Max Log Disk Space isn't bigger than 1GB
Hi All,
Do you know reason why the log of gwia can't be set bigger than 1GB?
In console one, i can set it with my number but it is back to 1GB when press the apply button.
My log level is verbose.
This problem is not mentioned in the document also.
Regards,
Ndhuynh
On 23.01.2014 10:46, ndhuynh wrote:
>
> Hi All,
>
> Do you know reason why the log of gwia can't be set bigger than 1GB?
I assume because someone at sometime thought it would be a sensible
limit.
Kidding aside, I happen to agree. In fact, IMHO a single 1GB GWIA.LOG
actually is almost absurd and nothing but asking for trouble, even if
it's technically possible. Why in the world do you want to set the log
*that* big for a single file or let alone even bigger?
Wouldn't it be an option to set the log to rotate daily and if necessary
add in a cron job for instance that copies the resulting logs elsewhere
if you want to keep them forever?
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de
Similar Messages
-
IPhoto on Snow Leopard: importing videos or photos bigger than 1GB
Hi there, I use an iPad 3 and an iPhone 5 and 4S an in all of them I seem to not be able to import photos or videos bigger than 1GB to iPhoto (pre-installed) as it will keep waiting after I import all or selected files!
Any advice?iPhoto has always had a problem with importing larged videos. For large videos connect the iPad/iPhone to your Mac and use Image Capture to upload them to the Desktop before importing into iPhoto.
OT -
Disk space used much larger than actual files
I noticed this morning that Terminal was giving a warning about running out of swap space, which I thought was odd, as /var/vm was only at around ~10GB, but later when I tried to install some updates, I noticed that it said I only had 1.8MB free on my hard drive. I ran a df -h and it showed %iused at 100%. I immediately deleted some logs to free up a few megabytes of space and started hunting for what could have been hogging all my disk space, I seem to remember having 60GB free last time I checked. I was deleting a few small files, when I noticed this
bash-4.2# du -h -d 1
6.2M ./.DocumentRevisions-V100
584K ./.fseventsd
583M ./.Spotlight-V100
0B ./.Trashes
31G ./Applications
2.1M ./bin
20K ./cache
3.8G ./data
5.0K ./dev
34M ./Developer
1.3M ./EFI
1.0K ./home
8.9G ./Library
1.0K ./net
0B ./Network
185M ./opt
12G ./private
1.5M ./sbin
0B ./Shared Items
4.1G ./System
52G ./Users
4.9G ./usr
4.0K ./Volumes
117G
So apparently, according to du, I am only using 117GB of my hard drive. I immediately ran this
bash-4.2# df -h
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1 297Gi 283Gi 14Gi 96% 74220526 3630455 95% /
devfs 200Ki 200Ki 0Bi 100% 692 0 100% /dev
map -hosts 0Bi 0Bi 0Bi 100% 0 0 100% /net
map auto_home 0Bi 0Bi 0Bi 100% 0 0 100% /home
So my question is how is it that all of my files combined are using 117GB, including swap, but according to df, Disk Utility and Finder I am using 283GB? I am using FileVault 2, if that helps
Here's some more data
bash-4.2# diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
=========================================================
Name: Internal Hard Drive
Status: Online
Size: 319213174784 B (319.2 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 319213174784 B (319.2 GB)
|
+-> Logical Volume Family 80EF550B-053A-4DAF-8CC0-45D832CA8865
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 43CA4685-144B-450C-A2AD-30643D38D310
Disk: disk1
Status: Online
Size (Total): 318877626368 B (318.9 GB)
Size (Converted): -none-
Revertible: Yes (unlock and decryption required)
LV Name: Internal Hard Drive
Volume Name: Internal Hard Drive
Content Hint: Apple_HFS
Also, according to Activity Monitor I have 804MB of RAM free, but my VM size is 430GB. It also says Swap Used: 2.85GB, however /private/var/vm is at 8GB.
System profile is here:
Audio:
Intel High Definition Audio:
Audio ID: 31
Headphone:
Connection: Combination Output
Speaker:
Connection: Internal
Line Input:
Connection: Combination Input
Internal Microphone:
Connection: Internal
S/PDIF Optical Digital Audio Output:
Connection: Combination Output
External Microphone / iPhone Headset:
Connection: Combination Output
HDMI / DisplayPort Output:
Connection: Display
Devices:
AirPlay:
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 44100
Transport: AirPlay
Built-in Input:
Default Input Device: Yes
Input Channels: 2
Manufacturer: Apple Inc.
