MaxDB 7.8 error upgrading from EHP4 to EHP5

I'm upgrading ECC600 from EHP4 to EHP5 (ramp-up release) in a Maxdb 7.8 and Linux Suse 11 environment.
The source release have an 7.01 kernel.
With sapehpi, in the phase PREP_INTEGRATION/TABSPC_PREP, I have an error in GDBSSHD.LOG file:
TPERR- error in dbdd_get_size: 2
TPERR- msg: POS(60) Unknown column name:OWNER
Accordingly with notes 1142632 and 1447663, I installed the new 7.01 kernel (version 117) without changes.
I copied also the new dbsdbslib.so file in the installation directory, but there are no changes.
Any suggestion?
Thanks

Unfortunatelly, after the correction, I try to restart the SAPehpi and in the PREP_INTEGRATION/TABSPC_PREP phase I had another similar error; in the TABSPCP.LOG file there are this message:
4EETQ399 Execution of 'tp getdbobjsize' failed, rc=1
In the file TP.ECO the error is:
TRACE-INFO: 1: [dev trc     ,00000] Thu Apr 14 09:59:00 2011                                                         1789 0.001789
TRACE-INFO: 2: [dlux.c      ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so") FAILED
TRACE-INFO: 3:                          "/sapdb/DVDEHP5/EHPI/abap/exe/dbsdbslib.so: cannot open shared object file: No such file or directory"
TRACE-INFO: 4:                                                                                34 0.001823
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
tp finished with return code: 249
meaning:
connect failed due to DbSL load lib failure
I try the R3trans -d command but in the trans.log file there is the message:
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so' ...           118 0.000702
4 ETW000 [dlux.c      ,00000] *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/IBS/SYS/exe/run/dbsdbslib.so") FAILED
4 ETW000                          "/usr/sap/IBS/SYS/exe/run/dbsdbslib.so: cannot open shared object file: No such file or directory"
4 ETW000                                                                                272 0.000974
4 ETW000 [dbcon.c     ,00000] *** ERROR => Couldn't load library '/usr/sap/IBS/SYS/exe/run/dbsdbslib.so'
of course the file exists and I copied the same that are in exe and exenew directory.
Any suggestions?

Similar Messages

Eror upgrading from EHP4 to EHP5 , Database : MAxDB 7.8.0.14

Hello
I have updated Max db from 7.6 to 7.8 recenlty required to Upgrade ECC6.0 EHP5
Current ECC 6.0 EHP4 , NW 7.00 EHP1
Below is the i am getting while upgrading EHP5 through SAPEHpi
TOOLOUT.LOG-->
SAPehpi> Starting subprocess tp.exe with id 5580 at 20110503154658
EXECUTING tp.exe pf=J:\EHP5_INST\EHPI\abap\bin\DEFAULT.TPP getdbinfo WT9
Environment: JAVA_HOME=C:\j2sdk1.4.2_11
Environment: PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_11\bin;E:\usr\sap\WT9\SYS\exe\uc\NTAMD64;E:\sdb\programs\bin;E:\sdb\programs\pgm;E:\usr\sap\WT9\SYS\exe\uc\NTAMD64
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
Environment: auth_shadow_upgrade=0
Environment: dbms_type=SDB
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
HALT 20110503154658
ERROR: *Cannot determine database version, database type is not defined in profile. [tpconnect.c,1158]*ERROR: EXIT(16) -> process ID is: 3176
Process with ID 3176 terminated with status 204
Please help
Regads
Jain Pankaj

> EXECUTING tp.exe pf=J:\EHP5_INST\EHPI\abap\bin\DEFAULT.TPP getdbinfo WT9
> Environment: JAVA_HOME=C:\j2sdk1.4.2_11
You Java version is 32bit and is ancient where you platform seems to be 64bit. I highly suggest using a recent JDK.
> Environment: dbms_type=SDB
I guess this is the problem, dbms_type must be "ADA".
Markus

Excel layout changed after EHP5 upgrade from EHP4.

Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
Thanks

Hi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description                        Material                               Sales doc.
IRB 2600 M2004                 3HAC020536-018              104861
IRB 2600 M2004                 3HAC020536-018              2BT0615486
OLD Format
Production plan
                                      Description                    Material                               Sales doc.
                                      IRB 2600 M2004            3HAC020536-018               104861
                                      IRB 2600 M2004            3HAC020536-018               2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

[error]Upgrading from FRAMEMAKER 6 to 8

Hi
I have upgrade from FRAMEMAKER 6 to FRAMEMAKER 8 with the upgrade and now all my links are broken.
The error i have is that he can't open a document because he can't find it
In FRAMEMAKER my link are openObjectID Partie11.FM:253461
and when i save the book to a PDF all my link are broken
Thanks for help

Jean-Joseph,
In all likelihood, this is just indicative of not having all of the
files converted to v.8 format when working at the book level.
The first time you open a book, you will get prompted about opening an
older version FM. The same goes for any of the book component files.
You should use the option to open all files in a book (by holding down
the shift key and select File > Open All Files), deal with the prompts
and then do a shift+File > Save All Files) to ensure that they have
been saved in the FM8 format.
As long as you haven't moved your files in between upgrades, things
should work as before.
Also, there are several patches to FM8 that you should install in
patch order. See:
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows

Error - Upgrading from 12 0 4 to 12 0 6

Hello:
We are in the process of upgrading from 11 5 9 to R12.
To be exact, we are upgrading from 12 0 4 to 12 0 6 on DB 10.2.0.4.
The upgrade process errored on OMNDIAGMYGRATE.sql . Found an exact hit in Metalink (bug No 7115209).
But no resolution found on the bug.
Any idea ? Appreciate your help
Thanks

Looks like the bug is still open with no solution yet (11/21/08 03:22 am). Again, I would suggest you log a SR.

Error Upgrading from the Evaluation Version of Microsoft Lync Server 2013

Hi,
I try to upgrade from Evaluation to full Version using:
http://technet.microsoft.com/en-us/library/gg521005.aspx
but after i run: msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb
i get a popup:
"Another version of this product is already installed. installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel."
Get-CsServerVersion :-> Microsoft Lync Server 2013 (5.0.8308.0): Evaluation license key installed.
Any ideea?

Hi Iulius
As your upgrading the Licence on the Lync 2013 FE it shouldn't care about the Lync 2010 Environment. As your moving from Eval to Full Licence on 2013. I have come across the below url that might help.
http://pei.com/2013/03/how-to-change-lync-license-from-evaluation-to-licensed/
http://jackstromberg.com/2013/02/how-to-activate-lync-evaluation-to-licensed-version/
I would personally go with from Lync Management Shell with Elevated Permission
cd /
cd /d: (Other what other drive letter)
cd /Setup\Amd64\Setup
msiexec.exe /fvomus Server.msi EVALTOFULL=1 /qb
But that's just me Id rather run the command from the directory than pointing to it.
Regards
Andrew Price

