I have encountered a peculiar problem in MM01 material master upload.

I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.

Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva

Similar Messages

Problem while creating Material Master (MM01)

Gurus,
I am novice to sap sd, and I am trying to create a Material (MM01) for a Customer, and have given the inputs 'Material', 'Industry sector' etc.
To my surprise, I am unable to see ' 'Sales org 1' , 'Sales org 2' ' Sales : General plant' tabs .
Should I need to enable something to view these tabs ?
All I could view is 'Organizational levels' ' check screen data' ' Additional data'
Kindly bare for this silly question!
Thanks,
Karthik

Hi,
Try to create a Material in this way. Check whether you are using same steps.
Go to MM01
Enter Industry sector & Material type (Eg: FERT - Finished Products)
Click on "Select view(s)" button option without pressing Enter key directly.
Then you should be able to see all tabs listed in "Select view(s)" pop up window.
Check whether "View selection only on request" tick box is marked. If it's marked, Un-tick it. If you have marked that, then this screen will not automatically appear.
Highlight relevant tabs.
Press "Organizational-levels" button in that pop up.
Enter relevant Sales Org/ DC & Division.
If "IOrg. Ievels/profiles only on request" is marked, then Un-tick that also. Its for same purpose as above.
Press Enter.
Now check whether you get those tabs in the Material Master.
Best regards,
Anupa

Problem when creating material master data

Hi,
I use MM01 to create a material master data and save it, the system appears the material created successfully. But when I use MM03 to display the material, the system appears no this material exists in the system. I use ST22 find some runtime error: "Insert into MARA values MARA" .
How can I solve this problem?
Fiona Zhang

Hi,
Have you executed the MARA table by material name.
Then try with MARA-ERNAM field. Enter ur user id and then execute. lets see whether it is really created or not in ur system.
If u dont find any material created by ur name then go to SO01 transaction and check ur inbox....U will find some mails like update terminated.
U can talk to ABAPer to get this resolved.
Thanks & Regards,
Shaik Hussain

Problem in extending material master data using BAPI?

Hi all,
I have created a program to upload material master using BAPI_MATERIAL_SAVEDATA WITH VIEWS
Basic view, purchase view, account view , storage view and MRP view. I am successful while uploading this data while not taking the valuation type field to account view(passing only valuation area,valuation class and moving price).
But when i am trying to pass valuation type field also then it is giving error as 'First create the valuation-type-independent data' .
So i have written another program to extend this material to enter valuation type , then it is giving the error as 'Valuation category does not allow split valuation'.
Please help me to solve this problem and while modifying what are the mandatory values to pass to BAPI?
Thanks,
Vamshi.

Hi VAMSHI,
I have your same error but I don't know how to solve it. We have active "material split valuation" and valuation type is mandatory field if using ACCOUNTING and COSTING views.
Please, let me know.
Thanks in advance.
GB

Unsolved Problem-Order without Material Master

Hi all
My problem is still unsolved. I want to create Sales Order with out Material Master. In Materials Management, we create Purchase orders to vendors with out a Material Master by just typing description of a material and then assigning Material Group and Cost Centre to that description.
If it is possible to issue Purchase Orders with out material master, then it is not possible to create sales Order also without material master?
I got an answer here yesterday to type description in Material description field in SO and use item category TATX. The problem with this is, it allows delivery, but does not allow pricing (pricing setting immediately goes to display mode in item category screen). If I do any other alterations with this item category, then it asks for material number while creating sales order.
Please help

Hi,
I think the for text material pricing is not applicable.Thats why it's not taking.Text material is only for displaying text only.
Regards,
Hari.

Problems in Material Master Upload by LSMW

Dear Experts,
The question was asked to me in interview, What Problems you face while uploading your material master data by LSMW ?
Please give me some information on this question.
Thanks in Advance

hi,
Check the link it would be usefull:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c5/213c487a3c11d3bc8100105a6588b2/frameset.htm
Hope it helps...
Regards
Priyanka.P

Problem in updating material master using FM 'MD_MRP_LEVEL_CHANGE_DATA'

hi experts,
i m using this FM 'MD_MRP_LEVEL_CHANGE_DATA' to update the material master for MRP Area related data. i m passing the fields in the FM according to the requirement. when i execute the program it gives a msg
000I : 000, i m not able to track this msg that what can be the error..........
and also the changes are not reflected in MM03 transaction.
and if i m trying to pass the same data directly from SE37 and executing the FM , its running perfectly and changes are reflected in MM03.
please help me out to get out of this problem.
points will be rewarded for the correct answer.
thanks in advance..........
Manisha

Manisha,
Can you please provide the code where u r having problems?
Thanks
Ganesh.S

Problem related to Material Master?

Hi All,
I want that when ever any person creates a new material and on going on Views it shows the particular views which were fixed by us. Please Tell me how can I achive this.

