MDM_CLNT_EXTR (No data was found)

Hello,
We need to extract all Customer Master Data from ERP 2005 using MDM_CLNT_EXTR.
I encounter with the following error:
- The job terminates with error message B1 041 (Table MASTER_IDOC_DATA is empty).
or
- The job terminates with message MDMXFW 012 (No data was found).
I have read the 997213 note and the problem is that I have not set the selection restrictions correctly. The note shows the following solution:
If you want to extract all of the master data without any restrictions, specify a relevant number interval for the master data object (for example, vendor number from 0000000000 to ZZZZZZZZZZ - for all vendors). Note that you have to specify numeric keys with leading zeros.
The field names that I specify are:
BEGRU, GFORM, KTOKD, KUNNR, LAND1, LOEVM, NAME1, ORT01, SORT01, SPERR, SPRAS, SPART, VKORG, VTWEG.
and my questions are:
- Which of this fields specify the customer number to fill in?
- Nowadays, If I use LAND1 with ES value, The job terminates with message MDMXFW 012 (No data was found).Should I delete the rest of the fields (BEGRU, GFORM..etc) before to execute?
- All customer data were previously imported through VC01 transaction. Is it correct? Maybe this transaction doesn't fill the same table that the MDM_CLNT_EXTR transaction execute.
Any idea will be very helpful
Thanks a lot
Marta.

Hello Marta,
I just happened to look at your questions, Will try to answer few of them(infact what we did in order to extract Master Data from R/3)
1)Which of this fields specify the customer number to fill in?
We used only KUNNR
2) All customer data were previously imported through VC01 transaction. Is it correct? Maybe this transaction doesn't fill the same table that the MDM_CLNT_EXTR transaction execute.
Am not sure of VC01, but the best way to initially extract all the data is using MDM_CLNT_EXTR.
Suggestions:
1) Try to run the job in background.
2) Dont rerun the extractor if you have no data, because what we experienced is "Running the same job multiple times threw us MDMXFW 012 (No data was found)
This is my 2 cent Hopefully this helps.
-Sharan Alemane

Similar Messages

Error: No valid complaint data was found in this sales area

Hi All,
I am getting below error while delta or request download of customer.
No valid complaint data was found in this sales area
Message no. CRM_SPL_BUPA_FRG0010203
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
Error case:
ECC-->Customer(Sold to) extended to a sales area and saved.
     CRM-->Business partner gets updated in the CRM properly.
ECC--> Deletion flag for same customer and same sales area is set. (Deletion flag - "Selected sales area").
     CRM-->Business partner gets updated in the CRM properly and is not shown as extended to the sales area via BP t code.
ECC-->Deletion flag is removed for the customer.
     CRM--> BDOC fails to update the Partner and goes in error.
Problem comes when deletion flag is removed in ECC.
Any help would be highly appreciated.
Thanks in advance.
-Ram

Hi Ram,
Hope you have not make any field mandatory in the Complaint tab in the sales area section in the BP.
When you are removing the deletion flag please check if any entry is mandatory in the Complaint tab.
Hope this will be useful
Thanks and Regards
DJ

No data was found that fulfils the selection criteria in T Code KEAT

Dear All
I am running the transaction code KEAT in Production and system is giving message
"No data was found that fulfils the selection criteria" and there are no values for COPA reconciliation
If i run the same T code in Quality system shows me the various rows and columns for
COPA Values SD Values FI Values and PCA values along with DELTA COPA/SD/FI/PCA
Can any one tell me the reason why i am not able to get this COPA reconciliation in production
Your help will be highly valuable for me.
Bilal

hi
check for the authorization profile of yours in production

Hard Drive upgrade problem (No applicable update data was found) system update v2.53

go here with full detailed and working steps:
http://www.problogbooster.com/2014/01/no-applicable-update-data-was-found-ps3.html

I tired it all , this what worked for me : FIRST turn ps3 in to safe mode:Step 1: With the PS3 on turn off the power by holding the power button on the front of the unit till the power light is red.
Step 2:
1. Touch and hold the Power button, you will hear the first beep, meaning the PLAYSTATION 3 is powering on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off.
Step 3:
1. Touch and hold the Power button, you will hear the first beep, again for the PS3 to power on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, "Connect the controller using a USB cable and then press the PS button."
4. Connect a USB cable to the controller and the PS3 and press the PS button to enter Safe Mode.
5. Then you will see the Safe Mode menu. Next : download ps3 update on playstion website , and put into usb stick: make sure its lile this : PS3/UPDATE/XXXXXXXX XXXXXXXXX is the file you downloaded, and ps3 and update need to be caps, after safe mode out usb for controller in first ONLY, do not put usb stick with update in yet, then after in safe mode go restore setting, this will take you back to the page where you need to put your ps3 controller on again, then it will ask you for update, THEN you put usb stick in, and folow on screen. i tired everything, this way it worked for me, safe mode then update, make sure usb is phat32 like always,

