How to access web server with SSH client

I need to access my web server via SSH. I do not have clue how to go about. I have transmit for ftp but looks like I cannot use SSH with Tranmit.
I guess I need to know:
- What ssh client to I need to get?
- If not detailed instruction provided How do I go about? I know I need the port # and my ip address and I have both of those but not sure what else I am to do.
TIA for the help!

Open up Terminal. It's in the Utilities folder.ssh -p <port#> <ipaddress> or, if you need to log on with a different user namessh -p <port#> <username>@<ipaddress>

Similar Messages

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

How to access application server 10g, if client machine is proxy settings.

hi,
i have installed oracle application server 10gR2, on vertual machine, windows2003
my forms are stored in forms folder , i can access the application/forms
throuhg client machines, if proxy setting is unchecked, but if proxy is chacked can't access application.
as there with the user machine is required with proxy setting. how
to access the application. i mean what is the configuration.
in application server so that any computer (client machine)
can access weather it is having proxy setting or not.

now i enabled the java console to see the trace, there i found. if proxy is checked in client brouser with 8080 port which is required by organisation.
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\fresh
Proxy Configuration: Manual Configuration
Proxy: eproxy:8080
Proxy Overrides:
Jar cache disabled by user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Where as if there if i remove proxy setting by uncheck. then application goes smoothly.

How to Access Web service with ADF Mobile Browser Application

hi all,
My Jdeveloper version is 11g 2 release(Version 11.1.2.2.0). I need to know If I create a web application and put it on a server as a web service., Then I create a Mobile browser application and need to access that web service.
If it is possible, how should I do? version are same in both application.
hopping any clue..
Thxs.

You can go thru the below links :
ADF Mobile HowTos: Consuming SOAP web service in ADF Mobile using WS DC
Oracle JDeveloper 11g Release 2 Tutorials - Building Mobile Applications with Oracle ADF Mobile

How to access web services with Javascript

I want to create a XUL/Javascript form which uses CRM On Demand web services. At this time I cannot login (no sample code is given for javascript), therefore I generate my JSESSIONID separately, try and put it in the URL I call in my code, but the server answers back with the logon.jsp page.
     function test()
var xmlToSend = "<soapenv:Envelope xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:con='urn:crmondemand/ws/contact/' xmlns:con1='urn:/crmondemand/xml/contact'>";
     xmlToSend += "<soapenv:Header/>";
     xmlToSend += "<soapenv:Body>";
     xmlToSend += "<con:ContactWS_ContactQueryPage_Input>";
     xmlToSend += "<con1:ListOfContact>";
     xmlToSend += "<con1:Contact>";
     xmlToSend += "<con1:ContactId></con1:ContactId>";
     xmlToSend += "<con1:AccountId></con1:AccountId>";
     xmlToSend += "<con1:ContactEmail>= '[email protected]'</con1:ContactEmail>";
     xmlToSend += "<con1:ContactFirstName></con1:ContactFirstName>";
     xmlToSend += "<con1:ContactFullName></con1:ContactFullName>";
     xmlToSend += "<con1:ContactLastName></con1:ContactLastName>";
     xmlToSend += "<con1:AccountName></con1:AccountName>";
     xmlToSend += "</con1:Contact>";
     xmlToSend += "</con1:ListOfContact>";
     xmlToSend += "</con:ContactWS_ContactQueryPage_Input";
     xmlToSend += "</soapenv:Body>";
     xmlToSend += "</soapenv:Envelope>";
var xmlhttp;
     xmlhttp = new XMLHttpRequest();
     xmlhttp.overrideMimeType('text/xml');
     xmlhttp.onreadystatechange=DisplayContact;
     xmlhttp.open("POST", "https://secure-ausomxdsa.crmondemand.com/", false);
     xmlhttp.setRequestHeader('Man', 'POST /Services/Integration;JSESSIONID=blablabla HTTP/1.1');
     xmlhttp.setRequestHeader('Content-Type', 'text/xml');
     xmlhttp.setRequestHeader('Content-Length', xmlToSend.length);
     xmlhttp.setRequestHeader('SOAPAction', 'document/urn:crmondemand/ws/contact/:ContactQueryPage');
function DisplayContact()
          if (xmlhttp.readyState==4) {
               if (xmlhttp.status==200) {
                    var response = xmlhttp.responseXML;
                    var responsetxt = (new XMLSerializer()).serializeToString(response);
                    document.write(responsetxt);
The result is: responsetxt always contains the HTML code of logon.jsp.
Anyone could help with a login code, or with the interrogation.
Jeremy

