Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

Similar Messages

What is the Max Number of Total Work Process that we can Have on One C.I

Hi,
What is the Max Number of Total Work Process that we can have on a Single C.I
Is there any Limit that We can only have Perticular Number of Total work process ?
Or it is just Unlimited number of total work process
Thanks & Regards
Dan.

from the system throughput point of view a rule of a thumb is:
1 up to 4 sometimes 5 workprocesses per CPU.
(one is used in Benchmarks where you have a very small number of transactions running with a small amount of database accesses)
you can easily find it out:
configure 4 WPs per CPU. If you have a number of WP's consuming nearly no CPU time you can reduce the number of WPs.
regards
Peter

Max Number of threads per Process in Solaris 8

I'm running into qpplication which crashes with a segfault when the LWP for that process hits about 255, i'm trying to find the maximum number of threads per process using sysconf and its returning -1
#include <unistd.h>
int
main(void)
printf("%ld\n",sysconf(_SC_THREAD_THREADS_MAX));
return 0;
I'm using gcc 3.3.2
If anyone can tell me the maximum number of threads per process I would really appreicate it.
Also the maximum number of open files per process.
Thanks in advance
- Rodrick Brown
- DoITT

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

Max number of retries of error message in integration engine

Hi,
I have a scenario which is generating lot of email alerts if goes in error in SXMB_MONI....
so then i ticked the " suppress multiple alert " checkbox.....but because of this unless i complete one alert in the alert inbox another alert does not come ( considering that 1 alert comes and then after 5 hrs another error occurs for that same interface then that alert will not come unless we clear the previous alert from the alert inbox )
My requirement is everytime that interface goes in error EXACTLY 1 email alert should be generated

Hi,
After you configure the email alerts (without Suppers Multiple values) For every error you can get one email. For example one customer sends data that is failed due to Error "A" at this time you will get an email alert, again other message failed due to error "A" then you will get another email, means for the same error type you are getting multiple emails, to avoid this we can use Suppers Multiple alerts option.
In this case Mail doesn't comes to Alert Inbox also.
Regards,
Venkata Ramesh

Alter table reaching the max number of char 4000, CLOB? NCLOB?

I have a column is a table defined as a VARCHAR2(4000)
I try to alter the table
alter table sybaapc
MODIFY SYBAAPC_EXTRACURRICULAR VARCHAR2(5000)but it give me this error
ORA-00910: specified length too long for its datatype
I want the users to be able to enter more information on that column.
It seems that 4000 is the max we are in Oracle 10g
can I changed to CLOB or nclob, we already have data in that table?
What are the implications of changing it to clob or nclob,

Thats becuase the maximum character length for a table column is 4000.
Alternatively you can:
SQL> create table test_1 (col1 VARCHAR2(4000))
2 /
Table created.
SQL> insert into test_1 values(RPAD('*',4000,'*'));
1 row created.
SQL> commit;
Commit complete.
SQL> alter table test_1 modify (col1 clob);
alter table test_1 modify (col1 clob)
ERROR at line 1:
ORA-22858: invalid alteration of datatype
SQL> alter table test_1 add(col2 clob);
Table altered.
SQL> update test_1 set col2 = col1;
1 row updated.
SQL> commit;
Commit complete.
SQL> alter table test_1 drop column col1;
Table altered.
SQL> alter table test_1 rename column col2 to col1;
Table altered.
SQL> desc test_1
Name Null? Type
COL1 CLOB
SQL>
SQL> select * from test_1;
COL1
SQL> Edited by: AP on Aug 24, 2010 7:41 AM

Max number of char in textArea component

Hi gurus!
The thtmlb textArea component does not have the property maxlegth. How can I limit the maximum amount of caracters for this component?
Thanks!!!

check this blog.
/people/sap.user72/blog/2005/02/07/bsp-howto-show-a-progress-bar-for-limiting-text-input

XSTEPS- Process Message Configuration

Hi,
We are trying to use the process message PP_OPACT to confirm the activities on operation and we are gettign the following error message
"Parameter XXXX not intended for work centerXXXX"
Can anyone let us know how to resolve this error.
Also is there configuration where the symbols for the activities can be automtically populated for the process message PP_OPCON.
Thanks in Advance.
Sridhar

hi,
what are your standard value keys in workcenter?
and is it matching with your parameter entered in that char of process message??
regards,
sandeep

Restrict the number of processed messages in a time interval

Hi experts,
i have one problem to solve.
Is there a possibility to restrict the number of processed messages in single stack java pi 7.3 in some time intervals?
My problem is, that i have to restrict the messages from being sent only from 8:00 to 18:00 and there are restricted numbers that i can send in 15 minutes.
For example 2000 messages can be sent in 15 minutes, if more messages arive, they should be queued and be processed in the next 15 minutes.
Thank you in advance.
Richard

You're right in thinking that the behaviour you describe looks wrong.
Take a look at the QueueBrowser interface which can be used to inspect a queue. You get one using QueueSession.createBrowser(Queue). The QueueBrowser allows you to scan a queue without consuming the messages. However note that the state of the queue may change while you're observing it through the QueueBrowser so what you see might not always be a 100% accurate representation of the queue at any given time.
Other things to check:
- message selectors - are you setting a message selector on your queue receiver which is resulting in not all of the messages 'matching'.
- expired messages - are you setting a time-to-live on the messages that you publish.
Hope this helps,
David Ingham
http://www.arjuna.com