Current SampleRate: 44100
Transport: Built-in
Built-in Output:
Default Output Device: Yes
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 44100
Transport: Built-in
Soundflower (2ch):
Input Channels: 2
Manufacturer: ma++ ingalls for Cycling '74
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Soundflower (64ch):
Input Channels: 64
Manufacturer: ma++ ingalls for Cycling '74
Output Channels: 64
Current SampleRate: 44100
Transport: Unknown
After Effects 10.0:
Manufacturer: Apple, Inc.
Current SampleRate: 0
Transport: Unknown
AirParrot:
Input Channels: 2
Manufacturer: squirrels
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Bluetooth:
Apple Bluetooth Software Version: 4.1.4f2 12041
Hardware Settings:
Address: C8-BC-C8-F0-BC-A5
Manufacturer: Broadcom
Name: niles-macbook
Firmware Version: v41 c822
Bluetooth Power: On
Discoverable: Off
Vendor ID: 0x5ac
Product ID: 0x8218
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
When other items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
mouse:
Address: d4-9a-20-81-10-c2
Type: Mouse
Firmware Version: 0x84
Services: Apple Wireless Mouse
Paired: Yes
Favorite: No
Connected: Yes
Manufacturer: Apple (0x3, 0x31c)
Vendor ID: 0x5ac
Product ID: 0x30d
EDR Supported: No
eSCO Supported: No
Incoming Serial Ports:
Bluetooth-PDA-Sync:
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Bluetooth-Modem:
Address:
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 9/4/13 5:28 PM
Result: Passed
Disc Burning:
HL-DT-ST DVDRW GS23N:
Firmware Revision: SB10
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose File > Refresh Information
Ethernet Cards:
ethernet:
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x10de
Device ID: 0x0d7d
Subsystem Vendor ID: 0x106b
Subsystem ID: 0xcb89
Revision ID: 0x00a1
BSD name: en0
Kext name: nvenet.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/nvenet.kext
Version: 2.0.19
Firewall:
Firewall Settings:
Mode: Allow all incoming connections
Firewall Logging: Yes
Stealth Mode: Yes
Graphics/Displays:
NVIDIA GeForce 320M:
Chipset Model: NVIDIA GeForce 320M
Type: GPU
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x08a0
Revision ID: 0x00a2
ROM Revision: 3533
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 800
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Hardware:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB71.0039.B0E
SMC Version (system): 1.60f6
Serial Number (system): 4505005NGP6
Hardware UUID: 147BC83C-F831-52F6-976D-66749236DA55
Sudden Motion Sensor:
State: Enabled
Locations:
Automatic:
Active Location: Yes
Services:
Wi-Fi:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: c8:bc:c8:f0:d8:32
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16, 192.168/16
FTP Passive Mode: Yes
HTTP Proxy Enabled: No
HTTP Proxy Port: 6515
HTTP Proxy Server: 68.37.6.66
SOCKS Proxy Enabled: No
SOCKS Proxy Port: 9999
SOCKS Proxy Server: localhost
IEEE80211:
PowerEnabled: 1
RememberJoinedNetworks: 1
RequireAdminIBSS: 0
RequireAdminNetworkChange: 0
RequireAdminPowerToggle: 0
SMB:
NetBIOSName: niles-macbook
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: dc:2b:61:fc:1c:ec
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 127.0.0.1
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
SMB:
NetBIOSName: niles-macbook
VPN (PPTP):
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: Yes
Authorization Name: vpnbook
Authorization Password: A6935819-8F9B-4A32-A9E6-B7B3B69CAA86
Authorization Password Encryption: KeyChain
CCP Enabled: 1
CCP MPPE 128 Enabled: 1
CCP MPPE 40 Enabled: 1
Display Terminal Window: No
Redial Count: 1
Redial Enabled: No
Redial Interval: 5
Remote Address: euro195.vpnbook.com
Use Terminal Script: No
Dial on Demand: No
Disconnect on Fast User Switch: No
Disconnect on Idle: No
Disconnect on Idle Timer: 600
Disconnect on Logout: No
Disconnect on Sleep: No
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: No
LCP Echo Enabled: Yes
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: Yes
SMB:
NetBIOSName: niles-macbook
Bluetooth DUN:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial on Demand: No
Disconnect on Fast User Switch: Yes
Disconnect on Idle: Yes
Disconnect on Idle Timer: 600
Disconnect on Logout: Yes
Disconnect on Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
SMB:
NetBIOSName: niles-macbook
Memory:
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x0973B606
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x0933B66D
Network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
Has IP Assigned: Yes
IPv4 Addresses: 192.168.1.5
IPv4:
Addresses: 192.168.1.5
ARPResolvedHardwareAddress: 00:26:b8:5d:6b:ed
ARPResolvedIPAddress: 192.168.1.1
