Mavericks Broke connection with Windows Home Server - SMB

I have the original version of Windows home server and all connections were fine over SMB, but after the upgrade to maverick I cannot connect to my shares.
Before I used the guest account, so I created an addtional account for testing. I can see this account get locked out on the WHS, so I know its talking to it.
I have 6tb of photos and itunes data on my server and looking for any way possible to configure my imac to connect again. When I try now there is no error, the user name and pw box just shakes and produces no errors.
Please help
Thanks,
Tom

Reinfire,
I tried your terminal window patch but it failed to solve my issue. Most people seem to be trying to connect to NAS devices from their Macs. In my case, all my data is on a Drobo hanging off my Mac Pro. I've been using SMB to share video from my Mac to both a Boxee Box and a Raspberry Pi running Openelec (XBMC). While both these devices can handle afp, the old Boxee Box is less than astute with afp so SMB was the method of choice for stability.
Anyway, both devices can no longer see the SMB shares off the Mac Pro, even after your patch. After runnig you patch, I restarted and the nsmb.conf file is created. But, no luck on connecting with these apparently non SMB2 devices.
I can change all my shares over the afp but this will take a lot of button pushing that I'd rather not do. Any suggestions for this scenario?

Similar Messages

OS X client connecting to Windows 2003 Server SMB

My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem?

My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem?

TouchSmart 610z CyberLink Media Library Service issue with Windows Home Server Connector

After unboxing and configuring my TouchSmart 610z PC at one point I noticed that they TouchSmart "Photo" app stopped working. Whenever I launched the app, I would get an error message stating that "Cyberlink MediaLibrary Service has stopped".
I called HP support and after trying several things, the rep advised me to do a full system recovery (Factory Defaults).   After the recovery, I started configuring (installing software and tweaking settings) and at some point the same thing happened again. I tried to go back to various system restore points, but once the problem starts ocurring, it persists.
After another fully system recovery, I started installing/configuring things 1-by-1 and testing the Photo app after each step (VERY time-consuming). Finally I discovered that the "Windows Home Server Connector" software is what seems to cause the problem. The connector itself works as intended, but there seems to be some conflict with the TouchSmart Photo app that causes the error message to appear/persist.   For what it's worth, my Home Server is an HP MediaSmart Server EX475.
Anyone successfully connect their TouchSmart 610 to their home server and successfully run the TouchSmart Photo App?
Seems like this might be a bug of some sorts.

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

How can I istall Windows Server 2012 on a computer with Windows Home Server

I have troubles to install Windows Server 2012 R2. Quite in the beginning of the install I get the following announcement:
"Remove the installation media and restart your Computer so that Windows starts normally. Then, insert the installation media and restart the Computer."
In the first resrart Windows Home Server is starting and I can't go on installing Server 2012.
How can I bypass this problem?
Best regards
Nikorios
Nikorios

Hello,
on the Windows Core machine itself follow:
Determine the index number for a Server with a GUI image (for example, SERVERDATACENTER, not SERVERDATACENTERCORE) with Get-WindowsImage-ImagePath<path to wim>\install.wim.
•Run Install-WindowsFeatureServer-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

LDAP connection with windows catalogue server

Hi Gurus,
I want your help for below issue
Requirement is there is one customized table which will be accessed by SM30, user will enter user id and its email address should come automatically from windows global catalogue server(Non-SAP system), For this i referred one doc attached below
http://santy.wdfiles.com/local--files/sap-pages/SAP_User_Mgmt_Via_LDAP.pdf
According to this seems RFC creation, LDAP connector configuration, and LDAP server configuration required in SAP, i have asked basis team to do the same.
Now my question is is this the responsibility of Basis team to configure LDAP connector and LDAP server also how i can access LDAP directory through ABAP program?
please help me step by step if possible.

Reinfire,
I tried your terminal window patch but it failed to solve my issue. Most people seem to be trying to connect to NAS devices from their Macs. In my case, all my data is on a Drobo hanging off my Mac Pro. I've been using SMB to share video from my Mac to both a Boxee Box and a Raspberry Pi running Openelec (XBMC). While both these devices can handle afp, the old Boxee Box is less than astute with afp so SMB was the method of choice for stability.
Anyway, both devices can no longer see the SMB shares off the Mac Pro, even after your patch. After runnig you patch, I restarted and the nsmb.conf file is created. But, no luck on connecting with these apparently non SMB2 devices.
I can change all my shares over the afp but this will take a lot of button pushing that I'd rather not do. Any suggestions for this scenario?