Outbound mails fails with error message number 826,Cannot process message,

Hi
We are in process of configuring outbound mail.
Profile parmeteres adapted are icm/server_port_0= PROT=SMTP,PORT=0,
is/SMTP/virt_host_0=:;and followed the notes 421359 for ICM Parameters
when we give the SMTP port number as 25,SMTP serveice in SMIC is not working and when we changed to 0 SMTP service is working.
Now the issue coming is we are not able to send the Mails to any domains and the error message in SOST is
*message number 826,Cannot process message, no route from XXXXX to XXXXX.com.*
Please suggest on how to over come the issue,are we missing any parameters or any other configurations.
All your help is highly Appreciated.
Regards
Swetha

HI
Did you check in SCOT?
SCOT>SMTP->Internet
SCOT>Settings-->Default Domain.
Please also check if you can telnet the SMTP server.
Anindya
Edited by: Anindya Bose on Mar 3, 2010 5:13 PM

TXT Message, Max Number of Contacts??

Hi
When sending a txt message, whats the max number of contacts u can send a message to? Since I've updates to iOS 4.1, I can only TXT 8 contacts at once.
Baz

Hi
My iPhone 4 isn't Jailbroken and has iOS 4.1 installed. Since my original post I've had a play about. This is exactly what happens:
1. I receive a txt message.
2. Select edit and the forward.
3. The To field is blank with the + symbol on the right.
4. I start to select the contacts I want to forward the txt to.
5. I get to ten contacts and the + symbol disappears
6. To add further contacts I touch the field where the txt is.
7. I touch the To field again.
8. The + symbol reappears and I can then start to add further contacts.
Is this normal?
Thanks
Baz
Message was edited by: BarryMcKelvey

Max number of connection for adapters

Hi PI/XI Experts,
I have a WS to Proxy Syncronous scenario. I need to know how many client could consume the web service at the same time? Are there any limitation? If so what is the max. number? and where it can be changed?
There is another question that how many of the WS clients message could be processed via ABAP Proxy? It is important to transport the all the messages to ABAP Proxy at the same time as much as possible.
Kind regards,
Altuğ Bayram

Hi Raj,
Where you get this knowledge? When i do search before this message i only found about RFC adapter max connection limitations. Every server/adapter should have a maximum capacity. Maybe it is high number for WS and XI adapters but i need to know what it is. If you how can i find it please share the information.
Kind regards,
Altuğ Bayram

Max number of concurrent users?

I'm in the process of creating a web site with Cold Fusion and
Oracle. One concern involves the lack of web hosting services
that run Oracle on their servers. So, to get around this
problem, I was considering replicating an Oracle lite database
and putting it on an ISP's server. My thinking is that there
would be little need of DBA functions and I can run it on any
server I choose. But ....
1. Would Oracle 8i lite support a lot of concurrent users?
2. What other factors would I have to consider if I set it up
as a distributed DB ?
Any help on these thoughts would be greatly appreciated.
Charles
null

          Thank you Mark.
          "Mark Griffith" <[email protected]> wrote:
          >Jyothi:
          >
          >Sadly there is not an option to throttle the server in this manner. You
          >will/would have to restrict the QueueLength, which is an excluded property
          >on the ExecuteQueue defintion.
          >
          >http://edocs.bea.com/wls/docs81/javadocs/weblogic/management/configuration/ExecuteQueueMBean.html
          >
          >But this is only a very gross/general level of the server queuing execute
          >requests and isnt fine tuned to just servlets like you want it to be.
          >
          >Cheers
          >mbg
          >
          >"jyothi prabhu" <[email protected]> wrote in message
          >news:3ed04a70$[email protected]..
          >>
          >> Hello everybody,
          >>
          >> is it possible to set max. number of concurrent users accessing
          >weblogic server
          >> through a login servlet? For example, is it possible that at a given
          >point of
          >> time, maximum n users can be logged onto weblogic server while accessing
          >a web
          >> application.
          >>
          >> thanks.
          >
          >

Error while processing message

I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
any ideas?
Kfir

In RFC channel increase the maximum connections paramter value to 5. Save and activate.
Thanks,
Gujjeti

Windows No Disk - Exception Processing Message

I just got this error when trying to open my Adobe Premier 7.0 out of the blue... Windows - No Disk. Exception Processing Message... anyone know how to fix this?

Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt

Windows - No Disk Exception Processing Message on iTunes start-up

Every time I start up iTunes I get this annoying Windows Error Message.
Windows – No Disk
Exception Processing Message c000001e Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c
Cancel Try Again Continue
If I click any combination of the three buttons many times it eventually goes away.
Then, it also happens when doing any operation with a song file such as conveting format or it rate. In this case it may lock up iTunes and require a C-A-D to get out of the application.
HELP!!
I've tried updating the iTunes software
Medion Windows XP
Medion Windows XP

Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt

Max number of chars in process message MSEL?

Similar Messages

Maybe you are looking for