MC16C line card stuck in L2 only mode

I have a UBR 7246VXR with MC16C line cards in it. They are tied to a bundled interface. I have removed cable line card 4/0 from the bundle and tried to assign as IP address to it, but it says "IP addresses may not be configured on L2 links". I have never seen this before. Anyone know how to fix this?
Thanks,

Well I found the answer to this one so I thought I would share it:
As of Cisco IOS Release 12.3(21)BC, all cable line cards are automatically part of virtual bundles. Removing a line card from one bundle means it has to be configured as part of another virtual bundle.

Similar Messages

Internal card reader thinks SD card is in "read only" mode??

I just took some pictures with my digital camera which use SD cards.
I then took the card out of my camera and put it into the built in SD reader on my 13" MacBook Pro. (same way as I always do)
However, the Finder thinks my card is in "read only mode" as I can not delete or add pictures on the card. I took out the card and toggled the read-only switch thinking maybe it got stuck or something, and tried it again. Still no luck.
Then, I tried a USB card reader. That reader detected the card, and let me read and write to the card.
This is the first time this has ever happened.
Any ideas why the internal card reader wouldn't anything other then read the card while my USB card reader could read and write no problem?
Thanks,
Scott

I reset the PRAM but it did not help.
I think I found the solution though.
It depends on the way you insert the card.
You can't just slide it in. Rather, you have to push it in a special way (which I can't describe or remember)
So I guess the answer is, if the card comes up as read-only, take out the card, and push it in a different way until to comes up correctly.
I replicated this issue twice so that is why I believe it is the alignment that is the problem.
If it gets any worse, I'll probably have to get the slot serviced but considering I only use the slot once a month or so, its not top priority. Too bad I couldn't just have an extra USB port, or an express card slot - but apparently Apple thinks SD cards are more important...

ITunes stuck in activation only mode

I have been unable to fix this with copious google searches. Computer is running Windows XP Pro SP3.
We are using the appropriate switches to launch iTunes in activation only mode and also to take it back out of activation only mode. I have tried creating separate shortcuts and I have tried doing it from a command prompt window.
iTunes is stuck in activation only mode and won't come out of it. If I log in to the computer with a different user account I am able to launch in normal mode. This problem seems profile related but I have searched the registry and been unable to find a key for iTunes that would obviously be causing this problem. The app has been reinstalled - made no difference.
What is the problem here? I would prefer to not delete the profile that iTunes is "stuck" in if possible. Thanks

Logged this as a SR on Metalink and the problem seems to be down to use of colons in my connection names.
I was using a naming convention of
host:SID for accounts connecting as system and
host:SID:schema for accounts connecting as specific schema
Which nicely groups and orders my connections by host. Sadly this prevents edit of stored pl/sql units (package, procedures, functions)

Editor stuck in read only mode

Am able to connect to a 9i database, but am unable to edit any code. Logon appears successful, connection made, and am able to query the database. However, when I open stored procedures for editing, the edit window doesn't respond to any keystrokes.
The editor behaves as though I were in some kind of read-only mode. However, when I exit the procedure, I am prompted to save "changes".
James Brockman

Logged this as a SR on Metalink and the problem seems to be down to use of colons in my connection names.
I was using a naming convention of
host:SID for accounts connecting as system and
host:SID:schema for accounts connecting as specific schema
Which nicely groups and orders my connections by host. Sadly this prevents edit of stored pl/sql units (package, procedures, functions)

New form stuck in QUERY-ONLY mode

I just developed a new screen and for some unknown reason, it runs only in QUERY-ONLY mode when launched from the developer. I have checked every preference and setting I can think of and nothing seems oout of order! This is only happening to this one screen, so I am at a loss. Any suggestions?

send me the form if you can, as I have never seen problem like this in my 5 years of oracle

Iphone stuck in headphone-only mode

my iphone works fine with headphones plugged in, but is silent when they are not. It can't seem to tell that the headphones are not plugged in. When I use the hard keys to adjust ringer volume, the display says ringer (headphones) even when the headphones are not plugged in. I have to switch to speaker mode to make headphone-free calls.
Hardware problem?

