Maximum characters in line of notepad line

Hi,
I am reading and writing data on notepad file. Can anybody tell me maximum characters which can be written on single line of notepad file.
thanks in advance.

golden_moon wrote:
Sabre150 I have tested and up to 1024 characters supported on single line but I need confirmation.Why not test it up to 2^32 or greater? How do you expect to get an authoritative answer on a Sun forum about a Microsoft product? If someone here says "1,000,000 characters" then what makes you confident that they know what they are talking about?
P.S. Why are you only considering Notepad?
Edited by: sabre150 on Apr 16, 2008 11:30 AM

Similar Messages

Line size and line count

Hi all,
May i know about line size and line count impact on reports ?
i mean depending on line sizes values i.e 200 etc hw it will effect report either in output display or length ?
and also ablout line count too.
Thanks in advance.

This information may help you
*... LINE-SIZE width *
Effect
This addition specifies the line width of the basic list and details list of the program to width characters, and sets the system field sy-linsz to this value. The line width determines the number of characters in the line buffer as well as the number of columns in the list displayed. The value width must be a positive numeric literal. The maximum line width is 1,023 characters.
When the LINE-SIZE is not specified, the line width of the basic list is set to a standard width based on the window width of the current Dynpro, but is at least as wide as a standard size SAP window. For the standard width, the contents of sy-linsz is 0. The LINE-SIZE overwrites the value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-SIZE addition to the statement NEW-PAGE.
Note
The current maximum line width is stored in the constants slist_max_linesize of the type group SLIST. Also defined there is a type slist_max_listline of type c with length slist_max_linesize.
*... LINE-COUNT page_lines[(footer_lines)] *
Effect
This addition specifies the page length for the basic list of the program to page_lines lines and fills the system field sy-linct with this value. If the LINE-COUNT is not specifed, and if page_lines are less than or equal to 0 or greater than 60,000, then the page length is set internally to 60,000. This setting overwrites the passed value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-COUNT addition to the statement NEW-PAGE.
If you optionally specify a number for footer_lines, a corresponding number of lines are reserved for the page footer, which can be described in the event block END-OF-PAGE.
You must specify page_lines and footer_lines as numeric literals.
Notes
For screen lists, you should use the standard value since, as a rule, page breaks defaulted through LINE-COUNT are not adjusted to the window size.
You should also use the standard value for print lists, so that you can still select the page size on a printer-specific basis. A print list should be created in such a way so that it can handle every page size.
Specifying a fixed line count is only useful for form-type lists with a fixed page layout. Here, however, you should always check whether such forms can be created by other means, such as SAPScript forms.

Maximum Characters Input Box

What is the fattest letter? i.e. what should I use to test
that content always fits within an input box regardless of what the
user types? Is it the letter "M"? I know M is used as a standard in
other design circles.
Thanks

Thank you. Is there an easy way to do the opposite, have a
user's text adapt to the textfield? For example, I have an input
textField that is 100 pixels in width, single-line, size 20 _sans
font (Maximum Characters turned off for demo. purposes). You can
input 5 "M's" before the field begins scrolling right, or you can
enter 24 lowercase "l's". In this case the input is for a form that
will be printed, therefore scrolling cannot occur (since it wouldnt
show up on the print form), and Maximum characters must be turned
on. So I would have to limit maximum characters to 5 right? In
reality I'm working with much larger textfields, but you get the
idea. Is there a way to set the maximum characters based on user
input?

Reading lines beyon null lines in a file

While writing a file-processing script, I came across the following case where I need
to read info like ENDDOC and PGCount for multiple records that are in the same file.
; Record 1
@C ENDDOC# ATYC-12769314
@C PGCount 20
@T ATYC-12769295
; Record 2
@C ENDDOC# ATYC-12769317
@C PGCount 3
@T ATYC-12769315
Can you suggest how should I read the lines beyond null line in between?

There is no null line in there. There's only a line that consists of the empty string (assuming you are using readLine()).
Please not that those two variables will have different values:
String emptyString = "";
String nullString=null;readLine() will return the value of emptyString if it reads a line that hasn't got any characters on it and the value of nullString if it reaches the end of file.

Working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

Try http://www.microsoft.com/mac/support.

