MDM-ECC Integration

Hi,
I need a step by step guide displaying MDM-ECC Integartion.
One way is to use MATMAS IDOC which XI turns into XML and MDM Import Server
inbound port picks up and send to MDM. Similarly the Syndication Server responds.
Now, I need to know whether any alternative approach.
MDM ABAP API is to access MDM through Object Oriented ABAP.
Regards
Kaushik Banerjee

Hi Kaushik,
Integration between MDM and ECC system can happen in one of the two ways :
- File Adapter mechanism
- ABAP Api mechansim
In the file adpater way as you already are aware of we use XI in the landscape for exchanging data between ECC and MDM in the form of Idocs and XML as the MDM systema dn R/3 system cannot talk to each other directly.
One is an ABAP based system and one is a C++ designed windows based system.So we use PI/XI for master data transfer and monitoring.
To know more on this method kindly refer the below link:
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
The second method is that of using the ABAP Api.using this method the ABAP system can directly connect to the MDM system using the API's and perform the data management activities from within ECC system.
To know more on this method kindly refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601ddb01-e5c8-2910-d981-b190b51fca44
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=3478
The methods of integartion used so far with MDM and ECC are the two mentioned above.
but using them you can build many scenrios like:
- Extract all data from ECC and cleanse it in MDM
- Create all master data centrally in MDM and syndicate to R/3
- Create only Global data in MDM and send the data to R/3 to extent to local data and obtain the entire master record then in MDM.
Hope It Helped
Thanks & Regards
Simona Pinto
Besides these scenario you can also integrate MDM with ABAP using the front end system like EP wherein you access the ABAP transcation using the transactional Iviews. etc.

Similar Messages

SRM, MDM, ECC integration for central contract management.

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

SRM -- MDM -- ECC integration for central contract management for SRM 7.0

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

ECC integration with Crystal report 2008

Hello,
If some one have guide of ECC integration with Crystal report 2008 ? Please share me I need to integrate ECC to crystal 2008 integration.
Regards,
Sankar.G
Basis Cosultant

Do not cross post.
Read the "Rules of Engagement"
Regards
Juan

Enterprise Portal - MDM - LDAP integration

We are succesfully able to integrate Portal to MDM with a trusted connection and with portal users existing in LDAP and mdm users existing in MDM console.
We also successfully integrated MDM with LDAP so that we dont have to store users in console, but manage them in LDAP. But once we did the LDAP integration, portal to MDM connection was lost saying mdm user details could not be retrieved.
Has anybody faced this issue? what key steps to taken care during MDM-LDAP integration.

Hi goerge,
When ever we integrate MDM with LDAP, we need to make a setting in MDS.ini file.
Please check the "User Identifier" setting in MDS.ini file.
Typically this should be The name of the LDAP id field which will match the value the user provides as the Username at logon.
Make the entry in MDS.ini like User Identifier = cn or SamAccountName.
If that is done, please verify other parameters corresponding to LDAP in MDS.ini as per the table 91 in Page no 291 in MDM Console referece guide.
Or refer to the SAP note 1635338 for reference which is pointing to same issue.
This should solve your problem.
Regards,
Sravan

MDM-BOBJ integration for initial load....

I have attended some demos for the MDM-BOBJ integration that dealt with the on-going creation and maintenance of master data but my question is how this is used for the initial load and enrichment for any master data.
When we used D&B for enrichment, data will be enriched/Cleansed before the initial load then after loading the data to MDM it will be de-duplicated based on the DUNS number .
How the initial load and de-duplication is handled in MDM-BOBJ integration?. For example, I have 100 thousand records and would like to enrich/Cleanse it before loading to MDM OR after loading to MDM.
Any help will be appreciated.

Mike,
Yes, BOBJ dataservices has been extensively used to handle the scenario which you described here.
There is a user guide to explain about the BOBJ-MDM scenarion under Integration of SAP Components with MDM.
[BOBJ DS for Data Enrichment |https://websmp208.sap-ag.de/installMDM71]
hope this helps for Jump start.
thanks
Alexander

Can I work backward from APO CIF function module to ECC Integration Model

On our APO box, I have activated the "new-style" BAdI which is called by the CIF function module /SAPAPO/CIF_TLANE_INBOUND:
CALL BADI lr_ref_cif_enhance->inbound_tlane
How can I find out what the business analysts have to do in their ECC Integration Model
to make sure that the CIF_TLANE_INBOUND function module is called when the Integration Model is activated (so that the BAdI will also fire)?.
Our current Integration Model does fire the BAdI /SAPAPO/IF_EX_TR_TRANSFER , but not the "enhance inbound tlane" BAdI called by CIF_TLANE_INBOUND.
So ...to restate the question:
How do I figure out what I have to tell the business analysts to do in their Integration Model to make sure that CIF_TLANE_INBOUND is called when the model is actrivated ???

