MBO - How to switch the position of two pushbuttons ?

Hello Everyone,
Please, may someone help me on this question:
In the "Status Flow" Datasheet I specified 3 pushbuttons for a status. The previous Status and Subsequent Status were correctly configured in OOHAP_BASIC. However I did not find where I can configure the position of these pusbuttons when they are displayed on frontend or backend.
For example I would like to switch 2 pushbuttons:
| button 1 | | button 2 | => | button 2 | | button 1 |
How can I do that ? Is there a configuration table ? Shall I use a specific Badi ?
Thanks in advance for your answers.

>
JONATHAN DEPRAETERE wrote:
> Thanks Michael for your express answer.
>
> Actually, I had already tested that solution ... and so I had changed the sequence of my pushbuttons during creation. However I noticed a strange behaviour during the activation. Indeed, even if I modify the sequence, after activation, the pushbuttons sequence comes back to the initial sequence.
>
> This behaviour is visible directly in the datasheet "Status Flow" and so in the backend and frontend display.
>
> Do you have an Idea, what would the root cause be ?
>
> Thanks in advance.
interesting, maybe my original understanding was wrong than.... another try would be that it is sorting the pushbuttons in the status flow tab, based on the column ID.
in tcode - oohap_basic - try switching the sequence of the push buttons based on their pusbutton ID.
than recreate the pushbuttons on the status flow tab...
if it's not that, than I am thinking it just arranges itself automatically in the status flow tab based on what the pushbutton does (moves it a previous status vs a future status) - i doubt it is that smart though...

Similar Messages

How to swap the position of two objects?

I have four self made componensts that I imported them into my main mxml file
and placed each on four corners.
What I want to achieve is to drag each component onto others then swap their position.
For example, comp A is dragged over comp B, when this is detected, swap the position of A and B.
But at the moment it doesn't seem to work properly. I could not figure out what's wrong with my code. Could any one help me achieve that?
Many thanks to any who could give me a hand!
*********This is one of my component***********
*********All other three components are made the same way, except each source of image file is different******************
<?xml version="1.0" encoding="utf-8"?>
<mx:Box xmlns:mx="http://www.adobe.com/2006/mxml" width="42" height="42">
    <mx:Image source="Images/air.png"/>
</mx:Box>
*********This is my mxml that calls my components***********
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:comp="Comp.*" creationComplete = "onInit()">
    <mx:Script>
        <![CDATA[
            import mx.containers.Box;
            import Comp.Icon_illustrator;
            import Comp.Icon_air;
            import Comp.Icon_flash;
            import Comp.Icon_flex;
            private var i_1:Icon_air; //1
            private var i_2:Icon_flash; //2
            private var i_3:Icon_flex; //3
            private var i_4:Icon_illustrator; //4
            private var origX:Number;
            private var origY:Number;
            private var startObj:String;
            private var icons:Array;
            private var h_1:Box;
            private var h_2:Box;
            private var h_3:Box;
            private var h_4:Box;
            private function onInit():void{
                //initialise all icons
                i_1 = new Icon_air();
                i_2 = new Icon_flash();
                i_3 = new Icon_flex();
                i_4 = new Icon_illustrator();
                i_1.name = "i_1";
                i_2.name = "i_2";
                i_3.name = "i_3";
                i_4.name = "i_4";
                //populate icon
                showArea.addChild(i_1);
                showArea.addChild(i_2);
                showArea.addChild(i_3);
                showArea.addChild(i_4);
                //set x position
                i_1.x = 100;
                i_2.x = 200;
                i_3.x = 100;
                i_4.x = 0;
                //set y position
                i_1.y = 0;
                i_2.y = 100;
                i_3.y = 200;
                i_4.y = 100;
                icons = [i_1, i_2, i_3, i_4];
                //addEventListeners
                for(var i:int=0; i<icons.length; i++){
                    icons[i].addEventListener(MouseEvent.MOUSE_DOWN, moveMe);
                    icons[i].addEventListener(MouseEvent.MOUSE_UP, stopDragMe);
            }//end of onInit
            private function moveMe(e:MouseEvent):void{
                e.currentTarget.startDrag();
                showArea.setChildIndex(DisplayObject(e.currentTarget), 0);
                origX = e.currentTarget.x;
                origY = e.currentTarget.y;
                startObj = e.currentTarget.name;
            private function stopDragMe(e:MouseEvent):void{
                if(this[startObj].hitTestObject(icons[1])){
                    trace("hit 2");
                    this[startObj].x = i_2.x;
                    this[startObj].y = i_2.y;
                    i_2.x = origX;
                    i_2.y = origY;
                }else if(this[startObj].hitTestObject(icons[0])){
                    trace("hit 1");
                    this[startObj].x = i_1.x;
                    this[startObj].y = i_1.y;
                    i_1.x = origX;
                    i_1.y = origY;
                }else{
                    trace("hit others");
                    this[startObj].x = origX;
                    this[startObj].y = origY;
                e.currentTarget.stopDrag();
            }//end of stopDragMe
        ]]>
    </mx:Script>
    <mx:Panel id="showArea" width="400" height="300" layout="absolute" backgroundColor="0x999999"/>
</mx:WindowedApplication>

