Maxiumum size of data a MI client can hold

Hai,
Can anybody tell me what is the maximum size of data a MI client can hold, if we are using a file system as its persistence layer.
thanks in advance,
Sreekanth.S

MI doesn't limit the volume of the data being persisted. Of course, there are practical limits:
1. The storage memory itself is not endless. On PocketPC (PDA) you should keep an eye on the free memory.
2. Before persisting, the data is being downloaded (or?!). So, you are limited by the synchronization times, connection speed etc.
So, there's no theoretic limit for persisting a movie (for example), but it's not practical.
Cheers,
Todor

Similar Messages

What's the maximum size of data a coherence cluster can hold?

What's the maximum size of data a coherence cluster can hold before it starts noticing a degradation in performance?
Assume a partitioned topology is used with only one backup for each partition.

Hi,
Coherence partitioned cache is designed for linear scalability and it does it quite well. I don't see any reasons of performance degrations with increase in data size given, you have enough cores and memory for processing the requests and managing the data.
Cheers,
_NJ

How many characters length an ODI variable can hold

Hi,
I just want to know how much data length an variable can hold, I have a string of 4000 characters. Can variable can hold the output of this much length.
Thanks

No, its 250 characters in 11g

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

Can file size validation be done in client for af:inputfile

if you upload a big file with size bigger than the 'org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE' in web.xml, then it will take a long time to process. finally, a error message is shown in the page, saying "the file is too large". the whole page seems hang during the uploading process.
can this size validation be done in client site before uploading?

Actually our QA had fire a bug for this issue,:
they set proxy and not check the bypass option , then when they upload a 100M size file ,the browser will hung there during the uploading process
and they do believe this is ADF's bug ,no matter how we explain
so we had do some research try to fixed it by ourselves , then here is a workaround may be work ,we have not implemented just have this thinking :
In IE browser we can use the ActiveX to implementation
In FF and Google Chrome we can use the W3C's new API to get the file size:
<input type='file' id='fileinput'>
<script>
var input = document.getElementById('fileinput');
var file = input.files[0];
var fireName = file.name
var fireSize = file.size;
</script>
But I also found in some documents pointed that the Struts and Sprint framework can check the upload file size before the file uploaded , but I do not know how can they do that.
If other framework can do that why ADF can not, then we need to resolve this issue by ourselves?
Edited by: user13152002 on Sep 1, 2011 11:29 PM

Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!

Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!???

Hope this helps:
http://ios.wonderhowto.com/how-to/fixing-ios-7-wallpaper-woes-scale-crop-align-d esign-perfect-iphone-background-0148750/
Please reply with any further questions.

Wat is the maximu size of data XI can handle

HI,
I would like to know wat file size XI system can handle at one time. What size of data can XI handle.
Please reply me as soon as possible.
Thanks in advance.
Chirag

Gohil,
This all depends upon your hardware and sizing the XI box. Also it depends on how complex your mapping and whether you are using any BPM inside the scenario or not. I have come across where XI is used just to move the file of 1GB also.
If your file adapter or XI is going down with this file then I would suggest to read chunks of data into XI and process further.
Regards,
---Satish

MAXIMUM SIZE OF DATA THAT CAN BE HANDELLED BY SOAP ADAPTER

hi 2 all,
Soap adapter is calling webservice through bpm.So i but its taking time to call the webservice.So i wanted to know,what is the maximum size of data that can be handelled by the adapter.

There is no maximum size. It depends on your h/w configuration and also the consuming applications response times as well.
Ideally a payload size of 5 - 10 MB provides the best performance.
Regards
Bhavesh
PS: Please do not use Captials on the Internet.

Can I export 8i data using 10g client to import it into 10g

Dear All,
I have 8i databae and want to import few of its data in 10g.
Can I do it and how?
I tried to export using 10g client but not worked.
Aqeel Nawaz

Hello,
You should export the data of the 8i database using the *8i* export utility.
Then, you import the generated dump to the 10g database with the *10g* import utility.
Else, you may care of the character set so as to avoid conversion.
Sorry Azar, I didn't see that you answered already.
Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jan 30, 2010 9:19 AM

Scale:how many client can register with jms

hi all, i want to test the scaleof jms , in other mean i want to send msg using jms to 25 client/publisher running at the same time to calculate the time any onw can helpme how to do that test.i think it is not resonable to run the oub 25 timer i think there is another way.
regards
nagwa

Depends on how often they hit "reload".
If you have an on-line chat forum, people tend to hit reload every N seconds to see if there are new posts. 1 user = 200 hits/day. If your site show TV listings, people load your page only a couple of times a day because it doesn't change constantly. 1 user = 2 hits/day.
Estimate how many hits an average user does to each page. Then measure the speeds of your servlets. Estimate how often each servlet will be accessed -- or if your site is already on-line, get that info from logs. Simulate your expected web traffic.
If you use sessions and put lots of data in them, estimate the size of data you keep per user. That'll give you memory requirements.

How do I put text into an Edge File that clients can edit easily afterwards

Hi
Can anyone explain how I can put text into an edge file (styled with google fonts) and make it so that clients can access the text and update the text as they require?
Previous suggestion was dynamically loading a .txt file - any instructions would be most appreciated.
Thanks.

Hi Resdesign!
Your code is very useful to learn how to use Json in Adobe Edge Animate!
But I have a question: why you use ( i ) as argument of the function UpdateInfo and when you recall it you use ( index )?
$.getJSON('slides.json', function(data){
          //for(var i=0; i<data.length; i++){
function updateInfo(i){
                    sym.$("photo").css({"background-image": "url('"+data[i].image+"')"});
                    sym.$("pillar").html(data[i].pillar);
                    sym.$("what").html(data[i].what);
                    // position
          index = -1;
          sym.$("btn").click(function(){
          index++;
                    if (index>=5){
                              index = 0;
          updateInfo(index);
Many thanks for your attention!
Davide

Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.

I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

How to extract the size and date from a given file

Hi,
I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.

Have a look at java.io.File, specifically
public long lastModified()
This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
Cheers,
Radish21

How to transfer data from one client to another client

Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay Kumar

Hi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

Maxiumum size of data a MI client can hold

Similar Messages

Maybe you are looking for