MDX drilldown Year - Site - Well
Our DW has one fact table (with granularity of a day):
- FactGas (SiteKey, WellKey, DateKey, measures,,,,,,,)
And three dimensions:
- Site (SiteKey, SiteName)
- Well (WellKey, WellName)
- Date (DateKey, DateName, Year, YearName, Quarter etc)
With the DW being updated using CDC and SSIS.
Our OLAP cube is created and we are writing MDX scripts for analysis of our data.
However, we are unable to create a script which displays a drilldown showing Year (Month, Week, Day) - Site (Site Name) - Well (Well Name) - Measures.
Also, there is a one-to-many relationship between Site and Well in the FactGas table.
For example, we need to view our measures
by Date, Site and Well within the cube browser.
Something similar to below where we have year - month - week - date - measures on columns and we can drilldown in to the data
Could you please make sure below points are taken care in design,
*Go to dimension usage and check the relationship. Check site, well and date dimensions are mapped with regular relationship. Now you can check "measures by
Date, Site and Well within the cube browser."
*In the Date dimension build hierarchy for Year->Month->Week->Day. Go to attribute relationship
tab and build relationship: Day->Week->Month->Year
*When you use the hierarchy from date dimension now you should be able to drill down "Year
(Month, Week, Day) - Site (Site Name) - Well (Well Name) - Measures."
May be you have considered above points in your design still I have put them if you have not.
http://www.bifeeds.com
Similar Messages
-
Hi guys,
I created a calculated member using the following MDX query;
CALCULATE;
CREATE MEMBER CURRENTCUBE.[Measures].[Dispute Accepted]
AS
SUM(EXISTING([Measures].[Dispute Logged],([Dispute Status].[Status].&[Accepted]),([Date of Transaction].[Date].[All]))),
FORMAT_STRING = "Standard",
VISIBLE = 1 , DISPLAY_FOLDER = 'Dispute Management' ;
And this is the output i got when I tried to browse the cube. Please can someone help me and check what is wrong with the query. Thanks
meHi lilutchay,
Since this issue is related to Analysis Services, I will move this thread to Analysis Services forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hello all,
This has been a long persisting issue since we purchased Muse in January 2013, but has since then led to a shutdown of my office's website and email in September. Multiple support technicians were eventually able to restore the website, as well as our email function, but the core of the problem lies in the fact that when I update my website, it becomes entirely scrambled, and the only solution provided to me right now is that I need to delete my site completely (through Adobe Business Catalyst) and then create a new one, while transferring over the same domain information. I have yet to receive guidance on how to resolve this issue properly:
September 06 Email: detailing the series of events
Good evening, Zak,
I am reluctant to bring this to your attention because of the comprehensive nature of the following, but I have been told that my absolute last effort should be to contact you with what has been a persistent problem since the last time we had mediated this particular issue. Essentially, when publishing a website multiple times, sooner than later the format becomes scrambled when viewed online. I am being told I am the only customer known to have this issue, and that it needs to be investigated deeper.
This is a blurb from our original conversation in March 2013:
(The whole thread may be found at the following address: http://forums.adobe.com/message/5653912#5653912)
9.Zak Williamson (Adobe),
Mar 12, 2013 4:03 PM in reply to essbarr
I'm also puzzled. This isn't a problem I've seen before for a site published to Business Catalyst.
Please try publishing again, this time to a new temporary site (they're free). You can choose this option under More Options in the Publish dialog. I'm curious whether publishing to a new empty trial site works.
If that doesn't work, please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, SendThisFile, WeTransfer, Dropbox, etc.
Thanks.
10.essbarr,
Mar 13, 2013 6:49 AM in reply to Zak Williamson (Adobe)
Hi Zak,
I published the website to a new temporary site, and it worked beautifully. Now I just have to fuss with the horizontal bar, and then I'll be super happy. Thank you for your help!
Sincerely,
Sarah
Since this bit of advice, I have freely published to a new temporary site every time the website gets scrambled. I have had temporary websites titled:
argponline01.businesscatalyst.com
through
argponline15.businesscatalyst.com
along with a bunch more than I cannot recall.
and Muse files titled:
argp-uc.muse
argponline.muse
argponline_02.muse
through
argponline_05.muse
argponine_3A.muse
argponline_3B.muse
and currently, my file name is
argponline_4.muse (dropbox link)
I am using Muse on a Mac Powerbook, OSX 10.8.4.
I don't know how much of the above is relevant, but maybe it makes a difference to you.