Hi David,
I was away in a long meeting and just came back. A quick check in another R/3 (Enterprise) system showed the following:
There is no FM in the R/3 Enterprise box as CIF_TLANE_SEND and in APO (SCM4.1)
/SAPAPO/CIF_TLANE_INBOUND. This is not surprising esp when I check the other system versions based on which I did the initial research. It was ECC 6.0 with Enterprise Extension DFPS switched on (checked SWF5) and the APO system SCM 5.0.
Lucky me I checked the internal Sandbox systems instead of my client systems otherwise I would have posted there is no FM CIF_TLANE_SEND
Forget the SD Scheduling Agreement object I mentioned in the previous reply. That master data object will not trigger FM CIF_TLANE_SEND. I found the correct FM for it CIF_SDLS_SEND on R/3 side and /SAPAPO/CIF_TPSCO_INBOUND on the APO side.
So you have to necessarily use the BADI or User Exit enhancements for TPSRC and NOT TLANE.
In any case if its a Contract or Scheduling Agreement or Purchasing Inforecord master in R/3 (or ECC any version) then TPSRC is the FM used to create External Procurement Relationships (txn /SAPAPO/PWBSRC1) in APO during CIF transfer. Also a corresponding Transportation Lane (txn /SAPAPO/SCC_TL1) gets created when the Procurement Relationship is added in APO. Otherwise you can always manually create a transportation lane in APO which is an important master data for External Procurement Order / Requisition creation in APO.
Hope this helps. I am logging off for today - so no more further digging. But thanks to you I discovered another small "blackbox" of SAP. Will blog on this some time later - till then you can take a look at the [CIF Wiki|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] page.
Best regards,
Somnath

MDM LDAP Integration

Hi,
We have integrated MDM with LDAP, by creating LDAP Roles & mapping them with MDM Roles. We are having log entries for Admin user for all repositories after every 10 milli-seconds. Any idea why these entries, how to stop this?
2010-03-03T22:56:22.978,1096 ,23,"Log-on failure: LDAP Error, userName = Admin User not found",MDSPublicServer@AuthorizeSessionForRepository,CatMgrDatabase.cpp,1866,,,1155,Admin,REPO 1<dbserver\DEV [SQL_Server]>,,,
2010-03-03T22:56:22.994,1096 ,14,"GetUserInfo: Unspecified Exit Point",Horizontal@LDAP,<file not specified>,,GetUserInfo,,1155,Admin,REPO1 <dbserver\DEV [SQL_Server]>,End,,
Thanks,
Ketan

Ketan,
Please refer this document for MDM LDAP Integration Process Step by Step,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8054d5e1-1000-2c10-a09e-a168973f74b5?quicklink=index&overridelayout=true
Also refer SAP Notes, Note 1279785 - LDAP users connect to MDM with Fallback setting
 Note 1096642 - Check-in/out does not work with LDAP user authentication
Hope it helps...
Thanks and Regards,
Mandeep Saini

MDM BI Integration

Hi All,
I am doing the MDM BI integration using ABAP API.
In the info object , I gave the Master Data Read Class ( ZCL_RSMD_RS_GENERIC_TABLE) which I actually copied from the standard class CL_RSMD_RS_GENERIC_TABLE.
After that I changed the structure name to 'ZMDM_ST' in the method IF_RSMD_RS_GENERIC~GET_STRUCTURE_NAME.( it was RSMD_RS_S_GENTABLE).
'ZMDM_ST' structure contains the fileds OBJECT_NAME,TABLE and QUER_FIELD.
Also I changed the methods where the old structure refered to the new structure name 'ZMDM_ST'.
After doing all these things, when I click the Master Data Read Class Parameters button which is in the info object, its giving the different input filed from the sturcture 'RSMD_RS_S_GENTABLE'. Not from the structure 'ZMDM_ST' .
Please help me....
Regards,
Nikhil

Hi Nikhil,
Kindly follow the below links to understand MDM integration with BI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b01e4269-f744-2b10-929b-fa7b49aac540
https://forums.sdn.sap.com/click.jspa?searchID=15135439&messageID=5534149
BI Integration
Re: MDM-BI Integration - connectivity issue
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03b4c55-e63d-2b10-e2a2-f8310c8e795f
Hope It Helped,
Thanks & Regards
Simona Pinto

