MD06 report: by Product group

Hi,
I am using the functional module "MD_MRP_LIST_OVERVIEW" to get the data like MD06 for one of my report.
My problem is in functional module "MD_MRP_LIST_OVERVIEW" when I try to fetch the data based on "Product Group" (Selection by: Product group) system is giving me error "u2018No material transferredu2019 after executing of this functional module in SE37.
I am passing following entries in "Functional Module" (in ERM61R)
WERKS2 = PR01 (PLANT NAME)
PRGKZ = X
PRGRP = 100 (Product Group name)
ADBKZ = X
Could any one suggest if I am missing any entries in selection for functional module "MD_MRP_LIST_OVERVIEW ?

I doubt MD_MRP_LIST_OVERVIEW would be of much help in your report, as it does a CALL SCREEN, so it would leave your report. Are you sure you want to do that?
Instead I would suggest you use MD_MRP_LIST_API or BAPI_MATERIAL_MRP_LIST, read the materials from your product group & pass it to one of these FM's

Similar Messages

Production Report using Product groups.

Hi PP Gurus,
We want to develop one Production report that will include Product group.
We are using single level Product groups. Say PG= XYZ and PG members are A, B, C, & D. Since REM without RP and with daily confirmation being used we'll sort the results through MSEG table after passing MBLNR and MJHR from table MKPF using Movement types 131 (that will exclude Reversal quantity i.e through Movement type 132).
My requirement is to bring Product group in production report that will club above mentioned materials.
If anybody already worked on such requirement, please help me out.
Thanks & Regards,
Abu Arbab

Hi Rajesha,
Thanks for reply.
Since REM without RP I'm using no need of AFKO table.
Used logic as below:
Taking BLPK-BUDAT as input:
1. Select PGMI-PRGR, PGMI-WERKS to get PGMI-NRMIT.
PGMI-NRMIT = BLPK-MATNR to get BLPK-PRTNR.
BLPK-PRTNR = BLPP-PRTNR to get BLPP-MBLNR.
BLPP-MBLNR = MSEG-MBLNR, MSEG=MJHAR to get MSEG=ERFMG
Sort through MSEG-BWART = 131 negative 132.
2. Select PGMI-PRGRP, PGMI-WERKS to get PGMI-NRMIT.
PGMI-NRMIT = BLPK-MATNR to get BLPK-MENGE.
Sort through BLPK-VAART (B) negative BLPK-VAART (S); donu2019t select BLPK-VAART (BS).
Addition of BLPK-MATNR corresponding to BLPK-BUDAT entered.
Both logic are working.
Anyways thanks for help.
Kind Regards,
Abu Arbab

Report for list of Product groups

Hi,
I wanted to have complete list of all the product groups (created thro MC84) and its members in one report.
Is there any standard report avl in SAP.
Regards
Rishi

Hi,
Try using transactions - MC71, MC72 and MC73.
Revert back.
Rgds,
Shrenik

Profit center report picks production variance posting from prev periods

(This is a repost, from a ill-chosen forum)
Guys I am lost
I am running S_ALR_87013340 : profit center Plan Actual comparison report, on a group of profit centers: the total I got is different from the sum of the individual profit centers in the group: the difference being on my production variance account, and a sales posting that relates to the prior period
I had the same issue last month, with the discrep. only being my production variance account.
but I was expecting something of the sort: it was the first time we closed orders, and SAP closed all orders since the implementation, years earlier
What could cause this?
Thanks for your time, again
KR - Loï

Hi
The Production Variance account is usually not created as a Cost element.. Hence, the PC from the Mat Master is derived into this Line item.... Ideally, the PC from mat master gets copied into the Prod order also... If you change the PC in mat master later on, you can see a mismatch
Whats the situation in your case? The Prod Var account has PC or not or which PC does it have?
Br, Ajay M

How to map Product Group for the Materials in BW.