The timestamp on the following thread says September 5th, 2013 4.50AM, but I really sent it the evening of September 4th, 2013. No difference anyhow:
http://forums.adobe.com/message/5653912#5653912
What was going on in detail:
1
I made a few changes to my argponline_4.muse file on September 4th, 2013.
The published website at that point was argponlined.businesscatalyst.com (D).
The domain name was argponline.com .
(D) was published probably about two months previous, maybe longer ago.
When publishing (D) on September 4th, 2013, the website appeared scrambled.
I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop.
I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
2
At this point I have two bookmarked websites for Adobe Business Catalyst Admin Consoles.
For (D), the Admin Console address was argponlined.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
For (F), the Admin Console address was argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
I was able to sign into both.
When signed into the Admin Console for (F), I tried to Add a New Domain, but was told that I only had a plan for one hosted website through Adobe Business Catalyst, and that I would need to purchase a plan that offered more hosted websites.
I signed into the Admin Console for (D) and deleted the domain, but given the option to keep associated files just in case, I opted yes, to keep them.
When signed into the Admin Console for (F), I tried to Add a New Domain, but received the following error message:
Domain already exists. Please delete all records associated with this domain before re-adding it.
There was nothing visible though the Admin Console for (D) to delete the associated records, so I deleted site (D) in its entirety.
I continued to try to Add a New Domain for (F), but continued to receive the same error Domain already exists...
3
At this point (the morning of September 6th, 2013) we have the following set of parts:
The published and launched site is argponlinef.businesscatalyst.com (F).
For (F), the Admin Console address is argponlinef.businesscatalyst.com/AdminConsole/#!/Admin/Websites.aspx
The website is now completely down, and I have disrupted email service for the office.
I chatted with Lokesh, who determined this was a technical issue, and I was forwarded to Anshul.
Anshul's assessment is as follows:
Anshul: I see the error, Sarah it seems there are some Domain traces left with the system , I tried to clear then out and I am getting errors as well. In this case , we might need to escalate the case to higher level to have deeper investigation related to this issue.
Anshul: Sarah, the issue is the domain not the site. It seems like there are some traces related this domain in the backend. This issue is more of related to BC and not Muse. I will have this issue escalated and checked with the team and request them to run internal queries to clear the traces and then you should be able to add the domain.
4
Soon after I received the following message from Matt Baracz:
Matt Baracz (Adobe Business Catalyst Support)
Sep 06 10:50 (EEST)
Thank you for contacting us.
I have escalated this issue to our engineering team and have requested them to clear any references to the domain argponline.com from our database. Once cleared, you will then be able to re-add the domain successfully to your site.
As soon as I receive a response from engineering confirming that this has been actioned, I will let you know directly via this support ticket.
Regards,
Matt.
Around 3 or 4pm, I had not heard anything back, so I attempted to Add a New Domain through the Admin Console for (F). (Turns out Matt works in Australia, and was unable to alert me due to the time zone difference. Understandable!)
This was done successfully, so the website began to work again, but the email was still down.
5
I began a chat again, this time with Srividya. I was transferred to technical support and began conversation with Sanjit. The length of our conversation was probably around 3 hours, and I am so grateful for the time he put in. What a great guy.
He stated that he had gone through the case details and that Engineering had fixed the issue. We spent some time coordinating the Site Domain information through the Admin Console for (F). Ultimately, email is still not working (settings were probably updated around 5pm), but I understand sometimes it takes a while. Just wanted to note, the last time I updated the email settings it worked within a couple minutes. Varying lengths of time are expected, but I am still curious what effects those variations. Regardless.
6
The current situation is this:
My boss is a bit steamed that our website was down for a day and a half, and that our email is down for a relatively indeterminate amount of time. It's bad for business, and ultimately, I am responsible for these disruptions. I am incredibly concerned that the next time I update our website there will be a slew of problems, which have the potential to knock down service for the website and email again. I am desperate for a surefire way to simply and fluidly update our Adobe Muse website to Adobe Business Catalyst without making the same mistakes again.
I don't believe I did this the right way. I looked at FAQs, Community Forums, goDaddy Support and anything I could lay my eyes on to try to do things properly, but managed to make a few well-intentioned blunders. I continued to try undo the damage I've done in the past couple days, and with utter frustration, have not been able to fix them on my own. The people who have helped me thus far have done an amazing job, but ultimately, I am happier when I am not taking up their time, or panicking here.
When I first launched the website a few months ago, there was a step-by-step process that took me through every single action with screenshots included when appropriate. It was exponentially helpful. I was so lost without it this time around, and I was wondering if I could access it again in the future if needed.