BI7.0 and MDM(sp06) Integration

Hi,
I am working on BI7 and MDM(sp06) integration scenario through ABAP APIs. For this scenario which support packs and API's need to install in BI server and where can I found complete information about integration..... plzz provide some documentation and some links which can guide me..
Thanx in Advance.
Rgds,
Ram

Hi Reddy,
Go to [http://service.sap.com/swdc] --> Support packages and patches --> Entry by application group --> SAP NetWeaver --> SAP MDM
You will get JAVA APIs and Portal Content there.
go through this link...
[How to define portal system to access MDM server;
For a pretty good introduction to MDM workflow, see the following article: [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9180cbaf-0801-0010-f882-f2af6dc975d0.]
[MDM Workflow - Please help a student!;
regards,
NR

BW powered by HANA with ECC integration

Dear Experts,
Kindly help me for step by step BW 7.4 Powerd HANA and ECC system integration & configuration.
Regards,
Sri.

Dear Dinesh,
Thanks for Quick reply.
Same only BW and ECC integration, But now SAP BW 7.4 not dual stack, ABAP and JAVA stacks are separate..many changes is there. Do you have any idea about same host, same SID installation for BW 7.4 ABAP stack & BW 7.4 Java stack on HANA Database.
SAP BW 7.4 Java to ECC integration is some wizard will be there.
the same way in ABAP stack any transaction or wizard is there or not.
Kindly help for this.
Regards,
Srini

MDM BW Integration

Hi Everybody
We are doing a MDM-BW integration. Here we got the file extracted from BW of type (.csv). Now we would like to take up the file in MDM. There were 2 files of type csv.
1. The data structure(.csv)
2. the data(.csv)
i created an inbound port and and i had put the data(.csv) in to that directory
Now when i tried to import, i selected the port and clicked on finish.
I got an error messege which says
"Logon Error : Data definition invalid for port 'port name'
could some one help me on this!
Thanks in advance.
Vinod

Hi Vinod,
As you are importing .csv file then follow these steps:
I. Set up ODBC for *.txt or *.csv files
1. Open Data Sources (ODBC) interface:
Start> Settings> Control Panel--> Administrative Tools -->Data Sources (ODBC).
2. Select System DSN Tab in Data Sources (ODBC) interface.
3. Click on [Add]. Select the Microsoft Text Driver. Click Finish.
4. Write a Data Source Name
5. Uncheck Use Current Directory to enable the [Select Directory] button.
6. Click on [Select directory] to determine the source directory.
7. Select the source file.
8. Click [OK] and return to the ODBC Text Setup screen.
9. Click [OK].
10. Return to the ODBC Data Source Administrator dialog and click [OK].
II. Importing from Flat file
1. Run MDM Import Manager.
2. Select ODBC from the Type drop-down field of the Connect To Source dialog.
3. Enter the DSN name from the Setup ODBC Connection dialog above.
4. Select the file name with extension (.csv or .txt) in the Tables panel of MDM Import Manager and the file content in the Records panel.
5. Perform the mapping and save it.
6. Specify this map name at the inbound port.
Note: The Current Directory should be the path where you drop that .csv file.
Mark Helpful Answers
Thanks and Regards,
 Sagar Sonje
null

