MB21 transaction- Calling screen for inputs by customer

Hello Experts,
When we go to MB21 t-code for creation of reservation, we have to input "Movement Type" and "Plant". Once we input the same & press enter to continue, we want to call a screen which should facilitate the customer to input some entries & proceed further.
Hence required to use some enhancements/user-exits/BADIs...Can some one suggest, which is the best suitable functionality for the above requirement OR is there any standard user-exit available???
Regards
Mahesh

yes

Similar Messages

FB02 - Field KIDNO not on screen for credit doc (customer) / debit (vendor)

Hello,
I am trying to manually change field BDEG-KIDNO on transaction FB02.
I used custumization to make this field changeble when:
. Line item not cleared
. No invoice-related credit memo
I do not have the "Customer Debit or Vendor Credit" checked since I intended to change both debit and credit documents for customers and vendors.
When I used transaction FB02 to change this field I have no problems with debit documents on customers and credit documents on vendors but I cannot change it since the field BSEG-KIDNO does not appear on screen.
Is there any customization for whether field BSEG-KIDNO appears on screen for credit documents for customers and debit documents for vendors?
Any help will be appreciated.
Thank you
Elisabete

Hello,
The field I want to change is BSEG_KIDNO not BKPF-XBLNR.
This field (payment reference) appears on the line item if customer debit document and vendor credit document but not if customer credit document and vendor debit document.
Thanks,
Elisabete

How do i bypass the emergancy calls screen for iphone 3g

my phone is stuck on the emergancy calls screen and id like to know how to bypass that?

Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

Custom Screen for Search Help

HI,
I have designed the Search Help in SE11.
Its working fine.
When executed, it pops up the screen for input search criteria.
My question is : is it possible to have this popup screen as our own customised screen.
Can we add some Heading and Subheadings to it?
If yes, please let me know how can we do this.
Thanks in advance.

HI,
I have designed the Search Help in SE11.
Its working fine.
When executed, it pops up the screen for input search criteria.
My question is : is it possible to have this popup screen as our own customised screen.
Can we add some Heading and Subheadings to it?
If yes, please let me know how can we do this.
Thanks in advance.

How to add screen for IEQM0003

Hi All,
I am working for T code IE02 in PM module.
I have requirement that when user saves the Equipment, a Pop-Up screen should come.
This will contain 2 Radio-buttons and one Ok button.
After Selection any Radio Button and Pressing OK, a Workflow will be triggered.
Please give me step by step procedure to do above.
There is User Exit Enhancement IEQM0003. Pls tell me how to add screen to it.
Raja

Rishi
1. Create custom screen in function group XEQM... which is the same function group for the Exit EXIT_SAPMIEQ0_001.
2. Do call screen to view that custom screen in user exit EXIT_SAPMIEQ0_001.
3. Trigger the workflow event as per your requirement. For this write the code in PAI of Custom Screen.
Thanks
Amol Lohade

POPUP_TO_CONFIRM & CALL SCREEN in TRIP t-code of ECC 6.0 and ESS Portal

Hi All,
We are moving from 4.6c to ECC 6.0. In 4.6c, we use POPUP_TO_CONFIRM FM and CALL SCREEN command in a custom FM to raise a confirmation screen in the standard T&E Trip Transaction ( T-code TRIP) from Portal.
From Portal, in ESS screen, when a button is pressed we call this custom FM. This custom FM uses POPUP_TO_CONFIRM and CALL SCREEN. This works fine in 4.6c
Whereas, in ECC 6.0 it gives dump when these statements are encountered.
Question:
Does anyone know what is the solution or any alternative to these commands in ECC 6.0?
FYI - This question was earlier posted in ABAP Dynpro but no response.
Thanks,
SKJ

What is the error message you are getting?
The TRIP code may have been re-written to make more use of ABAP Objects which may place some constraints on what you can do, or it may be a unicode related issue.
Post more details of the user exit you are using to call your FM and the resulting error to see if more assistance is possible.
Andrew

Issue on mb21 transaction

Hi sap fans,
I got one issue on mb21 ( material reservation) my client saying that while doing purchase order for every material backend one
reservation number generates automatically this reservation number automatically updates to eket, rseb table
but here my client doing reservation for same purchase order materials using
mb21 transaction in there for all materials only one reservation number will generate.
so did bdc like this fethched ekko,ekpo ,eket ,resb using given ebeln number then passed these matirials to mb21 recorded transaction but the drawback is ebeln,and ebelp fields are not available to store these values in mb21 transaction
so my client gave men another modification is if he change purchase order quantity we have compare the difference of quantity using porder material with mb21 generated reservation then do reservation for that difference quantity only else modify that quantity using mb21 transaction
mb21 generated reservation number we cant get ebeln and ebelp values so how to resolve this issue
Regards
Udaya Bhasker Bandi

hi This is issue is aswered

How to create transaction or screen variant for custom tcode in module pool

Hi,
I have one module pool program with custome tcode ,i want to create transaction or screen variant for this tcode.Next time when we run this tcode we need a variant for this tcode.
I tried by using of SHD0 but it is working only for standred tcodes.Is there any possibilty please help me.
thanks,
Lavanya.