This didn't work for my iphone.
Instead, I put the iphone on speakerphone for approximately 8 minutes and then it went back to the normal phone mode. However it phased back to headset only.
Is this a major problem that others are having with their iphones? Any other solutions for fixing this problem?

MOVED: K8N Neo2-F + Vista + Nvidia card = Stuck in AGP 4x mode?

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=106660.0

Some AGP VGA's are picky when they need works @x8, tips to solve the issue:
* Disable AGP Fastwrite {If N/A in BIOS, can be forced off by VGA drivers, or Rivatuner}
* Switch to AGP x4 {If option is N/A in BIOS, you can use Rivatuner http://downloads.guru3d.com/download.php?det=163 /* By strap driver */}
* Disable AGP 3.0 Calibration Cycle
* Disable AGP Sideband Addressing
* Disable AGP Master 1 WS Read/Write
* Update to the latest AGP Gart driver

Apple TV: Safari-only mode (stuck)

Good afternoon,
I opened my mother's apple tv/internet screen in guest-user mode, expecting that all I needed to use youtube was safari. Unfortunately for me, not only does her safari-only mode NOT support videos, I cannot seem to get out of safar-only mode and back to her regular login screen. Even when I restart the whole system, it opens back up to safari-only mode. How can I reset it back to her correct login screen (before she comes home/finds out/kills me)? I can't seem to find an answer that works for me!
Thanks very much.

Oops. I'm not exactly Apple literate (and neither is my mother...that's why I'm trying to take care of this before she comes home). I don't know exactly what it is, but the internet that she has connected to her tv/apple tv.
Regardless of whether or not Apple TV has a safari browser, the (Apple) computer on her television is stuck on safari-only mode and will not switch back to her account/let me log out/do anything, really. Maybe you have a suggestion to where I should move this post, then?

SD card is suddenly read only (and it never used to be before).

I'm not tech-svvy at all, so I'll try to be as detailed as I can with my problem and hopefully some patient soul will be able to give me some step by step instructions on how to fix this haha.
I've had my MacBook Pro for about a year now and I haven't had a problem with transfering photos from my phone and camera onto it. My camera has an SD card and my phone has a Micro SD.
As of a few days ago, I've noticed that when I insert my SD card into the slot, there's an icon to the top left side of the window when I open it that never used to be there. It kind of looks like a pencil with a line going through it, but it still let me transfer photos to my computer, so I didn't think anything of it.
When I tried to transfer photos from my phone's Micro SD, it does the same thing. I can still transfer pictures to the computer without a problem.
The issue becomes when I want to transfer photos from my computer to the card for my camera or the one for my phone. I've tried to look through similar questions on here and elsewhere on the internet, but all I've been able to gather is that the little pencil with a line through it means my cards are in "Read Only" mode as opposed to the "Read and Write" that they should be in.
I don't recall making any changes to any sort of settings on this computer and I haven't had any recent updates to the software.
Also, none of the cards are locked. I know there's a little swtich to the side of them that manually makes them read only, but I never touch them and they're always 'unlocked' as it were.
Can anyone guide me through getting these settings back to the way they were?
(Since I'm technologically illiterate, I have no idea what operating system I'm on, so I apologize if this is an important factor in helping me.)

The contact inside the SD card slot could be dirty. you can try to clean them by shutting the system down, get some electrical contact cleaner and put a small amount on the SD card contacts and push it in and out a few times. Let it dry for a few minutes (most of these type contact cleaners alcohol based and dry fairly fast) and power up the system. See if the cards are now Read+Write.
Also check the cards to see if the little switch hasn't been pushed into the Lock setting.
Even though these card may work in your camera and or phone they may be at the end of there life cycle. Try a NEW card and see if that makes a difference.
As a last resort you can always buy a external card reader and connect it to a USB port.Some SD cards come with a small SD card reader that plugs directly into a USB port. The only problem I've had with them is that some of them do not go in all the way on MBPs. The case of the MBP stops them from inserting all the way and or if you have something else plugged in to the other USB port there isn't enough room, right to left, to insert another device. Or you could spend some more money and have Apple Care fix it, that is if none of the above work.
Good Luck.

