May I install a stand-alone Adapter engine for MI?

I wonder if I can install a stand-alone Adapter engine (i.e. JAVA SE)  for MI?
Points guaranteed. Thanks!

Hi,
no, that is not the usual way of handling data with MI.
Well, MI exchanges data with the Middleware and the backend via SyncBO or Generic Sync. SyncBO is a data container that does the complete delta handling for example. The connection will be: XI receive data from an external system and stores that data in R/3. Then the SyncBO retrieves this data via GETLIST and GETDETAIL handlers and then the data comes down to the device with the next sync.
BUT: the thing above is extremely drilled down - because of that it is only seen as a general answer. To discuss it more in depth, feel free to get in touch with me. The question I have in mind is till: what do you want to do with the XI connection.
Regards,
Oliver

Similar Messages

  • Why when I install a stand alone trial version of Photoshop CS6 I get extended installation?

    Why when I install a stand alone trial version of Photoshop CS6 I get extended installation? I want only CS6.

    Hi Ilya Nazarenko,
    We would like to inform you that the installer for both Standard and extended version are same, as trial you get Extended version.
    If you have serial number for Photoshop Standard CS6, only then it would turn out to be standard version.
    Download CS6 products
    Thsnks,
    Atul Saini

  • Looking for a stand alone belt clip for new ipod

    I am trying to find out if anyone knows where I can get a stand alone belt clip for my 5gen 60GB ipod. I purchased the invisibleSHIELD
    and just need a belt clip that does not include a whole ipod cover. Thanks in advance.

    I went to the apple store and tested the 20GB ipod clip on the display 60 video ipod and it didn't seem to lock in tight. The ipod seemed a little to big for clip holder. Luckly the store had a returned 40gb ipod clip and it fit perfectly and best of all I picked it up for less than 10 bucks..

  • Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    Just purchased Lightroom (stand alone) and asks for a previous serial number. I don't have one only an students version of photoshop for which I can't find the serial number

    If it is asking for a serial number for a previous version then you purchased an upgrade version rather than a standalone version.  You should be able to determine this based on the price you paid.  If you do not own an earlier version then you need to purchase a full version rather than an upgrade.  If you did purchase a full version but acquired an upgrade version then you will need to acquire the full version.
    Contact Adobe support thru chat to help get resolution...
    Get help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Can I install Photoshop stand alone upgrade and Creative Suite on same machine?

    I'd like to be able to install my Photoshop CS6 Upgrade on the same machine as I am running Creative Suite 5.5.
    I'm using Windows 7 64bit.
    I have one running on a laptop and one on my main machine.. is this possible without conflicts?

    Hi Ned
    Thanks for the reply.
    I have CS5 Photoshop stand alone but it's not installed on same machine as Creative Suite 5.5.. its on a laptop. I use Photoshop mainly but don't want to stuff up my Creative Suite by installing CS6 as well..

  • Installing Java Stand alone Application on other PCs

    Dear All
    I am very new user to Java programming. I have recently finished developing basic Java Application that interacts with MySQL Database. The application does pretty standard database tranctions.
    Now i would like to install this finished appliction on other PCs as stand alone program (hope i am making myself clear here). Sort of I need to make an installation package that will install the Basic application and MySQL database on the the other PCS.
    Please desparetly help needed on this matter. I appreciate all your inputs Thank you.

    it would be much much easier if you weren't using MySQL to be honest. if you used a pure-java database such as Hypersonic, the database could just be bun dled as a bean with your application.

  • PI 7.0: Message prioritisation in adapter engine for SOAP adapter.

    Hi All,
    We have both high and low priority synchronous messages using the SOAP sender Channel of the Central AE.
    How can we make sure that High Prio messages ALWAYS get a thread right away when entering the AE? Installing a separate AE is not an option.
    When I look in RWB->Component Monitoring->Adapter Engine->Engine Status in the Queues tab, I see this:
    SOAP_http://sap.com/xi/XI/SystemCall Yes 5(5) 5
    SOAP_http://sap.com/xi/XI/SystemRqst Yes 5(5) 5
    When a new High Prio message enters, it can take more than one hour before it gets processed, because there are 1000 Low Prio messages also using the same 5 available Threads...
    This delay is of course unacceptable for High Prio messages.
    I checked in many other threads in SDN, looks like we cannot priortise for particular messages in PI 7.0, as we can do only at adapter level, not at interface level.
    I was thinking of going to the approach which was suggested by "Gr, Wout" in the below thread. 
    xi prioritization in adapter engine (ae, af, adapter framework, java, jca)
    Creating own adapter "MYSOAP" by copying the metadata of SOAP adapter. By that we can use our own adapter "MYSOAP" for high priority interfaces.
    what you think guys about this approach?
    Is there any thing I need to take care going through this approach apart from copying SOAP metadata into my own adapter.?
    Thanks
    Deepthi

    increased thread count for soap adapter

  • Stand Alone Crystal Reports for Visual Studio 2010

    I wish to use the stand alone product to edit Crystal Report .rpt files created with Visual Studio 2010
    Is CR 2011 stand alone.product the right tool?
    Using CR 2008, I receive a warning message if I open a .rpt created al VS 2010.
    Likewise, if I import the edited .rpt file to VS, another message pop ups saying that it will be updated to a newer version.
    Thank you in advance
    Edited by: Roberto Mirelman on Oct 21, 2011 2:59 PM

