MCX Does Not Apply to Cross Realm User Accounts
Here's the situation:
Kerberos realm (REALM1) set up for user account access
AD created to allow authentication via REALM1 as well as AD (REALM2)
Mac OS workstations are bound to AD and local Mac OS Kerberos configurations on the clients allow authentication using user accounts defined in REALM1.
Users are able to log in to client workstations with no issues. Kerberos works fine within AD services. What we're attempting to do it get MCX policies to somehow apply when an AD account logs in to a Mac OS X workstation. We've been using either local MCX (dslocal) or OD (via Golden Triangle).
When a native AD account or local Mac OS user account logs in to Mac OS, policies are successfully applied. However, when a user account in our MIT Kerberos Realm logs in (REALM1), no policies are applied. It appears that policies exist when using mcxquery, although these policies are not apparent to the users that log in.
I also attempted to use mcxrefresh to get a better idea (with the -a switch for authentication), but it does not work since it bases authentication on REALM2 (AD) rather than REALM1 (MIT Kerberos). Since it cannot authenticate, no policies are refreshed and nothing applies.
I'm just wondering if anyone has seen this issue and if they managed to solve it, how they solved it. We're hoping to find a solution that does not require a CoD (Cylinder of Destiny) or LDAP schema changes.
Any info is appreciated.
Hi Shiju,
Before going further, we can run command gpresult/h report.html with administrative privileges to collect group policy result report to check how group policy settings are applied.
Besides, we can try to install the following hotfix to see if it helps.
Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows Server 2008, in Windows 7 or in Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/2738898?wa=wsignin1.0
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"
Hi,
A general question about hot fix installs.
I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
This is my system info, and below that is the results from attempting to install 95 HF's.
C:\TEMP>systeminfo
Host Name: MYHOST
OS Name: Microsoft Windows Server 2012 R2 Datacenter
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Windows User
Registered Organization:
Product ID: 00252-80025-36226-AA727
Original Install Date: 6/13/2014, 8:04:39 AM
System Boot Time: 3/16/2015, 2:34:45 PM
System Manufacturer: Dell Inc.
System Model: PowerEdge R720
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
[02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
BIOS Version: Dell Inc. 2.2.2, 1/16/2014
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-07:00) Mountain Time (US & Canada)
Total Physical Memory: 262,099 MB
Available Physical Memory: 249,337 MB
Virtual Memory: Max Size: 301,011 MB
Virtual Memory: Available: 288,015 MB
Virtual Memory: In Use: 12,996 MB
Page File Location(s): C:\pagefile.sys
Domain: mydomain.sgn
Logon Server: \\MYHOST
Hotfix(s): 25 Hotfix(s) Installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network Card(s): 6 NIC(s) Installed.
[01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: ISCSI
DHCP Enabled: No
IP address(es)
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: NIC3
Status: Hardware not present
[03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: MGMT
DHCP Enabled: No
IP address(es)
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 1_swport_VMRepwan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: NIC2
Status: Hardware not present
[06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 2_swport_VMOpswan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
Hyper-V Requirements: A hypervisor has been detected. Features required for
Hyper-V will not be displayed.
I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
Installing 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x64
Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
Thanks,
Dave
Hi Dave,
Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
Update is not applicable to your computer- but it is
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
MBean Attribute (Does not apply to application modules)
Can any one tell what this mean ?
MBean Attribute (Does not apply to application modules) :
is this means that it wont help for datasources for any J2EE application ????
Inactive Connection Timeout
The number of inactive seconds on a reserved connection before WebLogic Server reclaims the connection and releases it back into the connection pool.
You can use the Inactive Connection Timeout feature to reclaim leaked connections - connections that were not explicitly closed by the application. Note that this feature is not intended to be used in place of properly closing connections.
When set to 0, the feature is disabled.
MBean Attribute (Does not apply to application modules) :
JDBCConnectionPoolParamsBean.InactiveConnectionTimeoutSeconds
Minimum value: 0
Maximum value: 2147483647Yes!, they do not apply for any applications they are management interfaces, internal to weblogic.
Below is the brief information about it:
A managed bean (MBean) is a Java bean that provides a Java Management Extensions (JMX) interface. JMX is the J2EE solution for monitoring and managing resources on a network.
BEA WebLogic Server provides a set of MBeans that you can use to configure, monitor, and manage WebLogic Server resources through JMX. This reference document organizes WebLogic Server MBeans into the following categories:
MBeanServer Services, which serve as your entry point into navigating the MBean hierarchies. Some of these MBeans contain attributes and operations for managing changes to WebLogic Server configuration MBeans.
