Maximum availability during partition move

I understand that the Assistant will be able to run on 9iR2 as well as 10g.
Will the Assistant then be using dbms_redefinition in order to have maximum availability during partition moves (plus any depending index builds and MV refreshes)?

Martin,
In its initial release we will be using standard partition maintenance commands to move data, however we will be looking at whether we can take advantage of DBMS_REDEFINITION.
Lilian

Similar Messages

  • Oracle databaguard maximum  maximum availability mode

    Hi All,
    My database is in maximum availability mode at 9.2.0.8:
    SQL> select protection_mode from v$database;
    PROTECTION_MODE
    MAXIMUM AVAILABILITY
    SQL> show parameter log_archive_dest_2
    NAME TYPE VALUE
    log_archive_dest_2 string SERVICE=XXX.world LGWR SYNC
    AFFIRM,
    SQL>
    Oracle Documentation says:
    Maximum availability mode provides the highest level of data protection that is possible without affecting the availability of the primary database. This protection mode is very similar to maximum protection where a transaction will not commit until the redo data needed to recover that transaction is written to both the local (online) redo log and to at least one remote standby redo log. Unlike maximum protection mode; however, the primary database will not shut down if a fault prevents it from writing its redo data to a remote standby redo log. Instead, the primary database will operate in maximum performance mode until the fault is corrected and all log gaps have been resolved. After all log gaps have been resolved, the primary database automatically resumes operating in maximum availability mode.
    and it also says.....
    The NET_TIMEOUT attribute of the LOG_ARCHIVE_DEST_n parameter specifies the number of seconds the log writer process on the primary system waits for status from the network server process before terminating the network connection. The NONET_TIMEOUT attribute reverses or undoes the timeout value that you previously specified with the NET_TIMEOUT attribute.
    If you do not specify the NET_TIMEOUT attribute (or if you specify the NONET_TIMEOUT attribute, the primary database can potentially stall. To avoid this situation, specify a small, nonzero value for the NET_TIMEOUT attribute so the primary database can continue operation after the user-specified timeout interval expires when waiting for status from the network server.
    If the log writer process detects a network disconnection, even one that was terminated due to a network timeout, the log writer process automatically tries to reconnect to the standby database. The log writer process does this to resolve network brownouts and false network terminations. In most cases, except when the network is physically broken, the log writer process is able to automatically reconnect to the network.
    The log writer process continually attempts to reconnect to the standby database for a period of time that depends on the data protection mode currently set for the primary database. Use the following time estimates as a guideline for how long the log writer process will try to reconnect to the standby database:
    In maximum protection mode, the log writer process tries to reconnect for approximately 5 minutes.
    In maximum availability mode, the log writer process tries to reconnect for approximately 2 minutes.
    In maximum performance mode, the log writer process tries to reconnect for approximately 30 seconds.
    question is:
    1>Does that mean if primary database is in maximum availability mode and if there is network issue and it cannot communicate with standby database, it will freeze or stall for 2 minutes and then operate in maximum performance mode.
    That freeze for 2 minutes in production is pain :(
    2>Does it also mean,
    In maximum performance mode primary database will freeze fro 30 seconds and then move on.
    3> To convert from maximum availability to maximum performance do I need to bounce the primary database at 9.2.0.8

    I guess I haven't asked the question correctly,
    I have asked 2 different question:
    1> do you need to mount your database to downgrade the protection mode, I needed confirmation for that at 9.2.0.8
    below is link which shows how to downgrade mode:
    http://www.idevelopment.info/data/Oracle/DBA_tips/Data_Guard_9i/DG_70.shtml
    2> question is all together seperate,
    staying in maximum availability mode what happens if you use 'LGWR ASYNC' or 'ARCH' for log shipping.
    Why I am asking this question is because, oracle recommends to use 'LGWR SYNC AFFiRM' for maximum availability mode.
    I have tried before 'LGWR ASYNC' or 'ARCH' in maximum availability mode and it worked.
    Has any one tried 'LGWR ASYNC' or 'ARCH' in maximum protection mode. does db freezes or stalls.
    3> When database stalls for 2 miuntes when it cannot connect to dataguard in maximum availability mode, I cannot see any trace files generated, nothing is written in alert log and nothing in listener.log

  • Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Or If there is any purchased music then you can try to transfer purchases
    http://support.apple.com/kb/ht1848
    If you're in the US you can reload purchased music
    http://support.apple.com/kb/ht2519

  • How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion?  Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

    I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7. 
    I would like to read and write in both directions from drive to drive if possible.  I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares. 
    I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:".  However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access. 
    Is the Paragon NTFS that comes with Mountain Lion limited in some way? 
    Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
    I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
    MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps.  I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
    My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
    Thank you for any guidance you can give me. 

    Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
    For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
    I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
    I would assme Paragon is limited. Try their site and knowledge base?
    MacDrive
    http://www.mediafour.com/updates/macdrive
    Paragon HFS
    http://www.paragon-software.com/home/hfs-windows/
    Paragon NTFS
    http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
    http://www.paragon-software.com/home/ntfs-mac/

  • Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

    Hi,
    I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
    available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
    Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
    I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
    The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
    We are unable to reproduce this issue in our Dev Envt.
    Could anyone of you please help me.
    Thanks in Advance!
    Regards,
    Venkat

    Hi Venkat,
    I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
    Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
    If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
    Does that help?
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • Maximum No. of Partitions in a Table?