The following is a blurb from my conversation with Sanjit tonight:
Sanjit: You have purchased Muse subscription , correct ?
Sanjit: or Creative cloud >
Sarah Rushing: Yes, we purchased Muse for 1-year, as well as Business Catalyst for 1-year
Sanjit: Perfect
Sanjit: With Muse you get 1 free site , so once you create a site and then publish to BC. In admin console you launch the site, that makes your free count used. Now if you create another site, then system asks you to upgrade the site to a paid site plan. ut when you delete the previous site then the free count becomes free and can be used for any other site
Sarah Rushing: Yes, that is what I did. Is this what I need to do each time? Because I am concerned that the email and website will be disrupted every time I need to make slight adjustments to the website?
Sanjit: No, you dont need to do that everytime. If the site is scrambled everytime you publish then please report to us. Thats not the ideal way for solution.
Sarah Rushing: Well Sanjit, I can tell you right now, that is how it has been functioning since we bought the program. I am not entirely certain, but I believe we bought Muse and BC in January.
Sarah Rushing: I can absolutely guarantee you that the site will inevitably scramble. Am I the only customer you have heard of to have this issue?
Sanjit: Yes, i have not seen any other reports for this issue
Sanjit: Well this needs a deep investigation
Zak, anything that you could offer for clarity of process, would be incredible. I don't know if you will have time to look at this before Monday, but I can tell you I will be available at a moment's notice to fix this issue and to learn anything about Muse and Business Catalyst that you have to offer. Thank you for your time, and I hope you have a wonderful weekend.
Sincerely,
Sarah Rushing
I'm concerned that no one will really read this because it is so detailed and boring and comprehensive, but it is absolutely critical that I find a proper solution before the next update to the website. Thank you so so much to anyone who can possibly provide some insight into this issue.
Sincerely,
Sarah RushingIn case anyone is experiencing the same issue, I am trying this today.
Sachin: Okay Sarah, so is it everytime you try to republish the website, it gets scrambled?
Sarah: Yes, that is correct. And the solution thus far was to publish to an entirely new site, meaning delete the existing one on Business Catalyst and transfer the domain information.
Sarah: The last time I did that I experience a slew of issues that resulted in no website and email for 4 or more days. My boss was very angry.
Sachin: Sarah, can you publish your site as a new trial site once.
Sachin: And provide me the URL.
Sachin: Then republish on the same trial site and let me check the results.
Sarah: If I updated the published site within the period of a day, it will be fine. It is when I update the next day or later than that, then the website appears scrambled. So I can create a trial site for you, but it will behave normally for now.
Sachin: Sarah, while republishing the site, did you select "Only modified file" or "All files" while publishing?
Sarah: I tried everything.
Sarah: I made a few changes to my argponline_4.muse file on September 4th, 2013. The published website at that point was argponlined.businesscatalyst.com (D). The domain name was argponline.com . (D) was published probably about two months previous, maybe longer ago. When publishing (D) on September 4th, 2013, the website appeared scrambled. I tried to publish only modified files, as well as publish the entire site, as well as close programs, and restart the laptop. I decided to follow the advice given previously, and I published and launched argponlinef.businesscatalyst.com (F).
Sachin: Okay. there is one more thing I would like you to try.
Sachin: Publish a site as a trial site.
Sachin: Then wait till tomorrow.
Sachin: After that login to the admin panel of the site.
Sarah: Okay
Sachin: There go to Site Manager>File manager
Sachin: There will be a file there named Muse_manifest.xml
Sachin: Delete that file and then republish the site from Muse.
Sarah: So in the Adobe Admin Console, underneath Site Manager, I see Web Forms and System E-mails. No file manager?
Sachin: Please hover the muse on your name at top right corner and click on My details.
Sarah: Okay, yes.
Sachin: Now scroll down and check the option that says Enable online content editing (incompatible with Muse)
Sachin: And then click on save.
Sarah: What does this do, and why does it say it is incompatible with Muse?
Sachin: It will help you see other options in BC.
Sarah: Okay, thank you.
Sarah: I see the File Manager now
Sachin: Okay.
Sachin: Now select the file named Muse_manifest.xml
Sachin: And use the delete button on the right side.
Sachin: but do it tomorrow
Sachin: With a trial site
Sachin: Not with the live site.
Sarah: Okay, could you please explain to me what deleting that particular file is supposed to do? I am just very interested in how this works.
Sachin: This file contains the information about your last upload.
Sachin: Deleting it will make sure that "ALL" the files are uploaded again from Muse.
Sarah: Okay, so:
Sarah: I will publish a trial site.