Hi All,
We have an requirement for one of the report called as Progress validation Report.
We have to craete thsi repotr which would pulll out Inventory value, Production Plan value, Total Lates, Current week deliveries and WIP for a quarter.
Cube whihc provides details about production plan has data by Material, plant and product group wise.
But rest of the cube from which we extract the key figures does not have data by Product grop wise.
Product group is been picked from PGMI table in R/3.
How I can related the materials which are in other cube to the respective Product group.
Material and the relevant prdoct group data doesnot flows in BW.
There is even a scenario where ahve seen a material falls under 2 product groups..
PLease guide as how i can realted already existing materials in the Cube to the product group.
Points will be assigned
Thanks & Regards
Vaishali Patil

Hi,
Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
If the maintinenece in master data is nopt possible then you got to populate the same in cube.
There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
There is one more way to have this but which is performance intensive.
You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
I hope it will help.
Thanks,
S

BW report by Material group

Hello BW Gurus,
I have a Quarterly report in BW, which i have to review each line and combine the sales for the same product . The initial report has 4000 products on the report. After I combine the products, there are 2238. I would like a way to streamline this process.
There are list of product that should be grouped as 1 for the purpose of this report. For Example see below
Material group   Group Name     Material                           Description
1          Audio                            6003707                           AMS KIT-
1          Audio                            6500786                           AMS KIT-
1          Audio                            6500284                           AMS W/O KIT
1          Audio                            6003437                           AMS W/O KIT-
Is there are any ways other can creating a hierarchy in BW? I know even if we create a hierarchy based on these material the users has to notify me when items are updated in the material master that affects the groupings..
Is there a solution for this?
Appreciate your time and response guys..
Regards Renny

Is there a reason you cannot create a navigational attribute for the product group, and use that instead of the material ? We do that in our company. In fact most aggregate material focused reporting uses it, so we've actually added it directly to our data models to avoid navigational attribute performance issues.

Costing Report summarized production cost by Finished Goods Material

Dear Expert,
I am looking for a report that can summarized the production cost in production order by Finished Goods Material Number.
or a report that can show me the cost components incurred related to a Finished Goods Material.
Can any expert enlighten me? please help.
Thanks a lot.

Hi
I would recommend the product drilldown reports in KKO0...
For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
Regards
Ajay M

Product groups in SOP

Hi
I have created a product group heirarcy in SOP. I want to view the the complete heirarchy in a report format. I do not want to use a graphical output like MC91/MC92. I need something like multi level BOM structure on Prod G heirarcy but not in a graphical format.
thanks

report MC71 with displaly option 1 and 2 it will give the report like Cs11/cs12

Standard Vs Actual Cost report for Production Order

Hi Expert,
I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
Please suggest standard report if available or FS for creating Z Report.
Regards,
Pranav

Hi Pranav
There are Standard reports
Option 1
You can use Product Drilldown reports in KKO0
For this:-
a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
b. Run KKRV to collect data and then use KKO0 reports
I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
Option 2
You can use Summarization Hierarchy KKBC_HOE
For this
a. Set up Summ Hierarchy in KKR0.
b. Run KKRC
c. Run KKBC_HOE report
Br Ajay M

Material Group,Product Group

Hi ,
Can any one explain what is meant by Material Group, Product Group. Where is it used. What is the difference between
Material and Product Group. Do we need to have any prequisites for creating Product Group with Tcode MC84?.
Thanks in advance

Aditya,
Material Group:
This is basically a field in Material master Basic data1. This field is available in most of the Purchasing Reporting transactions and you can run reports based on them. Material Group is also used as a reference when creating Purchase Inforecord without any material number reference.
Product Group:
Product Group is a material master of type "PROD". This type of material master can only be used for planning purpose, you can assign finished materials(FERT) as members to them. Example: If you are manufacturing a product which goes in for several type of packings then you create a product group and assign the individual finished product material numbers as members, here we also define the proportional factors for aggregation and disaggregation.
Hope this helps your understanding.
Regards,
Prasobh

Product group selection on screen

Hi All
I use PRGRP from PGMI in a report program
PRGRP is used on the selection screen to find a product group
On my selection screen ,when I use the list option,it brings up selections on material numbers and description
How can I change it to just list all product groups for the user to select?
Many thks
Gerhard

I beleave you can use the Search help MAT1L. (Material by material group)
or one of these standard:
MAT0M     Material Number/Material Description
MAT1A     Material by old material number
MAT1B     Material by bill of material
MAT1C     Material transferred from CAD system
MAT1E     Competitive product by competitor
MAT1F     Production resources/tools by description/PRT grouping
MAT1H     Sales material by general product hierarchy
MAT1I     Material by vendor's material number
MAT1J     Material by material category
MAT1K     Materials for class
MAT1L     Material by material group
MAT1N     Material by EAN (International Article Number)
MAT1O     Materials by several classes
MAT1P     Material by product hierarchy
MAT1R     Material by task list
MAT1S     Sales material by description
MAT1T     Material by material type
MAT1V     Material by Supply Area
MAT1W     Plant material by description

Aggregate planning to support Product Group/Material/SKU 3-level ?

