ME 013 Document type ZEBP is not allowed with doc. category B (Please check

We are creating shopping cart with specific items using XMA catalogue ME013 message comes
Shopping cart 0001008270 (Preq. 2900000012) : ME 013 Document type ZEBP is not allowed with doc. category B (Please check input)
Is it related to PO Document type configuration in R/3!
Document type ZEBP is not in table T160 (SAP Transaction Control) or Do I need to debug the BAPI_PO_CREATE1.

Hi
Which SRM and R/3 versions are you using ?
Some related useful pointers ->
Error: ME 013 Document type ECPO not allowed with doc. c ategory B
Re: Shopping cart contains error
Error: ME 013 Document type ECPO not allowed with doc. c ategory B
Hope this will definitely help. Do let me know.
Regards
- Atul

Similar Messages

Document type ZD does not allow you to assign to object MARA

hi ppl,
I have created a Z document type.but its not allowing me to assign in mm02.what might be the problem..? its throwing an error message Document type ZD does not allow you to assign to object MARA.

You need to enable object linking to mara on your new document type. Go to Tcode DC10, select the document type and then go to the object links area. Create a new object link for your document type.

ME013 Document type RD33 not allowed with doc. ca tegory B

When I try to post an SC, i get the following error: ME013 Document type RD33 not allowed with doc. ca tegory B. I am on SRM 5.0. I have maintained config (V_BBP_TARGET_OBJ) to create a PO if info complete and I have set up BSA in the org structure as ECPO. My SC has a source assigned and looks to be complete, yet the system seems to want to create a PR and it is having difficulty doing so. Any idea on how to troubleshoot this error message?

Hello Richard,
I guess RD33 is a PO doc type in your R/3 system.
In that case, that means your SC tries to create a PR, but with the PO doc type RD33.
But you said that you defined BSA = ECPO. So where comes RD33 from ?
Can you tell me what is RD33 in your R/3: PR or PO doc type ?
And if you have any reference to RD33 in SRM ?
Rgds
Christophe

Requisition doc. type RV not allowed with doc. type

Using the tcode ME51n, I created an Outline agreement(Doc type RV) and when i go to ME31K to create a contract and select With Ref to Purchase requisition and enter the Purchase requisition #, I get the error message Requisition doc. type RV not allowed with doc. type.
I tried changing the settings for doc types for contract, but it doesnt seem to be working. Any solutions will greatly beappreciated.

This is the settings in PR: SPRO-MM-Purchasing-PR-Define document type
Doc type: RV     Outl. agmt. requisn.     10     01     02     RVB     R
once above is correct than
select the doc type RV and click on the allowed item category
where can see as below
Item cat Text item category
     Standard
K     Consignment
D     Service
select the doc type RV and click on the Link purchase requisitio in left side
MK     Quantity contract     M     Material unknown          Standard
WK     Value contract          Standard                          Standard
WK     Value contract     K     Consignment          Standard
WK     Value contract     M     Material unknown          Standard
WK     Value contract     W     Material group          Standard
Now go to contract doe type
you will see
MK     Quantity contract     10     02     AZ          SAP     MKK
WK     Value contract     10     02     AZ          SAP     WKK
select any doc type and click on allowed item category
here you would see
     Standard
K     Consignment
L     Subcontracting
M     Material unknown
D     Service
than click on link purchase requisition by selecting doc type MK or WK
RV     Outl. agmt. requisn.          Standard          Standard
RV     Outl. agmt. requisn.          Standard     K     Consignment
RV     Outl. agmt. requisn.          Standard     M     Material unknown
RV     Outl. agmt. requisn.     K     Consignment     K     Consignment
RV     Outl. agmt. requisn.     D     Service     D     Service
once you have all this set up than you can create the contract based on the RV reqs

New Document Type Created but not allowing posting under that Document type

Hi Gurus,
I have created new document type 'JV' & assigned number ranges to that document type. But when I started posting the entries under this document type, system has thrown one error 'NO ACCOUNTING TRANSACTION VARIANT ASSIGNED TO FB01/JV'
Now after assigning transaction 000 (unspecified posting) & varaint 0001 to document type JV I can able to post the entry under this document type. (Classify document type for document spitting)
But I am not still sure whether my assignment to this particular document type is correct or not?
What is the basic criteria on the basis of which we have to select this assignment to particular document type?
Thanks
Sonal

What you have defined is correct. Since you are defining the document type jv meant for any type of posting and not restriciting like payments/receipts/vendors/customers.

Contract Type ZK to PO Type Z006 is not allowed

Hi Seniors,
While trying to create PO with doc type Z006 with ref to contract type ZK, it is showing error like
" Contract Type ZK to PO Type Z006 is not allowed "
If i check in SPRO, PO doc.type has been assigned with PR doc.type only not with contract doc.type and vice versa to contract doc.type to PR doc.type not with PO doc.type. How and where PO doc.type and Contract doc.type will directly link in order to check whether it is maintained or not. kindly advise.
Regards,
JanaMM

>
JanaMM wrote:
> Hi,
>
> Its not STO normal PO only. I am generally asking...if a PO is been created with ref to contract...the doc.type of both PO and contract should have been assigned somewhere i guess. Where that will be ?? kindly clear me plz..
> regards,
> janamm
For checking the document type of contract follow: spro>MM>Purchasing>contract>Define document type, here you will see document types created for contract.
For checking the document type of PO follow: spro>MM>Purchasing>Purchase Order>Define document type, here you will see document types created for PO.
Now to find a link between contract and PO, look up document type of contract LINK PURCHASE REQUISITION option, you will see what PR's can be created relating to a contract. Now look up PO document type with the above procedure, which will tell you which Po document is linked with Contract. SAP Standard Po document type is CONTRACT RELEASE ORDER, but if customized, the name or document type can be different.
Hope I am helpfull.

