Material master problem

Hi,
The issue relates to the material master data in the organizational level screen where we have to enter the Plant and the Storage Location.Suppose we have 2 plants Bhatinda and Mundra and one each storage location Bhatinda Storage and Mundra Storage location respectively.
While entering the plant if we select Bhatinda and in the storage location field we enter Mundra Storage location the system doesnt give any error but moves forward by updating the Plant also. In this case the plant gets updated to Mundra Plant.
There is a requirement for an error/warning message when the wrong storage location is selected rather than system updating the plant field itself.

Hi,
System doesnt update Plant, rather it extends the material to new plant also. Now you can use the same material in both plants and set diff parameters in diff plants if reqd.
Regards

Similar Messages

Change UOM in Material Master Problem

Hi all expert,
Im trying to change a raw material UOM from KG to Liter in material master, i have deleted all the document related to the raw material, but when i change the UOM, it display message as below:
Material Master Maintenance
The base unit of measure cannot be changed.
The reasons for this are:
Independent requirements are already assigned to the material.
Plant MRP area
   JK01
I can't find the independent requirements so can't delete it.
Hope someone can give me advise.
Very thanks for help.

You can also see the planned ind. req. for your material from Txn. MD63
If you delete the ind. reqs. no longer appear when you access via trans.
MD62/MD63. However, the records are still in table PBIM with a
deletion flag set on field LOEVR, so, you have to do the planned
independent requirements reorganization as described in note 135807.
I hope this can help you !!!

Material master - problem with event viewcreated

I have created a WF with a start event ZBUS1001-ViewCreated. ZBUS1001 is a copy of object BUS1001006.
If I trigger the event manually, or test the wf, than it works fine.
I've linked this event properly (or just I hope), but when I start MM01 to create a new view for a material in the event trace I see the BUS1001006-VIEWCREATED and of course my WF doesn't start.
So what mistake did I do?

Dear Sue,
I have checked the points what you mentioned, with the following reason:
Q: Have you delegated your business object to the parent object, BUS1001006 ?
A: Supertype            BUS1001006   Standard materi
Q: Have you specified the workflow in the event linkage table (SWETYPV)?
A:
Object Category BO BOR Object Type
Object Type: ZBUS1001
Event: VIEWCREATED
Receiver type: WS90000001
Receiver Call: Function Module
Receiver Function Module: SWW_WI_CREATE_VIA_EVENT_IBF
Behavior Upon Error Feedback: 0 System presetting
Receiver Status: 0 No errors
Q: If you have, and you trigger the event, is the workflow initiated at all, or does it show up with a stop light in the event log (SWEL).
A: If I trigger the event with SWUE than it works fine, the wokrflow started. But, when I use MM01, than not my event triggered, but this:
BUS1001006 VIEWCREATED     No receiver entered
So probably I've made a mistake in event linkage, but I don't know what.
This is my very first wf, so every help is very useful for me.
Thans for your help,         Csaba

Problem with *serial no. profile* in work sheduling view of material master

Hi ! !
I am here with a problem with serial no. profile in work sheduling view of material master.
By mistake for some FHMI type ( PRODUCTION RESOURCE TOOLS )materials, serial no profile exist in 'work sheduling' view. Due to that we are facing problem in GRN.
when I am trying to remove that with MM02. i m getting a message as Serial numbers already assigned to this material
Please suggest how to remove serial no. profile.
Thanks in advance,
Prab

Hi,
go to MMBE and check the Current Serial number...for FHMI type
and go to IQ02 and close the Serial number range at the Current number range...
Now you can assign this serial number range to another material type...
Thx
Raju

Unsolved Problem-Order without Material Master

Hi all
My problem is still unsolved. I want to create Sales Order with out Material Master. In Materials Management, we create Purchase orders to vendors with out a Material Master by just typing description of a material and then assigning Material Group and Cost Centre to that description.
If it is possible to issue Purchase Orders with out material master, then it is not possible to create sales Order also without material master?
I got an answer here yesterday to type description in Material description field in SO and use item category TATX. The problem with this is, it allows delivery, but does not allow pricing (pricing setting immediately goes to display mode in item category screen). If I do any other alterations with this item category, then it asks for material number while creating sales order.
Please help

Hi,
I think the for text material pricing is not applicable.Thats why it's not taking.Text material is only for displaying text only.
Regards,
Hari.

Problem with BAPI of Material Master creation

Hi,
I am creating material master(mm01) through BAPI_MATERIAL_SAVEDATA.
Program is working fine but when i m checking in MM03 to display uploaded data through BAPI, i cant able to see material which i created to through BAPI but i can see in MARA table.
i dont know wht is the problem ?
can anybody let me know abt this ?

then u are not committing the work.
flow will be like this
call ' BAPI'
if return[] is initial.
commit work.
else.
endif.
Regards
peram

Problem in configuration of material master

Dear cons
I want to make quality management control key field is a required field in material master. so in T-code-
OMSR I selected field selection group-99.& make it as a required field.At the time of creating material master the system activated other field like certificate type & target QM system as required field along with QM CONTROL KEY.How can we make it only QM CONTROL KEY as a required not other.
nrk

THe field name for certificate type is QZGTP... Selct the right arrow in the transaction OMSR and make it as optional in MM01..
Hope this helps..
In a similar way try to do for Target system...QSSYS... make it as optional or hidden for MM01..
Hope it will silve ur problem...
karthick

I have encountered a peculiar problem in MM01 material master upload.

