MDX SUB VAR ERROR

Hi All,
I'm trying to write a simple MDX formula, however when I try to use a SUB VAR in the formula I keep getting an error message. However, when I replace the Sub Var with the member name the SubVar is currently set to, it works.
The formula is:
1 - IIF (IS(QTR.CurrentMember, [Q1] ), [&q1hybcqw],0)
The &q1hybcqw is set to a member from a different dimension to that stated in the IS(QTR.CurrentMember, [Q1] ). When I use the actual member it works, which give's the formula:
2 - IIF (IS(QTR.CurrentMember, [Q1] ), [EOQ],0)
The error in formula number 1 is "Error(1260046) - Unknown Member "EOQ" used in queryhybyrCQW" - note - "hybyrCQW" is the name of the member that contains the formula.

In calc scripts, the substitution variable should have quotes around the member, even if it doesn't otherwise need them -- I don't know if this is the same case for MDX calcs though, but give it a try as it might be at least part of the answer.

Similar Messages

A way to track where all the Sub Var are applied?

Hopefully this is the section where to post.
Is there a way of tracking where all the substitution variables are being used in the reports?
Either in reports or calc scripts, or in a 3rd format, if there is one.
We just don't want to open up each script individually and scan for use of the sub var, or open each report and see if it's used.

Hi there,
Is this HFM or Essbase?
Regards,
Thanos

MDX script editing error generated at each keystroke

I'm having the same issue in VS2012. When I edit an MDX script the error window pops open between each keystroke. I have to copy the script into notepad, edit, then return it to the MDX editor. Very annoying!!!

Actually I get it in the Calculations tab of SSAS 2012 while inside Visual Studio 2012. I can toggle back and forth between script view and form view without error (and the build is clean), but when I start to type anything in form view it pops up the error
window between every single key stroke.
I've looked for options to turn off automatica error checking but don't see anything like that.
chris choate
Hi Chris,
Could you please post the detail error message to us for further investigation? If possible, please post a screenshot about this issue.
Personally, you can try to reinstall Business Intelligence for Visual Studio 2012 to see if this help.
Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012:
http://www.microsoft.com/en-us/download/details.aspx?id=36843
Install SQL Server Data Tools - Business Intelligence for Visual Studio 2012:
http://technet.microsoft.com/en-us/library/jj856966.aspx
If you have any feedback on our support, please click
here.
Best Regards,
Elvis Long
TechNet Community Support

Sub var question

Hello...I have two questions re: substitution variables. 1. I believe Essbase evaluates sub vars "bottom-up"--that is, if you have the same variable name at multiple levels (database, application, server), Essbase uses the value from the lowest level. This is the case regardless of whether you're using the variable in a calc, report script, spreadsheet retrieval, etc. Is this correct? 2. What in the world does the "Set Substitution Variable Scope" command in the calc script editor do? It doesn't effect syntax checking, or the way the calc runs. I've also noticed this command doesn't exist in EAS... Thanks, Jared 

You already have a spry horizonal menu that you appear to be using as a vertical. You might be able to insert another <ul> within the <li>, like so
<ul id="MenuBar1" class="MenuBarHorizonal">
<li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
 <ul>
 <li><a href="#">Item 1.1</a></li>
 <li><a href="#">Item 1.2</a></li>
 <li><a href="#">Item 1.3</a></li>
 </ul>
</li>
If that does not work, perhaps you might just want to delete what you have and insert a vertical spry menu.
I also notice all of your html files start with caps, looks like you have an Index html and a index.html. I'm guessing that gave you a few headaches.
Gary

Dynamic Calc'd Member not picking up Sub Var changes - 11.1.1.3

Hi,
We have a Dyn Calc'd member formula using a sub var on a member. When sub var is updated, values in member formula referencing the sub var don't update. We have stop and start the application for it to pick up the new sub var in the member formula.
any ideas?

Unfortunately you have to live by the definition in dbag which is in the post that Tim provided the link for but nobody seems to follow links these days :)
"To ensure that a new substitution variable value is available in formulas, partition definitions, and security filters, stop and restart the application. All other uses of substitution variables are dynamically resolved when used."
Cheers
John
http://john-goodwin.blogspot.com/

Sub Var in FR

I am using System 9.3.1. While creating the FR using the Studio, I am not able to get the sub var from Essbase. Other than that everything is working fine. Anyone encountered similar problem?
Thanks

Financial Reporting let's you connect to different services in System 9.3.1. For example you can use the Essbase Analytics connector to access Essbase properties or the Planning connector to access Planning properties.
Make sure you are connecting through the Essbase connection to have Subvars available to you.
Also make sure your substitution variables follow recommended naming standards. I.e. do not begin with numbers or have foreign characters. I also try to keep them less than 8 characters.
Hope this helps,
Brian Chow

Hyperion Reports - Suppress based on Sub Var

Hi, I have a report with the time periods in the columns. Column [A], which is suppressed, is Sub Var $CurMnth. Column "B", which is suppressed, is a range of time periods (months). Column [C] is the sum of Column "B". I want to conditionally suppress Column [C] based on the value of the CurrMth Sub Var. So, IF CurMnth = Jul, then suppress Column [C]. I can't find a way to do this. Is it possible? Thanks. 

Well, if your value "Jul" does not changes, the youcan do conditional supressions. Suppose you column with sub var is colum a then use If data value in cell [a,1] is equal to data Jul, --> usethis condition for conditional supression. I use something like this in my reports and it works fine. hope this helps !

