Material type wise batch numbers

Hi,
I want to have different batch numbers ranges for different material type
Eg batch nos for Raw material should start with 10000000000
Batch nos for semi finish - 2000000000
batch nos of finish - 3000000000
Can anyone help me in this regards
Thanks in Advance
Abhi

You can use some of the standard User Exits or develop a custom user exit for this purpose.
You can use SAP enhancement SAPLV01Z for internal batch number
assignment. This enhancement contains two function module exits that you
can use to define number ranges or templates for batch numbers:
EXIT_SAPLV01Z_001. You use this exit to replace the number range
object and/or interval proposed by the system with your own number
range object and/or interval.
In addition, you can, for instance, stop the system from assigning
an internal number depending on the material or plant. You can also
use this exit to stop the dialog box from appearing.
EXIT_SAPLV01Z_002. Using this exit, you can either change the number
assigned by the system, or assign your own number.
There are many such user exits, please check and use the appropriate user exit.
Hope this helps you.

Similar Messages

  • Purchase report on Material Type wise

    Dear All,
    Is there any tcode avl to take the report of Purchase orders material type wise.
    Regards

    Hi,
    You can get the report as you required by standard tcode ME2n, ME2M run any of tcode then press Shift+F4 than choose purchase document item > there you will see material type > click on that it will move to ME2N screen . Now enter select material type and provide further data as per your requirement and execute.

  • Shall i restrict CS01, CS02 by Material type wise

    Dear all Gurus,
    Please help me out to restrict the CS01 & CS02 by material type wise.
    Thanks in Advance
    pabale

    Dear Mr. Devendra,
    Please let me know the configuration in details becoz i want to restrict the user for not to change the HALB TYPE BOM in CS02 but in case of FERT type he can change.
    e.g.
    BOM Creation user has to rights to create / change the BOM of material type FERT.
    BOM Creation user has to rights to create / but no change authority the BOM of material type HALB.Change rights we have to assign to authority.
    Hope from you positive feed back and thanks for immediate respond to both.
    Regards,
    Pabale

  • Mandatory in material master with material type wise

    Dear all
    Is it possible to make a field mandatory in material master with material type wise?
    kindly help

    Hi
    See the below config
    Check in OMS2 for your material type for "field reference". then
    Spro>logistics general>Material master-->field selection.
    Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
    If required take help from MM consultant
    Regards
    Antony

  • Material type wise Po ,gr value

    Hi
    Are there any standard reports available for Material type wise PO value ,gr value and invoice amount???

    Hi ,
    Then try to get data like this
    tables ->MARA->EKPO+EKKO-->EKBE.
    regards
    Prabhu

  • Material type wise closing balance

    hi experts,
                  can u help me out to get the material type wise closing balance of all plants, we can get this using mbew but it will be a performnace problem ,hence can u help me out to find a function module or bapi which does this, or tell me a way to acieve this

    Filter the material from mara  table (mara-MTART).
    and obtain the data from mard table for those material in mara table and plant
    you can also use the standard txn: MB52
    Thanks
    Ganesh

  • Ffield mandatory material type wise

    Dear all
    Is it possible to make a field mandatory  material tyes wise in material master?
    kindly help

    Dear,
    Yes you can do it through OMSR OMS9 select your field you want to make mandatory then in Field reference for material master here according to your material type you can do it.
    Regards,
    R.Brahmankar

  • Material type Wise Opening /Closing

    How Can I get a report of Material Type Opening/Closing Balance?