No data was found ... in Outgoing Senders

Hi,
Our ironports work as a relayhosts for local hosts and only send emails to the outside world.
We've got configured only one listener of type = private. Almost all emails hits "Relayed" flow policy.
We've many hosts and we send emails from many domains eg.
from: [email protected] or
from: [email protected] or
from: [email protected] or
from: [email protected]
from: [email protected]
I'd like to see how many emails are being sent from a given domain. As you can see from attached screenshots there are
plenty emails sent but there are no data in Outgoing Senders stats page.
Why is that ? What am I missing here ?
Thanks for any help.
screens attached ...

That shows you the domains of the sending hosts, not the envelope sender domains. If you select IP Addresses you will see that it shows the IPs of the hosts you are getting mail from.
You will not see any outgoing domains when the appliance can't do a reverse lookup on the IP. This can happen for several reasons.
You could use Message Tracking to count the number of items from a particular domain but that has a maximum limit of 1000. If it were me I would download the mail_logs and directly count the messages using grep or something similar.

Exporting Slide Show- Invalid media was found in the movie

I have been trying all day to send a photo album to Itunes to put on my Ipod. Every time I try I eventually get the message that Invalid Media Data was found in the movie. What does this mean and how to I fix this.

I am having the same problem. I am exporting a slide show (450 pics) and after A LONG TIME (probably double the previous time it took in the previous iPhoto), I get an error message that says 'Invalid Media Data was found in the Movie'. I also thought it might be protected mp3s (I have music with the slideshow) and I found one 'possible' problem song file, but after I corrected it, I get the same error.
I have noticed that iPhoto 09 gives an import error for some types of .jpeg files (in particular those imported after scanning using the Image Capture program). I also noticed as I was editing the slide show that there are 5-6 pictures that come up black when you flip thru them in the viewer/editor. They show up in the scan, but do not in the viewer.
I have run the slideshow in 'play' mode several times without issue. I urgently need this file for tomorrow. If anyone has any suggestions on workarounds today, I would appreciate it.
Mark

"Your meeting was found to be out of date and has been automatically updated."

Hello, one of our users is stating that when they make changes to meeting dates and/or times, a few minutes to a day later, the changes revert to the original date and/or time. Additionally, they will occasional also receive an email stating "Your meeting
was found to be out of date and has been automatically updated."
This customer is on a Win7 client and running Outlook 2007. Both the OS and Office/Outlook are completely patched as of 08/12/2014. There are also a couple of iOS devices that access the Exchange account and both are running the latest version of iOS according
to the customer.
The customer states that this behavior began immediately following our migration from Exchange 2007 to 2013 a couple of months back. I am not able to see any reason for this at the server level. We also do not currently have any other users complaining of
the same issue. I am unable to replicate the issue using my account. I suspect that it is isolated to this single user at this point.
We are running Exchange v15, build 847.32.
Has anyone experienced the same? Thanks in advance for any input.

Hi,
I noticed that there are some third-party devices used to sync and manage Exchange calendar. Usually, some issues may be caused by some devices used for Exchange ActiveSync service. We can try to disable the devices and check whether the issue persists.
Here is a KB descripted Current issues with Microsoft Exchange ActiveSync and third-party devices:
http://support.microsoft.com/kb/2563324
If the issue is not caused by any third-party programs, please check the time zone from Outlook client, local machine, third-party devices and Outlook Web App. Please also change a computer then send test meeting updates to check if the issue continues.
Regards,
Winnie Liang
TechNet Community Support

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
 [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
 An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
 An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
 from Conference_C C
 where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Dump-A newer version of data type "ZMNFLOCK" was found than one required

Hi,
I am getting dump in program when there is a select query on ZMNFLOCK table.
Error analsys is given as
Error analysis
The data type "ZMNFLOCK" was loaded from the database during the program run.
    However, a type of a newer version than the one requried was found here.
What could be the problem? my BASIS person says this is somewhere related to ABAP.
should i Adjust & Activate database by going to SE14 for ZMNFLOCK table.
Also noted that error is random in nature and its not coming everytime.