PL/SQL errors upgrading from 8i to 10g

I have a number of packages and functions that were created before my time on oracle 8i that work great there, however I am trying to upgrade the database to Oracle 10G and most all of the packages and functions are now invalid.
Here is an example
Line # = 4 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 22 Column # = 18 Error Text = PL/SQL: ORA-00942: table or view does not exist
This is TBORGESON.STVM_PRESHIPTOPRESHIPTRANS
(The_Date in date)
AS
Begin
Insert Into Aswihart.PreshipTrans SELECT a.ID, a.WorkOrderType, a.WorkOrderBaseID,
a.WorkOrderLotID , a.WorkOrderSplitID, a.WorkOrderSubID, a.CustomerID, a.MWPartNumber,
a.CustomerPartNumber, a.CustomerOrderNumber, a.CustomerOrderLineNumber,
a.PurchaseOrderNumber, a.CustomerName, a.CustomerAddr1, a.CustomerAddr2,
a.CustomerAddr3, a.CustomerCity, a.CustomerState, a.CustomerZipCode,
a.CustomerCountry, a.CustomerShowAddr1, a.CustomerShowAddr2, a.CustomerShowAddr3,
a.CustomerShowAddr4, a.CustomerShowAddr5, a.BillToName, a.BillToAddr1, a.BillToAddr2,
a.BillToAddr3, a.BillToCity, a.BillToState, a.BillToZipCode, a.BillToCountry,
a.BillToShowAddr1, a.BillToShowAddr2, a.BillToShowAddr3, a.BillToShowAddr4, a.BillToShowAddr5,
a.DesiredQuantity, a.WantDate, a.QuantityShipped, a.ShipDate, a.NetWeight, a.GrossWeight,
a.AddWeight, a.CalcWeight, a.Territory, a.Unit, a.Price, a.OrderDate, a.RevisionNumber,
a.ShipVia, a.Packages, a.PackingSlip, a.LotNumber, a.Description, a.BillOfLading,
a.ShippingInstructions, a.ShippingInstructions2,
a.ToBeBilled, a.IsInvoiced, a.UnitPrice, a.CurrentDate, a.Class, a.ProductCode,
UPPER(NVL(StockLocation,'SHIPPING')) AS location, a.Salesman,
a.Worksheet, a.Certification, a.Status, a.Initials, a.ProductQuantity, a.StockQuantity,
a.Plant2, a.SCAC, a.NoCont, a.ContType, a.NoSP, a.QuantitySP, a.BarSerial, a.ASN,
a.Tare, a.APW, a.Sample, a.ACT, a.ConsPt, a.UserName, a.CurrentTime, a.LocationCode, a.ProductInStock, a.SpecialPacking, a.SpecialPackingInstructions, a.BarCodeFormat, a.CarrierCode, a.DockNumber, a.SupplierCode, a.ModelYear, a.MaterialIssuer, a.PoolPoint, a.PoolPointAddress, a.EDIAccumShipQty, 'FG' AS Warehouse
FROM aswihart.preship a WHERE (((a.QuantityShipped)>0) AND (a.ShipDate <= The_Date) AND (ltrim(rtrim(a.packingslip)) is not null) AND ((a.ToBeBilled)='Y') AND ((a.IsInvoiced)='N'));
end;
I’m not sure what needs changed to get this to work. The table aswihart.preship definitely does exist, in a different schema in the same database.
Doug Hatfield
Information Systems Manager
Mathew-Warren Spring Division
(574) 722-8397
[email protected]

Hi,
you need to grant rights from the owner of the table to the user who ownes the package. In 10g some roles have less rights, so this lost the user rights on the table. So start to make a grant select and insert on the table:
grant select,insert on preship to TBORGESON;See if this helps and get more compiled packages.
Herald ten Dam
htendam.wordpress.com

Error upgrading from APEX 4.0.1.00.03 to 4.1.1

I receive this error. In my opinion the problem could be related to the presence of one personalized authentication schemas, based on a DB function, taken from a Packaged application, some years ago, called "menu_framework".
This is the error report:
-- Now beginning upgrade. This will take several minutes.-------
-- Ensuring template names are unique -------
-- Migrating metadata to new schema -------
-- Switching builder to new schema -------
begin
ERRORE alla riga 1:
ORA-00600: codice di errore interno, argomenti: [kgiinb_invalid_obj],
[0x26962168], [0x1A1042F4], [], [], [], [], [], [], [], [], []
1) after the error trap, I copied the Image folder and tried to launch APEX. It was possible to lunch the development pages, but impossible to execute any application with the error: Authentication Schema not Supported
2) then decided to downgrade to APEX 4.0, following the proper instructions: received a similar error:
SQL> exec apex_040000.wwv_flow_upgrade.switch_schemas('APEX_040100','APEX_040000
BEGIN apex_040000.wwv_flow_upgrade.switch_schemas('APEX_040100','APEX_040000');
END;
ERRORE alla riga 1:
ORA-00600: codice di errore interno, argomenti: [kgiinb_invalid_obj],
[0x16D5D9E4], [0x27F2074C], [], [], [], [], [], [], [], [], []
The execution of application reported the same problem.
Then decided to restore the entirre DB.
Where is my problem?
Are my suspects real or the Authentication schema malfunctiong is a conseguence of the upgrade error?
Thank you, Angelo

I think this has something to do with your database and now APEX is affected. I don't think it is an APEX issue. Which version of database are you using? Maybe you should patch it to a more stable version.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

ECC6.0 - upgrade from EHP4 to EHP6 - cross release transports.