    Hi Biswajit
    R u not getting the desired result using MC.9.
    and as for MB5B only option i can see is first we get a list of material for a material type from MARA, then select those material and enter into MB5B report.
    regards
    Yogesh

  • Putaway in Warehouse to Bin with same material but different batch

    Hi Everyone,
    I'd appreciate some help on this as I'm a bit perplexed.
    When a Goods Receipt (MIGO) is being done we have a problem with the Stock not going to the correct Storage Bin. Basically we require to find a storage bin with the same material and add the receipted material to the storage bin.
    However the system will not let us do this becuae the batch for the material is different and the system doesnt put the material away into the desired storage bin. Instead the system puts the material in Storage Type 902 with the PO number as the Storage Bin.
    The functional consultant has asked me to implement a user exit to search for a storage bin with the same material as is being Goods Receipted and put the material in this bin. I have a problem with this becuase there is no TO being created once the MIGO is done so I dont know where to start on this problem.
    To illustrate 
    1. Migo is done on Material 1234
    2. A user exit should search for a bin already containing Material 1234 (ignoring batch) and add this receipted material to the bin.
    Is this possible ??
    Any help or suggestions is greatly appreciated. Thank you very your time.
    Kind Regards
    DK

    HI,
    I hope system will allow to store same material with different batch numbers in the same Bin.
    System will treat it as separate quants in the Bin since Batch no: is different.
    In this case you can try with Putaway strategy - I - addition to existing stock itself.
    If you face any issue regarding Auto-TO creation, check the below link.
    [http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm]
    Also try to do a manual TO creation with reference to the TR in the above case in Simulation system so that you will be able to know the exact reason for the error.
    Thanks & Regards,

  • PR Release with Material Type Characteristics

    Dear Experts,
    Any of you used material type as PR release class craracteristics?
    I have one query regarding this-
    1. My business requires material type wise relesae strategy, means raw material and spares will have separate release strategy
    2. We have included material type in Class cracteristics.
    My query is if user creates a PR with out material code, that PR will not have any material type. But I want this to follow the release strategy. How to achieve this goal?
    Anybody worked with this scenario?
    Full points will be awarded for suitable solutions.
    Regards,
    Santoah

    Hi,
    Instead of material type, you can use material groups for release strategy. Even, if a user creates a requisition without material code, he will still have to enter a material group. This will serve ur purpose.
    However, if there are many material groups and you prefer going with material type, then you will have to enhance the communication structure CEBAN, with Material type field, to be able to create a release characteristic for material type.
    Hope this helps. Reward, if useful.
    regards,
    VS

  • Authorisation restriction to change batch ( MSC2N ) by material type

    Hi ,
    We have a requirement wherein we want to restrict users from changing batch records ( MSC2N ) by material type. Viz. A user xyz should not have authorization to change batch for material type FERT.
    We cannot use the authorization group ( BEGRU ) field of material master alongwith object M_MATE_CHG as this field is already being used for another purpose to restrict users by country for MM01,MM02 & MM03.
    Please do let know if you know of any alternative method of doing so.

    Hi,
    The new authorization object will work only if the corresponding changes are made in the related program.
    Open the program code for the MSC2N transaction (via Se93), and search for the string "AUTHORITY-CHECK". You will find a piece of code that checks for the authorization object M_MATE_CHG and its related field values. This will need to be changed to Z_MATE_CHG and its corresponding values.
    You will need an ABAP-er for this.
    Only then will the authorization check work correctly. Once this is done add the object in the corresponding role (and also change SU24 entry for MSC2N accordingly if required).
    Regards,
    Sanju.

  • Can we capture two types of Serial Numbers for a material?

    Hi,
    I have scenario where i need to capture two different types of serial numbers for a material. This scenario is very similar to the below one -
    Say if a CAR is a serialized material, then i want to capture engine no. and chasis no. for each car.
    I know in standard serial number management, we can capture one kind of serial no. for an item, but can we capture two types of serial number for an item? If yes, how we can do that?
    Please help.
    Thanks,
    Parimal.