Hi,
There could be an issue with in the table, As Dataelement or domain related to any field in table may have changed, And that field is not getting used aal the time, That's why Dump is coming randomly.
The best possible solution is to Activate and adjust database table through SE14, This will update table with all the updated versions.
Thanks
Saurabh Siwach

Data type /BIC/CCABIS_COST was found in a newer version

Hai,
I am uploading Flat file (only two fields Act_period & account).
   In the schdule of preview, I am getting the following message "Error 8 when compiling the upload program: row 197, message: Data type /BIC/CCABIS_COST was found in a newer version.
My excel sheet:
Actual, Period     Account
1371                  DEP EXP- BLDG IMPR(P
1755                  DEP EXP- OFFICE EQUI
154,027.10             DEP EXP- COMP HARD
168,259.05             DEP EXP- COMP SOFT
10                 Spare Parts (P)
10                 Mis.Operat.Exp (P)
129,093.87            Basic Salary -(P)
10                 Basic Salary -(P)
10                Overtime Wages-(P)
10               Casual Salary-Skilled-(P)
10              Casual Salaries Unskilled-(P)
5,64484.99               Housing All/House Rent-(P)
5,42443.78               Vacation Airticket-(P)
5,54466.08               Vacation Salary-(P)
6,35574.34               Employee Indemnity-(P)
0               Relocation-Production
0              Medical-(P)
2,97550.00              Transport Allowance-(P)
1,522.53             GOSI-(P)
Any tips to solve this porblem?
****Points will be given************
With Regards,Jaheer.

Simply restart AWB using /NRSA1 will do the magic..
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
else try the following :
In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
u can try the following :
1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should clean the eleted objects.
2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed
else try this :
delete Infosource - Source system assignment (with PSA tables etc.
- activate Infosource communication structure
- assign source system
- create infopackage
- load data again

A newer version of data type BBP_PDS_HSS_IC was found than one required

Hi,
When I create a SC, it is automatically approved but the PO is not created.
If I check TRX SM58 I get the message:
"A newer version of data type BBP_PDS_HSS_IC was found than one required"
Any ideas?
Carlos Durazo

Hi
Which SRM version are you using ?
By an chance have you created any new fields in the standard structure
'BBP_PDS_HSS_IC' using SE11 Transaction in SRM system. Please confirm the same by taking help of ABAP person here. Seems to be like the structure is not Activated completed.
Related SAP OSS Notes ->
Note 758067 - SRM 4.0: Change documents of new sets (DynAttr, Weight)
Note 820201 - Document changes for attachments does not work
Hinweis 691880 - Changes in tolerances not displayed in purchase order
Note 1018714 - Change documents: Time stamp of the application server
Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
Do let me know.
Regards
- Atul

Could not automatically scale X because monitoring data was not found

I have never been able to get Auto-Scaling by CPU to work. I have created new cloud services, waited days before setting it up, but this warning always gets generated when it tries to scale:
Could not automatically scale XXX because monitoring data was not found
The cpu data displays on the monitoring tab and the auto scale configuration screen.

Hi wikek,
Thanks for your posting!
Is your question similar with this post(http://stackoverflow.com/q/19730570 )? I am not sure but it is possible that the cloud service and VM has had maintainence on yesterday, please see this comment form
Azure dashboard (http://azure.microsoft.com/en-us/status/#history ):
Starting at 2nd Sep, 22:18 PM UTC to 3rd Sep, 03:45 AM UTC, a very limited subset of customers using Cloud Services and Virtual Machines in West US may have experienced intermittent errors or timeouts when attempting to access services. The issue was
intermittent, and customers would likely have been successful when retrying a request. Engineers have validated that full service availability has been restored to our West US customers. This incident is now mitigated.
It could leverage the VM or Cloud service performances. And I suggest you can contact with azure support to resolve this issue.
http://www.windowsazure.com/en-us/support/contact/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: A newer version of data type was found than one required

Hi Experts,
we made a changes to a table and then transported the table to the quality system. But a program which is referring to this table, results in dump with the below error message.
Error Message>>>>>>>>>>" A newer version of data type <TABLE> was found than one required "
The issue occures inspite of
1. re-activated the table and send to quality system
2. Re-activated the program
3. Activated and adjusted database in SE14.
Please let me know the correction to be taken to resolve the issue.
Regards
Suresh Kumar

This happens when you modify your new data element, domain while another program is currently using it.
Simply get out completely of the program, re activate the program, reactivate the table. You might need to run se14 to convert the database table but this does not happen frequently. Try first to reactivate the program
Dean
Edited by: Dean Ton on Mar 8, 2012 9:54 PM
Edited by: Dean Ton on Mar 8, 2012 9:56 PM

No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinder

I don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

MDM_CLNT_EXTR (No data was found)

Similar Messages

Maybe you are looking for