I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.

Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva

Problem in extending material master data using BAPI?

Hi all,
I have created a program to upload material master using BAPI_MATERIAL_SAVEDATA WITH VIEWS
Basic view, purchase view, account view , storage view and MRP view. I am successful while uploading this data while not taking the valuation type field to account view(passing only valuation area,valuation class and moving price).
But when i am trying to pass valuation type field also then it is giving error as 'First create the valuation-type-independent data' .
So i have written another program to extend this material to enter valuation type , then it is giving the error as 'Valuation category does not allow split valuation'.
Please help me to solve this problem and while modifying what are the mandatory values to pass to BAPI?
Thanks,
Vamshi.

Hi VAMSHI,
I have your same error but I don't know how to solve it. We have active "material split valuation" and valuation type is mandatory field if using ACCOUNTING and COSTING views.
Please, let me know.
Thanks in advance.
GB

Problem in BDC for Material master Change

Hi,
I have made a BDC to change the material master, I have done the recording with SHDB   I want to do changes in Sales data and MRP data, when I do the recording I have selected views and it was 4 , 11 AND 12 VIEW IN select vie option    but in some material Classifcation view is maitain and it is coming at 2nd position and my selected views are shiftin by one position due to this BDC is giving error Screen contain no filed -
I sthere any way that I acn directly select the Three views as Sales data , MRP1 and MRP2,   because when we do the recording it is not showing the name it is showing as
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=DEF_SAVE'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(04)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(11)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(12)'
                              'X'.
regards,
zafar

Hi,
Myproblem is solve , in the table MARA i found the filed VPSTA : Maitenance status,   Having the vakue may KVEDLBZX those value is diffrent for different material   this value indicates
User department                       Maintenance status
Work scheduling                                      A
Accounting                                               B
Classification                                            C
MRP                                                           D
Purchasing                                                E
Production resources/tools                       F
Costing                                                      G
Basic data                                                  K
Storage                                                       L
Forecasting                                                 P
Quality management                                    Q
Warehouse management                             S
Sales                                                           V
Plant stocks                                                 X
Storage location stocks                               Z,
after reading what fields are maitain according to that i have selected the proper views and my problem is solve.
regards,
   zafar

Material master creation problem in sales org views

Hi
I have faced problem while creating material master
In mm01 >then select the org views basic data1&2 , sales org data1&2, purchaing, accounting and costing views >thanclick org levels> here enter the plant , stor loc, sales org & dist.chanel >then enter fill the all fields and save this is original procedure
but problem occured at ... in org levels without dist.chan ( only enter plant ,sales org stor loc ) also system goes to sales org data-2
in our development system .. in select sales org 1& 2 ... system should ask sales ogr &dist,chanel at org ..level scren ..if we does't ente dist.ch .. system does't allow the material master...actually like this in production system also worked earler....but now our production system not worked like this procedure ...
pls ..guide me to solve this issue any one
regards
sesidhar

hi
we have 1 sales org ,4 dist.chanel and 1 plant
4 distbution channels are also assigned to sales org and plant
but problem is ..when create material amster ...if select the select views sales orgdata 1,2 and sales gnerael plant data
than press enter ... here system ask the palnt (mandatory), sales org(mandatory) and dist channel9optional).in production sysstem....
plant          1000
sale org     zosd
DC             .........(BLANK)
IF press enter system allow to ... sales org data 2
if DC ....(BLANK) System does 't allow to next screen sales org data 2
how can i change this optional to mandatory in DC

Problems in Material Master Upload by LSMW

Dear Experts,
The question was asked to me in interview, What Problems you face while uploading your material master data by LSMW ?
Please give me some information on this question.
Thanks in Advance

hi,
Check the link it would be usefull:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c5/213c487a3c11d3bc8100105a6588b2/frameset.htm
Hope it helps...
Regards
Priyanka.P

Problem loading material master (IS Mill) data from ECC to BI

Hi Gurus,
We have a problem loading Material master data from ECC to BI 7.0 SP 18.
The scenario is :
The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
That is data element MATNR has 18 chars and its output length is 40 chars.
When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
OMSL setting shows length as 40.
When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
Till here no problem.
On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
OMSL setting cannot be set more than 18.
Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
Diagnosis
Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
System Response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
I did search for SAP note related to this... but could not find any.
There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
Requesting you all experts for help.
Best Regards,
Deepak

Hi,
follow bellow steps:
1. you need to activate the Datasouce in BI side.
Goto RSA1> Datasource> Select Datasource> Double click> Check fileds and Activate.
2. Replicate the Datasource into BI side.
3. Check the RFC connections by useing SM59.
Regards.

Problem with mass IDoc for Material Master

Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
Pooja

Hello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.

Problem in updating material master using FM 'MD_MRP_LEVEL_CHANGE_DATA'

hi experts,
i m using this FM 'MD_MRP_LEVEL_CHANGE_DATA' to update the material master for MRP Area related data. i m passing the fields in the FM according to the requirement. when i execute the program it gives a msg
000I : 000, i m not able to track this msg that what can be the error..........
and also the changes are not reflected in MM03 transaction.
and if i m trying to pass the same data directly from SE37 and executing the FM , its running perfectly and changes are reflected in MM03.
please help me out to get out of this problem.
points will be rewarded for the correct answer.
thanks in advance..........
Manisha

Manisha,
Can you please provide the code where u r having problems?
Thanks
Ganesh.S

Material master problem

Similar Messages

Maybe you are looking for