Configuration Method: DHCP
Interface Name: en1
Network Signature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:26:b8:5d:6b:ed
Router: 192.168.1.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Domain Name: homenetwork.internal
Server Addresses: 192.168.1.1
DHCP Server Responses:
Domain Name: homenetwork.internal
Domain Name Servers: 192.168.1.1
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.1.1
Server Identifier: 192.168.1.1
Subnet Mask: 255.255.255.0
Ethernet:
MAC Address: c8:bc:c8:f0:d8:32
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16, 192.168/16
FTP Passive Mode: Yes
HTTP Proxy Enabled: No
HTTP Proxy Port: 6515
HTTP Proxy Server: 68.37.6.66
SOCKS Proxy Enabled: No
SOCKS Proxy Port: 9999
SOCKS Proxy Server: localhost
Sleep Proxies:
1 Printer 1:
Marginal Power: 60
Metric: 703560
Portability: 35
Total Power: 63
Type: 70
Service Order: 0
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 127.0.0.1
Ethernet:
MAC Address: dc:2b:61:fc:1c:ec
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Service Order: 1
VPN (PPTP):
Type: PPP (PPTP)
BSD Device Name: ppp0
Has IP Assigned: Yes
IPv4 Addresses: 172.16.36.248
IPv4:
Addresses: 172.16.36.248
Configuration Method: PPP
Destination Addresses: 172.16.36.1
Interface Name: ppp0
Network Signature: VPN.RemoteAddress=euro195.vpnbook.com
Router: 172.16.36.1
ServerAddress: 93.115.84.195
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 195.60.76.114, 195.60.76.115
Supplemental Match Domains:
Supplemental Match Orders: 100000
Proxies:
FTP Passive Mode: Yes
Supplemental Match Domains:
Supplemental Match Orders: 100000
Service Order: 2
Bluetooth DUN:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
Service Order: 3
Power:
Battery Information:
Model Information:
Serial Number: W0043T3DRE1KB
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 164
Charge Information:
Charge Remaining (mAh): 4995
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5137
Health Information:
Cycle Count: 97
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1105
Voltage (mV): 12162
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Battery Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x00fce157
Charging: No
Printer Software:
Printers:
Printers:
Path: /Library/Printers/Brother/Filter/commandtobrother.bundle/Contents/Info.plist
Version: 1.0.5
Path: /Library/Printers/Brother/Filter/rastertobrother145.bundle/Contents/Info.plist
Version: 1.0.4
[Trimmed]
Path: /Library/Printers/Samsung/PDEs/JobRetention.bundle/Contents/Info.plist
Version: 1.05
Path: /Library/Printers/Samsung/PDEs/JobSetting.bundle/Contents/Info.plist
Version: 6.0
Path: /Library/Printers/Samsung/PDEs/Output.bundle/Contents/Info.plist
Version: 1.05
Path: /Library/Printers/Samsung/PDEs/Printer.bundle/Contents/Info.plist
Version: 1.05
Image Capture Devices:
Image Capture Devices:
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Info.plist
Version: 1.5.1
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceInfo.plist
Version: 1.5.1
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceMatchingInfo.plist
[Trimmed]
Path: /Library/Image Capture/Devices/HPScanner.app/Contents/Resources/DeviceMatchingInfo.plist
Version: 1.9.2
Image Capture Support:
Image Capture Support:
Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
Version: 2.3.0
Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/DeviceInfo.plist
Version: 2.3.0
Extensions:
Extensions:
Path: /System/Library/Extensions/AppleMobileDevice.kext
Version: 3.3.0
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleATAPIStorage.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleXserveRAID.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/FireWireStorageDeviceSpecifics.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/SonyXDCAMDriver.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/USBStorageDeviceSpecifics.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleUSBTopCase.kext
Version: 237.1
Path: /System/Library/Extensions/BJUSBLoad.kext
Version: 2.1.0
Path: /System/Library/Extensions/CellPhoneHelper.kext
Version: 1.2.6
Path: /System/Library/Extensions/hp_fax_io.kext
Version: 5.5.0
Path: /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
Version: 2.6.0
Path: /System/Library/Extensions/hp_Inkjet3_io_enabler.kext
Version: 3.3.0
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriver.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriverSafeBoot.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDUserClient.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOStreamFamily.kext/Contents/PlugIns/IOStreamUserClient.kext
Version: 1.1.0
Path: /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriverSafeBoot.kext