Hi Experts
We are planning to upgrade our system from ECC6.0 -EHP4 to EHP6.
Source - ECC6.0-EHP4
Target - ECC6.0-EHP6(Enhancement pack6)
Current ECC version -
SAP_BASIS 701 0014 SAPKB70114 SAP Basis Component
SAP_APPL 604 0013 SAPKH60413 Logistics and Accounting
We would like to know during the project if we can do a transport
between upgraded development ECC6.0 -EHP6 to non upgrade production ECC6.0-EHP4.
We have data from note 1090842 and 1273566.
But last 10 lines of note 1090842 are contradictory wherein on one side it says you can do transports between Releases 7.0*, 7.3* and 7.4* and
on other it says it can be problem if support pack levels are different on same release.(if problem can happen on same release with different pack
level then there are greater chances of issues between different releases).Note 1273566 is clear and suggest no issues exist yet for
technical and logical transports between suggested version 700/701 to >=702
Also below is the extract from SUM guide - (SUM-1.0-SP07)
RECOMMENDATION
We strongly recommend that you perform transports only between systems of the same release or enhancement package level, and where the same business functions are activated. If you do not follow this recommendation, you do so at your own risk regarding potential problems.
Please suggest if we need to create Dual maintainance parallel landscape during the tenure of project where two development system co-exist.One
with current and one with upgraded version and changes need to be done on both in parallel.Support fixes and LTO’s go from non upgraded dev to non upgraded prod.
Thanks

Hello
I won't perform cross version transport even if it can be possible.
As of 7.02 cross version transport are prevented by default with option SP_TRANS_SYNC (see here under note).
The best way is, if possible, to have a manual dual maintenance. All corrections created in the Ehp4 dev should be manually recreated in the Ehp6 dev.
What is usually done is to upgrade at first a copy of production for test/discovery purpose, the aim is to identify most of the regressions/evolutions. This will reduce the time you will have to spend in the migrated dev to adjust your system. You then migrate dev and enter in a freeze period where you reduce activity on legacy Ehp4 system to the minimum (bug correction for prod).
One good thing with the manual reprocessing of changes on the Ehp6 system is that this kind of constraint will help consultants to reduce their activity.
Regards
1742547 - Information about component version check in TMS

HT4848 I have errors upgrading from os x 10.6.8 to 10.8

I have been using a Mac Mini 2.4 GHz Intel Core 2 Duo and upgraded to 8 Gb 1067 MHz DDR3 now downloaded and installed 10.8 online from app store from 10.6.8 and had many errors and crashes. Back to using 10.6.8 now. I did hard drive clean and reinstall twice. Often keyboard freezes. Crashes became more and more frequent. I may just stay with 10.6.8 because at least it is stable and working well. But, is it possible to go back to 10.8? How? Thanks!

Here are the error messages:
8/21/12 12:06:29 PM Install OS X Mountain Lion[657] Error loading /Applications/Install OS X Mountain Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage: dlopen(/Applications/Install OS X Mountain Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage, 265): Library not loaded: /usr/lib/libcsfde.dylib
Referenced from: /Applications/Install OS X Mountain Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage
Reason: image not found
8/21/12 12:08:16 PM [0x0-0x2c02c].com.apple.InstallAssistant.MountainLion[657] nvram: nvram is not supported on this system
8/21/12 12:08:29 PM [0x0-0x2c02c].com.apple.InstallAssistant.MountainLion[657] Could not find IODeviceTree:/options
8/21/12 12:08:34 PM Install OS X Mountain Lion[657] NSDistantObject (0x11af37d50) is invalid (no connection)

Error upgrading from weblogic 7 to weblogic 10.3

We are upgrading app from weblogic 7 to 10.3. Thie app compiles ok and every page before the login is displayed successfully. When we try to login we are getting the following error:
Exception in thread "main" java.lang.AbstractMethodError: weblogic.xml.schema.binding.BeanCodecBase.getCompositor()Lweblogic/xml/schema/binding/ModelGroupCompositor;
     at weblogic.xml.schema.binding.BeanCodecBase.gatherContents(BeanCodecBase.java:299)
     at weblogic.xml.schema.binding.CodecBase.serializeFill(CodecBase.java:297)
     at weblogic.xml.schema.binding.CodecBase.serialize_internal(CodecBase.java:234)
     at weblogic.xml.schema.binding.CodecBase.serialize(CodecBase.java:193)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:192)
     at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:178)
     at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:335)
     at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:304)
     at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:651)
     at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:209)
     at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:146)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
     at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
     at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:306)
     at com.workscape.aws.examples.weblogic.clientclases.PINService_PortType_Stub.authenticateUser(Unknown Source)
could someone advise how to fix this problem?
Thanks in advance