    You are correct.
    CR 2011 reports can be run in CR for VS 2010.
    Technically you can still use CR 2008 to edit your reports and shouldnt see any problems other than getting the prompt all the time.  I am not sure if using CR 2011 will cause prompting as well so you may want to try it our using the trial version first.
    Jason

  • Stand alone CSS editor for WDA

    im at a client who doesnt have a portal.
    So there is no access to the portal  theme editor.
    When using WDA direct to a NW 7.11 , the customer would like to brand the output.
    A few years back I recall some stand alone theme editor.
    Eclipse add on ?   May have been an SAP only internal tool. ?
    Is there a customer available version ?
    How best to go about CSS editing for WDA ?
    regards
    Phil

    Did you first search SDN before posting your thread?  This is a very common question and yes there is a standalone theme editor. In fact one of the sticky threads in the forum discusses it.
    NWDS Theme Editor - Enhancement proposals
    You can download the Theme Editor and the How To Guide from this page on SDN:
    http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/b08a05ec-e24a-2d10-189e-f5c6bcbf39a5

  • Oracle PM stand alone against installables for WebSphere

    Hello,
    I am new to BPEL and would like to know, where the main advantages for integrating the process manager in WebSphere are. I would appreciate if somebody could give me some keywords.
    I used the stand alone for some tests and would like to use the installables for WebSphere.
    I tried the only manual I found for oracle, but the build.xml didn't work correctly. The jacl scripts where not executed because the wsadmin.bat was not executed.
    Did someone install the installables for WebSphere and could give me some hints to get this working. The configuration was ok and I use the Rational Application Developer with WebSphere 6.0.2.
    Thank you very much!
    Sven

    Make sure that the BPEL server configuration in the designer is not defined. That is, all the fields are blank.
    You can set that in Eclipse Window -> Preference -> BPEL

  • Message split on adapter engine for the java based IDoc adapter

    Hi Guys,
    Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
    I'm getting such exception when I try to post 3 IDocs
    Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
    state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
    sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
    ^
    Mapping is one to many.
    Each IDoc content has been compared manually against the xsd schema and it was fine.  
    I know that old way of modifying xsd is still possible.
    Best regards,
    Wojciech

    Did you find a solution to this? Having a similar error right now.
    Thanks and kind regards
    Jens

  • Adapter Engine for XI

    Hi, we are using XI 3.0 and try to test services /sap/bc/bsp/sap/spi_monitor and getting some error messages, i am sure in sxmb_adm logging_sync parameter is set to 1, when I goto RWB and select "Component Monitoring" Adapter Engine is yellow
    I am sending screen shot with it
    http://www.flickr.com/photos/25222280@N03/2384651871/