Hi,
A JS Sample....
You can use this JS in a Web Applet
_____________________________________________ START OF FILE _____________________________________________
<html>
<head>
<script type="text/javascript">
var sso_token='%%%SSO Token%%%' // You can use an OCOD Variable in OCOD Web Applet
sso_token = sso_token.replace(/\+/g, "%2B");//re-Encondig SSO-Token
alert (sso_token);
//////////////////////////////////// getInnerText() ////////////////////////////////////////
function getInnerText(node) {
if (typeof node.textContent != 'undefined') {
return node.textContent;
else if (typeof node.innerText != 'undefined') {
return node.innerText;
else if (typeof node.text != 'undefined') {
return node.text;
else {
switch (node.nodeType) {
case 3:
case 4:
return node.nodeValue;
break;
case 1:
case 11:
var innerText = '';
for (var i = 0; i < node.childNodes.length; i++) {
innerText += getInnerText(node.childNodes);
return innerText;
break;
default:
return '';
//////////////////////////////////// sso_login() ////////////////////////////////////////
//https://server/Services/SSOTokenValidate?odSsoToken = "ssotoken value"
//https://server/Services/Integration?command=ssologin&odSsoToken="ssotoken value"
var ajax=null;
var browser = navigator.appName;
if(browser == "Microsoft Internet Explorer"){
     ajax = new ActiveXObject("Microsoft.XMLHTTP");
}else{
     ajax = new XMLHttpRequest();
function SSO_Login() {
//var url = 'https://secure-ausomxdsa.crmondemand.com/Services/SSOTokenValidate?odSsoToken='+sso_token; // Check SSO Token
var url = 'https://secure-ausomxdsa.crmondemand.com/Services/Integration?command=ssologin&odSsoToken='+sso_token;
ajax.open("HEAD", url, true);
ajax.onreadystatechange = getReponse;
ajax.send(null);
//////////////////////////////////// Login() ////////////////////////////////////////
var ajax=null;
var browser = navigator.appName;
if(browser == "Microsoft Internet Explorer"){
     ajax = new ActiveXObject("Microsoft.XMLHTTP");
}else{
     ajax = new XMLHttpRequest();
function Login() {
var url = 'https://secure-ausomxdsa.crmondemand.com/Services/Integration?command=login';
ajax.open("HEAD", url, true);
ajax.onreadystatechange = getReponse;
ajax.setRequestHeader('UserName','GLABADEN-FR13-15/WSUserName');
ajax.setRequestHeader('Password','OnDemandPassword');
ajax.send(null);
//////////////////////////////////// getReponse() ////////////////////////////////////////
function getReponse(){
     switch(ajax.readyState){
          case 0:
          case 1:
               //open com
          break;
          case 2:
               //send query
          break;
          case 3:
               //recieving data
          break;
          case 4:
               //data received