Version: 4.4.5
Path: /System/Library/Extensions/IOVideoFamily.kext/Contents/PlugIns/IOVideoDeviceUserClient.kext
Version: 1.2.0
Printers:
Printer 1:
Status: Idle
Print Server: Local
Driver Version: 1.0
Default: Yes
Shared: Yes
URI: dnssd://Printer%201._ipp._tcp.local./
PPD: HP Officejet Pro 8100-AirPrint
PPD File Version: 1.0
PostScript Version: (3010.000) 0
CUPS Version: 1.6.2 (cups-327.6)
Scanning support: No
Printer Commands: none
CUPS filters:
image/urf processed in Printer:
Fax support: No
PDEs:
Serial-ATA:
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
TOSHIBA MK3255GSXF:
Capacity: 320.07 GB (320,072,933,376 bytes)
Model: TOSHIBA MK3255GSXF
Revision: FH415B
Serial Number: 90TFF00PS
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 5400
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 319.21 GB (319,213,174,784 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
File System: Journaled HFS+
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 9938BA16-8F0C-3D96-829A-2AF41E6A4C76
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
HL-DT-ST DVDRW GS23N:
Model: HL-DT-ST DVDRW GS23N
Revision: SB10
Serial Number: KZ1A8TA3628
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
Software:
System Software Overview:
System Version: OS X 10.8.4 (12E55)
Kernel Version: Darwin 12.4.0
Boot Volume: Internal Hard Drive
Boot Mode: Normal
Computer Name: niles-macbook
User Name: System Administrator (root)
Secure Virtual Memory: Enabled
Time since boot: 2 days 19:13
Storage:
Internal Hard Drive:
Available: 15.79 GB (15,792,230,400 bytes)
Capacity: 318.88 GB (318,877,626,368 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk1
Volume UUID: 5A09BE44-23E3-301A-9831-E1C07F058FAB
Logical Volume:
Revertible: Yes (unlock and decryption required)
Encrypted: Yes
Encryption Type: AES-XTS
Locked: No
LV UUID: 43CA4685-144B-450C-A2AD-30643D38D310
Logical Volume Group:
Name: Internal Hard Drive
Size: 319.21 GB (319,213,174,784 bytes)
Free Space: 16.8 MB (16,777,216 bytes)
LVG UUID: 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
Physical Volumes:
disk0s2:
Media Name: TOSHIBA MK3255GSXF Media
Size: 319.21 GB (319,213,174,784 bytes)
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
Status: Online
S.M.A.R.T. Status: Verified
PV UUID: B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
Thunderbolt:
Thunderbolt: No hardware was found.
USB:
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x0d9d
PCI Revision ID: 0x00a2
PCI Vendor ID: 0x10de
Bus Number: 0x24
Built-in iSight:
Product ID: 0x8507
Vendor ID: 0x05ac (Apple Inc.)
Version: 4.42
Serial Number: 8JAC2190MDCJ5A00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x24600000 / 2
Current Available (mA): 500
Current Required (mA): 500
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x0d9d
PCI Revision ID: 0x00a2
PCI Vendor ID: 0x10de
Bus Number: 0x26
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0d9c
PCI Revision ID: 0x00a1
PCI Vendor ID: 0x10de
Bus Number: 0x04
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0d9c
PCI Revision ID: 0x00a1
PCI Vendor ID: 0x10de
Bus Number: 0x06
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06600000 / 3
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x8218
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.41
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06630000 / 6
Current Available (mA): 500
Current Required (mA): 0
Apple Internal Keyboard / Trackpad:
Product ID: 0x0236
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.90
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06300000 / 2
Current Available (mA): 500
Current Required (mA): 40
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Wi-Fi:
Software Versions:
CoreWLAN: 3.3 (330.15)
CoreWLANKit: 2.0.2 (202.10)
Menu Extra: 8.1 (810.9)
configd plug-in: 8.4 (840.22.1)
System Information: 8.3 (830.5)
IO80211 Family: 5.3 (530.4)
Diagnostics: 2.0 (200.24)
AirPort Utility: 6.3.1 (631.4)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x93)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.17)
MAC Address: c8:bc:c8:f0:d8:32
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
AirDrop: Supported
Status: Connected
Current Network Information:
XZ2PB:
PHY Mode: 802.11g
BSSID: 00:26:b8:5d:6b:f2
Channel: 6
Country Code: US
Network Type: Infrastructure
Security: WEP
Signal / Noise: -58 dBm / -91 dBm
Transmit Rate: 54The 300GB partition is the partition I am booting off of, and the one I was writing about. Disk0s1 is the EFI partition, 210MB. The other Internal hard drive is the core storage physical volume, already mounted, mounted in the image. Recovery HD is the 650MB system recovery partition.