Hi,
you created a Custom Tcode for ur module pool Pgm..if u execute the Tcode in the output screen give the input details and press Save Option then variant will be created. Then you can use that variant.
otherwise.. while creating a Tcode..
select an option for Tcode type Tranasction With variant ..there u will provide the variant for ur Tcode ( which is already created ).
Regards,
PraVeen.

Custom transaction link in EP screen for buyer

Hi all,
We are on SRM 5.0 Sp12.
Our users use EP as the fornt end.Now we have a custom transction for a custom report created in SRM and would have the link to it in EP screens for PUCRAHSER role.Can snybody suggest if this is possible?If so,how??
I knw its possible to put the custom link if we log in thorugh the BBPSTART url in IE.But i need to know what are the options if we need to have this link in EP?
Thanks.

Hi jay,
Can you please exaplin the steps to create an iview and embed them in a SRM role.

Calling screen from another transaction

Hi,
If I want to call screen from other standard or custom transaction into my custom transaction, how do I do it?
Thanks.
Tushar.

Hello See this link ,
http://www.sapgenie.com/abap/bdc.htm
This contains the program which calls the transaction using BDC.
Hopping this will help for you

Encapsulated transaction call from a (sub) screen

Hi all,
i want to built a customer transaction what calls an amodal window movable over the calling session and i want to display a standard transaction in the underlying original session, e.g. FB03.
My problem is, that when i have opened the amodal window and i call FB03 afterwards, the amodal window is closed. If i leave FB03 i run trough the PBO of my calling screen and i reopen the amodal window again.
So: Is there any chance, to encapsulate the called transaction, so that it is displayed in my calling window without terminating the transaction what has called it? From a subscreen? From a container?
I remember that similar standard functionality may exist in workflows, but i am not sure.
Thanks in advance for any hints.
Axel

HI,
It is not possible to call a sub screen from a sub screen.
Rgds
Umakanth

Search help for input fields in a screen

Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.

Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar

Custom UI or editor for input-parameter

I think I need to implement a custom UI editor for an input-paramenter. My input parameter is really a HashTable. I'd like to present a dialog that allows the user to enter any number of key value pairs. The optional "editor" element looks promising because it allows you to specify a ui-component. I have searched and searched for sample code, but haven't found any. Would some kind soul please point me to a resource that shows how to implement such as custom UI (whether it involves the "editor" element or not)?
Here's a link to the ui-component element in the reference:
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?href=000959.html#1548965&accessible=true
Thanks,
Halynn

I appreciate the reply.
I was actually trying to point to another page, although that page may be applicable. Apparently the URL in my browser window was not sufficient to recreate my state in livedocs. I was looking at the reference for component.xml, specifically where it describes an optional <editor> element of <input-parameter>. This <editor> component also has a child called <ui-component>. I haven't found any sample code that uses these two elements.
I need to call my component with a Map or Hashtable (an arbitrary set of Key/Value String pairs). This Map needs to be easily configurable in LiveCycle Workbench. I've seen numerous operations that popup dialogs for input-parameters and serialize their data. I was thinking that I will have to implement my own dialog.
It sounds like you are suggesting I can achieve this with a variable and the set value service. I don't quite understand. How would I insert the string pairs?
Thanks,
Halynn

Create transaction for update a custom table

Hi,
I have a custom table Z****. What are all the steps to create a transaction for updating my custom table? I don't want to use SM30 anymore.
Thank you.

Create a Table maintainence through the maintainence generator.
Open table in SE11, goto utilities => table maintainence generator.
Once the generator is created,
In the same screen of generator - Goto Environment => Transaction Code
Select Transaction Code with Parameter.
In the default values - Enter the Transaction as SM30 . Select skip first screen.
In default values at the bottom
Add
screen field = VIEWNAME and value = Ztable name.
screen field =UPDATE and value = 'X'.
Edited by: Pranu Pranu on May 19, 2010 2:36 PM

Call statistics for customer functions (CMOD)

Hi experts,
I wonder, whether R/3 4.6C provides an option to generate a call statistics for customer functions (w/o adding additional logging code in the ZX-includes).
This would be beneficial to identify customer functions called frequently (and to check/improve the performance of these subsequently).
I am aware of a similar feature for BAdIs as well as the coverage analyzer (in NW'04s).
Regards
Thomas

Hello Thomas
On a 4.6c release I would use the following approach:
(1) Identify the transactions which pass user-exits
(2) Analyze transaction log
Regards
Uwe

MB21 transaction- Calling screen for inputs by customer

Similar Messages

Maybe you are looking for