MCTC , MC(E and MC+Q Report

Hi all,
We are at final phage of implementation process, we are running report in MCTC , MC(E and MC+Q while executing this report system giving different options like in
MCTC -- 1) Incoming Orders 2) Sales 3) open order quantity 4) Gross sales
MC(E -- 1) Incoming Orders 2) total order quantity 3) order items 4) open order quantity 4) open orders 5 ) Gross orders
MC+Q -- 1) Sales 2) Billing quality 3 Inv sales cost 4) gross sales
Can any one guide me what is different between respective heads for example what is incoming order, sales open order quantity and gross sales or any other relevent link for reports
Thhanks
Ram

Hi,
Incoming order - Total value (Net) of sales order
Open Order Qty - Sales order Qty for which sales order is created but is not yet delivered
Open Sales order - Amount of sales orders of which materials are not yet delivered
Gross Sales - Gross sales means sales amount before calculating discount, freight and taxes.
After calculating these things Net value arrives
Total Order qty - Qty of Sales order
Order Items - No. of line items in the sales order
Hope you get some inputs
regards,
Sagar

Similar Messages

Open and cancelled Quote Report

Hi,
Can anyone give me the information for getting open and cancelled Quote Report?

I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

HST6.0 Header and footer in reports

Hi,
We have an application generated from designer 1.3.2 using Headstart, and now we need to upgrade that one to designer 6.0, Everyting works ok with the forms but when we try to generate reports we don't get any header and footer. I have looked into the demo application in Headstart and found 2 reports with header and footer but I can't figure out how to generate this from Designer.
Thanks in advance for any help!

These fragments might fall under the category of "other", as an example, there is a copyright fragment in the Other tab of the fragment toolbox window. You could copy that and enhance it to make your footer.

Customer and Vendor ageing report by ItemGroup@%@#$%@#$??

Hi All
How do we get Customer and Vendor ageing report by "ItemGroup"?
I know there is a standard report in Business One which gives you the ageing report by Business Partner Group. But I dont know whether it is possible to get by "ItemGroup". Please help me and excuse me for weird requirement..
Thanks

Hi Gordon,
that query is actually designed for getting the purchase reports with all the excise and other tax related information per line item in the marketing document. my requirement is something different than this where the client wants to see the ageing report by Itemgroup.
Since ageing is based on the invoice due date it looks difficult to bifurcate the each individual line item, its group, its line total and their due date. means we should add all the open invoices' line items to be grouped with its total based on the due date. any other way to solve this?
thanks

Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Siebel 8117 and BIP Multilingual reports not working.....

Hello,
We went live with Siebel 8113 and BIP. We have Siebel Reports configured in 4 languages and the choosing the language and locale on report generation pick applet worked fine with correct translated report coming out.
We have upgraded Siebel to 8117.
Reports stopped working. Applied 8117 related BIP objects(only repository objects and seed data - ACR 719B) then default language, ENU, reports worked fine. But other languages are still generating ENU reports.
Applied QF0703 in Tools (It has SIEBEL_BIP_8117 Extension SIF) and deployed the SRF.
Only two things from 8117 BIP related items we missed.
a) EIM Table related schema changes. This is of no use for us as we don't use EIM.
b) LMU files were not imported into tools. Each time I tried to import an LMU, it gives an error that site "http://www.oasis-open.org/committees/xliff/DTD" is an invalid site. On checking in browser found that it should be https and changed it in one language XLIFF. Once the transport changed to http, comes an error that the patch is invalid".
Not sure what is the importance of LMU OR how to get around it.
Any suggestions are appreciated.
-Ravi-

Can anyone help me on this please?

Reports Requirements using R12 and Oracle 10g Reports

Hi All,
Looking forward to some valuable inputs to propose a technical solution in R12 using 10g Reports Developer.
Requirements are :
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
2. Report Parameters to have multi selection criteria. ( Is this possible in 10g Reports and Oracle Apps, Report Manager responsibility ?)
Regards,
Anand

>
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
>
Yes, Reports can create output in Excel - but XML Publisher offers better and easier options.
>
2. Report Parameters to have multi selection criteria. ...
>
Pl explain what you mean by multi selection criteria.
HTH
Srini

Run VL06 in Background and getting the report in AL11

Hello ,
My requirement is as follows.
I need to develop a program which should VL06 tcode for Listing the Outbound deliveries in BACKGROUND with a specific variant and Layout and then the report data should be dumped to the given AL11 file path .No need to display the report.
I tried with Submit statement but here I can use the variant but not Layout option as Layout field is not the part of selection screen of VL06 tcode for lsitingthe outbound deliveries.
Can anybody please advice about how to proceed with this.
Thanks in Advance.....