Configuration MBeans, which expose attributes and operations for configuring WebLogic Server resources.
Runtime MBeans, which provide information about the runtime state of its resources.
New MBeans, which have been added in the current release of WebLogic Server. These new MBeans are also listed in other categories in this document (for example, new runtime MBeans are also listed under the Runtime MBeans category).
Deprecated MBeans, which are deprecated in the current release of WebLogic Server. -
Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chrisyou can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers -
Clicking a Paragraph Style Does Not Apply Style to Text
I just switched from a PC to a brand new MacBook Pro (OSX Lion 10.7), and I bought InDesign CS5.5. I have been using CS4 on a PC for a couple of years and had no issues. For some reason, I cannot apply Paragraph Styles by placing my cursor in the text and clicking the Paragraph style. It highlights the clicked style for a moment, and then de-highlights all the styles, but does not apply any changes. The only way I can apply a Paragraph Style right now is by right clicking the style and selecting "Apply..." from the drop down menu. It's very puzzling. I was wondering if anyone had any experience with this. I also have Microsoft Office: Mac 2011 installed on the laptop if that makes a difference to anyone. Any help would be greatly appreciated, since I typeset and edit for my living, and this problem is slowing me down a bit.
Neither. Let's say I click into a paragraph. The current style will be highlighted. If I click on another style (or even attempt to re-apply the same style by clicking on it in the styles pane), it momentarily highlights the new style, then flashes a little bar underneath (like the one that shows up if I were to try to re-organize the styles list by dragging a style to a different pace in the styles list), then all the styles become unselected, but no changes have been applied to the paragraph in question. Very definitely not normal. It is almost as if the pane assumes that I am attempting to drag the style even when I am merely clicking on it. Very weird.
-
X does not apply to your selection because it is not inherited...
Hi
I'm trying to design a website using HTML and CSS. I have done the basic layout of the website using Div tags. However, the middle column of the website is showing up differently in Dreamweaver compared to on a browser.
I have researched the problem and found that it is caused by an error occuring on the middle column and the wrapper tag not applying to it: "x does not apply to your selection because it is not inherited. It is applied to an enclosing tag".
The code for my web page is here:
http://pastebin.com/DfXLL7Zb
This is my CSS styles code:
http://pastebin.com/81u476zE
Any help would be appreciated.
CheersThis tells me you have unbalanced opening and closing <div> tags somewhere in your document.
Use the validation tools to check your code.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
In the web forums, you can mark this discussion as answered.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?
Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.
-
Header business data does not apply to item
I have a document that i want to delete but the system won't allow me to do any changes due to error message we are receiving when entering this order "Header business data does not apply to item". Please help me reject the this order. By the way, the document is Debit Memo Request.
Hope to hear from you guys. Thanks in advance.Hi Riyaj,
To answer your questions:
1. There were no preceding docs existed.
2. I already put reason for rejection, however, there is a warning message that it cannot be deleted.
3. I am creating a Debit Memo Request. I want to do some changes to this particular document but Information Message "Header business data does not apply to item" keeps on appearing. -
Your computer's timezone does not appear to match your user setting of
I get this message on a top bar: "Your computer's timezone does not appear to match your user setting of (GMT- 06:00) Chicago. ''Click here'' to update your settings. Alternatively, ''hide'' this message.
My computer timezone is not Chicago. Why is Firefox giving me this error? Should I just hide it and ignore it? Well, there were a few error with a web app I am developing related to 1 hour off inputs. Something is wrong. Any guesses?Figured out the issue and can reproduce it; it has to do with a particular website: support.atlassian.com; one gets there if they have purchased any of the company's products.
I will let them know and let it go. Thanks :) -
New Secondary and Higher education Cess does not apply to all business!?
Hi,
I know that for New Secondary and Higher education Cess we need to apply OSS Note (1032554 - Secondary and Higher Education Cess on Income Tax) as per the new legal change in India, an additional surcharge has been introduced for purposes of the Union, to be called the #Secondary and Higher Education Cess on income-tax#, calculated at the rate of one per cent.
I think this new cess is applicable across all industries.But, got feed back from client (project) that it does not apply to their business (Import and Trading) and this new cess can be rejected during passing the budget as bill.
Could you let me know reasonable justification to implement this oss notes?
Thanks in advance
S.Hi,
Please go thru the following link specially the clause 129. May be helpful. It speaks of imports.
http://indiabudget.nic.in/ub2007-08/fb/bill6.pdf
Regards
A -
PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?