Can't change activation only mode to off using the command line in Windows 7 64 bit

I used the command line to turn activation only mode on and now when I use teh command to turn it off it will not change the iTunes setup. I am on Windows 7 64 bit. I tried uninstalling itunes and reinstalling and it is stillin activation only mode.

Hi! Thx for your quick reply! I am still unsure what to do tho---see my questions below in bold:
Windows 7 comes with its own version of the standard PostScript driver. = Where is this driver? I have no idea how to find it, it doesn't show up in my Printer menu in FM?
Given that PostScript generated by a driver can be highly device-specific, you need to install the driver as modified by the PPD file for the device in question. Most printer manufacturers in fact provide a PostScript driver installer that associates their printer's PPD file with the standard Windows Printer driver and subsequently creates what is called a PostScript printer driver instance for the particular device on the I/O port you designate. = ??? I've only updated a PPD file for watermarks and have no idea what this means...is there a step-by-step instruction for this? I just need to download a PS driver to select that works & doesn't freeze up my FM when creating a .ps file.
The real question thus is exactly what are you trying to generate PostScript for? = I create a PS, & then use Distiller to create a PDF. This enables me to have a PDF that automatically has Bookmarks, the TOC/LOF/LOT & all corss-refs are hyperlinked, etc.
If you are trying to create PostScript for distillation into PDF, Acrobat installs a PostScript driver instance of its own, labelled Adobe PDF, that is associated with the Acrobat Distiller PPD. = I have tried the Adobe PDF selection from my Printer menu in FM, but it freezes up FM and I have to close the whole program & no PDF generates.
BTW, although you may be successful in installing and running FrameMaker 8 on Windows 7, in fact Adobe officially does not support FrameMaker 8 on Windows 7. = I don't know what to say---the upgrade is too expensive for some of us folks out here right now, so we all need to work with what we have for now!
I appreciate your help, thank you.

Audio Line Out Stuck in Optical Mode Toothpick Technique

My macbook's audio line out is stuck in optical out mode. (red light and everything) Many have had this problem and many have fixed it with a toothpick. I want to know how this is done. People just keep saying that they fixed it without explaining what exactly they do with the toothpick. (I'm looking for incredibly specific instructions) Any help would be great!

Not much to say, fixing problems while the warranty is still good seems like common sense ...

SD Card Slot READ ONLY mode.

I have this problem.
My SD Card Slots it's in READ ONLY MODE.
I already use the SD cards in this computer without a problem, they we're always read/write. Not anymore since a month. (I think from the last software update, but I'm not sure of this).
Someday, without notice, all these cards are read only on my macbook pro.
I don't have this problem with my G5. I can read/write on these SD cards. Of course, all of them are unblocked.
I tried in several formats (formatting the cards with my G5). Same results.
My Macbook Pro 13 (last edition so far, I brought it on November 2010).
I read is probably A Snow Leopard 10.6.6 problem.
So I reinstalled the system without updating the computer, but the problem is the same.
ANY SOLUTIONS?
Message was edited by: Daniel_Italia

Went to the Apple store today. I opened up my MBP the SD card worked perfect, no issues.. I couldn't believe it. But after we (me and the tech) removed the card a few times / formated it. It stopped working and started setting it for read only, and we couldn't get it back to read / write. IE same issue as we were posting.
The tech spoke to his lead technician, which both said they have never heard of this, but decided that the motherboard is defective and needs to be replaced. So I left it there for them to replace it. Price, if out of warrenty, was 650.00. Can't remember if that included labor. I have AppleCare (which they didn't have on record) so free for me. Glad I paid the 350 when I bought the laptop.
Overall I waited an extra 15 minutes before being seen. A little annoyed about that. But the tech was very nice, professional, and helpful. I did ask about the SMC, but we were talking about a couple of things and that kind of got lost in the shuffle and I completely forgot.... Sorry I had "I am Number 4" on my mind as we were planning on seeing that next.
Will update as soon as I get it back
Message was edited by: skygremlin