JITOM error movement type 000 is not allow (check your entry)

Hello experts,
In transaction JIOM i try to do an ACTION, but the system display below error message.
movement type 000 is not allow (check your entry)
Could you please help me this is very urgent..
Regards!!
Hugo

Hello Hugo,
Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
Can you check that the Item category is relevent for picking? (Transaction 0VLP)
Regards
Stephen

Error Addition to stock of material A in storage type 002 is not allowed

Dear all,
I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material A in storage type 002 is not allowed. Hence no storage bins can be entered. May I know under what scenarios this type error props up?
Thanks in advance,
Prashanth

Please find the explanation in SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
SPRO > LE > WM > Master Data > Define Storage Type
Check
- putaway strategy --> V_T3010-STEIN
- addition to existing stock indicastor ---> V_T3010-ZULAG
As you can read in the help, other factoers such as capacity may influence this.
Regards,
Csaba
Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Sales document type CR is not defined

Hello Experts:
I tried the Bapi_Salesdocu_Createwithdia to Create CR sales document table. In SE37 it works fine. But once moved into .net, when the proxy code trying to execute this
results = this.SAPInvoke("Bapi_Salesdocu_Createwithdia",new object[] {
Binary_Relationshiptype,Convert_Parvw_Auart,Sales_Header_In,Sales_Header_Inx,Salesdocument,Sender,Synchronous,Partneraddresses,Return0,Sales_Ccard,Sales_Cfgs_Blob,Sales_Cfgs_Inst,Sales_Cfgs_Part_Of,Sales_Cfgs_Ref,Sales_Cfgs_Value,Sales_Conditions_In,Sales_Conditions_Inx,Sales_Items_In,Sales_Items_Inx,Sales_Partners,Sales_Schedules_In,Sales_Schedules_Inx });
It returns a unhandle exception of
Sales document type CR is not defined
Anyone had experience with this? And have a solution for? Thanx

I just tried with "OR" and still doesn't work. Must be a sub reference or something! ??

HR payee type selection is not allowed in production mode

Hi All,
Does anyone has clue with this error 'HR payee type selection is not allowed in production mode processing" when i'm creating third party remittance evaluation run (new) PC00_m99_URME. I'm selecting Garnishment & child support payee from drop down as i want to post my garnishment amount through 3PR.
Any response would be needful.
Thanks,
KMM

SAP runs 3rd party remittance eval for a given payroll area / pay period as a whole (i.e. regardless of payee types) when this is run in production mode (i.e. only allows this fields to have values if you run in test mode). Therefore, when run in prod mode, this selection field should not have any values.

I have a full Team subscription to Creative Cloud, but type kit does not allow me to use some fonts. Do I have to pay extra to have more fonts available to me?

I have a full Team subscription to Creative Cloud, but type kit does not allow me to use some fonts. Do I have to pay extra to have more fonts available to me?

Hi drewacg,
I'm sorry that you ran into trouble with this. Are you the administrative contact on your Creative Cloud team subscription? The admin user doesn't receive the same set of services as a full seat, so you will have a Typekit Trial plan instead of the Portfolio plan.
You have the option of upgrading to the Portfolio level, though. If you would like to do that:
1) sign in at https://typekit.com/login with your Adobe ID and password
2) visit typekit.com/plans, and select the "upgrade" option underneath Portfolio
Your Typekit plan upgrade will be billed separately from your Creative Cloud payments. The Portfolio plan is $49.99/year.
I hope that this helps! If you have any questions, please feel free to send your Adobe ID information to [email protected] and we can look into it further for you. Best,
-- liz

FI CO Integation: Document type for real-time integration with FI not there

Dear Gurus,
This is the error message that I got and I am looking for a solution could anyone help me please.
I was doing simultaneous costing and doing Product Cost Collector reports.[KKBC_PKO]
This is IDES 6.00 ehancement package 4,
How do I define a document type for real-time integration with FI?
Message no. FAGL_COFI003
"Diagnosis: For CO documents to be transferred into Financial Accounting in company code 1000, -the system requires a document type".
How do I go about with this, need steps to resolve this please
Thank you
Saleem

Hi,
1. Check which variant is assigned to your company code '1000' using this IMG path
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg ->Assign variants for Real-time Integration to Company codes.
2. Check if document type is assigned to the variant assigned to your Company code in this path:
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg -> Define Variants for Real-Time Integration.
Hope this helps.

RFC Function Module - Message Reference parameters are not allowed with RFC

Hi,
Ive checked the Remote-Enabled Module radio button, declared Import and Export parameters using Type typing and checked the Pass Value in export and import parameters but I still receive message Reference parameters are not allowed with RFC and not able to activate the function module.
Am I missing something?
Regards,
...Naddy

Hi all,
I faced the same problem and solved it ,
You have defined a reference parameter for a remotely called
function module. However, only value parameters are allowed
for this type of module.
Procedure
Change the reference parameter to a value parameter.
Guys pls .don't leave the thread un-asnwered when you solved problem , post the solution it might be useful for others also.
Regards
Krishna Acharya

ME 013 Document type ZEBP is not allowed with doc. category B (Please check

Similar Messages

Maybe you are looking for