Standard PML Message XSD Import in PI Gives Error ::AII -PI-ECC Integration

Hi Experts,
We are currently integrating the AII system with ECC using PI as a middleware. We are trying to post one type of message in AII which will check the tag event in that message and do the required action in AII.
Now point is AII team is expecting a PML mesage as below -
<?xml version="1.0" encoding="utf-8" ?>
- <pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 ./PML/SchemaFiles/Interchange/PMLCore.xsd">
<pmluid:ID xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" />
- <pmlcore:Observation>
<pmlcore:DateTime>2012-02-08T16:41:26.760</pmlcore:DateTime>
<pmlcore:Command>TAG_DECOM_BATCH</pmlcore:Command>
- <pmlcore:Data>
- <pmlcore:XML>
<PRODUCT>TRN_PROD_13</PRODUCT>
<BATCH_ID>ATRN_PROD13B</BATCH_ID>
<LogicalDeviceID>DG_AMBOISE_LINE_1</LogicalDeviceID>
</pmlcore:XML>
</pmlcore:Data>
</pmlcore:Observation>
</pmlcore:Sensor>
And they have also provided the standard PML message xsd to us but when we are importing it in to XI it is giving the below error -
Change list activated; note the following information
Check result for External Definition: PML | urn:sugata_PI_LFTP: Document check found errors
Cause: Loaded document contains incorrect XSD definition
Name of '/schema/element("XML")' starts with 'xml'
as we can see in the above XML there is a tag called <pmlcore:XML> if we change this to something like <pmlcore:ABC>
it is imported successfully and we can see the message structure in the XSD also.
As PML XSDs are standard so the AII team is also not changing the same as mentioned above.
Please advise how can we import this XSD in PI with tag name XML?
Another question, which is very confusing to us - is PI able to send PML message as mentioned above? or PI will send a simple XML as below -
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Batch_DECOMM xmlns:ns0="http://pfizer.com/serialization/batch_expiration">
- <Observation>
<DateTime>2012/02/08</DateTime>
<Command>TAG_DECOM_BATCH</Command>
- <Data>
- <XML>
<PRODUCT>F000000211</PRODUCT>
<BATCH_ID>00000TESTAII001</BATCH_ID>
<DOCUMENT_NO>0000000004811027</DOCUMENT_NO>
<LogicalDeviceID>DG_GLOBAL</LogicalDeviceID>
</XML>
</Data>
</Observation>
</ns0:MT_Batch_DECOMM>
and AII will convert it to PML message using some PML engine or PML converter in AII?
Request your urgent help in this regard. Any help will be appreciated and rewarded.
The standard XSDs we are using are - PMLCore.xsd and Identifier.xsd , first one is referring the second one.
Thanks
Sugata B Majumder

Hi Mark,
Thanks for the input. I have also thought the same using XSLT or JAVA as in PI7.1 the tag XML is not allowed in xsd. But I got surprise when I have created a data type having a field name as XML and xsd for this has been successfully generated.
Any ways I have handled the entire structure target payload creation in XSLT. here is the XSLT code I have written-
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
 <xsl:comment>
 This XSLT Mapping is designed to handle the PML structure required by SAP AII system.This XSL Transformation will create PML Standard Message in SAP PI.
 Author: majums15
</xsl:comment>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 ./PML/SchemaFiles/Interchange/PMLCore.xsd">
<pmluid:ID xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" />
 <pmlcore:Observation>
 <pmlcore:DateTime>
 <xsl:value-of select="substring(//EDI_DC40/CREDAT,1,4 )" />
<xsl:text>-</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CREDAT,5,2 )" />
<xsl:text>-</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CREDAT,7,2 )" />
<xsl:text>T</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,1,2)" />
<xsl:text>:</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,3,2)" />
<xsl:text>:</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,5,2)" />
</pmlcore:DateTime>
 <pmlcore:Command>TAG_DECOM_BATCH</pmlcore:Command>
 <pmlcore:Data>
 <pmlcore:XML>
 <xsl:element name="PRODUCT">
 <xsl:value-of select="//ZBATMAS/IDOC/ZE1BATMAS/MATNR" />
 </xsl:element>
 <xsl:element name="BATCH_ID">
 <xsl:value-of select="//ZBATMAS/IDOC/ZE1BATMAS/LICHA" />
 </xsl:element>
 <xsl:element name="LogicalDeviceID">
 <xsl:text>DG_GLOBAL</xsl:text>
 </xsl:element>
 <xsl:element name="DOCUMENT_NO">
 <xsl:value-of select="//ZBATMAS/IDOC/EDI_DC40/DOCNUM" />
 </xsl:element>
 </pmlcore:XML>
 </pmlcore:Data>
 </pmlcore:Observation>
 </pmlcore:Sensor>
</xsl:template>
</xsl:stylesheet>
Thanks
Sugata B

ECCS - Integration of an operative FS version with a FS Item Hierarchy

Dear collegues,
I'm trying to create a FS Item Hierarchy on ECCS as a copy from the FS Version (T011) but I'm not able to get the GL accounts as a position, but only the previous node of the tree, I mean, no gl account is populated as a position.
I had already integrated the Chart of positions as a copy from my group chart of accounts but I haven`t managed to go further.
Can somebody help?
Thanks in advance!
Rushid
Has somebody ever come across the same problem?
Edited by: Rushid Rush on Aug 25, 2010 8:56 AM

I have finally noticed it is not possible instead you create as many nodes as group accounts. It means a lot of work but this way it works.

MDM-ECC Integration

Similar Messages

Maybe you are looking for