Need help with a printer connected to a windows home server

I have a Windows Home Server that has a Brother laser printer connected to it via a USB cable. The printer driver is installed on the WHS and on each PC. My PCs on the network find the printer and can print to it with no problems. But, with my MBA, I'm having issues. I can see the printer as part of the server when installing/setting it up on the MBA and found the Ma printer driver from Brother and installed it on MBA. However, print jobs I send it never print out. What did I do wrong?

Your MBA should be able to detect the printer and locate the driver, install it and mount the printer. I have an HP5180 color all in one, which I have connected to my Windows PC, and my MBA sees it and prints to it just fine. Have you looked to see if Brother has a Mac driver for it?

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

ITunes very slow downloads of apps, podcasts, and music with library stored on a Windows Home Server (WHS)

First, some history. I setup a Windows Home Server (WHS) to store all my media. I had configured itunes to store its library at \\server\music (this would be whatever shared folder you choose to store your music on for your WHS (and possibly NAS box)) and itunes was managing my library. Once everything was imported into the server, I found I was getting horrible speeds for downloading apps, podcasts, and music. We are talking 10 minutes to download a 14Mb file on a Fibre connection where I consistently get 25 to 30Mb / second performance. Syncing my iPad / iPhones was a nightmare due to the time needed to be invested in it.
The server, the PC, the router and corresponding switches were all gigabit and yet I was getting dial-up speeds. Transfering files between systems was well within spec, but itunes was running as if it were using smoke signals. I spent some time searching various user groups and support sites to no avail.
To correct this, I only had to log onto the WHS (or NAS) and disable the iTunes Server.
Reboot of the server, reboot your iTunes PC, and you are good to go. My podcasts went from a 20 minute download time for an average episode of T.W.I.T. to about 7 to 10 seconds.

UPDATE
Please disregard the above. While the above did improve performance for a short time, the problem returned. I spent the next week running a full Spinrite on all 4 1TB HDDs that were in the NAS. All drives were fine. I then did some research on the individual drives, and it turns out that 3 of them were 7200RPM Hitachi's and the latest drive added was a 1TB Western Digital GREEN drive (WD10EADS). This was the source of the issue.
Additional information available at http://www.readynas.com/forum/viewtopic.php?f=24&t=32179
I replaced the WD10EADS with another 7200RPM drive (seagate this time) and the NAS has been working flawlessly again (again, disregard the above post)

Can my Macbook use an all-in-one connected to a Windows Home Server

Hey All, How do I connect my Canon Pixma MX700 to the Windows Home Server and be able to both Print and Scan from my Macbook over the network.

I just saw this post--it's for a different Canon than yours but it might point you in the right direction:
"The Canon MF6500 series uses the Canon UFR2 printer driver, which also supports the larger Canon multifunction copiers. If the printer is connected directly to the network via Ethernet, you use the More Printers > Canon IP (UFR2) option to enter the ip address of the printer. If the device is connected via USB, the Default browser view is used. In both cases, the user has no option to manually select the model in the print using menu. The driver communicates with the printer to determine which model it is.
If you have the printer connected via a Windows share, or to the USB port of a wireless router, the driver cannot 'see' the printer and will not complete the creation of the printer queue.
For a wireless router with Ethernet ports, you can connect the printer via Ethernet and then use the More Printers function. Of course the printer would require an Ethernet port for this to be possible, and I am not sure if you have such an option on the MF6500. If not, then you won't be able to use the printer the way you want.
FYI - the Apple Canon driver package is for the inkjet printers only.
PaHu"

Windows home server 2011 Backup with PC Windows 8 Pro - Backup failed (Unsuccessful)

On the PC under Windows 8 Pro, Event message: Backup job 1 on HCGSERVER did not succeed. Reason: ClientVssProblem, System.String[]
Windows Operating System; Version: 6.1.8800.16385; ID: 514;
On the Server, following message:An error prevented backup from creating a snapshot of volumes on this PC
Could you help on this issue? Many thanks in advance

Your Win8 PC is likely to have come with UEFI and uses GPT hard disks, so you need to install a hotfix on the server to allow it to back up the client PCs.
There’s a separate fix for each server version:
SBS 2011 Essentials
http://support.microsoft.com/kb/2781270
Windows Storage Server 2008R2 Essentials
http://support.microsoft.com/kb/2781274
Windows Home Server 2011
http://support.microsoft.com/kb/2781272
Install the hotfix, reboot the server, and you should be able to back up the PC, although in my experience, you also need to exclude any partitions on the PC that don't have drive letters.
John
-- John Murdoch APOJ Ltd