               //ajax.status contient 200, 404, ...
               //ajax.statusText contient OK, NOT FOUND, ...
               var reponseTexte= ajax.responseText;
               var responseXml= ajax.responseXml;
               alert(ajax.getResponseHeader("Set-Cookie"));
          break;
//////////////////////////////////// Call_WS() ////////////////////////////////////////
function Call_WS(){
var xmlhttp =null;
var browser = navigator.appName;
if(browser == "Microsoft Internet Explorer"){
xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");
}else{
xmlhttp = new XMLHttpRequest();
xmlhttp.open("POST", "https://secure-ausomxdsa.crmondemand.com/Services/Integration",true);
xmlhttp.onreadystatechange=function() {
if (xmlhttp.readyState==4) {
rteNode = xmlhttp.responseXML.getElementsByTagName("ListOfContact").item(0);
alert(rteNode.childNodes.length);
for(var i=0; i<rteNode.childNodes.length; i++){
switch( rteNode.childNodes.item(i).tagName ){
case 'Contact':
var ContactId = rteNode.childNodes.item(i).childNodes.item(0).tagName;
var ContactIdValue = rteNode.childNodes.item(i).childNodes.item(0).text;
var ContactIdGetValue = getInnerText(rteNode.childNodes.item(i).childNodes.item(0));
alert(ContactId+" : "+ContactIdValue +" / "+ContactIdGetValue);
break;
case 'Other':
break;
default:
break;
xmlhttp.setRequestHeader("SOAPAction", "\"document/urn:crmondemand/ws/contact/10/2004:ContactQueryPage\"")
xmlhttp.setRequestHeader("MessageType", "CALL")
xmlhttp.setRequestHeader("Content-Type", "text/xml")
//xmlhttp.setRequestHeader("Content-Type", "text/xml;charset=UTF-8")
//xmlhttp.setRequestHeader("Content-Type", "text/xml;charset=ISO-8859-1")
var miSoap=
'<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="urn:crmondemand/ws/contact/10/2004" xmlns:con="urn:/crmondemand/xml/contact"> \n' +
'<soapenv:Header/> \n' +
'<soapenv:Body> \n' +
'<ns:ContactWS_ContactQueryPage_Input> \n' +
'<ns:PageSize>10</ns:PageSize> \n' +
'<con:ListOfContact> \n' +
'<con:Contact> \n' +
'<con:ContactId></con:ContactId> \n' +
'</con:Contact> \n' +
'</con:ListOfContact> \n' +
'<ns:StartRowNum>0</ns:StartRowNum> \n' +
'</ns:ContactWS_ContactQueryPage_Input> \n' +
'</soapenv:Body> \n' +
'</soapenv:Envelope> \n' ;
alert(miSoap);
xmlhttp.send(miSoap);
//$(document).ready(function () {
alert("start");
$("table").each(function() {
alert("table");
var $table = $(this);
var str_id = $table.id;
alert(str_id);
</script>
<h1>Javascript WS</h1>
<input type="button" onclick="Login()" value="Login">
<input type="button" onclick="SSO_Login()" value="SSO_Login">
<input type="button" onclick="Call_WS()" value="Call_WS">
</body>
</html>
_____________________________________________ END OF FILE _____________________________________________
Best Regards,
Gerald