Hello Everyone,
For the AFS and APO integration, we want to have planning run on Product group, Material and SKU.
I know the standard AFS and APO integration will support aggregate planning on Material and SKU level. Will it be able to run SNP aggregate planning on Product group/Material level?
Thanks,
Bin

Dear Bin thanks for clarifying
You can try the below two options if its only for a reporting purpose and no capacity planning has to happen at that level.
1. THRU ABAP: Maintian the Product group in the Product attribute field in the Extra tab of the product master and then a Report can be developed through ABAP which can pick the capacity available to consumed by different product groups. As it will already have the product wise capacity consumed it will be easy to map it for the ABAP person using Product group info. From product attribute tab.
OR
2. IN the MPOS of your linked planning area maintain in the char attributes the Product attribute field 1.
By this when you load the capacity view for a particular you can detail all it Product attribute wise too like product wise.
As you will have maintained Product attribute as Product groups you will have the capacity consumed by each product group.
I havent tried 2nd option myself but i am certain to quite an extent it will work.
Regards
VIrender

How to create a datalink between 2 Cross Product Groups?

hi friends,
I am working on multi-query Matrix reports in Reports 6, actually i want to make a sum of two columns which are in different cross product groups, i cannot directly refer to both the columns as reports runtime gives me a frequency error & moreover iam unable to link both the cross product groups also !!
iam totally in a fix !!can anyone help me pls.!!
any help will be appreciated
thanx in advance.
best regards,
jitendar :-)
null

Thanks for Your answer, but main problem is what relation type use to create link between 2 common objects.
Your solution (use class CL_BINARY_RELATION) returns the same error message, because this class is used in FM BINARY_RELATION_CREATE.
In the end I found that solution is to use as relationtype (ORBRELTYP-RELTYPE = 'ASGN').
    CALL FUNCTION 'BINARY_RELATION_CREATE'
      EXPORTING
        obj_rolea      = obj_a
        obj_roleb      = obj_b
        relationtype   = 'ASGN'
      EXCEPTIONS
        no_model       = 1
        internal_error = 2
        unknown        = 3
        OTHERS         = 4.
It seems to work and on both objects (A and B) I can see link (relation).
Best regards,
MD

Error while creating product group

hi,
i am getting error while creating Product group.
Required parameters missing when calling up module
Message no. M3749
Please suggest me.. how to cop this
Regards,
amit

Dear Brahmankar,
I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
Please suggest me , this process is correct or it will create any problem in any module .
Thanks & Regards
Prabhakar

Product Group capacity can not be seen in MF50 output

Dear All,
I can not see the product group in 'total capacity' subscreen in output of planning table MF50.
In MF50 the input parameter i am entering is product group and plant.
In the scheduling tab of input parameters detailed scheduling and capacity planning is tick.
For some product groups i can see in output as "Product Groups / Total Capacity" and also in the rows below it shows "Prod.Grp XYZ" then requirement and available quantity rows. After which the production line rows follows.
For some product groups when enter in initial selection screen of MF50 with same input parameters in output i do not see Product group but i can see "Total Capacity Data" and then the rows starts with production lines. But no information on capacity of product group.
The setup of all product group is same and are created with MM01.
Regards,
Vero.

Hi Rupesh,
Thanks for reply.
In 'Control Tab' i am not selecting any parameter. So in output i can see all materials in 'Material Data' section which are included in product group irrespective of requirements.
I have issue in upper half section of 'Total Capacity Data'. I can see the different production line rows with Requirement / Available rows with capacity values in each period. Unit is %.
But i do not see 1st row for Product group row with 2 subsequent rows (requirement / available) with unit KG.
I can see these rows only for some product groups but not for all.
For the product groups for which i do not see these rows have capacity requirement in selected periods which can be seen in same output in production lines rows. (where selection in input screen is product group and plant)
Regards,
Vero

MD06 report: by Product group

Similar Messages

Maybe you are looking for