Hello ,
Thanks for the reply ....
I tried with that ..i could see the list ...but i wanted to capture the same with predefined layout inthe result ofthe report .
There is no layout selction option in the selectionscreen of the report.
Please advice.

Hierarchy Analysis Authorization in BW and BOBJ Webi Report

Hello,
We have a scenario wherein we have implemented Analysis Authorizations (Hierarchy) on Organizational Unit info object (0ORGUNIT) and need to report on BOBJ WEBI. Our scenario is as following
ORGUNIT    - L0 (Overall Enterprise Level)
-     L1 (Enterprise - Continent Wise Split)
-     L2 (Enterprise u2013 Country Wise Split)
-     L3(Enterprise u2013 City Wise Split)
E.G-
      LO (Company ABC) MANAGER 0 will have access to the entire organization
           -L1 (ASIA) MANAGER1 will have access to ASIAN Subcontinent
                  -L2 (India) MANAGER 2 will have Access to country India
                            -L3 (New Delhi) MANAGER 2.1 will have access to city Delhi
                            -L3 (Mumbai) MANAGER 2.2 will have access to city Mumbai
                   -L2 (Malaysia) MANAGER 3 will have access to Country Malaysia
                              -L3 (Kuala Lampur)
                              -L3 (pahang)
             - L1 (Europe)
                                        u2026..
The requirement is that the CEO of the company should be able to see the entire set of data ( L0-L4).We have continent managers who can see that data specific to their continent, similarly at L3 Level the city manageru2019s should see the data only for their specific city.
In BI we have used analysis authorization based on hierarchies. We have created an authorization object say ZAUTH1 and have assigned the hierarchy L0 from RSECADMIN. Now, in Webi when we create a report a sample row comes as :
L0 Org Unit     L1 Org Unit     L2 Org Unit     L3 Org Unit     SALES Key Figure
Company ABC     Asia          India          Mumbai          1000
Now, we have MANAGER 2.2 who has only access to the data specific to his city (Mumbai). There is an Analysis Authorization object created for him ZAUTH2, by ONLY assigning the org unit hierarchy L3 (for Mumbai). When we run the bex report with the user MANAGER 2.2 u2013 it correctly displays the result and the user is only able to see the data for L3 Org Unit (Mumbai). However when you bring this data to Webi u2013 the report comes in the below format:
L0 Org Unit     L1 Org Unit     L2 Org Unit     L3 Org Unit     SALES Key Figure
Mumbai                                           1000
The L3 org unit has now got assigned to L0 Org unit , as this is the only org unit assigned to the MANAGER 2.2 user .
In such a case we are not able to write any generic formulae for the report. Is there a way to correct this issue? u2018Mumbaiu2019 should either get assigned to the L3 OrgUnit column is webi report , or is there a workaround that is possible ?
Thanks and Best Regards,
Vj

Hi Vijay,
The problem you speak of is known and comes from the fact that the hierachy is flattened in the process of delivering it to WebI. Therefore there is no real 'solution' to the problem, just some work-arounds you can think of...
1)
Create a report variable that starts looking at the lowest level, if it is empty check one up, and so on until you found what you were looking for (the lowest leaf available), which by definition must be there (even if it is top level).
Using similar logic you can also get a 'number of levels avaible' and so fill in the complete tree (duplicating the highest level).
This is difficult to explain when end users create their own reports, though you could provide a template report with these variables in there already.
2)
Extend the hierarchy with duplicates below the lowest level.
So i.e. L0 Company - L1 Continent - L2 Country - L3 City- L4 City - L5 City- L6 City.
This will give back on the four levels for top authorization
L0 Company - L1 Continent - L2 Country - L3 City
For authorization on Continent:
L0 Continent - L1 Country - L2 City- L3 City
For autorization City
L0 City- L1 City - L2 City- L3 City
So in all situations the fourth level, the L3 Object will hold the City level.
This you can then use in your report.
Hope this helps,
Marianne

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

MCTC , MC(E and MC+Q Report

Similar Messages

Maybe you are looking for