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

My application needs to access web server. So, from that application how do i call firefox ? and how do i pass an argument such as url/web server ip address?

My application needs to a access web server. So, from that application how do i call Firefox ? And how do i pass an argument such as the url/web server ip address?
== This happened ==
Not sure how often

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
[http://forums.mozillazine.org/viewforum.php?f=25]
You'll need to register and login to be able to post in that forum.

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Calling a Web Server with HTTP POST to retrieve XML in chunks

Hi,
I have to call a Web Server with the HTPP POST method by providing the user id and password. I am getting the xml as output from the web server in chunks. This is possible through net.HTTPUrlConnection Java Api. But does any body knows how to implement this through OSB.
Regards,
Anuj Maheshwari

sample usage:
CALL FUNCTION 'HTTP_POST'
    EXPORTING
      ABSOLUTE_URI                = IM_OFX_CONTROL_DATA-ADDRESS
      REQUEST_ENTITY_BODY_LENGTH = RESPONSE_ENTITY_BODY_LENGTH
      RFC_DESTINATION             = IM_OFX_CONTROL_DATA-HTTP_RFCDEST
      USER                        = IM_OFX_CONTROL_DATA-HTTP_USER
      PASSWORD                    = IM_OFX_CONTROL_DATA-HTTP_PASSWORD
      BLANKSTOCRLF                = 'X'
    IMPORTING
      STATUS_CODE                 = STATUS
      STATUS_TEXT                 = STATUS_TEXT
      RESPONSE_ENTITY_BODY_LENGTH = RLENGTH
    TABLES
      REQUEST_ENTITY_BODY         = LT_REQUEST
      RESPONSE_ENTITY_BODY        = RESPONSE
      RESPONSE_HEADERS            = LT_RESPONSE_HEADERS
      REQUEST_HEADERS             = LT_HTTP_HEADERS
   EXCEPTIONS
        OTHERS                      = 1.
Refer the programs:
LFPIFF02
LOFXALSU04
LPRGN_URL_RESPONSEU01
LSBCCU01
LSFTPU09
for some idea.
regards,
ravi

Logins being denied on 10.4.11 Server with unlimited clients.

I have a eMac running 10.4.11 Server with unlimited clients. This server is throwing people off the shares or denying them access, reporting that the number of shares has been exceeded despite it being an unlimited licence product. The licence information confirms that it is an unlimited licence. Restarting the server will remedy the problem for a while but is obviously impracticable. Can anyone please give me some help to remedy this problem?
Thanks, Rob

I am having a similar problem.
I just updated clients to Leopard.
Xserve is still running Tiger.
Now clients cannot search files on the server.
Apple support said Tiger clients used "cat search" instead of spotlight.
Now that clients are Leopard, clients try to search with spotlight,
but Tiger Server cannot search with spotlight.
He suggested looking for a 3rd party cat search for Leopard clients.
Any suggestions?

Anyone have a fully functioning thread server ? (any server with the client

Anyone have a fully functioning thread server ? (any server with the client source code) ? can u share it to me ? please ? I'm very hard to find a fully functinal example....
thx ........

Why not just write one yourself, it's not that hard. If you can't, then maybe you should learn how to write one before you try to use one.

How to debug web app with weblogic?

I wrote a web app that includes jsp files and some javabeans, then I put the jsp files to directory
mydomain\applications\DefaultWebApp
then I complied javabeans and put those classes to
mydomain\applications\DefaultWebApp\WEB-INF\classes
Then I start the weblogic,it runs very well.
I modified some javabean, complie them and put classes override the old classes,
but the web app can not find the new classes.
Any one know How to debug web app(with javabeans) in weblogic?
thanks!

how to config the hot deploy?
thxSorry, for this delay in responding. I had set notify me with email option in Watch This topic; but I never did get any email notification.
I use wls6.1; I think the process may be very similar to this in wls8.x. In wls6.1 (sp5), this is done via the -
Dweblogic.ProductionModeEnabled=False or
Dweblogic.ProductionModeEnabled=True
in the startup cmd/sh script. Out of the box, wls6.1 is set to Dweblogic.ProductionModeEnabled=False which automatically enables hot deploys.

I am using the "G Web Server" with Bridgeview 2.1. The problem I am having is that I have to

restart the web server once every 2 to 3 days, or the web pages don't show the vi (images). Any ideas to trouble shoot - I dont know if the problem is related to my workstation hardware or a setting that needs to be tweaked on the G Web Server. Thank you.I am using a Pentium 233 machine/ Win 95. The PLC I am collecting info from is a GE Fanuc Series 9030 (?). Ethernet connection.

restart the web server once every 2 to 3 days, or the web pages don't show the vi (images). Any ideas to trouble shoot - I dont know if the problem is related to my workstation hardware or a setting that needs to be tweaked on the G Web Server. Thank you.Hi,
we are using the G Web Server with LabVIEW on a WinNT 4 machine. Up to now these works fine. Therefore I would recommend you to choose a more stable OS.
Maybe you can try to programmatically restart the server every 2 days. Within LabVIEW you would do this by running "HTTP Server Control.vi". Unfortunatly all connections will be closed, thus be aware of that!
Hope that helps
chris

How to access web server with SSH client

Similar Messages

Maybe you are looking for