I rebooted to the recovery partition and used Disk Utility to verify the volume, it said everything checked out alright.
In disk utility, the top entry has this data
Name : Internal Hard Drive Capacity : 319.21 GB (319,213,174,784 Bytes)
Type : Logical Volume Group Available : 16.8 MB (16,777,216 Bytes)
Disk Status : Online Used : 319.2 GB (319,196,397,568 Bytes)
However the other entry, right below it has this
Mount Point : / Capacity : 318.88 GB (318,877,626,368 Bytes)
Format : Encrypted Logical Partition Available : 202.18 GB (202,175,160,320 Bytes)
Owners Enabled : Yes Used : 116.7 GB (116,702,466,048 Bytes)
Number of Folders : 241,519 Number of Files : 1,246,454
So I guess the reboot fixed my problem, df -h now shows 37% used, but the logical vomume group still shows only 16MB free. Anyways, things seem to be working now. -
My disk space isn't increasing?
Hello,
I seem to have a problem with my Macbook Pro 13-inch (Mid 2014) with Retina Display,
I have 121 GB Flash Storage, and I have partitioned my disk into 2 parts, the first being my startup disk (70.72 GB) and the second, a secondary disk (49.62 GB). I recently got a message saying the my startup disk was full, and to free space on it(I had around 16.1 mb free), but when I delete Applications, Music, Videos, iDevice Backups etc., the free space remains 16.1 mb, and it's not increasing. I've also tried to repair disk permissions etc.
Could someone please help?
I'm on OSX Yosemite 10.10.1
Thank You!Download from the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all of your files and the respective sizes. You can use these to determine what discrepancies there may be.
Have you clicked on the HDD icon on the desk top to see what it says about the storage usage? This is from mine:
How does that compare with what is shown in Disk Utility?
Ciao -
User disk space available showing less than actually available on drive
Can anyone tell me why the space available to a user would be different, less than, that on the drive?
My user home folder is showing only 72Gb available, while I've actually still got some 350Gb available on the drive, which I can see in the finder by clicking on the drive. I certainly haven't manually given myself a quota or anything.
I am using encryption, file vault. And I'm using time machine.FileVault only encrypts the Home folder. It does so by creating a sparsebundle type of disc image file. Any space available information you see is related to the sparsebundle. As your Home folder expands in space usage so will the sparsebundle. However, if you remove files from the Home folder the sparsebundle will not shrink.
-
Pls immediate help required log files are getting big size than 1GB
oc4j_DBConsole_mbcvizpilot3.mbc.uae_vizrtdb\log
Do as follows :
- stop EM
- rename log directory to log.old
- create a new log directory
- restart EM
- check that new log files have been created in the new log directory
- after checking that everything works fine you can remove the old directory.
You shouldn't have any problem, at least I didn't have any... -
Running out of disk space error even tho I have 200GB free!!
Dear users,
I have a huge problem. I have dowloaded an application from the AppStore named "Virtual City" and once I try to play the game it crashes saying "Running out of disk space" even tho I have more than 200GB free on my hard disk.
I am using a MacBook Pro Mid April 2010 with Lion latest version.
What could be the problem??
Thanks in advance.
A.Did you try to reset your phone by holding the sleep and home button until the Apple logo comes back again?
Do you have an "other" section on your phone, bigger than 1GB? If yes, try to restore the phone to bring it back to normal size, it might contain corrupt data from an unsuccessful sync. -
You are running out of disk space error message
When i connect my iphone to itunes its continously tell me I am running out of disk space please delet some videos and photos and i have a ton of space available?