Hi,
You can achieve this by way of authorization control. In T.code: PFCG, select your role for creating / changing the material master, Select option Maintenance statuses. Then at change status option select views that you want to give the authorization to the users. Create profile & save the role. Now assign the role to the users. They will get only those views you have selected for them. You have to select those views in all the roles related to material master (create, change, display).
Regards,
Biju K

Problem:related to material master replication from r3 to srm

hai everybody,
hai to all of u my friends....recently i have learned sap srm 5.0..and now i am practicing in my institute from starting configuration with a fresh client.everything has done successfully except replication of material master.while doing material master replications the system throws an error like" product hierarchy has not maintained" and one more error while executing smq2.. like "exception condition :guid forlogsys_changed"raised....thanks in advance

It seems that the logical system name has been renamed or changed. You need to update the config tables. Fix it using Trx BDLS.
Regards, IA

Problem in material master upload using LSMW

Dear All
I am trying to upload material master using LSMW (batch input recording).
I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
why system is asking me to select the views and also how to select the required view?
thanks
manoj gupta

thanks charu
do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
thanks
manoj gupta

I have encountered a cropping problem in cs4

After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before. I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.

scarpakb wrote:
…working on is 1920 x 2560 pixels with resolution 350 dpi, so it is not a resolution issue…
What I was wondering about was not the resolution of your document, but the value you may have entered in the Crop Tool's Resolution box in the Options Bar of the Crop Tool.
For instance, it's common for users to inadvertently end up with a resolution of 0, 1, or 10000 pixels per inch in that box, which would trigger exactly the consequences you are describing here.
So, let me repeat:
…but I'll make a wild guess:
You have some ungodly value in the resolution box in the Option bar of the Crop Tool. Hit the "Clear" button in that same Options bar and try your crop again.

I have encountered the following problems with Adobe Acrobat XI Pro version 11.0.9 with OS X "Yosemite" version 10.0.

1. PDF files from the Internet can be opened but graphics do not appear. In place of the graphic the area is colored gray.
2. I use an HP scanner to create PDF documents. I am unable to use Adobe Acrobat XI to scan from my HP Officejet Pro 8600 Plus. Apple reports an error. However, I can scan documents to PDF using an HP utility, however, these documents cannot be displayed by Adobe Acrobat XI Pro, and therefore, cannot be edited or used to create forms. The documents can be displayed by Adobe Acrobat Reader.
These problems also existed under the previous OS X system “Maverick”. Please tell me that only a change in setting is required to be able to read and edit these documents created via scan or describe a usable work-around solution.

Point 1: try turning on "Show large images" in your preferences. In Acrobat for Windows, it's under the Page Display preferences. I'm not sure about OS X.

Material Master upload problem (LSMW)

Hi
I am using Standard Batch input program (RMDATIND) for MM upload i need to validate the old material number if it is already existed in MARA it should throw an error at the end of the processing saying that "Old material number" already existing in MARA . Flat file will have thousands of records.
One solution like, we can move all the error records in one internal table in code of Filed mapping conversion rule step , but the problem is where we can write the error records?
Another question when we use Standard program for conversion is it possible to show error log at the end of the processing?
Its very urgent Kindly help me ........
Rgds,
bhanu.......

Hi,
YOu can populate error messages in LSMW. To achieve this you add code in LSMW. Follow the below procedure to add code in LSMW.
In Display FieldMapping and Conversion rule Step of LSMW click the button Display Variant. A screen will pop up. Check the boxes - Global Definitions and ABAP Sub Programs. This will allow you to add code in LSMW.
At check the error records follow the below mentioned procedure...
<b>Error messages in the conversion log</b>
How can user-defined error messages be added to the conversion log?
1.     Use of WRITE command in the Coding
a.     Example: WRITE: Error during conversion of field xxx
2.     In the editor use Insert -> Message to use a message already existing in the SAP system.
a.     Example (Coding after using the menu function and filling the fields):
WA_ERRORTAB-ID = '/SAPDMC/LSMW'.
WA_ERRORTAB-MSGNO = 012.
WA_ERRORTAB-PAR1 = 'A'.
WA_ERRORTAB-PAR2 = 'B'.
WA_ERRORTAB-PAR3 = 'C'.
WA_ERRORTAB-PAR4 = 'D'.
INSERT WA_ERRORTAB INTO TABLE G_ERROR_TAB.
The message will be added to the log.
For further reference click the link below
http://www.erpgenie.com/sapgenie/docs/Lsmw.zip.
Regards,
Vara

Material Master upload - LSMW direct input method - Internal Number problem

Dear friends,
I am uploading material masters with LSMW - Direct Input Method.
The materials have internal numbers.
I have four plants and I want to extend the same material in all plants.
But LSMW is creating a new material for each row.
Is there any way out or any indication I put in file to repeat the internal numbers created for all other plants?
I can create another LSMW for material extension. But I want to know whether the problem can be solved in the current LSMW?
Regards,
Avinash

http://www.sap123.com/a/98/
Check the internal number range once.... before extending mateial...

Problem in LSMW - Vendor master upload

Hello Experts,
I am doing vendor upload using LSMW direct input (RFBIKR00) program. I am uploading files in LFA1, LFB1, LFBK, LFM1 and MAIN - total 5 files, MAIN file has all the key fields which is in(BLF00) structure. Other files has same table structure as its names are.
Now When I run the batch input session. It works for the first vendor, but if there is record for the same vendor with other company code, then it gives error as no data available for screen 102.
for eg. MAIN file has records as below
KTOKK,EKORG,BUKRS,LIFNR,TCODE
LIEF, 0990, US01, 0001234567, XK01
LIEF, , CH01, 0001234567, XK01
In above records, same vendor has 2 company codes, so for the 2nd record, I think Accounting Information screen should come directly, but when I saw session run in foreground, it takes all the fiels blank , and then gives error as no data available for the screen, and it does not create record for CH01.
Please suggest If I have to do something else for it, or am I doing anything wrong!?!
Regards,
bh_hir

HI,
In step 12, I see both the records, but in the 2nd record - I also see LFA1 and LFM1 structure filled with LFB1.
so I think for 2nd record It should just fill LFB1 and header(BLF00) right?
But dont know how to achieve this...
please suggest.
Thanks,
bh_hir

I have encountered a peculiar problem in MM01 material master upload.

Similar Messages

Maybe you are looking for