HOW can i rotate the loop as many lines of multi line container in BPM

Hi All
I have to send an idoc to 2 Receivers by spliting the message.
Based on the occurance of a particular source segments i need to create those many instance of targets.
IDOC ---> Rec1 (More than one message instance)
     ---> Rec2 (More than one message instance)
I have taken messages of Receiver into a multi line container1
and messages of Receiver 2 into another multi line container2.
HOW can i rotate the loop as many lines of multi line container.
Thans
Prasad

Hi Raj
There are two webservices are 2 receivers.
In the idoc there is specific segment , which occurs unbounded,Each occurence we Need to check the value of a particual field and send to corresponding Receiver.
For Ex:
ZE1KONH (1..Unbounded)
   >MSFGN =004 --> Rec1
>> MSFGN==0009 Rec2
It could be like , 1 or more segm for Rec1 and 1 or more segm for Rec2
                        all are for Rec1 or All are for Rec2.
so in the tranformation we need to put all message of Rec1 in corresponding multiline container as well for Rec2. Then i need to send to correspongind Receiver.
So here i need to send all splited messages to appropriate receivers

GL account with line items in line type 'S' document split?

Hi Experts,
We found in PCP0 there are payroll documents which has GL account with with line items in line type 'S' document split. Unlike other line items with line type 'blank' these line items cannot be opened and display the wage type details. How can we know from which wage type these line items were created?
Regards,
Allan

These line items are caused by company transfer and they are cleared by themselves between companies.

Adding a new schedule line for a line item using bapi_po_change

hi experts,
can i know how to add a new schedule line for a line item using<u> bapi_po_change</u>. what are the parameters that need to be filed. i filled poitem with total quantities and poschedule table with 2 different schedule lines and passing as the parameter.but then i get the error saying item 0000 doesnt exist

Hi,
Please check if you have properly populated the following fields in POSCHEDULE:
PO_ITEM
SCHED_LINE
and the other fields required for your schedule line such as delivery date and quantity, etc.
After that, make sure to properly populate fields in POSCHEDULEX:
PO_ITEM -> same value as found in POSCHEDULE
SCHED_LINE -> same value as found in POSCHEDULE
All other values populated in POSCHEDULE should be ticked as 'X' in POSCHEDULEX.
Kind Regards,
Darwin
Kind Regards,
Darwin

Export Excel Data only causes blank line between 2 lines of records

Hi,
I wrote a complete winform application using CR2008.
For information :
C# Framework 3.5
Windows XP SP2 or Windows Server 2003 SP1
CR2008 SP1
Application allow to preview report. In the preview window (CR activx) there is a "letter icon" to export report in several format.
-RPT
-PDF
-DOC
-XSL
-XSL Data only
When I export with "Excel Data only" format, I always have a blank line between 2 lines of records in Excel.
Is there a way to supress them from VS2008 ?
Thanks a lot for your reply,

Hello, Jonik;
Do you see the same blank lines when you export to Excel Data only in the Crystal Reports designer?
Elaine

BI Publisher 11g. Plotting multiple lines in a line graph

Hi,
We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem.
I have 3 mterics: Month (which will be X-axis) , Size (Which will be on y-axis) and Name. I have names for 10 tables and i want to display 10 lines in my line graph.
In the chart generator, I am using Month in "Labels", Table name for "color" field" and size in the "values" section.
When I am trying this I am geting the following error in chart generator. It says " The data required 2 columns. The data has only 1 column." To trick the system, I also put a dummy column with static value of 1, but then also i am getting the same error, that it requires 2 columns.
the sample XML for the chart is like this:
<G_2>
<TABLE_SIZE_TRENDS>43.90832000000001</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table1</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
- <G_2>
<TABLE_SIZE_TRENDS>69.62872</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table2</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
It looks pretty straightforward but I am stuck in it for quite some time now.
All your guidance is greatly appreciated in this regard.
Regards,
Aakarsh

any help? still need help. thanks

Line style of Word tables is ignored. Broken lines or dotted lines appear as uninterrupted lines

Bug in Adobe XI:
The line style of Word tables is ignored. Broken lines or dotted lines in Word tables are shown as normal uninterrupted lines in PDF file.
For example, in my Word document I choose the following line styles in tables: dotted line (.........................) or broken line ( - - - - - - - - - - - - ).
In the PDF file, all lines are shown as normal uninterrupted lines (__________________), even if I zoom in 800% or more.
Is there a solution for this problem? (In FreePDF, it works well, but FreePDF has other disadvantages and therfore is no solution for me.)