    Hi,
    What is the Maximum no.of partitions in a table?
    Best Regards,
    Naresh Kumar C.

    All resides in what is 1K ?
    First option (more popular) : 1K=1024, so 1024K = 1024*1024
    Second option (less popular) : 1K = 1000, 1024K = 1024*1000
    http://en.wikipedia.org/wiki/Byte
    Have you really need to 1024K-1 partitions (either one or other option, it's already huge for number of partitions) ? Good luck for maintenance tasks...
    Nicolas.

  • HT1600 My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

    My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

    Welcome to the Apple Community Turbomedic.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Screen goes of during watching movie

    During watching movie the screen goes off (black) after x amount of time, just as when im doing nothing. This is terribly annoying when watching a movie,, what can i do about it??

    this is what i do for movies--
    click on the battery icon on the top right hand corner of the computer and go to "open energy saver". then create a custom battery setting so that the screen doesnt dim for x amount of hours or whatever. just use that custom setting when watching a movie.

  • How to make OBIEE reports available during the DB tables data refresh?

    Experts,
    We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
    Regards,
    Sarvan

    I would suggest this option:
    Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
    Data Source Name
    User ID
    Pwd
    when ever you want to change db just you need to edit these values that would help your bi with no downtime.
    You might have to tweak it little bit if needed.
    More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
    Try it out.
    BTW: 2.5 days load time for Full load or Incr?
    Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM

  • Customize delivery note during MIGO mov. type 541

    Hi, everyone.
    Pls. I need help because during MIGO mov. type 541, I need to print the delivery note just to accompany the materials.
    I can create/save the material doc. correctly, but when I save I have to customize the printout of delivery note.
    Thanks for tell me the step by step.
    Regards.

    Hi,
    Following are the general settings to take the printout of any materail document posted by MIGO:
    Go through these steps you can get the GRN Printout
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311,541 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

  • How can I hide non visible layers during test movie ?

    Flash CS5
    I have a layer I am using for construction purposes, it shows though in test movie. If I go to publish settings and untick include hidden layers on the flash tab, when I test movie, my cars don’t appear along the guide lines at all and just pop into view as movie ends.
    How does one hide turned off visibility layers during test movie without affecting hidden guide lines ?
    Envirographics

    If I have a layer that is only acting as a guide for laying things out or whatever, what I do is right click that layer's name and select "Guide" from the menu that appears.  It will not appear in when I use Test Movie

  • SAP LSO - Time integration; Error Participant not available during course

    Dear Gurus,
    I have requirement to enable employees to book the course irrespective of the Workshedule he is available in. Please let me know how to acheive it.
    Thanks and regards
    Saravanan K

    Hello Saravanan,
    You have mentioned participant not available during course
    the reason for this may be check any future action was done on the participant or check whether the participant is reserved/booked as a trainer on that day.
    Time integration will show impact on attendance only.
    thanks
    rafi

  • What are the differences in format options available for partition?

    what is the differences in format options available for partition?

    Select the drive in Disk Utility, click on the Erase or Partition tab, select the Format type: dropdown menu that will list your format options. For OS X the only option you should use is Mac OS Extended, Journaled. This is the standard format for OS X drives.
    Then there are options for Windows - MSDOS (standard FAT format) or ExFAT (an advanced FAT system with most of the characteristics of NTFS.) OS X can read and write with either filesystem. NTFS is only readable, not writeable, by OS X.

  • Resource availability during Non-Working Hours and Weekends

    Hi Gurus,
    Aim: Make the Resource available during Non-Working Hours and Weekends
    Requirement: CRP functionality enabling
    In CRC2 I have selected capacity tab and in capacity header under 'Change Interval and Shifts' button. I have Inserted a new Interval period and given the validity from/to dates(Non-Working day - Saturday) and Saved.
    When i execute the Capacity Planning CM01, there is no change. The Resource availability still shows as "0"hrs for this particular date and for rest of the days it shows as 8hrs.
    I have checked the same even after executing the MRP, No change in Capacity Planning Overview - Still the available Capacity Showas as 0
    Please guide me, how can i use my resource during the holidays. Means make the system understand that the defined day is a working day though it is holiday as per factory calendar
    Please correct me whether am i missing any settings or i should follow some other logic
    Regards,
    Tam

    Hi Partha,
    In workdays i dont have any such option "2"
    As per standard list I could see only 3 entries in the possible values(F4) popup
    "Blank" - Working days according to factory calendar
    "0" - Non-Working days(Overrides factory Calendar)
    "1" - orking days(Overrides factory Calendar)
    I have even tried with option "0" and "1" its still the same, when i enter the period From and To date the fields for the entries Shift start and end date, workday, Shift Seq, Length of the shift, No.of shifts.........are jumping to the next line item.
    Because of which i understand that the entered values is not corresponds to the newly defined period
    Pls guide me to how to make the resource available during non working days
    Regards,
    TamNen

  • HT204370 What do I do if the audio is off from the picture, during the movie that I downloaded from Itunes?

    What do I do if the audio is off from the picture, during the movie that I downloaded from Itune

    Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
    If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for