Did you try to reset your phone by holding the sleep and home button until the Apple logo comes back again?
Do you have an "other" section on your phone, bigger than 1GB? If yes, try to restore the phone to bring it back to normal size, it might contain corrupt data from an unsuccessful sync. -
Unallocated Disk Space after Recovery
I performed a system recovery to factory settings that resulted in my Disk space being distributed differently than before. I have a lot of unallocated space as you can see bellow. I need to know how to fix and how to prevent this from happening the next time I perform a recovery. Also, is it normal for the RECOVERY (D) partition to show multiple times in Disk Management ?
Thanks.
This question was solved.
View Solution.Hi,
You can extend the C partition into the 'unallocated space' as follows.
Once again, hold down the Windows Key and press R. Into the Run Box type compmgmt.msc and hit enter. Click Disk Management in the left pane and let the drives load up.
In the lower graphical view of the partitions, right click the C partition and select 'Extend Volume'.
In the following window, click Next.
In the next window, using the 'Select the amount of space in Mb' make sure that this is showing the same figure as the 'Maximum available space in Mb' figure that is listed just above ( adjust it if necessary ).
Then click on Next and click on Finish.
This may take a few minutes to complete.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
"out of disk space" error with Quicktime export
Hi - just trying to export a fairly small (3 minute) video sequence to record via iDVD. When I try to export the sequence as a Quicktime movie, I get an "out of disk space" error. I don't understand why - the video is not that big, and I have over 30 GB of free disk space. I suspect I'd be able to do it if I deselect the "self-contained" option - but I don't understand why 30 GB of disk space isn't enough.
Other details: FC Express 3.0Well, I thought everything had been rendered, but I'd missed a couple of transitions. When I tried to render those, I got another "out of memory" error. Turns out I'd misinterpreted what the "minimum scratch disk size" setting meant - it was set to 32000 MB - I thought that meant that 32 GB would be available for storage, but I guess it means that the 32 GB will NOT be available for storage.
Anyway, I changed that minimum to 10000 MB, and now everything works....
Thanks!
Bob P -
Free disk space significantly smaller after reinstalling
After installing the update for iTunes 8.0.2, I was one of the lucky few who couldn't get their macbooks to boot back up after shutting down after successfully rebooting.
After an apple care phone call and visit to the Genius Bar, all is good again.
But, at the Bar, they reinstalled leopard. I noticed just a little while ago that my free disk space is significantly less than what it was before all of this happened.
Do I need to delete the old install or something (where and how)? He didn't do any archiving as far as I could tell. He just plugged my macbook into the orange thing and reinstalled it.
Message was edited by: heymegothe guy at the genius bar clearly did an archive and install so that your old user data and applications were preserved. that creates a "Previous Systems" folder at the top level of the hard drive which contains your old system. If everything is working ok you should delete that folder and empty trash. once you do the lost space will be reclaimed.
-
Available disk space seems incorrect
Hello again everyone. Thank you for solving my problem last time. This time I come with another problem I haven't seen anyone else answer.
I think the title says it all. My laptop is telling me I have about 1GB left on my HD, but I KNOW there MUST be more available or there are a lot of hidden files that I can't find that are taking up gigs of space.
I know that this is not right because I have had gigs of video files or the like on here before and still have 20GBs left just fine. (The total HD space I think is 55GB.) I have been deleting file after file after file and it keeps going down and down and down even when I have not downloaded or added anything to it.
I have almost nothing left to delete save picture files which I definitely do not have 20GBs of.
Also, when I open Photoshop, the available disk space goes down significantly (about 1GB). I close PS, disk space comes back. I restart my computer, some more disk space will come back. The most I've been up to recently is 2GB.
If anyone has any ideas or solutions they are very much so appreciated. Thank you.Awesome program. And it seems to have confirmed my suspicions.
I scanned what I believed to be the biggest folders of stuff: Applications, Documents, Music, and Library. The total for the four was just under 14GBs. 55 - 14 = 41GBs. Is there something I could have missed? I don't have any movies and the pictures folder came up to about 60MBs.