Hi,
Your EJB 2.1 application should deploy and run fine on WLS 10.3 without modification.
- Matt

Multiple errors upgrading from snow leopard to mountain lion

While attempting to upgrade on an early 2008 Mac Pro, I received the "could not create recovery disk" error on install and had to abort the upgrade. I found online a suggestion of decreasing the size if the main partition (I have no other partitions on the system drive) by a little so that 10.8 can create the recovery drive. When I went I do this it started the process then gave me the error that "I need a newer version of OS X" to complete the task.
I can't create the partition 10.8 needs because I don't have 10.8?
I desperately need a workaround. Any insight would be greatly appreciated, I can offer more details if needed. I do know that the system drive is not a RAID volume, and apples page concerning this error didn't seem to apply to doing an upgrade like this.
Thanks all for your help!!

I followed these steps. install gave me the same errors. as far as creating a recovery system goes, since im in snow leopard, i could only intall mountain lion on an external drive. im not sure that really fulfilled the requirements of creating the recovery hd i needed, coulndt find instructions on simply creating a recovery HD on an eternal disk. i did also notice that my internal mac HD system drive is HSF+, or so it appears. could that be the trouble all along?
EDIT: Just reconfirmed as Macintosh HD - Mac OS Extended journaled), so scratch that. i guess im just having trouble "creating a recovery HD" i cannot get the recovery assistant app, because im on snow leopard

Error Upgrading from iPhoto 6.0.2 to 6.0.4 / Application Not Found

I am trying to upgrade iPhoto from 6.0.2 to 6.0.4 and it is telling me that I don't have a valid copy of iPhoto in the application folder. Does anyone have any ideas?
Message was edited by: nowake

Where did you get the Installer? If you got it from Software Update, try use the one from here:
http://www.apple.com/support/downloads/iphoto604.html
If you got that one, try use Software Update.
Regards
TD

Error upgrading from 11.1.1.3 to 11.1.1.5 - bimiddleware not deployed

I got the following issue after upgrade to 11.1.1.5
####<May 21, 2011 12:33:01 PM ART> <Error> <Deployer> <wuhan.ar.most> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <df6f0ceab78a2168:1a65b590:130132fbc47:-8000-0000000000000003> <1305991981512> <BEA-149231> <Unable to set the activation state to true for the application 'bimiddleware [Version=11.1.1]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "LocationSvcPort" failed to preload on startup in Web application: "analytics/actions".
java.lang.SecurityException: WSM-06303 : The method "registerListener" was not called with required permission "oracle.wsm.policyaccess"
I already run bi-upgrade.py, that supposly will update my system-jazn-data.xml

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

HTML DB 2.0 Install Error (upgrade from 1.6)

The following message was displayed at the end of my HTML DB 2.0 install:
ERRORS EXIST!!!
...There are 1 errors in the log table!
...Select upgrade_error from WWV_FLOW_UPGRADE_PROGRESS to review errors.
This is the row in WWV_FLOW_UPGRADE_PROGRESS with an error:
1 9/14/2005 9:13:46 PM 168 row ins error ORA-00001: unique constraint (FLOWS_020000.WWV_FLOW_FLOW_PK) violated 4411
HTML DB 2.0 seems to work as do the converted apps... Do I need to do anything to fix this error? Will it cause problems down the road? I couldn't find anything in the forum or install guide so any help is appreciated.

I had 2 errors reported in the same place, unique constraint violated. I'm rebooting both of my servers now (database and Application server), so I'll soon find out if it's important or not. :^)
Bill Ferguson

MaxDB 7.8 error upgrading from EHP4 to EHP5

Similar Messages

Maybe you are looking for