Sarah: Wait until tomorrow.
Sarah: Publish again. If I have an issue, I can log-in to the admin console for this particular trial site and go to Site Manager --> File Manager, and delete muse_manifest.xml.
Sachin: I will create a case for you and you can respond to the case.
Sachin: Correct.
Sarah: After that, I will try publishing again and see if it resolves the issue.
Sarah: That would be great, thank you Sachin.
Sachin: Thank you for contacting us. Have a Good Day! -
Can You Create a Fully-functional Web Gallery for a Non-.Mac Site?
I love the idea of the web galleries that iPhoto '08 uses and would buy iLife '08 for that alone... but I don't have a ,Mac account and don't plan to. I have seen only one mention of this in these discussions, and it was only speculation. So here's the question:
Can iPhoto '08 create web galleries with all the goodies involved--skimming over a gallery to see thumbnails of all the images for example--which will be fully functional on a private, non-.mac web site?
If so, then count me in.this may seem other than your request, but I have a suggestion:
just buy a darn .Mac account already. Personally, I've grown tired of hearning about how .Mac is unreasonably priced all these years. Well guess what, a basic account now gets you 10 gigs of space for about $90 if you pay the taxes. Thats an additional fee that you feel you shouldn't have to blah, blah, blah. -Sure, you can host to your own .com via iWeb and I'm sure we'll all hear about how to host other things without a .Mac account soon. But just pretend iLife costs an additional $90 and move on. It's worth it once you start to use it and you can say good buy to your concern. again, sorry for the indifference, but you can easily get past your issue. Think of it this way... there are many ways to upgrade to iLife '08 that will save you the same amount of money. If you're that cheap, go that route. If you're reasonable, like the rest of us that understand we need to pay (yes, unfortunately) for Apple's innovation, get on the boat and enjoy the ride.
crucify me if you want... this ends my rant. -
New desktop computer for gaming as well as normal stuff
I am looking for a new desktop computer that I could use for gaming--such as League of Legends and anything else I might find in the coming months/years, as well as eventually being able to hook up ps3 games eventually, but probably not right away. I am looking for suggestions on what specific systems to get and/or what specifications for a desktop i should be looking at. I am entirely new at this and could use help from every direction. Any help is appreciated
The biggest things you need to look for are CPU(for gaming and your budget look for Core i7's or AMD x6's), RAM - most gaming computers come with 6-8GB now, and a discrete video card. I am partial to nVidia chips, but an ATI card will work just the same.
As for brand, I prefer ASUS for gaming machines as they do have a gaming line.
Are you going to be looking for a package, monitor, tower, etc? Or do you already have a monitor?
http://www.bestbuy.com/site/Asus+-+Essentio+Desktop+/+AMD+Phenom%26%23153%3B+II+X6+Processor+/+8GB+M...
Just at a quick glance, this is a decent system to kinda base what you're looking for off of. The CPU is decent, good amount of RAM. The graphics could be a bit stronger, though you could always upgrade that.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun. -
I want to insert local time & date in my site
Wednesday 25 May 2008 | 13:01 GMT+2 | Cyprus-EU
I want to insert local time & date in my site , well zone
is GMT+2 , below is correct for date , what about time ?
[CODE]<script language="JavaScript"
type="text/javascript"><!--
var months = new Array("Jan", "Feb", "Mar","Apr", "May",
"Jun", "Jul","Aug", "Sep", "Oct","Nov", "Dec")
var weekdays = new Array("Sunday", "Monday",
"Tuesday","Wednesday", "Thursday","Friday", "Saturday")
var today = new Date()
//-->
</script>
<script language="JavaScript"
type="text/javascript"><!--
// Today is Weekday, Month Day, Year
document.write(weekdays[today.getDay()], ",
",months[today.getMonth()], " ",today.getDate(), ",
",today.getFullYear())
//-->
</script>[/CODE]This is correct(js) ?
