
Ctry of origin (MARC MARC-HERKL
Reg. of origin MARC-HERKR
Comm. code unit MARC-EXPME
Exp/imp group MARC-MTVER
Profit Center (MARC- MARC-PRCTR
Plng calendar MARC-MRPPP
Repetitive mfg MARC-SAUFT
Plng time fence MARC-FXHOR
Consmption mode MARC-VRMOD
Bwd cons. per. MARC-VINT1
Fwd cons.period MARC-VINT2
Alternative MARC-STLAL
Usage MARC-STLAN
Group MARC-PLNNR
Group Counter MARC-APLAL
Cstg Lot Size MARC-LOSGR
SpecProcType MARC-SOBSK
Production unit MARC-FRTME
Prod.stor.loc. MARC-LGPRO
MRP group MARC-DISGR
Component Scrap MARC-KAUSF
CertificateType MARC-QZGTP
Takt time MARC-TAKZT
Coverage prof. MARC-RWPRO
Field name MARC-COPAM
CC phys. inv. (MARC- MARC-ABCIN
Variance key MARC-AWSLS
SerialNoProfile MARC-SERNP
Confble matl MARC-STDPD
REM profile MARC-SFEPR
Neg. stocks MARC-XMCNG
Target QM sys. MARC-QSSYS
Planning cycle MARC-LFRHY
Rnding Profile (MARC MARC-RDPRF
Ref.matl: cons. MARC-VRBMT
Ref.plant:cons. MARC-VRBWK
Date to MARC-VRBDT
Multiplier MARC-VRBFK
Autom.reset MARC-AUTRU
Preference MARC-PREFE
Exemption cert. MARC-PRENC
Continued....
Maybe you are looking for
-
I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not con
-
My computer is unable to load pdf documents onto a webpage. The error message reads 'there was an error uploading your document'. This appears in both firefox and safari. It seems to only occur on my machine; uploading the same files was successful o
-
Estimados una consulta : es posible volver a Snow leopard desde OSX Maverick con los discos de instalación de Snow leopard?? Muchas gracias
-
this error named bad image turns up every time due to corrupt dll file
-
F4 Valuehelp with own dataelement in ALV
Hi out there, i createt own dataelement with own domain. in domain there are fixed values. Now i designed an itab for alv grid. (abap oo methods). Unfortunately the F4 Help does not appear. How to config the corresponding fieldcat? CLEAR ls_fieldca