SXMB_MONI Q Status

In file to file scenario at SXMB_MONI it displays the status as green and in the Q.Status it says STOPED. what is this error how to release that msgs

Hi,
clear the queues in SMQ2,first try to activate them..
You may need to re-register your queues.
Follow SXMB_ADM -> Manage Queues -> Deregister Queues
Afterwards, re-register the queues and activate from the same screen
3)Only use SMQ1 (outbound queues) and SMQ2 (inbound queues) if re-registering doesn't fix it. You will need to give the queues sometime to get activated so be patient
Regards,
satya...

Similar Messages

  • How to delete the messages from sxmb_moni with status cancelled

    Hi ,
    how to delete the messages from sxmb_moni with status cancelled
    Is there any report for this
    Regards
    Suman

    I think just for deleting the jobs you can do this only
    Scheduling Delete Jobs
    To schedule delete jobs, proceed as follows:
           1.      In the Integration Engine -
    > Administration menu, choose Schedule Delete Jobs.
           2.      Select the job(s) to be scheduled.
           3.      Specify the start time and date.
           4.      Specify the period you want to use and choose Schedule.
    For an overview of all jobs, choose Jobs.

  • SXMB_MONI: Outbound Status Red (Need Err Message Alerts)

    What is the best way to setup meaasge alerts in XI for a red flag in SXMB_MONI in the "Outbound Status" field? We currently have error messageing setup in ALERTCATDEF that will send an error message when the "Status" field is a red flag but I don't know if there is a way to point it to the "Outbound Status" also. We use the following short text in ALERTCATDEF for notification:
    System: &SXMS_ERRSRC_SYSNAME&
    POS XI Message ID:    &SXMS_MSG_GUID&
    POS XI Error Category:    &SXMS_ERROR_CAT&
    POS XI Error Code:    &SXMS_ERROR_CODE&
    I am thinking tha ALERTCATDEF will only send an alert when the "Status" field is red flag, and may not be possible to point to the "Outbound Status" field".
         Any suggestions?    Thank-You.

    Bill,
    2 questions here,
    1. Are alerts also triggered for outbound errors?
    Am not very sure but if i remember correct ,in one of our scenarios when there was an error in SM58 while posting the Idoc ( error on outbound side in MONI ) no alert was triggered.  I dont have any access to a server where alerts are working and so would just like to confirm if alerts are triggered also for Outbound side errors or are they triggered only for inbound errors?
    2.  If they are triggered for both, then wouldnt selectin NO RESTRICTION in where did the error occur suffice?
    Regards
    Bhavesh
    Message was edited by:
            Bhavesh Kantilal

  • XI3.0 SXMB_MONI - Message Status - Automatic Restart

    Hello,
    I am using XI3.0 to pass thu file from file server to BW system. When I pass the file , the file adapter log shows it passed nut in SXMB_MONI transaction the Status field shows the message as AUTOMATIC RESTART . After Half an hour or so it converts into chequered flag ie. converted successfully. I think the file remains in Queue.
    Can anyone suggest the cause and solution to this problem?
    Thanks,
    Pushpendra Srivastava

    Dimitry,
    I dont know if you can disable automatic restart, but you can try to delete messages from Integration Engine. There are various ways to do that.
    1. In ABAP-stack. Transaction SMQ2, try to delete all messages currently stored in queues or try to identify based on time the exact message that is restarting.
    2. In J2EE-stack. In RWB, go to Message Monitoring, select time frame when this message first occurred. After, there is a button cancel to cancel processing of each individual message.
       Hope this helps,
           Dmitriy Mindich

  • SXMB_MONI: Message status: Log Version ?

    Hi,
    We have a couple synchronous messages that have the "Log Version" status in the integration engine (ABAP stack – tcode: sxmb_moni).  It is a white circle icon. If we click on the legend (in sxmb_moni), we do not see this status … (we see all the others – green flag, race flag, etc)
    If we click in theses messages, only the following 4 pipeline steps are done (Inbound message + Receiver message + Interface Determination + Message Branching) … we do not see all the others (Request message mapping, … call adapter).
    What is the meaning of this status ?
    Thanks !

    from help.sap.com
    <i>This message version was generated by logging and does not have a particular status.</i>
    since yours is a sync scenario most probbaly what happend is that the response system was locked at the time request was send hence no response was received.
    we had the same problem and we re-send the message from sender system and it wen't through properly
    Thanx
    Aamir
    Note:i m still unable to figure out if its possible to re-send this from sxmb_moni,may be its not possible,also m not sure why we didn't get timeout error but got this one,may be some expert can shed some light on it.