Here is a sample of swaping two objects in Flex (not Air)   I believe it is the same. Take a look at the way the x and y coords are swapped using the dragInitator and the currentTarget object in the dragDropHandler.
Hope this helps
<?xml version="1.0" encoding="utf-8"?><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:local="*">
<mx:Script>
<![CDATA[
import mx.containers.Box;
import mx.core.UIComponent;
import mx.managers.DragManager;
import mx.core.DragSource;
import mx.events.DragEvent;
private var dragProxy:Box= new Box();
public function dragDropHandler(e:DragEvent): void {
//These variables are the x and y coords of the objects
//the e.dragInitator is the object being dragged
//the e.currentTarget is the object being dropped on
//First save the x and y coords of each of the objects
var xdi:int = e.dragInitiator.x;
var ydi:int = e.dragInitiator.y;
var xct:int = e.currentTarget.x;
var yct:int = e.currentTarget.y;
//now switch them around.e.dragInitiator.x = xct;
e.dragInitiator.y = yct;
e.currentTarget.x = xdi;
e.currentTarget.y = ydi;
public function dragEnterHandler(event:DragEvent):void {
DragManager.acceptDragDrop(UIComponent(event.target));
public function mouseMoveHandler(event:MouseEvent):void {
if(event.buttonDown == false) return;
var dragInitiator:UIComponent = event.target as UIComponent;
var dragSource:DragSource = new DragSource();
dragProxy =
new Box();dragProxy.width = dragInitiator.width;
dragProxy.height = dragInitiator.height;
dragProxy.setStyle(
"borderStyle","solid")dragProxy.setStyle(
"borderColor","0x000000")dragProxy.setStyle(
"backgroundColor","0xc6c6c6");
DragManager.doDrag(dragInitiator, dragSource, event, dragProxy,
event.localX * -1, event.localY * -1, 1.00);
]]>
</mx:Script>
<mx:Canvas width="84" height="93" x="23" y="14" borderStyle="
solid" borderColor="
#030303" backgroundColor="
#F83C3C"dragEnter="dragEnterHandler(event)"
dragDrop="dragDropHandler(event)"
mouseMove="mouseMoveHandler(event)"
>
</mx:Canvas>
<mx:Canvas width="84" height="93" x="223" y="14" borderStyle="
solid" borderColor="
#030303" backgroundColor="
#C5F83C"dragEnter="dragEnterHandler(event)"
dragDrop="dragDropHandler(event)"
mouseMove="mouseMoveHandler(event)"
>
</mx:Canvas>
</mx:Application>

How to fix the positions of two Mail.app viewer windows on the screen?

I use Mail.app as my main IMAP Mail application. I work with two Mail viewer windows which I position on the screen so that the upper window shows the Inbox and the lower window the Send-box. The windows are aligned to each other and do not overlap. Fine.
But when I quit Mail.app and open the program again, the windows have forgotten their postions. They "jump" to a new location on the screen. This is in contrast to all other applications I use. Another bad example of window managment is the Mail.app-Preferences window which also does not stick to a given position.
Is this a (known?) bug or does it only happen on my Macs? (two: one in the office, one at home, both running 10.4.6)

I guess the difference is that my description text is longer.
Try this text for a new rule:
"From: blacklisted senders 1 - move to SPAM-blacklisted-addresses"
When you want to see this text completely with the default font, you will need to enlarge the Preferences window for "Rules". After that, click to "Signatures": the window stays at the enlarged width. Then click on any of the other areas in Preferences, and the window goes back to the "normal" width. When you then click on either "Signatures" or "Rules", the Preferences window will stay at the "normal" width (resulting in a truncated display of the rule description text).
Also: when you have moved the Preferences window to a position not covered by a (large) viewer window to access it with a mouse click, close the window and re-open Preferences, it is back to a position covered by the viewer window. Again not accessible when the viewer window is the front-most Mail.app window. BTW: the "Activity viewer" window does a better job in sticking to a fix position.

Did you know how to link the text in two or more text boxes?

Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.

It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done.

