MCSI data is not validating aginst BI

Hi,
On the R/3 side when a order item is changed in a different month from the month the order was created, the MCSI report on R/3 is showing the data correctly. The same order is not being seen correctly in the BI. It is showing this in the monthly bucket of when the order is created rather than the monthly bucket of when the item is changed. To summairse, is it possible to track the modification for an order item in BI
thanks,
PV

Summarising the changes for sales order is not availale using standard extractors. One has to write Generic extractors to capture this in BI. Typically not an ideal scenario for BI reporting.

Similar Messages

Conversion from string "20041023 " to type 'Date' is not valid.

Hi ,
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report.
Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ? Can anyone help me with the solution.
Thanks,
Kittu

Hi Jmcmullen,
Found one more issue on the same. I have one value like "00000000" for the column(EmpHiredate)
, when i use above expression values(ex:"20141023")
are displaying in dd/MM/yyyy format in report except value like "00000000" and giving following error:
[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "0000/00/00" to type 'Date' is not valid.
Even i tried to pass its original value("00000000") as below but no luck.
=IIF(Fields!EmpHireDate.Value = "00000000","00000000",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Also tried this:
=IIF(Fields!EmpHireDate.Value = "00000000","2000/10/21",Format(CDATE(MID(Fields!EmpHireDate.Value,1,4) + "/" + MID(Fields!EmpHireDate.Value,5,2) + "/" + MID(Fields!EmpHireDate.Value,7,2)),"dd/MM/yyyy"))
Please Suggest.
Thanks ,
Kittu

Display error messages in Visual Composer if Input Data is not valid

Hi,
We developed a small iView with a single input field FO (Factory Order).
The output is a table with some fields corresponding to the given FO.
My requirement is if the given FO (Factory Order) has no data then the table should not be displayed, instead a message should be displayed saying
'No Data is found' and stop the program.
Please reply soon if anyone has got a solution.
Thanks,
Shashidhar

Hi
You can use <b>guard condition</b> of the event to check whether input field(FO) has data or not. When the input field is empty , you can open a <b>pop-up iView</b> displaying "No Data is found" and when the input field has data , you can execute your service to produce the table output.
If, you have any more doubts, revert back
Thanks & Regards
Harsimran

Displaying "N/A" in report fields where Number data is not valid using a formatting formula

Post Author: Horizon57
CA Forum: General
I have many reports which are populated by "Number" data. However, there are certain charts and tables where the number data is not appropriate and the summation of such data does not add value to the report. In these instances I would like to display "N/A", however the formula I am using keeps giving me an error that I need to use a "Number" data type. Please note this is a formatting formula.
Formatting Formula
DO{TREND.EPTP1} = 'N/A' AND{TREND.EPTP2} = 'N/A' AND{@Trend %} = 'N/A' WHILE {TREND.POS2} = 'TOTAL';
Can anyone assist me with displaying "N/A"?

Post Author: V361
CA Forum: General
Try this
DOtotext ( {TREND.EPTP1} ) = 'N/A' ANDtotext ( {TREND.EPTP2} ) = 'N/A' ANDtotext ( {@Trend %} ) = 'N/A' WHILE {TREND.POS2} = 'TOTAL';

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Power View in SharePoint Server - The data extension type for a data source is not valid

Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
Thanks

I am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch and now I'm getting this message... "Account Not In This Store Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store... help!

I am traveling out side of the U.S. and I am trying to up-date some apps on my iPod touch. Now I'm getting this message... "Account Not In This Store. Your account is NOT valid for use in the Ecuadorian store. You must switch to the U.S. store"
Please, is there anyone one out who can help me solve this problem? I just can seem to figure out how to get to the U.S. store... thanks!

I just read this solution, tried it & now it's working...
I think I found a fix...I went to Settings, iTunes & App Stores, then click on your Apple ID...view Apple ID...change country region to USA (even though it was already USA...just do it again...go through the steps making sure the United States store is selected...agree to the Terms of Service, THEN I think what the key is is to RE-auhorize your credit card...in my case all I had to do was enter the security code...and it worked...I am now able to download the YouTube app for example...couldn't do it before.

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

Web template :Error Valid Data provider not assigned

Hello Friends we have the web template that was working before , we did the upgrade to SP13 from SP11.
It gives the error Valid Data provider not assigned and
Bad integer Parameter value of Parameter BLOCK_COLUMNS_SIZE of Object item:ANALYSIS_ITEM:ANALYSIS;
Please help where do i need to assign the Data provider beacuse the Values are same for Dataprovider as before
Portal Runtime Error
An exception occurred while processing your request
Exception id:
See the details for the exception ID in the log file.
Thanks
Soniya
Message was edited by:
soniya kapoor

Open the template in WAD and do a validation against the server and make sure the template is well formed.
Also make sure you apply BI JAVA Patch 1 for SPS 13.