  • Message scheduled in SXMB_MONI(Queue status is stoped)

    Hi experts,
    Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(this is not in XI). scheduled messages are not at all executing.. here i registered all queues.
    Please give me the solution how to reprocess the messages.
    thanks
    Srinivas

    hi ,
    1) Here i am selected message processing mode EOIO. which one is good EO or EOIO for process the messages asynchronously. If i choose EOIO I have to give queue name right? What name i have to give?
    It depends on the requirement.
    if your messages are related with the one another . means 2nd message will only process when 1st one is successfull.
    Then use EOIO.
    and no dependency is there then use EO.
    Naming convention is given is SAP library for sapxi.
    For EOIO use like :- XBQO*
    For EO use like :- XBTO*
    2) how to process again this messsages in receiver system. (I am doing using SMQ2 but this metthod is not for production system).
    Now if duplicate entries are there then delete all those messages first. and if it is going in Database then Delete the wrong and duplicate entries in the Tabel first.
    Then restart the right  messages. Goto SXMB_MONI then delete the duplicate messages.
    Regards,
    Sumit  Gupta
    Edited by: sumit gupta on Nov 12, 2009 1:30 PM
    Edited by: sumit gupta on Nov 12, 2009 1:31 PM

  • SXMB_MONI - Message Status - Automatic Restart

    Hello,
    When a message in transferred, in transaction SXMB the message has an "AUTOMATIC RESTART" icon. Other messages stuck in the queue and are waiting for the message to restart.
    Only after some time, the "AUTOMATIC RESTART" icon converts to "Red Flag" icon.
    I would like to know if there is a way to stop the "Automatic restart" of the messages in transaction SXMB_MONI.
    Please Advice,
    Dimitry

    Dimitry,
    I dont know if you can disable automatic restart, but you can try to delete messages from Integration Engine. There are various ways to do that.
    1. In ABAP-stack. Transaction SMQ2, try to delete all messages currently stored in queues or try to identify based on time the exact message that is restarting.
    2. In J2EE-stack. In RWB, go to Message Monitoring, select time frame when this message first occurred. After, there is a button cancel to cancel processing of each individual message.
       Hope this helps,
           Dmitriy Mindich

  • How to cancel messages in SXMB_MONI with status "No receive found"

    Dear All,
    I need to cancel message with error status as mentioned in captioned subject.
    Can you please guide me how to do it?
    Regards,
    Saras Jain

    One more thing to check.....confirm if there is any background job scheduled to cnacel the message once it goes into error....if it is cancelled in this manner...if so you wont be allowed to cancel the (already cancelled) message manually
    Regards,
    Abhishek.

  • Restart a process or message in SXMB_MONI with status "Cancelled Manually"

    SDN Crew,
    This is query regarding the BPM process.
    I have cancelled a process in MONI manually, Now i want to restart the process...
    If i try to restart the process, it throws an error "only messages with error could be restarted and messages already processed or cancelled could not be resatarted".
    How to solve the issue?
    and also i want to restart the process because though i set the Poll interval in the Send Comm Channel as 60 sec,  it processed only one message and that to in error(which i cancelled manually) no furthur processing is done i mean if u check for processed messages only one message is shown but it has to show similar error messages for every 60 sec?
    i am new to BPM so could someone tell lme if i am doin gsomewhere wrong?

    hi,
    its posible,
    take a look of this blog
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
    Thanks
    Rodrigo
    ps:reward points if useful

  • PE_Adapter status with gray colored arrow in sxmb_moni

    Hi ,
    I have one interesting problem to discuss,
    We are working in the production system and all archiving and deletion jobs are scheduled on weekly basis.
    Scenario is IDOC-->SOAP and BPM is also used. When checking in sxmb_moni the status of message is checkered flag but on the outbound side the status is green with scheduled for outbound processing. and when i display the message PE_ADAPTER's status is not checkered it is a gray colored arrow.and deletion and archiving job have not deleted only these messages.Also when i click on PE in sxmb_moni it doent take me to the BPM process steps it just refers to Inbound Queue.
    What i have done so far
    1. There is no entry in SMQ1,SMQ2,SWPR,SWPC,SWWL,SM58 for these messages.
    2. In message monitoring also when i check with the message ID as filtration criteria it is showing successful for integration engine.
    How to complete this PE_Adapter step of pipeline.
    or is that the case like new message was created for same process in sxmb_moni and the current messages are just to display.?
    Thanks in Advance.

    Hi Krishna,
    I have done everything related to queue, deregistering,registering and activating but still no luck, there is nothing in the queue and these messages are two months back. b'coz there status was incomplete , they were not deleted and in sap side Idoc dint get acknowlegement for these messages.