Where have these 41GBs gone to~? -
RMAN9I HOW TO RESTORE ARCHIVE LOGS WITH LIMITED DISK SPACE
제품 : RMAN
작성날짜 : 2002-12-09
RMAN9I HOW TO RESTORE ARCHIVE LOGS WITH LIMITED DISK SPACE
==========================================================
PURPOSE
이 자료는 Oracle 9.2 이상의 RMAN에서 사용 가능한 MAXSIZE 기능에 대하여
설명할 것이다.
How to restore archive logs with limited disk space
Old Backup을 사용하여 RMAN으로 database를 recvoery할때, 모든 archived
redo logfile들을 Restore할 destination의 disk space가 모자란 경우를 종종 만난다.
이러한 경우 여러 개의 restore and recovery job으로 나누어 수행한다.
즉, 첫 번째 restore and recovery job이 끝나면 archived redo logfile들을 지우고
다음 적용될 것들을 restore한다. 그리고 다시 Recovery를 수행한다. 이러한 작업을
원하는 시점까지 recovery를 하기위해 반복적으로 수행한다.
Oracle 9iR2(9.2.0.x)부터 RMAN은 MAXSIZE option을 제공하는데 이것은 archive log
file이 restore될 disk의 space를 control할 수 있게 해 준다.
만약 disk space가 매우 제한적이라면, 즉 예를 들어 모든 archive log의 size 합보다
disk free space가 적다면 MAXSIZE option을 사용하는 것은 매우 유용하다.
이 OPTION이 기술되면 RMAN은 Media Manager에게 disk space 크기에 부합하는 만큼만
archive log들을 restore하도록 한다. 부가적인 restore operation들은 restore된
마지막 archive log가 적용될 때마다 발생한다.
MAXSIZE option은 이러한 작업들을 하나의 rman job으로 처리하게 해 주고
실수를 하지 않게 해 준다.
아래는 MAXSIZE를 설명하기 위한 예제이며 총 6 단계로 구성되어 있다.
STEP 1: Add data to the database to enforce log switches
STEP 2: Backup the database and archive logs and delete the logs
STEP 3: Add additional data to enforce new log switches
STEP 4: Remove the data file and simulate a database crash
STEP 5: Restore the data file from the backup
STEP 6: Recover the database using MAXSIZE
위 예제는 Unix와 Windows 모두에 적용될 수 있다.
STEP 6 는 다음과 같은 조건으로 두 번 수행될 것이다.
1) MAXSIZE가 archive log size보다 작은 경우:
이 경우 RMAN-6558 Error message를 만나게 된다.
그러므로 MAXSIZE를 archive log보다는 크게 설정해야한다.
2) MAXSIZE가 archive log size보다 큰 경우:
예를 들어 여러 개의 archive log를 포함할 수 있을 정도로 크게 설정하면
restore/recovery는 user에게 transparent하게 수행되어진다.
즉 archive log들은 restore된 후 applied되고 deleted되어 진다. 다시 새로운
archive log들이 restore되어지고 applied된 후 deleted 되어 진다. 이러한 작업은
recovery가 끝날 때까지 반복되어진다. 이러한 작업들이 진행되는 동안 RMAN은
아무런 Message도 발생시키지 않는다.
# Step 1: INSERT enough new data to generate log switches
create table rman_tst (col1 varchar2 (10));
begin
for i in 1..30000 loop
insert into rman_tst values(i,'test');
commit;
end loop;
end;
# Step 2: BACKUP the database and the archive logs automatically
# and then delete the input
run {
backup database format='/web01/usupport/krosenme/admin/backups/db_%d%s%t'
plus archivelog format='/web01/usupport/krosenme/admin/backups/arch_%d%s%t'
delete input;
# Step 3: INSERT enough new data to generate new log switches
begin
for i in 1..30000 loop
insert into rman_tst values(i,'test');
commit;
end loop;
end;
# Step 4: REMOVE users01.dbf file and crash the database
mv users01.dbf users01.org
shutdown abort
# Restore is now needed as the data file is deleted. The backup was
# taken before the new data was added to it, thus archive logs are
# needed to bring the database up to date
# Step 5: RESTORE the data file from the full backup
run {
restore datafile '/web01/usupport/krosenme/oradata/kro_920/users01.dbf';
# Step 6: RECOVER
run {
recover database delete archivelog maxsize 10 K;
# This will fail with RMAN-6558 as the archived log has a size of 16 KB,
# which is bigger than MAXSIZE limit of 10 KB. So the error is expected
# and MAXSIZE works as designed.
# Now rerunning STEP 6: but with MAXSIZE 50 K
run {
recover database delete archivelog maxsize 50 K;
RELATED DOCUMENTS
Recovery Manager Reference, Release 2 (9.2)cold backup means offline backup, you shut database normally and copy datafiles to another location.