    Hi all
    We are using XI30 SAP640 SP20 and trying to create Alerts to eamil setup
    SAPconnect is working fine... all eamil works fine... in SAP system
    System Name XDV
    Follow this documents pdf file URL blow:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
    I am sending some paragraph arcording my probelm; someting I didn't understand please help me out
    If you open above URL and check page number I having problem
    QUESTION NO.1 Page No. 4.
    3.1.1 Runtime Workbench Configuration
    ICF Services
    /sap/bc/bsp/sap/spi_monitor for example this services
    all services are actived but when I right click any of them getting an error messages ?
    Will it efect somewhere ?
    QUESTION NO.2 Page No. 6
    System Group Entry
    When I check System Group Entry in RZ21 It does show XDV which is our XI system name with "YES" but
    under Group name is "System 640" not as a documents said ExchangeInfrastructure_System
    is that ok ?
    QUESTION NO.3 Page No. 8
    Set Up the Central Alert Server
    In doc. said RFC dest alert server: None
    In my system define our XI system host name forexample: xdbcixdv
    sould I have to put none or is ok?
    QUESTION NO. 3 Page No. 9
    3.ICF Services: Activate the following services in SICF
    some services are not listed in ICF such as
    /sap/bc/bsp/sap/alertinbox
    /sap/bc/bsp/sap/alertsubscription
    /sap/bc/bsp/sap/alertpersonalize
    /sap/bc/bsp/sap/alertpersonalize_rules
    When I tried to create its not take longer 15 char. I eamil to SAP they said its ok but services
    are running in background... i am not sure they are answer...? what do you thing?
    QUESTION NO.4 Page No. 9 (same page)
    4. Schedule Alert Processing
    I didn't define schedule, sould I have to do that ? if yes, what sould I do that
    and what kind of Variant report name should I select ?
    QUESTION NO.5 Page No. 10
    6. Schedule Report
    What kind of Report does it said and why we need to do that ?
    QUESTINO NO.6 Page No. 10
    3.2 End-to-End Monitoring
    its show PMI what is that for ? what does it do for alert
    QUESTINO NO.7 Page No. 13
    3. Schedule Alert Report
    I didn't define background job, I will do that so what varlant should I select ?
    QUESTION NO.8 Page No.14
    4. Create System Group
    When I tried to create its never create like Group its does show only sub-group
    why ? I want its show same as picture like yellow folder or group
    Exchangeinfrastructure_System
    as I maintion above its show my XDV system under group System640 with monitoring active YES
    is that ok ?
    QUESTION NO.9 Page No. 15
    6. Exchange Infrastructure Monitor
    When I goto RZ20 and select SAP CCMS Monitor Template, its show Exchange Infrastructure
    When I select it just show gray color look like disabled why is that that why its does not
    shows like picture shows ?
    QUESTINO NO.10 Page No. 16
    1. Create GRMG Customizing File
    Goto sap notes and download file in my computer change name like xdv_sld.txt
    change scenario only system landscape directory for testing purpose
    goto GRMG and updated that file and start it
    its show GREEN check mark which is running fine no errors
    Remember I just only change system landscape directory and create RFC connection
    with test connection no errors...:), i will be create some more RFC connecitno first
    I have to makesure its will works fine... or not ?
    question is that will I have to create all others at this time or 1 is ok ?
    QUESTINO NO.11 Page No. 18
    2. Use Standard XI Monitor as Basis
    can you please tell me what monitor should I select ? from the list ?
    QUESTION NO.12 Page No. 19
    1. Create an Alert Category
    What kind of Alert category will I create, I treid ALRTCATDEF and copy some other category was there
    like XDV_ALRT thats it ?
    can you please tell me what alert category sould I select or where should I go?
    QUESTINO NO.13 Page No. 21
    5. Define Recipients
    I would like to define some user like basis and other users sould I have to define there ?
    and what about next picture "SAP_XI_MONITOR" should I have to define that roules alwyas?
    QUESTINO NO.14 Page No. 22
    7. Alert Inbox
    When I goto Alertinbox does't show any messages at all; ? what i am missing
    QUESTINO NO.15 Page No. 24
    1. Create Alert Category for CCMS
    I didn't understand from page no 24 to till end why we are create again some alert for CCMS
    why we need that?
    Please can you tell me thease answse or any create dummy alert for testing, will be very
    help for me
    Thanks a lot in Advance
    Travis

  • Is there a stand alone virus checker for MAC?

    Is there a Virus checker program that can run via a DVD or external to the hard drive? I would like to do a scan for any virus on the HD but do not want a resident one due to impeding speed of daily operation. The other alternative could  be a check from within OS Lion utilities if there is something there?
    As a rule, I do not open any unidentified attachment unless it's a friend and the file is not of a Macro nature.
    Any suggestions would be appreciated.
    Len

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • Re-install of stand-alone Acrobat 7.0 failed in Activation

    I have a valid license for Acrobat 7.0.  When re-installing 7.0 on my new 32-bit machine, it seems like in 2013, Adobe makes it hard or impossible.
    My own License no. doesn't work, so the main Adobe site allows you to download with a standard License no. for Acrobat Standard 7.0 ending in xxxx-2468.
    The Activiation Information "Next" tab remains grayed out, and I was stuck.
    Need some help from Adobe Tech support to unlock this, as it isn't fair I think.  My 30 minute chat with the Adobe support basically said to post this question on the forum.
    Hopefully Tech Support will reply soon . . .

    The Activation server was taken down for CS2 products by Adobe so Acrobat 7 won't activate.  There is a workaround provide by Adobe though.
    Go here:  http://www.adobe.com/downloads/cs2_downloads/index.html
    Download Acrobat 7 - Non-Activation version
    Use the serial number that is listed on the web page.

  • Publishing EXE stand alone auto run for CD

    Sent .EXE presentation to client. These were imported
    powerpoint slides. However, client could only see first slide and
    her machinge froze. Also it would reboot the machine sometimes. I
    tested the CDs that I made and they only worked on PCs that had
    Powerpoint installed. If I imported from Powerpoint why then do
    people need that application to view the presentation? Is there
    some way that I can get around this before I create another
    shipment? Some field reps have no powerpoint to show the Captivate
    movie.

    Hello cc_booker,
    Microsoft PowerPoint does not need to be installed to view
    the .exe. The only requirements (as far as I am aware) for the .exe
    to function correctly is to running Windows 95 or later and to have
    one of the newer Flash Player plugins installed for Internet
    Explorer. You can have your field reps download the Flash Player at
    http://www.adobe.com/go/getflashplayer.

Maybe you are looking for