Formula to check sub var

Hi All,
We have a formula on a member. the calc is dependant on substitution variable: CURRENTMONTH...
IF (&CURRENTMONTH == @ISMBR("Jan"))
when i use the above its not working..............how can i check the sub var &CURRENTMONTH

I like IF(@ISMBR(&Currmth) and @ISMBR("Jan"))
comparisons of member names don't work very good until you get to 11.1.2 and have the membercompare function

Sub Var's in ASO MDX?

Hi,
Have a calc: Qty = Rate * 100
However the 100 needs to change based on whatever criteria user has. Users say it could range from 1 to 250 and they want to be able to choose it at time they retrieve. I'm thinking the only way to do this would be to create 250 Account members named 'Qty 1', 'Qty 2', 'Qty 3' etc..... and then have each formula with the corresponding value from 1 to 250?
Qty 1 = Rate * 1
Qty 2 = Rate * 2
Qty 3 = Rate * 3
Then they just choose the proper Account?

Many will disagree with me, but I don't think it is a problem a calculation should solve. Because there is no rule or reason in place to determine the value. I think the best solution is to just store the rate and let the use calculate the result in their fornt end tool

MDX open interface error?

has anyone come across this error in Excel client? i get it when trying to remove 0's from the summarized values.
[MDX error|http://misiorek.com/mdx/MDX06.jpg]
apologies for small screenshot but this is a resolution for full screen and screen scraper requires it to be minimized.

Hi,
Please see these docs.
INCOIN: Error Message Template_ID or Template Name Specified is not a Valid Template When Item Catalog ID is NULL during Item Import in UPDATE Mode [ID 1076193.1]
Item Import: What Does "Sync" Items Do? [ID 417887.1]
INCOIN Gets INV_TEMPLATE_ERROR After Patch Applied [ID 141579.1]
Item Open Interface (INCOIN/IOI) Setup and How-To [ID 115557.1]
Understanding Item Import and Debugging Problems with Item Import [ID 268968.1]
Thanks,
Hussein

Missing Sub VI error when running Application.exe in development PC

Hi,
I have created an application(exe) on my computer, which is also where I have also designed the different blocks of code for this application.
All the blocks of code work just fine when made to run through Labview 2013 development software. After adding all the VI files associated with the project in the project explorer of a new project and configuring the build specifications, I was able to create the executable. But, when I try running this executable/application(.exe) file, I get the missing subVI message. I found that some of these missing sub VIs are the Instrument driver VIs which work absolutely fine when run through the LabVIEW development sofware.
How can I resolve this issue?
Attachment "Error Screenshot" shows the Missing sub VI message.
Attachment "Project & Error Screenshot" shows the Missing sub VI message along with the list of dependencies in the project, which shows the error being displayed eventhough the sub VI is present in the dependency list.
Any comments in this regard are highly appreciated.
Regards,
Vivek
Attachments:
Error Screenshot.jpg ‏257 KB
Project & Error Screenshot.jpg ‏360 KB

vivek.madhavan.13 wrote:
Thanks for your comment Jeff,
But what about the 'subBuildXYGraph.vi', 'Waveform Array To Dynamic.vi' and other such VI's in the attached error message that are not a part of the Rohde and Schwarz drivers but are included in the vi.lib folder? Ideally, labview must be able to find/trace atleast these VIs while performing the build procedure, right?
Vivek
If they are (Non dynamically called)-dependancies of always included dynamic calls, Yes, the build will include them.
I hate to say it but, Start with the rs dynamic vis and keep adding if that meerely helps reduce the list of the missing vis.
Jeff

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

Sub-contracting error?

hi Gurus
Can anybocy give some input for my problm. While creating Sub-contract PO, i m getting error "Combination item category L/account assignment category K not defined"
Pls send me some solution
Thanks By
sap-mm

go to the tc olme and ther in the account assignement --->define combination of account assignment and item category
do this for u r item category and for the account assignement category and u r problem will be solved
Edited by: Rahul Tyagi on Apr 4, 2008 4:34 PM

MDX query : Syntax error at token 'NONEMPTYMEMBER'

Syntax error when executing this very simplified MDX query :
WITH
MEMBER [ANNEE].[YEAR1] AS
NONEMPTYMEMBER FY10
[FY10]
MEMBER [ANNEE].[YEAR2] AS
NONEMPTYMEMBER [FY10]
[FY10]
SELECT
{[YEAR1],[YEAR2]} ON COLUMNS
FROM [MICOPIGE.COM_MBU]
Syntax error in input MDX query on line 9 at token 'NONEMPTYMEMBER'
Note that line 9 "NONEMPTYMEMBER FY10" is a copy of line 4
No error if I delete line 4
Any help to understand and fix this error would be greatly appreciated.

Precision : My goal is to reduce the 30mn duration of a complex MDX query with many calculated members, using the NONEMPTYMEMBER token.

MDX Query Syntax error

I have a simple MDX query is shown in below:
SELECT [Accounts].[pv] ON ROWS,
[Reporting].Members ON COLUMNS
FROM RoggeBSO.Db
(please note that Accounts, pv and Reporting words are in square brackets)
When I execute this query on the MDX Script Editor (in EAS), I get the following syntax error:
Statement Executed with warnings.
Syntax error in input MDX Query on line 1 at token 'ON'
Unexpected Essbase error 1260052
I tried this on both ASO & BSO cubes but didn't work. Could anyone help please?
Regards
Chandra
Edited by: user2695091 on 22-Apr-2009 03:27

SELECT {[Accounts].[pv]} ON ROWS,
{[Reporting].Members} ON COLUMNS
FROM RoggeBSO.Db

MDX SUB VAR ERROR

Similar Messages

Maybe you are looking for