  • About status of  sxmb_moni

    HI
    Expert's
    my senario is BAPI -XI - XML
    When i am checking my messages in sxmb_moni  ,the status of flag is "logversion"
    what is type of error
    Regards
    upendra.v

    Error inthe sender RFC
    What is new in this thread that was not mentioned in your previous thread?
    Regards
    Bhavesh

  • Disabling "Application Error" to restart using restart button in sxmb_moni

    Hi Experts,
    I have a scenario of JDBC to inbound Proxy.In this we have created Fault message type to capture any error.The requirement is to disable the option of Restart in SXMB_MONI for application error generated with Fault message.We have done coding for generating application error in inbound proxy code.Looking for a quick reply.
    I am looking for disabling the "Application Error" generated from Fault message of inbound proxy to "Resart" using Resart button in SXMB_moni of Application system ECC.what I am referring to is how to disable u201Crestartu201D (not resend) of the messages in SXMB_MONI if they have errors.
    For example, the interface to load some entries calls a proxy which may load some messages successfully and some may result
    in errors. This would appear in the SXMB_MONI with application errors with restart capability. If the user restarts the message it will post the entries again which were successfully posted earlier. We would like to prevent this from happening.
    I have gone through the below links.But no luck.Please suggest me if anyone know the solution/hint for this.
    Proxy framework: Catch CX_AI_SYSTEM_FAULT
    Re: SXMB_MONI - Message Status - Automatic Restart
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

    I do not think you could do that as Asyn messages are always restartable. May be you should look at changing the proxy code so that it does not through application errors but instead would update a Ztable with list of items need to be reprocessed. And this can be sent to the JDBC system as reprocess request.
    VJ

  • IDOC to IDOC queue blockek status shows green flag

    Hi i' m doin an iDOcto idoc scenario.. in sxmb_moni the status flag is green...queue is blocked..  i tried activating the queue
    it still shows sysfail...
    this is the trace message... any problem with my design or the message passed.. or is it a queue problem if so how to handle
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">User: PI_RM_USER</Trace>
      <Trace level="1" type="T">Language: E</Trace>
      <Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
      <Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
      <Trace level="1" type="T">Syntax-Check-Flag</Trace>
      <Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
      <Trace level="1" type="T">Queueid</Trace>
    - <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
      <Trace level="1" type="T">Get the Metadata for port SAPDEC</Trace>
      <Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
      </Trace>
      <Trace level="1" type="T">Set Receiver Routing-object</Trace>
      <Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">
      <Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
      <Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_INT_PID: SAP_CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">system-ID = DIN</Trace>
      <Trace level="1" type="T">client = 100</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PI_RM_USER</Trace>
      <Trace level="1" type="Timestamp">2009-08-07T09:08:38Z CST</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 80144FDD6C661DEEA0E63CA33DA20911</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC">
      <Trace level="1" type="T">Queue name : XBTI0008</Trace>
      <Trace level="1" type="T">Generated prefixed queue name =</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">-----------------------------------------------------</Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">-----------------------------------------------------</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface COELEM.COELEM01</Trace>
      <Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
      </SAP:Trace>
    Edited by: Indudhar P.G on Aug 7, 2009 11:22 AM
    Edited by: Indudhar P.G on Aug 7, 2009 11:22 AM
    Edited by: Indudhar P.G on Aug 7, 2009 11:22 AM
    Edited by: Indudhar P.G on Aug 7, 2009 11:23 AM
    Edited by: Indudhar P.G on Aug 7, 2009 11:24 AM

    HI,
          Correctly said by Abhishek, click on Queue Id and then further selct the Queue and Click on details to see all the messages in that Queue. Select the First Message in SYS FAIL and try to restat that. If that again Fails. Don't delete the whole Queue but delete the  selected message from Queue in Error. Then go Back and Unlock the Queue and refresh. All messages behind this message will re-process automatically.
    SMQ1 and SMQ2 are tcodes foe Queues.
    REgards,
    Anurag

  • Resend XI Message RWD Status as System Error

    Hi All,
    The Message failed is due to FTP connection,  In SXMB_Moni the status of the message was succesfully processed. Where as when i check in Runtime Workbench, the status shows as "System Error" and Adapter Engine Status says the same as connection failed.
    When i tried to send the message from SXMB_MONI, it gives error message as " You cannot restart XML message DE43EEDA9B73E7F19797001F29E544F6 with this status/type"
    I tried from RWD by selecting the message & click on Resend again the same sort of error message
    Please let me know how to reprocess/resend the message, as the message was not send to the FTP.
    Thanks
    Bala L

    You cannot restart XML message DE43EEDA9B73E7F19797001F29E544F6 with this status/type
    check this blog to know how to solve the above problem:
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
    Please note that the suggestion mentioned in above blog is to be applied only if you are in Development Environment
    For some more reading: /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    Regards,
    Abhishek.

  • Status shows In Process in BPM

    Hi,
    One of the proceses in BPM shows "In Process" for the past 7 days. It does not allow further messages to be processed.
    Regards,
    Venkatesh

    Hi Michal,
    I checked both SMQ1 and SMQ2. There were no queues.
    I also checked SWWL but it says none of the entries to be deleted.
    But the same ID is existent in sxmb_moni_bpe with the status "In Process"
    In sxmb_moni the status flag is recorded for the last message.
    Many of the messages are there in adapter to be executed after this process.
    Regards,
    Venkatesh

Maybe you are looking for