i think operating system does not matter that much but it is RedHat Linux Enterprise Server.
backing up archivelogs whith rman script which is:
run {
allocate channel c1 type disk format '$BKUPLOC/arch_%d_%u_%s_%p.bkp';
change archivelog all validate;
sql 'ALTER SYSTEM ARCHIVE LOG CURRENT';
backup archivelog time between 'SYSDATE - (30*60/(60*60*24))' and 'sysdate';
release channel c1;
so here is the details.
1. because everything is lost, we restored all files(datafiles, controlfiles, redologs etc) from offline backup meaning copied all files from another location to corresponding location.
2. want to apply archive logs which were created after cold backup till disk failure and we have these archive logs with backups which were taken by rman.
So
first of all, we want to register these archive log rman backups(because these backup information does not exist in restored controlfile)
and then restore them and then apply them.
we need rman commands to register these backups and restore them.
Regards,
Kamil -
Logs are filling up disk space
Dear all
i am facing a problem in my database
the database is in archive log mode and continuous archiving of log is filling up the disk space
please let me know what should i do so that at the end of activity there should be no complaints of logs filling up
i wil ensure the big disk space
please let me know what kind of administration i have to do with this issue ...hello Sagar
when you use RMAN for backup you can set RETENTION POLICY for window of day or redundancy for example
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS;
or
RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
and when you backup use "BACKUP ... PLUS ARCHIVELOG" for example
BACKUP DEVICE TYPE sbt
DATABASE PLUS ARCHIVELOG;
it cause that RMAN when backup your database , backup your archived logs too ;
and about that two first CONFIGURE command
first command cause backupfiles and archived log files that backuped up before than 3 days signed obsolete in V$BACKUP_FILES view
(you can query the V$BACKUP_FILES view and check the OBSOLETE column)
second command cause backupfiles and archived log files that backuped up 3 times signed obsolete in V$BACKUP_FILES view
and if you use "DELETE OBSOLETE ..." command in RMAN it delete obsolete files
and your archived logs that backued up and are obsolete will be delete
AND you can use DBMS_SCHEDULER for synchronize this routine
Message was edited by: khosravi
khosravi -
MTA msg:MSLOCAL: Less than 1 kBytes of disk space available
I just started seeing these a few days ago and I know for a fact there is a huge amount of disk space on the server hosting the MTA, so I am not sure why these messages are appearing:
<01/25/12 04:11:51> DIS: MSLOCAL: Less than 1 kBytes of disk space available
<01/25/12 04:51:51> DIS: MSLOCAL: More than 1 kBytes of disk space available
The messages have show up a handfull of times since 1/20. Could not find anything on other forums, or in the KB. Any ideas?
Thanks in advance!This is the amount of LOG space configure for the POA ( see Console One --> POA Object --> logging configuration. ) You get this message when it exceeds the limit you specify and it has to clean up old logs to make room.... hence the "Less Than 1 KB" ( I deleted stuff ) "More Than 1 KB" pattern. You may just just started to exceed the size limit, and previously were just riding on the log file aging alone which would clean out old logs. You can up the limit if you want to ensure N-days of retained logs.
-- Bob
Maybe you are looking for
-
ITunes won't open because of audio configuration error
I updated iTunes, and now it says "iTunes cannot run because it has detected a problem with your audio configuration." How do I fix this?
-
I bought a Mac Pro last May, and today our mains fuse went, and it will no longer turn on. There is no smell of burning, and it is pretty dust free. I changed the fuse in the plug to no avail. Is there anything I can do? I don't have applecare. What
-
Why am I unable to select layers within the layout window - PSE13
I am working on a project in expert mode. It has several layers. Randomly, I am now unable to select any of the layers within the layout window. I have tried to drag or click on or over an element and nothing happens, it keeps selecting the same elem
-
Debug info from ZAction not visible in log file
Hi, i am trying to see debug info from my Z ActionClass in the log file. Debug messages from the standard actions from crm~avw applicaiton are visible. My ZAction is in the package com.customer and i have maintained this entry in VisualManager\LogMan
-
Installing Elements to MAcbook
Hi, how do you get adobe photoshop elements 8 on to a new macbook if it doesn't have a cd drive?