[CODE]<script type="text/javascript">
var d = new Date();
gmt=d.toUTCString(); // get GMT Time/date
// document.write (d.toUTCString());
var gmt2ms = new Date(gmt.valueOf()+60*60*1000*2); // add two
hours in ms
document.write(gmt2ms.toString()); // write date as Sun, 25
May 2008 14:19:30
</script>[/CODE]
What the
x.valueOf()
x.toString()
do ? -
I have been using FF for several years and well as front page to maintain and upload to my site. As of two days ago I started getting comments that recently updated pages were not readible. I have not changed any settings but have found out that what can not be read in Fire fox can be read just fine in IE
Can you post a link to a public page that doesn't require authentication (log in) to access it?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Websites+look+wrong
If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Dreamweaver 8 crashing when openning swf site
It is only happening when i open the site I placed a swf file
in. But thats it, wont open at all for any site afterwards. I have
dreamweaver open now after a FEW restore points, and the 8.0.2
update, too damn scared to try and open that site again, It was
fine the whole time I built the site, well dreamweaver just shuts
down occasionally cant even say what I was doing when it does. I
can live with that considering I have learned the hard way to save
constantly. The last couple of days have beem hell trying to get
dreamweaver to stay open
also I ALWAYS get this error, xml syntax error and script
file in configuration.js
I have reinstalled DW. Also was losing my ftp details all the
time I opened DW8 but thats fixed now with the 8.0.2 update.
I saw a notice regarding the flash video files cross script
problem for cs3, but not DW8.
thanksI am using Dreamweaver 8.0.2 on a PC. A couple days ago, my
DW 8 wouldn't start-up. When I do start it, I get the green opening
banner, but no flashing in small fonts as it loads the various
parts or functions of DW 8. Eventually I have to force close
(right-click on tab>Close on tab at the bottom of my screen) or
do a Ctrl+ALT+Delete. Sometimes if I wait, after SEVERAL minutes,
DW starts. I don't know how reliable it is though when it does
start.
I don't know what happened or changed. I saw online somewhere
that if I go in and make a copy of the 'Configuration' folder of
DW, then delete the old 'Configuation' folder, when DW restarts, it
will make a new 'Configuration' folder. I did that and it works
great, but I have to reset my palettes, which is fine.
But I also noticed that ALL my DW extensions are turned off
in 'Extension Manager'. So I go through them all and turn them all
on. Now my DW is back to hanging and not restarting. I tried just
loading a couple extensions I really need and it still starts
properly, then I turn on another one and it's back to hanging.
This is really frustrating and I really need to get some work
done. Help!!! What do I do so I can get DW 8 up and running again
with ALL my extensions like it was for many months/years???
Please get back to me ASAP. You can send e-mail response to
wildbarry[at]shaw[dot]ca. Thanx
Barry -
Expression to find value for previous year SSRS
Hi
I need some help with expressions.I need a report that shows calcul of a field for current year as well as previous year respecting this rule expression(Last-Last Previous)/Last Previous*100 (I work with MDX Query and i work with SSRS 2008).
Also the report runs on a Year Parameter. Below is an example for the result
for example i selected the years 2010 2011 2012 i can select another years because i have the report runs on a Year Parameter
year
Data 2010 2011 2012
hp 14 25 30
Dell 17 18 20
and the result i want
year
Data 2010 2011 2012 2011/2012
hp 14 25 30 0.002 (Last -Last Previous)/(last Previous*100) =(30-25)/(25*100)
Dell 17 18 20 0.0040
Thanks a lotHi Yassir,
Please find the RDL code, save the code into .RDL and run it
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="matrix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.21in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!value.Value)</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox16">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=((last(Fields!value.Value) -Code.GetValueByKeyValue(Fields!keyvalue.Value)) /Code.GetValueByKeyValue(Fields!keyvalue.Value))*100</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<Format>f2</Format>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox16</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
<DataElementOutput>Output</DataElementOutput>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.21in</Size>
<CellContents>
<Textbox Name="year">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>year</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.21in</Size>
<CellContents>
<Textbox Name="Textbox4">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox4</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="matrix1_data">
<GroupExpressions>
<GroupExpression>=Fields!data.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!data.Value</Value>
<Direction>Descending</Direction>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1in</Size>
<CellContents>
<Textbox Name="data">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!data.Value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontWeight>Bold</FontWeight>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>data</rd:DefaultName>
<Style>
<Border>
<Color>LightGrey</Color>
<Style>Solid</Style>
</Border>
<BackgroundColor>#6e9eca</BackgroundColor>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<RepeatColumnHeaders>true</RepeatColumnHeaders>
<RepeatRowHeaders>true</RepeatRowHeaders>
<DataSetName>DataSet1</DataSetName>
<Top>1.20333in</Top>
<Left>0.10833in</Left>
<Height>0.42in</Height>
<Width>3in</Width>
<Style />
</Tablix>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Get the last previous value</Value>
<Style>
<FontFamily>Tahoma</FontFamily>
<FontSize>12pt</FontSize>
<FontWeight>Bold</FontWeight>
<Color>SteelBlue</Color>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<Height>0.37in</Height>