There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this? -
As some of you know apple released a SMC fan update to overcome the issues experienced with overworking processors.
I assumed it was doing something to overcome the BSOD which generally happens to me when I am playing WOW from as cold start.
Just for you information, this update does not apply to our models and as of yet still nothing coming.
I will be talking to a Mac person this afternoon.
Just wondering if people are still experiencing the BSOD on the 'better' NVIDIA cards.2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Verifying from caps:2011-06-13 11:25:29.289 PatcherApplication[1249:e07] Version does not match.
In English: You already have patched another Adobe product that uses an external shared library e.g. for Bridge or PDF handling an it has locked the installer database because an older version is not allowed to overwrite a newer version. Short of completely uninstalling everything, deletzing caps.db and then re-installing in correct order there is no way to resolve this, so if there is nothing crucial going on that would make the patch something to die for, simply leave everything as is...
Mylenium -
Tax code does not appear in any G/L account item Message FF753
Dear all,
During creating billing document, the system cannot post account document and display the follow error message:
FF753 Tax code does not appear in any G/L account item.
I tried to trace the program and found internal table t_bseg containing 3 entries:
1: Customer a/c: without tax code
2: GR clearing a/c: without tax code
3: Output tax a/c: contain tax code
Customer a/c and GR clearing a/c without tax code causes this error.
Anyone know how to solve it?
Thanks & B.RegardsHi,
In FS00 for GR/IR A/c in Control data, in Tax Category choose all tax types allowed (*) and also tick posting without tax allowed and try again.
Regards,
Sadashivan -
Error message "Tax code V1 does not appear in any G/L account item"
Hi,
I am getting the error message FF753- Tax code V1 does not appear in any G/L account item when I post a subsequent credit via miro.
It does not give the error with invoice or credit memo for the sames GL accounts.
History:
PO created
Goods receipt
Invoice posted and blocked as value greater than PO
Subsequent credit put on to correct the values in price query - error appears
I know if I go to FS02 and make the GL code * tax relevant it will remove the error but we dont want tax to go to this account as its a main inventory GL code.
Can anyone advise why it would appear on the subsequent credit but not on invoices or credits.
Also is there something I can set up to remove this issue apart from making the GL code tax relevant - it must not need it if the other postings work ok.
ThanksDoesnt matter that it works for credits and invoices with blank tax you still need to put * in GL code for subsequent credit etc postings
-
Tax code ZT does not appear in any G/L account item
Hi Gurus
Iam facing a proble while releasing the billing document to accounting. Following error is coming up
'Tax code ZT does not appear in any G/L account item'.
FTXP setting for the tax code appears find as it is tagged to the correct GL account, but somehow the posting is not happeing.
Can you please help me out with this as Iam stuck and the testing has stopped.
Thanks
RuchiHello,
please check the note 400766:
a) Consistency checks
In FI, the system checks whether there is a revenue line for each tax line. In the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the first requirement is not met, the system issues error FF753. In many cases, you can solve the problem with Note 112609
by adjusting the level number in the pricing procedure in such a way that the system copies the tax indicators correctly into the
revenue lines.
If the two tax conditions refer to one revenue condition, the requirement cannot be met if the taxes have different tax indicators. In this case, you must use the tax trigger condition in accordance with note 26646.
Best regards,
Ivano.
Maybe you are looking for
-
All, Appreciate your expertise on the above error message as per subject: No G/L account is assigned to account symbol 1 / 5.3.3 While posting securities - bond investment transaction via TBB1 (post flow), we got error messages for both Account Symbo
-
Hi When I trying take the Excel Report ..In the SAP BPC 5.1 version Its shows some error In the Description , But the Values are Coming Correctly For Example : Description Value #name! 5000 Regards Dayalan M
-
How do I get the songs on my mac to play through my home audio receiver , USING THE MAC?
The sales person at the apple store told me Apple TV would do that wirelessly. While I can play the songs on my computer through my home theater by using the screen on the TV that Apple TV creates, I want to be able to just go to my mac, select my p
-
Change character encoding from UTF-8 to EUC-KR
We are receiving data in UTF-8 in the querystring from a partner formatted as: %EA%B3%A0%EB%AF%BC%ED%95%98%EC%9E%90%21 Our site uses EUC-KR so using this text for search/display/etc is not possible. Does anyone know how we can convert this to the pro
-
Buttons not working correctly/consistently
I am working with a template that has 5 buttons on each slide Back, Next, Help, Pause, and Play The Help button is set up to Jump to Slide with the correct target, but for some reason it doesn't work. In fact, sometimes when I click Pause and then cl