PS3 (playstation3) does not connect to Lenovo Ideacentre D400 Windows Home Server

I just got the Lenovo Ideacentre D400 Windows Home Server this week. After getting it setup, my computer connected to it fine and I transferred my files over (photos, music, videos).
It was time to test out the media sharing. Alas try as I might I was not able to get the PS3 (Playstation 3) to connect or even find the D400. Any thoughts ?
I searched the net and forums where i can usually find answers but found no mention of this device which I guess is not suprising since it is new. Let me know if anyone else has this and if they have any issues
ED

Generally disabling the Firewall helps in adding Xbox 360 to WMC.
I shall suggest you to post your problem here:
http://experts.windows.com/frms/windows_entertainment_and_connected_home/f/114.aspx
S.Sengupta, Windows Entertainment and Connected Home MVP

Can I sync Bookmarks from my Windows Home Server? I have a Shared folder called Favorites I use with IE9

I have my "Favorites" (Bookmarks) saved in a Shared folder on my Windows Home Server v1. I would like to use them as my Bookmarks in Firefox. Is there a way to do this, with or without the Sync feature?
Thanks

On iOS 5+ the photos will be sorted by their 'data modified' field, so you will need to adjust that on them to get them into a different order : http://support.apple.com/kb/HT4221
Or there are third-party photo management apps such as Photo Manager Pro which allow you to change their order within the app e.g. by name, date, or you can drag them into your own order

Home Sharing in Itunes 9 on Windows Home Server

I have installed iTunes 9 and have started using Home Sharing. I want to be able to use Home Sharing with my WHS (Windows Home Server) as our music is stored there and we have iTunes on all computers, plus 2 iphones and iPods.
This would need a Home Sharing server (service) to run on the WHS. Has Apple produced such a piece of software or can I install the Home Sharing component of iTunes 9 on my server? I am advised (by Microsoft) that installing iTunes 9 is not a good idea on WHS as WHS is designed to run services not user apps.
Any suggestions or has Apple someting in plan?
It seems that sharing between PCs is a bit behind the times when many people have moved over to Home Servers or NAS drives.

I too would like to would like to know how to implement iTunes on Windows Home Server (WHS) so my Music library can be stored on a redundant source that is always available to be accessed from any PC in the house. Does Apple have a way to do this or plans to create a product for WHS?
I understand Firefly can be used to stream music content on a WHS, but think this should be a complete iTunes solution with a common library and allow playlist storage from iTune clients that connect to it.

Windows Home Server and Apple TV 2

There are some old threads talking about Windows Home Server and the original Apple TV - the HP Windows Home Servers actually have excellent Mac support and out of the box with the Twonky Media Server that is bundled with the HP WIndows Home Servers would stream to the original Apple TV with no issue.
The wrinkle is the Apple TV 2 requires Home Sharing. I'm not going to debate good/bad - it is what it is. I was searching for a way to get my WHS working with my Apple TV 2 since I'm finally getting around to automating the transcoding of my Tivo files and I would much rather my WHS be my media server than my Mac. I came across this article that seems perfectly reasonable:
http://forum.wegotserved.com/index.php/topic/16359-whs-and-apple-tv-v2/
I haven't tried it yet, but it seems perfectly reasonable. Has anyone else tried it? I'll report back either way - if I remember to

"But can it be both simultaneously?
Both a server and a media machine that is showing a movie on your TV?"
Yes it can, no problems.
The Mini Server OSX is pretty much the same as the client Snow Leopard, complete with Front Row, iTunes, Mail, Safari etc, but no iLife09 supplied - you will have to pay extra for that.
It will do everything that Snow Leopard will do but has all the server capabilities too if you know how to set it up/use the software.
The only things I had trouble with was I can't find Migration Assistant and a strange quirk is that it won't share a USB connected printer across a network! No sign of printer sharing in System prefs but I guess you can do it via the Server config somewhere...
I just used CUPS to enable Bonjour printer sharing - works fine
I have been able to insatll everything I had on my previous CoreDuo Mini including Final Cut Express, iLife09, EyeTV, some bit torrent stuff - all works fine...
I really like the fact that I can plug two monitors in - I have the MiniDVI connected to a 50" plasma and 1080p Projector (using an HDMI splitter), the Mini Display port feeds a separate 20" widescreen monitor - when the plasma/PJ is switched off the main display automatically switches back to the 20" monitor
All in all this MiniServer is a great little HTPC - powerful and silent with 1TB of storage. The Server software is a bonus I haven't even looked at as yet

Mavericks Broke connection with Windows Home Server - SMB

Similar Messages

Maybe you are looking for