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

In BADi , How to pass the values between two Method

Hi Experts,
We have two methods in BADis. How to pass the value between two Methods. Can you guys explain me out with one example...
Thanks & Regards,
Sivakumar S

Hi Sivakumar!
Create a function group.
Define global data (there is a similiar menu point to jump to the top include).
Create one or two function modules, with which you can read and write the global data.
In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
Regards,
Christian

How to get the difference of two dates in years,months and days

Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanks

Something like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2             select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3             select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4             )
5 -- end of test data
6 select c_start_date, c_end_date
7        ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8        ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9        ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT        YRS      MNTHS        DYS
17-NOV-06 21-JAN-08          1          2          4
21-NOV-06 17-FEB-08          1          2         27
21-JUN-06 17-JUL-08          2          0         26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to get the intersection of two arraylist containing user defined obj??

How to get the intersection of two arraylist containing user defined obj??
I can easily get the intersection of two array list which containing some simple class(Integer, String). But how to get the intersection of two arrayList which contain user defined object?
Here is the sample code..I can not run this out...anybody can help me? thank you very much..
The correct result should be like this:
2
2
but I can only get this:
2
0
import java.util.*;
public class testRetain{
     public static void main(String[] args){
          ArrayList a = new ArrayList();
          ArrayList b = new ArrayList();
          a.add( new dog(1,2,2) );
          a.add( new dog(1,2,1) );
System.out.println(a.size() );
          b.add( new dog(1,2,2) );
          a.retainAll(b);
System.out.println(a.size() );
class dog implements Comparable{
     int head;
     int arms;
     int legs;
     dog(int head, int arms, int legs){
          this.head = head;
          this.arms = arms;
          this.legs = legs;
     public int compareTo(Object o){
          if ( ((dog)o).head > this.head )
               return -1;
          else if ( ((dog)o).head < this.head )
               return 1;
          else
               return 0;
}

@Op. Your classes should override equals and hashCode
Kaj

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

How to copy the positions and their relationships of one org.unit to other

f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

Hi.
This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
Hope this helps

How to compare the contents of two different tables

hello. can somebody give me an idean on how to compare the contents of two different tables in mysql?
example, i have a table named Main List and a table named New List.
The contents of the New List should be compared to the contents of the
Main List, to check if they are equal. I don't have any idea how to manipulate
this data. Hoping for your help. Thanks.

it is better to comapre it using java.. try get the resultset first and store that in collections then comapre the two collections

How to compare the programs in two different systems

Hi,
I have two systems say A & B and i have the program say 'Z_TESTPROG'.
How to compare the program in two different systems.
Regards,
Venkat

Hi,
Check the version in Utilities -> version -> version management in both servers is one option.
Another one is using SE39 transaction.
Regards
Manasa

How to Break the cluster between Two servers

Hi Experts,
Since Iu2019m new to BOBJ XI R2.I would like to know how to break the cluster between two servers.
Description :
So far we took the copy of QAS Server1 to the new QAS server2 (Through Mirroring Tool ). Now those two servers are cluster together, I can see QAS server1 CMS Name, Cluster Name, cluster member name in QAS Server2 (CMC-> Setting -> Cluster).
Besides in QAS Server1 CMS Name and Cluster name are pointing to the QAS Server1, except Cluster Member (This is still have two members Server1 and Server2).(CMC-> Setting -> Cluster).
In QAS Server1 and QAS Server2 (CMS-> Servers), I can able see both server name under Machine Name tab.
I would like to make those two servers as independent servers. There are two different data source for those two servers. I want to remove the cluster in both servers.
Right now QAS Server1 is running and QAS Server2 is stopped.
If i create/modify a group under new Mapped NT Member Groups in QAS server2 ,it is getting reflecting in QAS server 1.
Could you please tell me the steps to resolve this problem.
BO Version: BO XI R2
Regards,
Sridharan

Hi,
Maybe the external CMS is still 'attached' to your SIA node. Please go to the CCM (Central Configuration Manager) and stop the SIA (Server Intelligent Agent). On one of the tabs you can see if there is an external CMS part of your environment. Delete it and restart the SIA. Retry if you can delete the services now from within your CMS. It may well be that you have to stop both environments and delete each others CMS via the CCM to get it working. If you have not changed any permissions for your Administrator account the security model will not be the one causing this.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken

How to share the data between two or more frames

How to share the data between two or more frames based on the database relationship in JDeveloper?

You can pass data between frames by passing it as parameters.
That is when you are invoking another frame, pass your data as arguments through the constructor to that frame .
You can also achieve this through static or public methods, but static variables as we know is not suggested which might occupy more memory space.
Regards,
Srinivasan AShwath
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
How to share the data between two or more frames based on the database relationship in JDeveloper? <HR></BLOCKQUOTE>
null

MBO - How to switch the position of two pushbuttons ?

Similar Messages

Maybe you are looking for