<Width>5in</Width>
<ZIndex>1</ZIndex>
<Style>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
<Tablix Name="Tablix1">
<TablixCorner>
<TablixCornerRows>
<TablixCornerRow>
<TablixCornerCell>
<CellContents>
<Textbox Name="Textbox7">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>data</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox7</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCornerCell>
</TablixCornerRow>
</TablixCornerRows>
</TablixCorner>
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
<TablixColumn>
<Width>1in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.25in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="previous">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Sum(Fields!previous.Value)</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>previous</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Textbox21">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Code.AddKeyValue(Fields!keyvalue.Value, last(Fields!previous.Value))</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox21</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="year">
<GroupExpressions>
<GroupExpression>=Fields!year.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!year.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="year1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!year.Value</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>year1</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
<TablixMembers>
<TablixMember />
</TablixMembers>
</TablixMember>
<TablixMember>
<TablixHeader>
<Size>0.25in</Size>
<CellContents>
<Textbox Name="Textbox20">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value />
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Textbox20</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<Group Name="data">
<GroupExpressions>
<GroupExpression>=Fields!data.Value</GroupExpression>
</GroupExpressions>
</Group>
<SortExpressions>
<SortExpression>
<Value>=Fields!data.Value</Value>
</SortExpression>
</SortExpressions>
<TablixHeader>
<Size>1in</Size>
<CellContents>
<Textbox Name="data1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!data.Value</Value>
<Style>
<Color>White</Color>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>data1</rd:DefaultName>
<Style>
<Border>
<Color>White</Color>
<Style>Solid</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixHeader>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>DataSet2</DataSetName>
<Top>0.43944in</Top>
<Left>0.29667in</Left>
<Height>0.5in</Height>
<Width>3in</Width>
<ZIndex>2</ZIndex>
<Style>
<Border>
<Color>White</Color>
<Style>None</Style>
</Border>
</Style>
</Tablix>
</ReportItems>
<Height>1.76333in</Height>
<Style />
</Body>
<Width>5.10833in</Width>
<Page>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>87cd8154-60ce-43ca-a678-39a5c1bfeb15</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet2">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Year">
<Value>=Parameters!Year.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>select * from
SELECT data, year , value AS previous,cast(year as varchar)+ data as keyvalue,row_number() over(partition by data order by year desc) yeardesc
FROM (SELECT 'HP' DATA, 2010 year, 14 value
UNION
SELECT 'HP' DATA, 2011 year, 25 value
UNION
SELECT 'HP' DATA, 2012 year, 30 value
UNION
SELECT 'Dell' DATA, 2010 year, 17 value
UNION
SELECT 'Dell' DATA, 2011 year, 18 value
UNION
SELECT 'Dell' DATA, 2012 year, 20 value
) AS t
WHERE year IN (@Year)
)t1
where yeardesc <> 1
order by year asc</CommandText>
</Query>
<Fields>
<Field Name="data">
<DataField>data</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="previous">
<DataField>previous</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="keyvalue">
<DataField>keyvalue</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="yeardesc">
<DataField>yeardesc</DataField>
<rd:TypeName>System.Int64</rd:TypeName>
</Field>
</Fields>
</DataSet>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Year">
<Value>=Parameters!Year.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>SELECT data, year, value,cast(year as varchar)+data keyvalue
FROM (SELECT 'HP' DATA, 2010 year, 14 value
UNION
SELECT 'HP' DATA, 2011 year, 25 value
UNION
SELECT 'HP' DATA, 2012 year, 30 value
UNION
SELECT 'Dell' DATA, 2010 year, 17 value
UNION
SELECT 'Dell' DATA, 2011 year, 18 value
UNION
SELECT 'Dell' DATA, 2012 year, 20 value) AS t
WHERE year IN (@Year)</CommandText>
</Query>
<Fields>
<Field Name="data">
<DataField>data</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="year">
<DataField>year</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="value">
<DataField>value</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="keyvalue">
<DataField>keyvalue</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="Year">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>=2010</Value>
<Value>=2011</Value>
<Value>=2012</Value>
</Values>
</DefaultValue>
<Prompt>Year</Prompt>
<ValidValues>
<ParameterValues>
<ParameterValue>
<Value>2010</Value>
<Label>2010</Label>
</ParameterValue>
<ParameterValue>
<Value>2011</Value>
<Label>2011</Label>
</ParameterValue>
<ParameterValue>
<Value>2012</Value>
<Label>2012</Label>
</ParameterValue>
</ParameterValues>
</ValidValues>
<MultiValue>true</MultiValue>
</ReportParameter>
</ReportParameters>
<Code>Public PersSal as New System.Collections.HashTable()
Function ClearList(SomeValue as String) as String
PersSal.Clear
Return SomeValue
End Function
Function AddKeyValue(KeyValue as String, Value as Decimal) as Decimal
Try
PersSal.Add(KeyValue, Value)
Return Value
Catch ex as Exception
End Try
End Function
Function GetValueByKeyValue (ByVal Key As String) As Decimal
For Each clsPair As System.Collections.DictionaryEntry In PersSal
If clsPair.Key.ToString() = Key Then Return clsPair.Value
Next
End Function</Code>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>53660ed8-b969-46cf-960b-2ccb14abf7e7</rd:ReportID>
</Report>
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further. -
Mobile site for Industrial Supplier?
