Max number of content items in one folder

Hi,
What would be the max limit content item dumped in one folder???
Thanks

Take a look, for instance, at this link: http://hishamgalal.blogspot.com/2012/01/increase-maximum-number-of-folders-and.html
There is no factual limit. Only, when there are too many items in one folder, the system does not perform well. Therefore, you may adjust the maximum number of allowed items by two parameters mentioned on the linked page.

Similar Messages

Retrive all the items under one folder

Hi,
I am new to ContentArea API's in 9ias.
I am looking for Sepecific API's to retrive all the Items
under one folder.
thanks
sha

I'd love to know that API also. I have resorted to accessing the tables containing that information.
wwv_corners contains an entry for each folder. wwv_things contains an entry for each folder item. You can join the two tables as
wwv_corners.id = wwv_things.cornerid
You could do something like:
select folders.name, items.id
from portal30.wwv_corners folders
,portal30.wwv_things items
where folders.id = items.cornerid
and folders.id = 99999;
(where 99999 is the folder id.)
Mike Kleiman

Max number of TCP connections to one IP?

Is there any limit, imposed by the TCP protocol, to the number of active connections to one IP address on one interface?
I'm asking this because it's easy to add more servers behind a load balancer, but I wonder if the TCP protocol limits in some fundamental way the number of connections to the load balancer itself.
Let's say there's an ACE 4710 load balancer in front of a bunch of Web servers. The balancer exposes one IP address to the clients on the public network. The connections are forwarded to the Web servers on the private network. The balancer is also doing NAT: the servers see the connections originating on a private IP on the load balancer.
On the client side, each connection is uniquely identified by the quartet (source IP, source port, dest IP, dest port). So as long as each client only creates one connection, I think the limit here is just the amount of RAM on the load balancer.
On the server side, same thing, each connection is identified by the same quartet, so I guess the theoretical limit here is 64k connections per server, due to the limit imposed by the source port numbers on the load balancer.
OTOH, if the load balancer is not doing NAT (the servers see the connections originating on the public IPs of the clients), then there should be no limit imposed by the TCP protocol.
Is that right? Comments?

you got it right.
Gilles.

Max number of content types per list/library

What is the maximum number of content types for a list or library?
I read a thread on this forum where they talk about a maximum of 2000 content types per library for SP 2013:
http://social.msdn.microsoft.com/Forums/en-US/c53df140-8ed6-4438-8a49-95cdc6ac5fd5/number-of-content-types-per-library?forum=sharepointgeneral
Is this also true for lists in SP 2010?
Thanks for your help!
Thorsten

Hello Thorsten,
I don't see a hard limit in the capacity management article on Technet:
http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#ListLibrary
But I do see limits to number of columns, which of course has a correlation to content types.
- Dennis | Netherlands | Blog |
Twitter

How to search content items in the folder( include subfolders) with API?

I want use UCM API to search contents in the folders including subfolders. I need a example code. thank you !

If you have Folders properly installed, Standard Search form will have 'Folder' field and 'Include subfolders' check box. This means that you can use normal http function call to get results.
Example:
http://content.ravenna.com/idc/idcplg?IdcService=GET_SEARCH_RESULTS&QueryText=&SearchQueryFormat=UNIVERSAL&ftx=&AdvSearch=True&folderChildren=7&ResultCount=20&SortField=dInDate&SortOrder=Desc

Inherit metadata not working when content is moved from one folder to another

Hi All,
I have a unique situation for which i would like to know if there is any solution.
We have WebCenter Content 11.1.1.8.0 installed with Framework folders, Accounts and RoleEntityACL (Access Control List-ACL) enabled.
We are not using Accounts, but are using ACL since we want the end users to be able to modify the content access permissions.
Now as per documentation - Managing Content Repositories section 11.2.3.2.1 What You Should Know About Item Level Security
The following occurs in Oracle Content Server on setting custom permissions for a file or folder from the Item Level Security dialog:
The account is changed to account WCILS/original_account.
All users are by default granted RWDA on account WCILS. Changing the account to WCILS/original_account ensures that only the custom permissions determine the security on the content.
The ACL content metadata fields, xClbraUserList and xClbraRoleList are updated with the custom permissions.
The content metadata field, xInhibitUpdate is set to true, to prevent ILS from overwriting an item's own custom security with a parent folder's custom permissions.
Now when i am copying or moving any item from one folder to another folder, it does not inherits the Roles Access Control Lists, User Access Lists of the destination folder in which i am copy the content. It does not inherit the other metadata values like comments and a few more custom metadata value.
I understand that this is due to the xInhibitUpdate metadata field, mentioned above.
Is there any way to override the xIhibitUpdate metadata field and set it to false?
Does anyone know what event is fired when we perform the copy or move of a content item?
Thank in advance
Amit

Any response will be helpful

Can we open more than one "folder" at a time in Bridge?

When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
Please alleviate my ignorance.

Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
Not so quick way: Select menu File => New Window. Open the second folder there.
If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
1) View the parent folder in bridge.
2) Open the Filter palette.
3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

High Response Times with 50 content items in a Publisher 6.5 portlet

Folks,
Have set up a load test, running with a single user, in which new News Article content items are inserted into a Publisher 6.5 portlet created of the News Portlet template. Inserts have good response times through 25 or so content items in the portlet. Then response times become linearly longer, until it takes ten minutes to insert a content item, when there are 160 content items already.
This is a test system that is experiencing no other problems. There are no other users on the system, only the single test user in LoadRunner, inserting one content item at a time. The actual size of the content item is tiny. Memory usage in the Publisher JVM (as seein on the Diagnostics page) does not vary from 87% used with 13% free. So I asked for a DB Trace, to determine if there were long-running queries. I can provide this on request, it zips to less than 700k.
Have seldom seen this kind of linear scalability!
Looked at the trace through SQL Server Profiler. There are several items running for more than one second, the Audit Logout EventClass repeatedly occurs with long durations (ten minutes and more). The users are publisher user, workflow user, an NT user and one DatabaseMail transaction taking 286173 ms.
In most cases there is no TextData, and the ApplicationName is i-net opta 2000 (which looks like a JDBC driver) in the longest-running cases.
Nevertheless, for the short running queries, there are many (hundreds) of calls to exec sp_execute and IF @@TRANCOUNT > 0 ROLLBACK TRAN. This is most of what fills the log. This is strange because only a few records were actually inserted successfully, during the course of the test. I see numerous calls to sp_prepexec related to the main table in question, PCSCONTENTITEMS, but very short duration (no apparent problems) on the execution of the stored procedures. Completed usually within 20ms.
I am unble to tell if a session has an active request but is being blocked, or is blocking others... can anyone with SQL Server DBA knowledge help me interpret these results?
Thanks !!!
Robert

hmmm....is this the ootb news portlet? does it keep all content items in one publisher folder? if so then it is probably trying to re-publish that entire folder for every content item and choking on multiple republish executes. i dont think that ootb portlet was meant to cover a use case of multiple content item inserts so quickly. by definition newsworth stuff should not happen to need bulk inserts. is there another way to insert all of the items using publisher admin and then do one publish for all?
i know in past migration efforts when i've written utilities to migrate from legacy to publisher the inserts and saves for each item took a couple of seconds each. the publishing was done at the end and took quite a long time.

BEA's Publisher - Display Published Content Items

I'm using BEA's Publisher product with ALUI. I want to have a simple portlet that just displays Content Items that I've published, but after playing with it for a couple of hours, I find myself stuck.
I have a Data Entry template that just takes a name and a file, and a presentation template associated with that. But I can't figure out how to make the presentation template display a list of published content items associated with the Data Entry template.
I tried using the Tag Helper and I saw that the file properties were available, e.g. name, location, length, however I can't get the template to actually display the information.
Also, since I can't publish said presentation template (you aren't allowed to publish a presentation template associated with a data entry template), I have to make ANOTHER presentation template, and include the first one, and then make a new portlet that displays that second template. Is this how it's supposed to work? It seems awfully complicated for such a simple task.
I would greatly appreciate any input anyone can give. Thanks!
Edited by: user10704201 on Dec 12, 2008 12:32 PM

" I can't figure out how to make the presentation template display a list of published content items associated with the Data Entry template. "
While I believe that this is a correct statement, you can't use pcs:foreach to get all items associated with a DET, I think that what you really want is to display all the content items in a folder or in a list. The 2 ways I most commonly do it are:
use a list
1) create a DET for the main portlet item (for example, news stories) with a property of type list
2) create a DET for the type of item that goes into the list (for example, news article)
3) create a Content Item based on your main portlet item DET
4) add items to the list
5) iterate through the list in your presentation template (pcs:foreach expr="item.myList" var="mylistvar"...)
You can also tell each news article to automatically add itself to the news stories list. (Look in the DET for this setting)
use a folder
you can also just create your list items in a folder and then loop through the folder (pcs:foreach expr="folderByPath(item.folder,"folderName")"...

Max number of sessions in the database for abt a month

Hi,
We are adding around 1000 additional users to our 11g database, how to find the impact of CPU, Memory etc.. And also we would like to know max number of sessions in last one month. Please let us know how to get this info.
Thanks in advance.
Edited by: 934825 on Dec 7, 2012 7:55 AM

vlethakula wrote:
You can join
dba_hist_resource_limit and dba_hist_snapshot
SELECT a.begin_interval_time, a.end_interval_time,
b.resource_name, b.current_utilization,
b.max_utilization
FROM dba_hist_resource_limit b, dba_hist_snapshot a
WHERE a.snap_id = b.snap_id AND b.resource_name = 'sessions'
ORDER BY a.begin_interval_timeDon't forget that the use of these DBA_HIST* views or their underlying tables requires a license for the performance pack.