The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)

Hi there,
All my reports are throwing below error in a sharepoint site configured with Access services. Does anyone have a clue what's causing it?
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)
Thanks
Manvir

Hi Manvir,
For troubleshooting your issue, please go to C:\Inetpub\wwwroot\wss\VirtualDirectories\ find your Web Application (represented by a port number), then delete an unknown folder created by sharepoint, namely vti_cnf from all the folders and sub-folders in
your web application.
Reference:
http://forums.asp.net/t/985790.aspx?Data+at+the+root+level+is+invalid+Line+1+position+1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

The SQL statement is not valid - when importing data from SQL Server using a query

Hi there,
I am trying to import data from SQL to Power Pivot using a SQL query like below:
SELECT Score.FieldCount, Score.Record.GetAt(0), Score.Record.GetAt(1), Score.Record.GetAt(2), Score.Record.GetAt(3), Score.Record.GetAt(4)
FROM
SELECT * FROM dbo.CLR1(
dbo.CLR2('c:\FILES\Test.xml'),
'SELECT * FROM [dbo].[CXCustomer_Small]') Input
) Score
And when I tried to validate it, it returns
The SQL statement is not valid. A column name cannot be blank.
I ran the above SQL statement in Management Studio and it works without problem. Any idea?
Thanks!
Chu
-- Predict everything. http://www.predixionsoftware.com

Never mind, I figured out - I need to give each column a name.
-- Predict everything. http://www.predixionsoftware.com

IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date)

I am trying to uplaod an xml document sample which has an attribute of date datatype.
My sample is :
<?xml version="1.0" standalone="yes"?>
<document>
<name> test</name>
<createdate>1999/03/12</createdate>
</document>
I am getting this error:
IFS-12635: SimpleXmlParser: Value(10/10/99) not valid for type (Date).
If I input just the "name attribute" value, there is no problem. What is the date format, I should use?
Please suggest.
Thank you
null

Is there any way to specify the format in the custom type document itself. ? I do not want to specify the format in every document sample. Is there any way that it is possible. If I give the format in the document samples, as Matt said, there is no problem.
Now I tried to give the format in the type document itself.
I created a custom type document as follows:
<?xml version="1.0" standalone="yes"?>

<ClassObject>
<Name>myTestType</Name>
<Description> myTestType Document </Description>
<Superclass Reftype ="name">Document</Superclass>
<Attributes>
<Attribute>
<Name> Category </Name>
<DataType> String </DataType>
<DataLength> 80 </DataLength>
</Attribute>
<Attribute>
<Name> posted_date </Name>
<DataType format="mm-dd-yyyy"> date </DataType>
</Attribute>
</Attributes>
</ClassObject>
I could able to upload this to ifs. No problem at this time. But when I try to load the below sample, I am getting the same parse problem.(IFS-12635 SimpleXmlParser: Value(12-25-1992) not valid for type (Date.).
sample xml document
<?xml version="1.0" standalone="yes"?>
<myTestType>
<name> testing.myTestType</name>
<Category>Administration_4</Category>
<posted_date >12-25-1992</posted_date>
</myTestType>
Thank you.

The Value expression used in textrun 'Textbox.Paragraphs[0].TextRuns[0]' returned a data type that is not valid.

Hi all,
While viewing report in SSRS 2008 i am getting an error like this
Warning 1 [rsInvalidExpressionDataType] The Value expression used in textrun ‘Textbox21.Paragraphs[0].TextRuns[0]’ returned a data type that is not valid.
sotred procedure
ALTER
Procedure [dbo].[spGetSupervisor]
@START_DATE
datetime,
@END_DATE
datetime,
@CenterID
varchar(4000),
@TITLE
varchar(100)
=
NULL
as
Select
Distinct L1_ID SupID,
L1_Name SupName
from
REF_DB.info v
inner
join dbo.fn_MVParam(@CenterID
+
P
v
.CenterID
= p.Column1
where
v.startdate
<= @END_DATE
and v.enddate
>= @START_DATE
and
(v.title
IN
(@TITLE)
or @title
is
order
by Name
Here is the expression in Report textbox
=Parameters!CenterID.Label
Please
help me
Thanks
in advance
Jyo
null)
ON

Hi Jyo1105,
Thanks for your question. Based on my research and experiences, the issue may be caused by you set the @CenterID
is a multiple values parameter.
If in this condition, you couldn’t use the expression of
Parameters!CenterID.Value directly, you
should use a join() function on the parameter to merge the whole values, or add a sequence number behind the expression to use a specific value, just like this:
=join(Parameters! CenterID.Value) or
=Parameters! CenterID.Value(0)
If your issue still exsits, please feel free to let me know.
Thanks,
Sharp Wang
Best Regards. Sharp Wang

Validation "is a valid date" does not pass but Apex proceeding anyway

Hi,
I have a simple date-item which I validate first against "not null", then for "is a valid date", then that the date is not in the future.
In debug mode the first validation passes, the second ( is a valid date ) does not pass, but the validation process proceeds anyway...!? Then the third validation "date not in the future" produces ad DB-Error because it is not a valid date.
Why does the validation proceed even if the validation does not pass...?
Version 2.2.0
Juergen

Juergen,
"In debug mode the first validation passes, the second ( is a valid date ) does not pass, but the validation process proceeds anyway...!?"
Do you mean that the third validation is firing even though the second is failing? This behaviour is correct. All validations fire (regardless of any having already failed) unless they have specific conditions set on them to make them act differently.
If you don't want the third validation to fire if the second has failed then you will need to put a condition on the 3rd validation to prevent this. Alternatively you could bundle all you validations into one of type "PL/SQL returning Error Text" then have some IF...THEN...ELSE logic in your PL/SQL to return the relevant validatoin text depending on what the problem is (i.e. Date is null, date is invalid or date is in the future).
Andy

MCSI data is not validating aginst BI

Similar Messages

Maybe you are looking for