Hey gang,
I am wondering what the concensus would be on this topic. I don't know how prolific mobil sites are, outside of entertainment genres.
We have been an industrial company that largely works towards the oilfield market and related industries. We now are jumping into what is called, Specialty Gases which still deals here but also moves us into laboratory, natural gas transmission and other, highly technical fields. With this in mind, I realize the customers/individuals are of a different caliber, they are likely more technologically savvy.
With this in mind, do we seem like a good candidate? Do you see a potential ROI?
What do you think?
RobHi Rob
Mobile friendly/specific sites are said to be the big growth area now, but they said that last year as well !
The easiest way is probably to check your site stats for the number of visitors using mobile os's and browsers. But even that may not be enough, I can tell you that designing and building a site specifically for mobile devices is just as complex, and probably costs more if done on its own than a 'standard' desktop site.
The other thing to remember is that any ROI will be difficult to calculate as most potential customers will 'check-out' the mobile site, then actually order/contact-you using a desktop.
PZ -
I know that I complain about Dreamweaver a lot. But, that is
because there are a lot of things to complain about Dreamweaver. I
know a lot of programmers love it and it's probably a great tool
for writing scripts etc. but for site maintenance I find it very
weak to the point of being pathetic (and job threatening).
One of my clients has a site that is quite large -with
approximately 2,300 items to keep track of (pages, images, etc.).
Dreamweaver has not been able to sufficiently manage the site well.
It constantly loses track of page links, and just this morning I
discovered that Library Assets on several pages have mysteriously
become unlinked. But the kicker is, if I make an update to the
Asset, Dreamweaver ACTS like it is making the updates to all of
those pages - but it isn't. That kind of poor linking and dropping
page information is unacceptable. Other coding issues have
periodically popped up as well - Drop Menus for some reason stop
working and must be replaced even tho nothing has been done to
them. They just stop working.
And again, Dreamweaver is terrible at uploading updated files
to the server. It often skips pages and images that have just been
updated - causing me to have to manually triple check each file to
make sure it was uploaded. Not a real confidence building piece of
software.
Those are just the most recent developments in Dreamweaver's
poor site management. I've been on Dreamweaver seriously for a year
now and frankly I have not been impressed by it's performance at
all.
The program interface also doesn't add any ease of use to the
work flow either. The Windows "explorer" navigation is terrible and
I swear they must have used the same rendering engine that Internet
Explorer 6 uses because they look exactly the same - terrible.
Thanks for promoting such a crippling application Adobe.
On the bright side now I know how all of those Microsoft IT
professionals feel about job security due to terrible software that
they support."Damn the torpedos" <[email protected]>
wrote in message
news:go6c7h$f90$[email protected]..
>I know that I complain about Dreamweaver a lot. But, that
is because
>there are
> a lot of things to complain about Dreamweaver.
The problems you list certainly sound like showstoppers. All
I can say
is that I have never encountered them, but I don't maintain
such large
sites, so that might explain the difference. Getting things
off your
chest here undoubtedly helps you let off steam, but it
doesn't get the
message to where it really matters: the development team. If
you come
across serious issues that affect your workflow, file
detailed bug
reports through the feature request/bug report form:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Rather than pile all your complaints into one submission,
focus on one
issue at a time, and give detailed steps of how to reproduce
specific
problems.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com -
There are quite a few songs, videos, television shows, and movies I purchased years back, well before the cloud with two different user id's that I don't remember the passwords for, and when I try and get to the security questions, it says the information doesn't match. I'm ****** because I'm sure they will have some convenient excuse for not getting me out of this mess with my new laptop, but as long as my old one works, I can still access the previous library, where EVERYTHING plays. How can the new laptop not be recognized when I had all of the information transferred from the old laptop? Now I have to hope my old laptop doesn't crap out for a few years longer!!