Max number of file descriptors in 32 vs 64 bit compilation

Hi,
I compiled a simple C app (with Solaris CC compiler) that attempts to open 10000 file descriptors using fopen(). It runs just fine when compile in 64-bit mode (with previously setting �ulimit �S -n 10000�).
However, when I compile it in 32-bit mode it fails to open more than 253 files. Call to system(�ulimit �a�) suggests that �nofiles (descriptors) 10000�.
Did anybody ever see similar problem before?
Thanks in advance,
Mikhail

On 32-bit Solaris, the stdio "FILE" struct stores the file descriptor (an integer) in an 8-bit field. WIth 3 files opened automatically at program start (stdin, stdout, stderr), that leaves 253 available file descriptors.
This limitation stems from early versions of Unix and Solaris, and must be maintained to allow old binaries to continue to work. That is, the layout of the FILE struct is wired into old programs, and thus cannot be changed.
When 64-bit Solaris was introduced, there was no compatibility issue, since there were no old 64-bit binaries . The limit of 256 file descriptors in stdio was removed by making the field larger. In addition, the layout of the FILE struct is hidden from user programs, so that future changes are possible, should become necessary.
To work around the limit, you can play some games with dup() and closing the original descriptor to make it available for use with a new file, or you can arrange to have fewer than the max number of files open at one time.
A new interface for stdio is being implemented to allow a large number of files to be open at one time. I don't know when it will be available or for which versions of Solaris.

What is the maximum number of line items we can enter in an order...

Hi,
Can anyone explain what is the max number of line items that v can enter in an order....
or if i want to increase the number of line items than the max where it is controlled.
Because my mm counter part is facing this in the PO he could make only 9999,the problem is when posting...the accounting document is not getting generated bcas of exceeding the limit.
venugopal

hi,
this is my personal experiance that we can enter at the most 499 line items in SALES ORDER.
This is because for every line item there will be 2 financial entries, debit and credit. and 1 FI document can have at the most 999 line items (which we can not increase without KEY fromSAP)
If we divide 999 by 2 then it comes to 499.50 so you can enter at the most 499 line items in Sales order.
Regards
Vishal

Max number of partial delivery

Hi,
In the sales Order screen mentioned that partial delivery for one sales order number is 9.
It means that Max number of delivery document related one sales order is 9.
Is it possible to have more than 9 delivery document for one sales order?
Is it any way to change?
Thanks,

Hi,
I believe the settings are maintained in the customer master, sales area data, shipping tab.
Nevertheless, you can create as many partial deliveries as you want for the single sales order. If however you cross the max number of partial deliveries maintained in the customer master, the system just gives an INFORMATION pop-up saying that the max number has been crossed.
Hopefully this is helpful.
JP.

Max number of items exceeded?

I am trying to develop a questionaire like application. Most of the logic is stored inside pl/sql functions (that is retrieving the previous or next question with possible answers and answer-types, like, eg. radiogroup, select-list, textarea, ...) while all of the questions and respective possible answers are kept inside a collection. In processing the answers after submit I store given answers inside the same collection, basically by nullifying all possibly previously given answers for the current question and then looping through eg, g_f01.count to refill. The entire application remains on the same page, showing eg., in one 'frame', one or two questions with say 7 checkboxes and two textareas.
Everything seems to work fine, I can go forward and backward and will find new questions or ones that already have been answerd, but!!...
after the 50st item (answer), that is after I reached the 50st radiogroup, checkbox or textarea, new checkboxes or radiogroups even though shown the resulting values will not be stored inside the collection anymore.
generating the page i use:
htp.prn(apex_item.radiogroup(p_idx => 1, p_value => c2.a_id, p_selected_value => c2.qa_id, p_attributes => 'id="P2_QUEST_' || i || '"'));
and in processing correspondingly ...
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
FOR c2 IN
(SELECT seq_id,
c001 q_id,
c002 a_id,
c012 qa_id
FROM apex_collections
WHERE c001 = to_char(p_q_id)
AND collection_name = 'ANSWERS'
AND c002 = apex_application.g_f01(i))
LOOP
apex_collection.update_member_attribute(p_collection_name =>
'ANSWERS', p_seq => c2.seq_id, p_attr_number => '12',
p_attr_value => c2.a_id);
END LOOP;
END LOOP;
to me I only use f01 ... f04 say, ... Is it possible that I still hit the max of 50 page-items?
Regards
j.

max number of items exceeded?

Can I create multiple presentation templates against one content item?

I want to create multiple presentation templates that publish the same content item in different ways.
As far as I can tell from the publisher GUI this is not possible.
Am I missing something?

It may not be feasible to have two PT associated with a DT technically. But there is a workaround / solution for your requirement. thats what i meant in my prev post.
To accomplish your requirement in a simple fashion try doing this
1) copy the contents of all PT, DT and Content Items with all its folders in the _NEWS (portlet templates) folder to a new folder called 'PortletA' (or) make use of the News portlet template to create a portlet
2) Now modify the DT's and PT's according to your requirement.
3) Create a portlet using "Published Content" webservice and configure the 'Main' to your portlet.
4) if you create and pblish new article, you can find two html's are getting published.
If this doesn't resolve your requirement,
Create two sets of Dt & Pt's. In the article PT, try to add the other Pt as "related items to publish", so on publishing one the other one gets published.
Bharat Karthik
[email protected]
http://www.eminenttech.com/
Edited by bharatkarthik at 09/05/2007 2:35 PM

Max number of content items in one folder

Similar Messages

Maybe you are looking for