Qosmio G25: Vertical lines of stuck pixels

I have a huge problem with my Toshiba Qosmio G25:
My LCD screen has 2 lines of stuck pixels, one pixel wide, running from top to bottom. Before continuing I would like to stress that my computer has not had any physical trauma of any kind and generally is used like a desktop.
Has anyone else experienced this problem? Is there any quick fix which I can handle on my own or is the only solution sending in the laptop for service? How are problems like this handled, will toshiba replace the screen or will they completely replace the computer? I would much rather prefer fixing this on my own with your suggestions as opposed to a lengthy wait on service.
All my schoolwork depends on my computer and I would be powerless without it for several weeks. Please if anyone has encountered this issue and resolved it, I would appreciate it if they could share their experience and knowledge.
Thanks for your time.

Hello Makaroni
It is not easy to say if this occurs because of LCD malfunction or even because of defective graphic card. You can check how it works with external monitor to see if the problem persists.
Anyway I dont believe you can do anything on your own especially if the graphic card or LCD display is defective. The hardware must be replaced. I know that it is very annoying but I recommend you to contact service in your country. Save all your data to USB memory stick and try to finish your work on some friends PC.

7600 / SUP720-3BXL - mixing fabric and non-fabric enabled line cards

Dear All,
I am having to mix fabric and non-fabric enabled line cards on a single chassis.
These are my line cards:
WS-X6704-10GE
WS-X6408A-GBIC
WS-X6148-GE-TX
What's the maximum expected throughput in running with mix fabric line cards ?
Also, what will be the optimal and the recommended switching mode to run (truncated vs. bus-mode) ?
Any inputs will be greatly appreciated.
egards,
ZH

hi!
The maximum throughput will depend on the ingress and the egress card for the traffic. i.e. If the traffic is coming on the fabric enabled card and going out on the same, then the throughput is would be equal to the fabric card ( 20 gbps duplex). But if there is a non fabric card either in the ingress or egress path, then the throughput would be limited by the non-fabric card.
As for the mode to run in, I dont think you would have to worry on that as a fabric card would default to truncated mode where-as the non-fabric cards would run in the bus mode. This works fine, as if the ingress to egress is a fabric card, only the header is sent to the superviser for processing using the tuncated mode and the packet is just sent on the fabric directly to the egress port.
If there is a communication between fabric-non-fabric cards, then the fabric card still uses truncated mode to get the packet processed by the L2/L3 engines on Superviser and then if the egress is a non fabric card, then the packet is sent over the fabric to the superviser. From there the packet is sent to the egress over the bus.

Question about Line Cards

Hello,
I have several 4510E+R switches with the following modules:
Mod Ports Card Type                                                      Model
---+-----+--------------------------------------                        +------------------
1    48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
2    48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
3    48 10/100/1000BaseT UPOE E Series               WS-X4748-UPOE+E
4    48 10/100/1000BaseT UPOE E Series               WS-X4748-UPOE+E
5     4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP)     WS-X45-SUP7-E
7    48 10/100/1000BaseT UPOE E Series               WS-X4748-UPOE+E
8    48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
10    48 10/100BaseTX (RJ45)                                  WS-X4148-RJ
As you can see, the WS-X4148-RJ is an older line card. Our other 4510s have 2 of these same older line cards installed and are used for the wired side of our Guest network. Are there any potential negative results of using these older line cards in these chassis? The reason we do this is so that we have less switches to manage on our network and don't have to worry about purchasing additional equipment to accommodate our wired guests.
Thanks!

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I'm not aware of any major adverse impact.
The "original" 4500 cards were limited to 6 Gbps per slot, but that's fine for a 48 FE port card.

MC16C line card stuck in L2 only mode

Similar Messages

Maybe you are looking for