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Read a specific line of a txt file using vba not using line by line, Leer una Linea especifica de archivo de texto sin recorrer linea por linea

Buenos días - Good morning
Mi pregunta la escribiré en español y en ingles y espero alguien tenga la solución.
I'll write my question in Spanish and English and I hope someone has the solution.
SPANISH
Creé una Macro en VBA que lee mas de 200.000 archivos de texto (.txt) los cuales tienen diferentes tamaños y cantidad de información dentro de ellos, de cada archivo necesito extraer la información de las 3 primeras lineas y las ultimas 10 lineas, las 3
primeras lineas es fácil ya que uso un "READLINE" 3 veces y voy capturando la información de las tres primeras lineas, para las ultimas 10 lineas las cuales están identificadas por un código inicial hago un ciclo que lee linea por linea hasta que
encuentra el numero 3 en un espacio especificado de la linea y de ahí captura la información de cada linea de texto que serian las 10 ultimas, el problema que tengo es que la cantidad de archivos y de información dentro de los archivos aumenta considerablemente
cada día y por tener el ciclo que lee cada una de las lineas de cada archivo de texto la Macro se demora cada vez mas a medida que aumenta la información y consume cada vez mas memoria de la maquina.
Necesito un método diferente que no lea linea por linea y que yo le pueda decir lea la linea (renglón) numero 1000 (ejemplo) y capture la información a partir de ahí para ahorrar algo de tiempo, o saber cuantas lineas de texto tiene el archivo .txt y decirle
que me lea a partir de (numero total de lineas del txt -(menos) 10 lineas) así me leería las 10 ultimas.
ENGLISH
I created a Macro in VBA that reads more than 200,000 text files (.txt) which have different sizes and quantity of information within them, each file need to extract the information from the first 3 lines and last 10 lines, 3 first lines is easy as using a
'READLINE "3 times and am capturing information from the first three lines, for the last 10 lines which are identified by an initial code I make a loop that reads line by line until it finds the number 3 in a specified area of the line and then capture
the information of each line of text that would be 10 last, the problem that I have is that the number of files and information within files significantly increases every day and having the loop that reads each line of each text file is delayed Macro increasingly
as more information and consume more and more memory on the machine.
I Need a different method not read line by line and I can tell you read the line (row) number 1000 (example) and capture the information from there to save some time or know how many lines of text have the file .txt and tell me read from (total number of lines
of txt - (minus) 10 lines) so I would read 10 last.
Here is the code I currently use
Dejo el código que uso actualmente
Dim fs, f, ts, REG
Set fso = CreateObject("Scripting.FileSystemObject")
On Error Resume Next
sFilePath = strFolder & "\" & strFileName
Set f = fso.getFile(sFilePath)
Set ts = f.OpenAsTextStream(1, 0)
REG = ts.READLINE
Ciclo para llegar hasta las ultimas 10 lineas
Cycle to reach the last 10 lines
For J = 1 To 200000
REG = ts.READLINE
If Val(Mid(REG, 6, 1)) = 3 Then

Good Morning ryguy72
First thank you so much for your answer, sorry for my english in the question, I tried for a long time to make a code that wasn't so slow to read the last 10 lines, 'cuz most codes used a cycle "For" to read line by line asking if in the specific
position is the character(number) that tells me that i should get started to read the last lines that i need, that takes a lot longer than your code doing a Split with Mydata and storing it in strData(). I don't know how to do this and every forum that
i consulted to read the last 10 lines quickly they made the same read line by line with a Cycle "for".
Thanks again, I gonna improve my code with your help, 'cuz it took about 4 hours to read all the information and everyday ascended more time and memory consumption.
Thanks to everyone who offered their help so disinterested and free, so should always be people with that spirit, I hope someday to be SO good as you programming.

HT4641 after modifying a document in Pages I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

PO line Cancelled but line Items Showing in Shipments

I have cancelled this PO line Cancelled but line Items Showing in Shipments. Still this PO is open for this Line. How to fix this?

Hi,
Report RKANBU01 resets commitments on orders and ranges of orders.
(please see the note 152571).
Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
(See Notes 100409 & 152571).
Report RKACOR04 corrects mistakes between total and line items in database tables.
(See notes 21649 & 152571).
regards
Waman

Maximum characters in line of notepad line

Similar Messages

Maybe you are looking for