    Hi,
    No it is not possible to have two serial numbers for a material.
    The main attribute of a serial number is that it is UNIQUE.
    You can better have the vehicle number as the required serial number and the other numbers under the Manufacturer data of the General data tab of the IQ01 transaction. ( Equipment master creation ).
    You can better change the name of the manufacturer data such as Model number to Engine numeber and Manu serial no to Chasis no etc.., using CMOD transactions.
    Regards

  • Batch no assignment as per material type

    Hello All
         I have requirement wherein the batch no is dertermined based upon the material type, I have used userexit EXIT_SAPLV01Z_001 for the same, initially it was finalised that batch no would be inernal, so I went for internal batch no assignment wherein I was using no. range object BATCH_MAT & I have defined sub-object for each material type & assigned no. range interval for each sub-object. It was working fine.
              Now  there is a requirement that for material type ROH(raw material) batch no has to be externally assigned. Kindly suggest how this requirement can be catered. Looking forward to your valuable inputs.
    Regards,
    J K Tharwani

    Thanks Aneesh for your valuable inputs,
            I am able to resolve my problem, what I have done let me explain you here, I have used same user exit which I have mentioned in this thread & I have defined a subobject ZROH under No Range object BATCH_MAT with no range interval as: AZZZZZZZZZ-ZZZZZZZZZZ(External).
    Now for movement type 101 I have I have done little change in the customization of Batch Management. I have set indicator as "B"(Automatic/manual & check in user exit) in following node:
    SPRO>Log Gen>Batch Mgmt>Creation of new batches>Define Batch creation for goods movements.
          The above settings have resolved my problem.
    Regards,
    J K Tharwani

  • How display possible batch numbers according material number in cv04n

    Hi All,
    cv04n -->clasifications,  there is fields availables like batch number, material number.
    initially in batch number field not available f4 help, material number f4 help is available.
    my requirement is create f4 help for display possible batch numbers, for this i create zfunction module and done f4 help for batch numbers.
    but first enter material number then display batch numbers whenever click f4  according material number.
    in my zfunction module how i know user which material number entered.
    how display, please give me solution with coding.

    Check following customizing:
    Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
    If you want to change the batch level, you have to start conversion to activate the change.
    Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
    "Specify Batch Level and Activate Status Management".
    If you want to work with same batches for different materials, you should use "Batch unique at material level".
    Logistics General --> Batch Management --> Batch Number Assignment
    Here you can define how the system should create batch numbers.
    Best Regards, Dirk

  • Consumption report - material type/CC wise.

    Hi,
    Is there any standard report to view the consumption quantities with values?
    Inputs are material type, cost centre and a particular period.
    Regards,
    Siva

    Thanks...
    This will be of helpful.
    But, can you guide further?
    The field is MTART & the table is MARA.
    When I enter these in the config, system is not accepting.
    May I have to take the help of an ABAPPER and incorporate anything in program?
    Regards,
    Siva

Maybe you are looking for

  • How to put a string from one Frame to another Frame?

    Dear all, How can I put a String from one Frame to another Frame? When the application started, the Frame 'WindowX' will be displayed. After you press the 'openButton', a whole new Frame (inputFrame) will be shown. In this Frame )(inputFrame) you can

  • Regarding the AGE ANalysis

    Hi Can anybody provide me Standard report which can tell me the how much Qty of stock is lying in particular storage location of plant for since how many days? If i want to develop customized report what logic i should follow ? Regards

  • Dequeueing a SYS.AQ$_JMS_TEXT_MESSAGE

    I am new to AQ please give me advice I created queue with AQ$_JMS_TEXT_MESSAGE and I able to enqueue the message but I am not able to dequeue the message. How do I retrive messages using pl/sql Thanks Message was edited by: sheebaann

  • Binding the html in MIME to container in view

    Hi All,             I have imported HTML object to MIME repository in the webdynpro component. I have also created the container for it in the view.. The problem : How do i bind this html file to the container in the view?? Thanks

  • Bad lens profile for 17-70mm F2.8-4 DC Macro HSM Contemporary?

    The profile seems OK in general, but fails very badly when the lens is wide open (at 2.8 - 3.5)... As you can see, the correction of vignetting is not working properly. Is any chance to fix this problem? At other apertures ( >3.5) vingetting correcto