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
¿Can I still use CC applications after 1 year commitment?
Well, I am almost ready to start an annual subscription for the creative cloud, but I have a question about what will happen after the 1 year commitment:
After I have paid 1 year of subscription, that means: 12 x US$49.99 = US$600, and I cancel the subscription some days after commitment has finished, can I still using the applications ?, or they will stop to work inmediately
Another way to ask the same: ¿After I've paid US$600 can't I use any application because I cancel the subscription?, that means ¿I must Pay US$600 each year to be a developer or designer that use Adobe products?, well this sounds like the more expensive products on the Market ¿isn't ?
What will happen with individuals, small or even medium companies that have used Adobe products for years paying just for the upgrades only when is needed, each 2 or 3 years ?, well I think those companies or individuals will be forced to change its production or designing software for something more profitable.
Now think in large companies with more of 50 employees, they must pay US$30.000.oo each year, indefinitely ?, wow I think this will be so expensive that companies will be stop using Adobe products.
I hope the answer for this quation will: After 1 year commitment you are the owner of what you paid.If you don't continue the subscription then you lose the ability to use the software.
-
Dimension 'Years' failed validation
Hi All,
I am getting this error while deploying the application.
Error : Dimension 'Years' failed validation 'YearMembersSequential' for the following reason(s): Year members must be sequential.
I am seeing my Year dimension is sequential only.
I am not able to figure out the reason for this error . Can anyone please help me understand this.Not to open a new thread as I have an issue with dimension Year as well, I will post my problem here (hope the author won't mind).
I created a simple EPMA application in version 11.1.2.2 with all mandatory and 2 generic dimensions. One of mandatory dimension is, of course, Year (dimension type: Year) with following members: FY11, FY12, FY13. Initial deployment against both, Planning and Essbase went well. After that I wanted to extend dimension Year for member FY14 and to redeploy the application. Validation was successful, but deployment message was "Completed/With Errors" (100%). Deployment was done with selecting "Refresh outline" and "Full deploy". In deployment log file I have the following entry:
"Consolidation operators for years must be set to Ignore for all plan types."
"Rejecting Member FY14."
This message is clear enough, but the problem is that members that belong to dimension type Year don't even have consolidation operators in properties area.
What else comes to my mind is that (maybe) with version 11.1.2.2 it is not allowed to add new members for dimension Year once application is deployed for the very first time. But in that case, the above error message is quite misleading. Under version 11.1.1.3 it is possible to add new members to dimension Year and to redeploy it without errors.
Is this a bug or a feature?
Has anyone had such problem?
Thanks,
Damir -
I Just bought a scrabble game but it doesn't sit well in my IPad cars. It diets vertically so I can't recharge my ipad while I'm playing and it won't sit up in my IPad case, it refers when my iAd is sitting horizontally. D like to either be given instruction on how to turn or I'd like to exchange for a different Sctabble game that will sit the right way, for my IPad.
I have tried clicking all around and I cannot get to the contact manager at all anymore. Now when I click to it I go to My Verizon Online Sign In - Verizon Wireless (not sure if that link works here) and the web site says:
You are seeing this page for one of the following reasons:
1) The Sync & Connect feature does not appear on your account. To add this feature click on Home above, then click on the Change Features link.
2) The Sync & Connect feature has recently been added to your account and the request is in process or pending completion. Please sign in again later.
There's no "Home" or "Change Features" visible on that page. The more I do the stranger the site has gotten. This time it kept telling me I needed to sign back in, but then it would continue acting as normal (I AM signed in).
I suppose there's a glitch.
Maybe you are looking for
-
Why cant I highlight part of a document and print only what is selected in safari?
Why is it not possible to highlight and print the selection in Safari, thought the imac was supposed to do everything, WRONG. I also have I.pad 2 and because it does not support adobe flash, I cannot open a magazine that I have each week, I have to
-
Converting files into pdf format in java
Hi all, How can we convert a file into PDF format in java?My application does the file upload, and I need the files to be converted into PDF format. The uploaded file can be of any type. How can I do this? Please give me some help. Thanks and regards
-
I created a sync account in June 2012 and synced it periodically. In early January 2014, I was having some pc issues so I backed up all my data on my pc and dropped it off to Best Buy/Geek Squads. My pc has been repaired and returned back to me today
-
LG Optimus Exceed 2 - Keyboard disappears
I've only had this phone a couple of months. The first problem started with the keyboard issue. I'd be typing and after a few keystrokes the keyboard would just disappear. I could tap the message box, or toolbar, whatever I was typing in and MAYBE
-
I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calenda